Related
Is it 2a?
I pre-ordered it and wish to have backup wall/car chargers ready to go for next week.
Tnx
It's a 2A Quickcharge 1.0 unit. Quickcharge boosts the voltage (to ~9v from 5v) when the phone is less than 50%, so you can't get just ANY 2 amp charger and expect it to work as quickly.
If you care (or are willing to wait) Quickcharge 2.0 wall plugs should ship in ~2 months. That boosts the input to 15 volts (IIRC) and will supposedly charge from 0% to 100% in about 45 minutes.
yeah I guess I can wait. I can always keep an old 1a plug by the bed for long overnight charges.
Does samsung sell oem chargers at release date?
9V 1.67A and 5V 2A is what it says on the charger
9V 1.67A is the rapid charging part
it's a dual voltage charger. 5v @ 2.0A and 9v @ 1.67A
For some unknown reason, I have a 2.1 amp car charger and cheap 1 amp ac charger. My HTC One M7 charge slow but the Note 4 charge much faster using the same charging device. I dont know what it is, but I like it!
So the charger on Samsung's website is not the same one that came with the Note 4?
http://www.samsung.com/us/mobile/cell-phones-accessories/ETA-U90JWEBXAR
chong67 said:
For some unknown reason, I have a 2.1 amp car charger and cheap 1 amp ac charger. My HTC One M7 charge slow but the Note 4 charge much faster using the same charging device. I dont know what it is, but I like it!
Click to expand...
Click to collapse
I think it's the Fast Charging 2.0 hardware in the Note 4?
catscanmeow said:
I think it's the Fast Charging 2.0 hardware in the Note 4?
Click to expand...
Click to collapse
Not sure it has anything to do with the Fast Charging hardware. The Fast Charging works with the provided charger, which is a dual voltage one. I used my iPhone's/iPad's car charger with my Note 4 and didn't notice a speed-up in charging time.
On a tangential note: I can't find anyone who sells the Note's fast charger separately yet and I needed another one for use with the Note 4 at the office. So I used the Asus charger that came with my original 3G Nexus 7 (which remains forgotten on a shelf). It works pretty well. I noticed that the Asus charger charged all my handsets (HTC One M8, Nexus 5, Z2, Oppo Find 7) pretty reliably -- the M8 and Nexus 5 seemed to charge faster compared with their stock chargers.
Anyone who's held the Asus charger knows it's a little bit bulkier and a few ounces weightier than the usual chargers that come with smartphones these days so there may be a hardware component to it. Whatever it is, it's probably the best standalone charger I've had the cables connect via a USB port so you can use it with your iPhone too.
If you can find at a garage sale or some random tech shop, you should pick one up. Works great with everything.
matrix2004 said:
So the charger on Samsung's website is not the same one that came with the Note 4?
http://www.samsung.com/us/mobile/cell-phones-accessories/ETA-U90JWEBXAR
Click to expand...
Click to collapse
it's different
jpbl1976 said:
So I used the Asus charger that came with my original 3G Nexus 7 (which remains forgotten on a shelf). It works pretty well. I noticed that the Asus charger charged all my handsets (HTC One M8, Nexus 5, Z2, Oppo Find 7) pretty reliably -- the M8 and Nexus 5 seemed to charge faster compared with their stock chargers.
Click to expand...
Click to collapse
Dude how many phones do you own !
View attachment 4002691
Like this support for gala×y Note 4
Sent from my SM-N910G using Tapatalk
Any suggestions? I'm looking for something that can do the quick charging in the car, is that even possible? Can it be done with a dual port so my wife and I can use the quick charger at the same time?
http://www.amazon.com/Charger-PowerIQ-Technology-Samsung-Motorola/dp/B00M43S18Y/ - Would this one support quick charging in the car?
Also,
http://www.amazon.com/Anker®-Extra-Premium-Android-Samsung/dp/B00NPP7TVU
This is basically the same cable that came with my S6 just longer correct? The included cable is too short to plug in near my night stand.
Any charger that is a 2amp charger... and any cable.. i have tried all my old cables on the s6 charger... all allow fast charge... and its charger is 2amp.... same as nexus 7 and all other newer devices... so just go with a 2 amp charger and enjoy the fast charge. And yes they make dual port 2 amp chargers... usually 1 port is 2 amp and second one is like 1 or 1.4amp... i have 2 cheap ones from amazon myself... will test them with the phone tomorrow and update you.
