FRD-AL00 Rescue mode only - Honor 8 Questions & Answers

Hi there. I tried to flash a custom rom to a Honor 8 via TWRP, but the flash has stopped. Now it writes when booting:
Rescue mode
[...]
Error!
Func NO: 14 (IOM3 image)
Error NO: 1 (security verify failed!)
I can't enter recovery, eRecovery, the system isnt boot.
I can enter fastboot, and the bootloader is unlocked.
I have flashed the stock rom in fastboot mode (Update.app extracted with Huawei Update Extractor)
BOOT.IMG
CUST.IMG
RECOVERY.IMG
SYSTEM.IMG
but the problem is still there.
Can anyone knows, how to repair this?

i have the same problem can anyone help

Yes finally i have fixed it.
Steps to follow:
1. First format internal storage system cache and other using custom recovery use twrp recovery. Find on the internet u will find it fairly easily.
2. After formating use fastboot to revert to stock recovery.
3. Use a fresh memory card and copy update.app in dload folder to your sd card. make sure u have faster sd card or ur device may freeze i used samsung class 10 sd card. tried with other cheap ones but no luck faster will help.
4. then insert it in your device.
5. turn off the device and immediately press and hold volume + and volume - at the same time hold till force emui appear then you are all set let update complete. (note your device needs to be fully charged.)
6. Then let it sit it will reboot automatically and now you are up my friend hope it will help you i personally tried it and worked cannot find any help on the internet so i took the risk but it worked.
---------- Post added at 05:41 PM ---------- Previous post was at 05:39 PM ----------
Rommco05 said:
Somewhere in question and answer is thread and in is same problem, but I don't remember name of thread and if is solved, later in night I will check
Click to expand...
Click to collapse
There are no threat about fixing huawei untill now but i have provided the steps down below. Hope it will help him. I took the risk for this even the huawei service center cannot fix the device so i brought it back from them and tried by myself and it worked its safe.

Rommco05 said:
I mean is thread, and somewhere in this thread is same problem... but good to know u solved!!
Click to expand...
Click to collapse
Thank you and willing to help if any one need

[email protected] said:
Thank you and willing to help if any one need
Click to expand...
Click to collapse
Hai shrishak , can i know if u are al10 user ? I need some info from u plz .

gopinaidu77 said:
Hai shrishak , can i know if u are al10 user ? I need some info from u plz .
Click to expand...
Click to collapse
hey, bro,Im al00 user,I think I can provide you the info you need.
al00 is same as al10 except internal storage (al00 is 32G,al10 is 64G)

[email protected] said:
hey, bro,Im al00 user,I think I can provide you the info you need.
al00 is same as al10 except internal storage (al00 is 32G,al10 is 64G)
Click to expand...
Click to collapse
Great bro . Does it support dual sim ?

gopinaidu77 said:
Great bro . Does it support dual sim ?
Click to expand...
Click to collapse
yes,it supported.
This is bands it supports:
TDD-LTE:B38(2600)/ B39(1900)/ B40(2300)/ B41(2500)
FDD-LTE:B1(2100)/ B3(1800)/ B4(1700)/ B7(2600)
TD -SCDMA:B34 / B39
WCDMA:B1 / B2 / B4 / B5 / B8
CDMA2000 / 1X:BC0(800MHz)
GSM:850/900/1800 / 1900MHz

[email protected] said:
yes,it supported.
This is bands it supports:
TDD-LTE:B38(2600)/ B39(1900)/ B40(2300)/ B41(2500)
FDD-LTE:B1(2100)/ B3(1800)/ B4(1700)/ B7(2600)
TD -SCDMA:B34 / B39
WCDMA:B1 / B2 / B4 / B5 / B8
CDMA2000 / 1X:BC0(800MHz)
GSM:850/900/1800 / 1900MHz
Click to expand...
Click to collapse
So u owm a 32gb variant and a dual sim version is it ?
Can u let me know the full model info ?.
Please .. i was trying to enable dual sim in a single sim version so am collecting much info to do that.
Hope u have some patience to give the info.
Thank you
--regards--

gopinaidu77 said:
So u owm a 32gb variant and a dual sim version is it ?
Can u let me know the full model info ?.
Please .. i was trying to enable dual sim in a single sim version so am collecting much info to do that.
Hope u have some patience to give the info.
Thank you
--regards--
Click to expand...
Click to collapse
Yes,I have a al00, 32g varient,and it only sale in China.
The full model is FRD-AL00C00B00.
Did you need system prop file?I can sent to you.
Sorry for my bad English .?
regards.

