[Q] My Phone is complete Bricked, help me pls, nonstop restart - LG Optimus 3D

hi guys, (LG-P920 is my Phone)
yesterday i installed ROM MANAGER to install CWRMOD (or something like that).
Then i choose my Phone Type and flashed it. After that my phone permanent restarts in 1 second,
showing LG Logo and restart, restart restart nonstop.
I understand that i ****ed it up with flashing that recovery mod. So i decided to Plug into my PC
and install everything new, but when i connect my phone to PC , it detects a unknown device every second and does it permanently too. I tried the "Battery out, Volume Button UP and connect" trick, then it stops acting weird but my PC
dont recognise my phone as OMAP, it is just an unknown device
What should i do guys? i tried installing LG Support Tool, LG Mobile Driver, and i read all the Instruction to UNBRICK your phone.
But all the Instruction starts with a successful regocnition of OMAP driver, but my PC dont even recognise it as OMAP.
PLS HELP

ok i fixed it, it was a really complicated move to 0.1 sec click that omap and install while my Phone was permanent restarting.

Related

[q] !! Help !! P920 freeze on lg logo at startup

HELP NEEDED...
I Just installed a rom manager app then flash recovery thru Rom Manager..
then my phone restarted & freeze on lg logo... plz help..
The same happened to me, even when i put it to charge, it keeps rebooting (LG logo appears then reboot).
Even with the battery out, i've plugged into my USB and it keeps connecting and disconnecting. I've tried connecting it with the VOL+ pressed, it disconnects 2-3 times, and it remains connected; in Device Manager it appears as LGE Mobile USB Serial Port (COM12).
The drivers are installed; i've tried SmartFlashTool, i always get "We can't communicate with specific port"; i've tried LG Flash tool, nothing happens, it does not detect it..
Can anyome please help?
Drivers must be installed as in part 1 here
http://forum.xda-developers.com/showthread.php?t=2195753
Uninstall all LG drivers and software first, restart PC then install as explained. You must be logged onto PC as admin.
Thanks.. At step J nothing happens (everything is as it's supposed to be until here).. i'm about to give up...
In that case you may need this guide
http://forum.xda-developers.com/showthread.php?t=1942836
Or Karim Kahale's unbrick guide...
http://forum.xda-developers.com/showthread.php?t=2246001

[Q] Soft Brick on my Tablet ?

i think i have a soft brick on my tablet (Point of View Mobii 703) (The same: Allwinner A13)
i have booted the tablet into the upgrade mode, to install a custom rom with LiveSuit 1.11
but it says : no device seems to upgrade, i installed correctly the driver.
but i connected it again, it asks again for drivers, ok i install the same driver .... but it fails
disconnecting again and im trying to boot up normally, nothing happens, the tablet isnt going on.
its recognizing only on the pc, asking for drivers, but cant install driver. :crying:

[Q] Bricked SU870

Hi guys
i think i bricked my su870
as of now, if i connect it to a charger or press the power on button, it will only bootloop
LG logo appears then it restarted back
i tried to revive it by using the wkpark boot, but apparently my windows 8.1 cant even detect my phone as omap (i've removed the battery.also tried to plug the usb cable directly and even tried connect it while holding Vol + )
it just said Unknown USB Device (Device Failed Enumeration) in device manager and windows keep on connect/disconnecting it.tried to right click on it and update the driver.pointed it to the OMAP folder,but it just straight away said latest driver has been installed
try another cable and windows doesnt even detect the phone at all
any idea how do i revive this phone ?
thanks

[Completed] LG Volt - Can't factory reset or DL mode, not connecting with PC

Picked up a used LG Volt from eBay for cheap, seller said device is user-locked. First thing I noticed is this is a Boost phone and there is a Sprint sim installed. Thought someone might have been monkeying with the internals. The phone is pattern-locked. I have tried every conceivable combination of button presses/holds and the device will NOT enter recovery mode. All I get is the LG logo coming on and the notification light glowing, then the logo and light disappears, then the logo comes on for a couple seconds then back off again and keeps repeating this cycle.
I connected it to my PC but, since I can't unlock the screen I can't set the phone as a removeable drive and it does not connect to the PC. I have installed the LG Drivers and tried to put the phone in DL mode, however, it is still not recognized by the PC. If I open up device manager on my PC and then plug the phone in the device manager rolls up and back down again like it is trying to figure something out, but the device still does not show up . I have installed/uninstalled the drivers and rebooted my PC several times in hopes that it would connect. I have tried a couple of Android managers on the PC but they don't recognize the Volt either. I have booted the PC into Linux and tried to work with it there but, again, it is never recognized. I have read several post concerning flashing in DL mode, even installed LG Flash Tool, but since the Volt isn't recognized the procedure comes to a halt. I read about ADB but I can't unlock the phone to set debugging and, I believe, the phone needs to be recognized by the PC.
If I could just get past the pattern-lock or get the PC to connect to the phone I feel I might have a chance fixing it.
Hi,
Thanks for using XDA assist.
There is a dedicated thread for you to post this question:
New LG Volt LS-740
Over there, you can receive specialized help from experts.
Good Luck! - gsstudios

Can't install the mtk or preload or whatnot drivers on win7

Hello my Lenovo A850 blew off its own software, it just did in the middle of a call, that has happened before as far as the old owner told me, I am trying to install the drivers to flash it with flashtool but it just doens't work, I even forcefully installed the drivers but it still does not recognie the phone. I connect the phone via USB and the red led turns on, but apart from that, nothing. Any advice?

Categories

Resources