Comando156 said:
Any charger that is a 2amp charger... and any cable.. i have tried all my old cables on the s6 charger... all allow fast charge... and its charger is 2amp.... same as nexus 7 and all other newer devices... so just go with a 2 amp charger and enjoy the fast charge. And yes they make dual port 2 amp chargers... usually 1 port is 2 amp and second one is like 1 or 1.4amp... i have 2 cheap ones from amazon myself... will test them with the phone tomorrow and update you.
Click to expand...
Click to collapse
any cable will work, but not every 2.0A charger will work. i tested it with a 2.0A (not the Samsung one) charger and "fast charging" did not show up in the phone.
AFAIK, you have to use one of Samsung's OEM chargers or one capable of the Quick Charge 2.0 standard for adaptive fast charging.
OP, i only did a cursory search, but i found this dual Quick Charge 2.0 charger that might meet your needs: http://www.amazon.com/dp/B00TGD79X8?psc=1
Interesting, I didn't think to check for QC 2.0. I was thinking the Anker one did that. Thanks!
That being said though, anyone have experience with any of them with how they hold up?
Verizon sells one, it is their generic branding, it's the only one that I have seen or tried that is marketed that it is QC 2.0, works great even has a built in LED flash light basically. Sucks that it is $34.99 though.
http://www.verizonwireless.com/accessories/verizon-vehicle-charger-with-fast-charge-technology-for-micro-usb/
From my understanding Quick Charge 2.0 is a Qualcomm Snapdragon 801 (or newer) processor feature. The Galaxy S6 is running Samsung's Exynos 7420 processor which features Adaptive Fast Charging. I don't know how they vary in terms of performance, but I do know that when I plug in my Quick Charge 2.0, my S6 recognizes it as a fast charger. Battery went from 40% to 63% in 13 mins so I'm assuming both charging standards are compatible lol..
Try this car charger, worked great for my Qualcomm based phones.
http://www.amazon.com/gp/product/B008VMP90A/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
th3b055 said:
From my understanding Quick Charge 2.0 is a Qualcomm Snapdragon 801 (or newer) processor feature. The Galaxy S6 is running Samsung's Exynos 7420 processor which features Adaptive Fast Charging. I don't know how they vary in terms of performance, but I do know that when I plug in my Quick Charge 2.0, my S6 recognizes it as a fast charger. Battery went from 40% to 63% in 13 mins so I'm assuming both charging standards are compatible lol..
Try this car charger, worked great for my Qualcomm based phones.
http://www.amazon.com/gp/product/B008VMP90A/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
Click to expand...
Click to collapse
i'm reasonably sure it's the same standard. the Note 4 (Snapdragon 805) is listed on Qualcolm's website as compatible with QC 2.0. however, if you look at Samsung's website, it only lists Adaptive Fast Charging. Samsung just rebranded QC 2.0 as their own Adaptive Fast Charging. you can use all devices interchangeably.
also, the OP wanted a dual port QC 2.0 charger. that one only has 1 port w/ QC 2.0
I have already Anker 2 amp car charger in hand and i was thinking it wont be fast enough , i have seen video where quaclom demonstrated that Quick charging is faster than 2 amps charging , and judging by the fact that Samsung is providing comparable charging time with stock charger i was thinking that it is more than 5V 2.0 Amps .. too bad i am waiting for my phone to arrive.
http://www.amazon.ca/gp/product/B00SJU6EIK?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
I just purchased this.
I purchased this one from amazon when I had my Note 4 and I can confirm it works great with the S6. http://www.amazon.com/gp/product/B00P9UILUM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
1lazysheep said:
any cable will work, but not every 2.0A charger will work. i tested it with a 2.0A (not the Samsung one) charger and "fast charging" did not show up in the phone.
AFAIK, you have to use one of Samsung's OEM chargers or one capable of the Quick Charge 2.0 standard for adaptive fast charging.
OP, i only did a cursory search, but i found this dual Quick Charge 2.0 charger that might meet your needs: http://www.amazon.com/dp/B00TGD79X8?psc=1
Click to expand...