[email protected] said:
Yes,I have a al00, 32g varient,and it only sale in China.
The full model is FRD-AL00C00B00.
Did you need system prop file?I can sent to you.
Sorry for my bad English .?
regards.
Click to expand...
Click to collapse
Thats soo long . Merely that info is incomplete for me , can u plz get me screenshot of this ?
Follow these steps.
Dial:
*#*#2846579#*#*
Network information
Vendor
Screen it

gopinaidu77 said:
Thats soo long . Merely that info is incomplete for me , can u plz get me screenshot of this ?
Follow these steps.
Dial:
*#*#2846579#*#*
Network information
Vendor
Screen it
Click to expand...
Click to collapse
OK, please wait me a minute,I need to reflash update.zip because I deleted engineering mode app.

gopinaidu77 said:
Thats soo long . Merely that info is incomplete for me , can u plz get me screenshot of this ?
Follow these steps.
Dial:
*#*#2846579#*#*
Network information
Vendor
Screen it
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks alot my frn . And now can u plz share the oeminfo . U can backup oeminfo from hwmt tools .

gopinaidu77 said:
Thanks alot my frn . And now can u plz share the oeminfo . U can backup oeminfo from hwmt tools .
Click to expand...
Click to collapse
OK,I upload cust.bin and oeminfo in here.
By the way, could you plz sent me L04 oeminfo?
I wanna change my phone's model to l04.
Thank you.

[email protected] said:
OK,I upload cust.bin and oeminfo in here.
By the way, could you plz sent me L04 oeminfo?
I wanna change my phone's model to l04.
Thank you.
Click to expand...
Click to collapse
well , here it is my frn .

gopinaidu77 said:
well , here it is my frn .
Click to expand...
Click to collapse
It really puzzled me that AL00 has no singal after flashed Linage OS or orther custom roms.
So I decide to rebranding it to L04.
Thank you.

[email protected] said:
It really puzzled me that AL00 has no singal after flashed Linage OS or orther custom roms.
So I decide to rebranding it to L04.
Thank you.
Click to expand...
Click to collapse
U can do it without hesitation. But intimate me after rebranding. Happy flashing bud :fingers-crossed:

[email protected] said:
Yes finally i have fixed it.
Steps to follow:
1. First format internal storage system cache and other using custom recovery use twrp recovery. Find on the internet u will find it fairly easily.
2. After formating use fastboot to revert to stock recovery.
3. Use a fresh memory card and copy update.app in dload folder to your sd card. make sure u have faster sd card or ur device may freeze i used samsung class 10 sd card. tried with other cheap ones but no luck faster will help.
4. then insert it in your device.
5. turn off the device and immediately press and hold volume + and volume - at the same time hold till force emui appear then you are all set let update complete. (note your device needs to be fully charged.)
6. Then let it sit it will reboot automatically and now you are up my friend hope it will help you i personally tried it and worked cannot find any help on the internet so i took the risk but it worked.
---------- Post added at 05:41 PM ---------- Previous post was at 05:39 PM ----------
There are no threat about fixing huawei untill now but i have provided the steps down below. Hope it will help him. I took the risk for this even the huawei service center cannot fix the device so i brought it back from them and tried by myself and it worked its safe.
Click to expand...
Click to collapse
Can you please give the link for TWRP you used

venugopalu007 said:
Can you please give the link for TWRP you used
Click to expand...
Click to collapse
What will u do with that?