Click to collapse
Yep. Your right sir. Just tried all my 2.0 / 2.1 amp chargers... not quick charging... guess ill grab some qc 2.0 amp chargers from amazon for car and backups.
alnova1 said:
I purchased this one from amazon when I had my Note 4 and I can confirm it works great with the S6. http://www.amazon.com/gp/product/B00P9UILUM/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
This is the one I was looking at, thanks!
Anyone know of a portable battery that fast charges (real fast charging)?
I know of these:
http://www.aukey.com/product/pb-t1-fast-charge-battery-charger (I read that the s6 supports qualcomm 2.0)
http://www.alibaba.com/product-detail/get-through-qualcomm-quick-charger-2_60195548667.html (not really commercially available)
I also would be interested in a powerbank that is compatible with fast charging the S6 / S6 Edge.
And I too came across the Aukey powerbank.
But I didn't find the information if the S6 is compatible with Quick Charge 2.0, as this was developed by Qualcomm.
XQC said:
I also would be interested in a powerbank that is compatible with fast charging the S6 / S6 Edge.
And I too came across the Aukey powerbank.
But I didn't find the information if the S6 is compatible with Quick Charge 2.0, as this was developed by Qualcomm.
Click to expand...
Click to collapse
I purchased both wall and car chargers that were Qualcomm 2.0 quick charge technology compatible and both utilize the quick charge capabilities of the S6 flawlessly.
junksecret said:
I purchased both wall and car chargers that were Qualcomm 2.0 quick charge technology compatible and both utilize the quick charge capabilities of the S6 flawlessly.
Click to expand...
Click to collapse
Cool! Thanks for the confirmation
I purchased the Aukey one you linked over the weekend and should be getting it today. I'll let you know how it is but it advertises that its quick charge 2.0 capable so we'll see.
The Aukey isn't in stock anymore on Amazon. I would have bought it. Thanks, please let us know.
Hey,dear,,,,,,,you are right..choose a good charger is very important.
I bought the Aukey. I only tried it once so far, but it works exactly as advertised. It shows up on the phone as a fast charger. It is a bit heavier than I would like, but I won't be carrying it everywhere, so.
Even with the same cable, recharging the Aukey took a lot longer than charging the phone. I don't know if that's weird or too be expected.
LynnL said:
Even with the same cable, recharging the Aukey took a lot longer than charging the phone. I don't know if that's weird or too be expected.
Click to expand...
Click to collapse
Well the Aukey is 10000mah and the phone is like 1/5 of that so it should take longer to charge.
Tikerz said:
Well the Aukey is 10000mah and the phone is like 1/5 of that so it should take longer to charge.
Click to expand...
Click to collapse
Right, but I'd only used it to recharge the phone once. It was fully charged when I started.
LynnL said:
Right, but I'd only used it to recharge the phone once. It was fully charged when I started.
Click to expand...
Click to collapse
The Aukey is getting charged with maximum 2 Amps on 5V if it the advertising is correct ,, personally i think it is 1.0A on 5V and your phone got charged with quick charge which is faster , also if you take efficiency into consideration , if the Aukey where to deliver 2000 mah to your phone then it will consume at least 2500 mah to do that .
Aukey will be available April 20. I put my order in on amazon.
BTW, you can fast charge the Aukey if you're getting slow charge times.
Have you seen this one?
http://www.ipoweradd.com/poweradd-pilot-s-12000mah-battery-charger-for-samsung-s5-s4_p1270.html
It looks a good option
Just got this bad boy, so far so good, two charging ports, 1 @ 2.1Amps, the other at 1am. The 2.1Amp side charges pretty fast. Not the cheapest but looks like good quality
Comes with a cool case too
http://www.amazon.com/gp/product/B00CKGAE94/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
So the Aukey arrived and yes it does fast charge (says so in the pull down).
It's a little heavy and the plastic finish on both sides is slightly scratched (only noticeable) under light, but it seems to be the product to get right now.
Amazon link to Aukey fast charger
Here is the link to Amazon: http://www.amazon.com/Aukey-10000mAh-Portable-External-Supported/dp/B00UBDI7EC
is there any word on release date of the official samsung battery back ?
the actual samsung branded one.
The Aukey is a rip off of the Unu battery chargers. The Unu can fast charge for certain. I've had it for months now and love it.
chnzshyguy said:
Here is the link to Amazon: http://www.amazon.com/Aukey-10000mAh-Portable-External-Supported/dp/B00UBDI7EC
Click to expand...
Click to collapse
Argghhh out of stock.....
Fast charge as in qualcomm 2.0?
Basically, when the charger is unplugged, the adapter runs in 5V mode, which is safe and good. But when the tablet is connected, then it is upgraded to 9V mode. any USB devices connected with a splitter on the charger wire will receive 9V also! This near doubling of voltage could cause devices to be fried, so make sure your Huawei power adapter isn't powering any hubs!!
YouTube demo video coming soon, overvolting a fan!
Good catch!
Thanks for sharing.
I thought charges and/or device ports had a regulator to control input voltage?
CorruptedSanity said:
Good catch!
Thanks for sharing.
I thought charges and/or device ports had a regulator to control input voltage?
Click to expand...
Click to collapse
Most electronics with a USB port will only be rated for say 5v, or maybe 6v to allow for naughty USB power supplies. 9v is nearly double 5v, and on sensitive low-tech chargers, like resistive ones that charge 18650 or whatever, you could expose the battery to a much higher voltage than what it should have, which could cause an explosion or whatever. I used a fan since it should be able to handle the extra voltage quite happily.
What do you mean fan?
Used a fan to cool what?
Michaelflat1 said:
Basically, when the charger is unplugged, the adapter runs in 5V mode, which is safe and good. But when the tablet is connected, then it is upgraded to 9V mode. any USB devices connected with a splitter on the charger wire will receive 9V also! This near doubling of voltage could cause devices to be fried, so make sure your Huawei power adapter isn't powering any hubs!!
YouTube demo video coming soon, overvolting a fan!
Click to expand...
Click to collapse
There is not problem at all. Qualcomm charge technology and USB 3.1 do the same. The charger and the device negotiate what voltage they want to send the same power but less current (more efficient). You are not supposed to o what you did, it your fault and not from Huawei.
pmj_pedro said:
There is not problem at all. Qualcomm charge technology and USB 3.1 do the same. The charger and the device negotiate what voltage they want to send the same power but less current (more efficient). You are not supposed to o what you did, it your fault and not from Huawei.
Click to expand...
Click to collapse
what I was getting at is that if you were to use a splitter, like I did, then be careful, as the voltage might raise. This is not a concern most of the time, but it's good to just be careful.
My OnePlus 5T and it's dash charging only works when these 3 conditions are satisfied:
Dash charger
Stock OnePlus lead
Nothing else plugged in
otherwise it will default down to normal. It's a shame that this didn't happen on the Huawei charger, but hopefully this means that it will be easier for implementation for powerbanks, I can't find any dash charge power banks. And also apparently Huawei phones usually play nice with other chargers. (USB-C power delivery I'm not sure on this device).
Michaelflat1 said:
what I was getting at is that if you were to use a splitter, like I did, then be careful, as the voltage might raise. This is not a concern most of the time, but it's good to just be careful.
My OnePlus 5T and it's dash charging only works when these 3 conditions are satisfied:
Dash charger
Stock OnePlus lead
Nothing else plugged in
otherwise it will default down to normal. It's a shame that this didn't happen on the Huawei charger, but hopefully this means that it will be easier for implementation for powerbanks, I can't find any dash charge power banks. And also apparently Huawei phones usually play nice with other chargers. (USB-C power delivery I'm not sure on this device).
Click to expand...
Click to collapse
I am just annoyed that Huawei do not use QC or USB-PD standards and I must use their charge to charge fast. I do not mind the 9v as my QC devices charges fast on the Huawei charger but not the other way round, forcing me to either change all my chargers or carry an extra charger.
Not sure if you are talking about FCP for in or out of powerbank, I have a Tronsmart powerbank that supports both QC3 and FCP out. It also supports QC in, which means it MAY charge faster with the Huawei's stock charger. I had not tested it that way yet but I think it should as the Huawei charger charges my other QC devices at QC speed.