Related

[GUIDE]All Huawei new&old phones-Install Stock Rom-Full Reset

Here is how you do a Complete reset on all huawei android phones!
This resets everything and bring your phone to state when you first purchased it!
PLEASE BACKUP EVERY SENSITIVE DATA AS YOU WILL LOOSE EVERYTHING YOU HAVE ON PHONE!
Procedure:
1)Download a stock ROM from
Try using rom based on/closer to your region/country/operator. Better see for a pdf file inside the archive for your device compatiblity.
FOR PC SoftWares AND DRIVERS Click here and more cool stuff for your huawei phone click here
2) Format your SD card in FAT32(NO NEED TO FORMATE IF ITS ALREADY FAT32)
3)create a folder "dload" off course without the quotes on to the root of your SD card.
3) Extract the UPDATE.APP from the stock ROM and place it in "dload"
4) Power off your phone with sd card inside.
5)Power on by pressing POWER+RED BUTTON+VOLUME UP Button if done properly you will see progress bar saying UPDATING!
after its done it will reboot automatically and YOUR phone good as NEW!!!!!
IF YOU LIKE MY WORK DONT FORGET TO PRESS"THANKS"BUTTON!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does this method restore the original recovery?
EDIT: Just tested it and it does.
wachw said:
Does this method restore the original recovery?
Click to expand...
Click to collapse
It did for me....but original is crapy!
veer1238 said:
It did for me....but original is crapy!
Click to expand...
Click to collapse
Just wanted to test whether the latest stock rom had multitouch enabled by default. And also whether it returns the recovery to default in case my phone ever needs to be repaired under warranty.
wachw said:
Just wanted to test whether the latest stock rom had multitouch enabled by default. And also whether it returns the recovery to default in case my phone ever needs to be repaired under warranty.
Click to expand...
Click to collapse
It suppourts mult-touch tested my self! And it does restore original recovery
Yeah i'd also tried it myself. I like the boot animation though. At least that's one thing I can take from it.
wachw said:
Yeah i'd also tried it myself. I like the boot animation though. At least that's one thing I can take from it.
Click to expand...
Click to collapse
Lol...also a file browser...!
I will hang on to this as my Guardian Angle! Tkx for your awesome work!
PakRatt said:
I will hang on to this as my Guardian Angle! Tkx for your awesome work!
Click to expand...
Click to collapse
Your welcome
helo sir iam new to android iam trying to backup my rom using rom manager bt its ideos u8150 not supprted iam using latest version 4.0.0.5 plzzzz telll me how to backup my orignal rom thanks
PakRatt said:
I will hang on to this as my Guardian Angle! Tkx for your awesome work!
Click to expand...
Click to collapse
+1 me too here, thanx for the info
using clockworkmod recovery
i followed your instructions. unfortunately, i installed Cwod recovery. the official ROM won't start. what should i do? thx in advance.
thariks said:
i followed your instructions. unfortunately, i installed Cwod recovery. the official ROM won't start. what should i do? thx in advance.
Click to expand...
Click to collapse
Try following the the steps again from the start...i.e full reset.
thanks for your awsm guide!!!! who hoo iam lovin this cell phone.....;D
Hey. Just wanted to mention one thing. You don't need to format your SD Card to get it to work. All you need is to put the DLOAD folder with the UPDATE.APP in it. You can have other data on the sd card as well and it still works. People end up formatting their sd cards when most of them are already fat32, at least the main partition, so maybe you should edit that step?
wachw said:
Hey. Just wanted to mention one thing. You don't need to format your SD Card to get it to work. All you need is to put the DLOAD folder with the UPDATE.APP in it. You can have other data on the sd card as well and it still works. People end up formatting their sd cards when most of them are already fat32, at least the main partition, so maybe you should edit that step?
Click to expand...
Click to collapse
You are right to some point....but i think it works only if fat32. Some people might have fat or ntfs(windows based) however ill amend the steps thanks man!
veer1238 said:
You are right to some point....but i think it works only if fat32. Some people might have fat or ntfs(windows based) however ill amend the steps thanks man!
Click to expand...
Click to collapse
Yeah I see your point, maybe you could amend it to 'make sure your sd card is formatted to fat32' or something like that?
Edit: just seen you've already changed it. My bad.
Hello All
What will be results if we use to reset with other carrier ?
i.e
If we have a carrier "ZONG" in pakistan and use "ufone" rom is there any harm to fone.
i didn't find "zong" carrier rom in the provided link.
Regards
Koi masla nhn hoga!
Iam on zong using ufone!
Success!!!
thanks.
Unable to press thanks button.
Question.
How to unlock "SIM UNLOCK "Ideos U8150 " Zong" to use other operator sims
Regards