Tronsmart Presto Power bank:
https://www.tronsmart.com/products/tronsmart-presto-10000mah-quick-charge-3-0-power-bank
Note that their own specifications regarding the input is incorrect, this picture shows the actual specifications behind the device, which shows it can take [email protected] in.
https://the-gadgeteer.com/wp-content/uploads/2017/07/tronsmart-presto-3.jpg
Also refer to my thread from a while back discussing FCP and QC.
https://forum.xda-developers.com/mediapad-m5/help/m5-quick-charge-t3822277
alvinlwh said:
I am just annoyed that Huawei do not use QC or USB-PD standards and I must use their charge to charge fast. I do not mind the 9v as my QC devices charges fast on the Huawei charger but not the other way round, forcing me to either change all my chargers or carry an extra charger.
Not sure if you are talking about FCP for in or out of powerbank, I have a Tronsmart powerbank that supports both QC3 and FCP out. It also supports QC in, which means it MAY charge faster with the Huawei's stock charger. I had not tested it that way yet but I think it should as the Huawei charger charges my other QC devices at QC speed.
Tronsmart Presto Power bank:
https://www.tronsmart.com/products/tronsmart-presto-10000mah-quick-charge-3-0-power-bank
Note that their own specifications regarding the input is incorrect, this picture shows the actual specifications behind the device, which shows it can take [email protected] in.
https://the-gadgeteer.com/wp-content/uploads/2017/07/tronsmart-presto-3.jpg
Also refer to my thread from a while back discussing FCP and QC.
https://forum.xda-developers.com/mediapad-m5/help/m5-quick-charge-t3822277
Click to expand...
Click to collapse
I know your trouble, I have a OP5t, and that charges at 7.5W from my Huawei charger, when it can charge at 20W using dash charger, my mediapad charges at 10W from the dash charger, out of 18w capability. I do look silly carrying round two chargers with the same plug on them!!
Yeah no dash charger power bank, at least there is a Huawei FCP one like you said, I might get that as my next one, but I've got a lovely EC technologies powerbank, and that only does 10W no matter what, shame really as it is 82whr (massive!).
Michaelflat1 said:
I know your trouble, I have a OP5t, and that charges at 7.5W from my Huawei charger, when it can charge at 20W using dash charger, my mediapad charges at 10W from the dash charger, out of 18w capability. I do look silly carrying round two chargers with the same plug on them!!
Yeah no dash charger power bank, at least there is a Huawei FCP one like you said, I might get that as my next one, but I've got a lovely EC technologies powerbank, and that only does 10W no matter what, shame really as it is 82whr (massive!).
Click to expand...
Click to collapse
Luckily (for me at least!), I do not normally carry my M5 around and therefore do not need quick charge on it. Even if taken on holiday, it can charge overnight in the hotel. However this put me off Huawei (and OnePlue, Oppo and any other brands that do not use QC standards) for my future purchase.
Wow, I didn't realize how bad this bites. MediaPad was my first QC3 device. Used it's charger in my bedroom. Then got a LG v35 QC3 phone last week to replace old Nexus 6P (USB C-PD). So excited to see the Huawei charger fast-charging both devices. So irritating to now realize that the LG QC3 charger won't fast charge the M5!
And Huawei is using a proprietary QC3 charging mechanism? ie. are there any compatible chargers on Amazon or only the charger from Huawei will fast charge the M5?
StephenMSmith said:
Wow, I didn't realize how bad this bites. MediaPad was my first QC3 device. Used it's charger in my bedroom. Then got a LG v35 QC3 phone last week to replace old Nexus 6P (USB C-PD). So excited to see the Huawei charger fast-charging both devices. So irritating to now realize that the LG QC3 charger won't fast charge the M5!
And Huawei is using a proprietary QC3 charging mechanism? ie. are there any compatible chargers on Amazon or only the charger from Huawei will fast charge the M5?
Click to expand...
Click to collapse
Sorry, Huawei does not use QC standards but their own FCP/SCP instead. QC chargers will not fast charge Huawei gear but Huawei charger MAY charge QC gear fast.
So if I plug my M5 into a standard QC3.0 charger (9v I think), does it at least charge somewhat faster than a standard, non-QC charger? I would assume so. And are they're any 3rd party fasxt chargers compatible w/Huawei's dumbarse proprietary QC3 charging?
StephenMSmith said:
So if I plug my M5 into a standard QC3.0 charger (9v I think), does it at least charge somewhat faster than a standard, non-QC charger? I would assume so. And are they're any 3rd party fasxt chargers compatible w/Huawei's dumbarse proprietary QC3 charging?
Click to expand...
Click to collapse
No it doesn't, as confirmed by a V/A USB meter. It will only top out at 5V/2A.
I repeat again, Huawei does NOT use QC3 technology, but FCP/SCP technology. If you are looking for a charger that can do both QC and FCP from the same socket, read through the tread again as I had already posted a brand and model that had been tested and confirmed to do both.
Ah, sorry, me dumb and had in my head that M5 was QC3. Now I get it -- FCP, not same as QC3. OK, I see your link and several other chargers compatible w/QC3 and FCP. Thanks!
Hi,
I have a ThinkPad E580 which comes along with a charger Type-C, on the charger has been written : OUTPUT: 20V-3.25A / 15V-3A / 9V-2A / 5V-2A
Is it safe to try charge my MediaPad M5 by this charger?
sz.hatef said:
Hi,
I have a ThinkPad E580 which comes along with a charger Type-C, on the charger has been written : OUTPUT: 20V-3.25A / 15V-3A / 9V-2A / 5V-2A
Is it safe to try charge my MediaPad M5 by this charger?
Click to expand...
Click to collapse
I had used USB PD adaptors on the M5 before and it charges fine, but not quickly.
My Pad (M5 10.8 WiFi) charges via USB PD with 18 Watts using the 9 Volt Profile. What doesn't work is Quick Charge. Power delivery works fine
Is there anything special about the actual Huawei furnished cable? I need a longer one than what was furnished.
reubenray said:
Is there anything special about the actual Huawei furnished cable? I need a longer one than what was furnished.
Click to expand...
Click to collapse
Nothing whatsoever
But get a good one that supports high wattage.
Some cables only transmit 5 watts
Meaning 5v and 1 amp
Technology from 2005
I have a basic cheap qi charger I used with my last phone, never had an issue. With my Mi 10 Ultra it only charges correctly like 1/10 times when I place it down on the charger. The weird thing is it shows it's charging, the pad and phone get warm which means electricity is flowing somehow, but the phone drops in battery instead of charging... I don't even know what to say or do. Kind of tempted to buy that 55w wireless charger though.
I had a similar issue but found that I had a few stock apps going in the background draining the battery quicker than it could charge (it was a cheap low wattage charger). Force closed the apps and killed a couple of processes and it steadily increased. Not ideal but I took that as a sign of using a cheap wireless charger.
Still on the stock chinese Rom until I get out of unlock jail so if you're on the EU Rom this might not help.
I bought the 55W wireless charger with my phone and it's brilliant.
I tested my previous Samsung 15w wireless charger & Huawei 15w charger with the Ultra and the charging speed was a trickle (according to Accubattery app) and near unusable on the phone so will probably go for the Xiaomi 55w charger from Aliexpress which some sellers seem to be offering the 65w charging brick with.
Will sell the 2 chargers I have whci should pay for the replacement
Does anyone have a source other than aliexpress/baba for the 55w wireless charger? I don't want to wait over a month for it.
Eh... I found other sites where it cost more and took longer to ship. I decided the fastest way to get it was to buy it from the fastest shipping seller on aliexpress and not delay any more
mine seems to have stopped saying fast charging when using my wireless charger, possibly since moving to the EU rom.
Just as proof this phone has something fundamentally wrong with its Qi charging compatibility, the charger only draws 2-3w from the wall when it's not working right. It uses 8+ when it's charging right. That's not the charger. The phone is doing something wrong.
2-3w appears to be what it draws when it's doing the detection algorithm to make sure it's compatible and will accept a charge. It does the same thing on my old s20+ but then goes up in wattage when it's actually charging to 9+.
I am using the 20W wireless car charger together with the 55W wireless charger (with 65watt GAN charger), and both of them works fine and fast. Just to beware that the car wireless charger is quite heavy and may stress your AC vents.
Something has definitely changed since moving to the EU rom. On the CN rom, it would activate the fan in my Huawei charger and say fast charging, now no fan and no fast charging.
Have you added it as a bug on the EU forum. It's ok noting it here but it needs to go on the bugs list to be noticed