[ROOT]Root galaxy c7 tested stable and install xposed framework

سیدجواد میرحسینی
IRANIAN DEVELOPER​
Hi to all galaxy c7 users
DO NOT USE THIS ROOT FILE ON THE C7000ZHU2AQF2 UPDATE
WIFI DIDN'T WORKS
WIFI BUG FIXED
I want to guide how to root galaxy C7000. On MM6.0.1 and install xposed framework
OK LET,S GO...
1:install crom service.apk
2:enable oem unlock from developer option
3:disable frp lock
4:download the file from this link and extract it(Uploaded to Google Drive)
DOWNLOAD
there is 2 file.install the apk file
then open odin and add .tar file to AP or PDA
and boot ur device to download mode
and flash it
INSTALL THIS SUPER SU
reboot ur phone and open super su and click on new user if its didnt work remove super su.apk on your phone then reflash the root file then reinstall the super su.apk
AND THEN YOU ARE ROOTED YOUR GALAXY C7:laugh::laugh::laugh::laugh::good:
WIFI FIXER
for fix wifi bug:
1. download THIS file and extract it to boot.img
2. open flash fire app select flash frimware package
3. select boot.img
4. make sure to enable inject super su and enable ADB with everboot
5. then hit flash
6. ENJOY
7. THANKS TO @AL_IRAQI FOR MAKE THIS BOOT.IMG
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you want to install xposed framework
1: Download the flash fire.apk from google play and install it
2: Download. this xposed framework and save to your phone
Link for xposed
3: open flash fire app and top on + then select Flash ZIP or OTA
then select the xposed framework from your storage and flash it (DO NOT SELECT AUTO-MOUNT)
your phone will reboot
Then u can install xposed installer.apk
ENJOY!
XPOSED UNINSTALLER
NOTE: DO NOT ACTIVE LUCkY PATCHER MODULE IN XPOSED INSTALLER(BOOTLOP WARNING)
DO NOT FORGET PRESS THANKS​
You are awsome man... great mr. javed... love u...:laugh::laugh::laugh::laugh::laugh:
---------- Post added at 08:50 PM ---------- Previous post was at 08:48 PM ----------
installed and tested on latest C7000ZHU2APL2...
awsome awsome awsome
supertausif2003 said:
You are awsome man... great mr. javed... love u...:laugh::laugh::laugh::laugh::laugh:
---------- Post added at 08:50 PM ---------- Previous post was at 08:48 PM ----------
installed and tested on latest C7000ZHU2APL2...
awsome awsome awsome
Click to expand...
Click to collapse
im JAVAD?
Hello Javad
Thanks a million for this tutorial, you are great man
now for the step # 3, disable frp lock
How can this be done exactly as i am not aware about it
Do a factory reset and then frp lock will be unlocked
YOU CAN GOOGLE IT
250 Views and just 3 thanks???
It is ridiculous im stop developing for this devise...
javad0644 said:
Do a factory reset and then frp lock will be unlocked
YOU CAN GOOGLE IT
Click to expand...
Click to collapse
I have googled it and didn't find anything solid
Then why dude you are saying if you don't know then tell me
While you will write in CAPS GOOGLE IT
It is not respect dude
You are offering help then blaming me for asking!!!
shouk_1987 said:
I have googled it and didn't find anything solid
Then why dude you are saying if you don't know then tell me
While you will write in CAPS GOOGLE IT
It is not respect dude
You are offering help then blaming me for asking!!!
Click to expand...
Click to collapse
with a factory reset frp lock will be unlocked
shouk_1987 said:
I have googled it and didn't find anything solid
Then why dude you are saying if you don't know then tell me
While you will write in CAPS GOOGLE IT
It is not respect dude
You are offering help then blaming me for asking!!!
Click to expand...
Click to collapse
i say google it for more information
javad0644 said:
i say google it for more information
Click to expand...
Click to collapse
No worries mate
Thanks
javad0644 said:
250 Views and just 3 thanks???
It is ridiculous im stop developing for this devise...
Click to expand...
Click to collapse
Hi @javad0644,
Thank you very much for this tutorial and the files you have provided. Lots of Samsung Galaxy C7 (SM-C7000) owners were waiting something like this on XDA for a while. Your thread is new, so more C7 owners will press "THANKS" button when they see/recognize your this thread, so please be patient and kindly continue development on this device. After finding a rooting method for this device, now we need a TWRP Recovery for C7. If you have enough knowledge about this subject and if you could prepare a TWRP Recovery for this device then we would appreciate your work much more. And when you prepare a TWRP Recovery, we could test it..
Thanks for your work and effort..
For which version of these files are supported to root? 5.1.1 or 6.0.1
its for 6.0.1
javad0644 said:
هرگونه کپی برداری بدون ذکر نام و بدون اجازه شرعا حرام می باشد​
Hi to all galaxy c7 users
I want to guide how to root galaxy C7000. On MM6.0.1 and install xposed framework
Its Tested On Any HongKong firmware And I Need Tester for chinese firmware if you can test plz tell me on telegram:
http://Telegram.me/Sjvdm
OK LET,S GO...
1:install crom service.apk( if you haven,t tell me)
2:enable oem unlock from developer option
3:disable frp lock( if you don,t know tell me)
4:download the file from this link and extract it(Uploaded to Google Drive)
https://drive.google.com/file/d/0B18M9PyCQiEzR2twYllsT1ZyTVU/view?usp=drivesdk
there is 2 file.install the apk file
then open odin and add .tar file to AP or PDA
and boot ur device to download mode
and flash it
reboot ur phone and open super su and click on new user if its didnt work remove super su.apk on your phone then reflash the root file then reinstall the super su.apk
AND THEN YOU ARE ROOTED YOUR GALAXY C7:laugh::laugh::laugh::laugh::good:
If you want to install xposed framework
1: Download the flash fire.apk from google play and install it
2: Download. this xposed framework and save to your phone
Link for xposed:https://www.androidfilehost.com/?fid=529152257862685343
3: open flash fire app and top on + then select Flash ZIP or OTA
then select the xposed framework from your storage and flash it (DO NOT SELECT AUTO-MOUNT)
your phone will reboot
Then u can install xposed installer.apk
ENJOY!
xposed-uninstaller
https://www.androidfilehost.com/?fid=24499762635998273
NOTE: DO NOT ACTIVE LUCkY PATCHER MODULE IN XPOSED INSTALLER(BOOTLOP WARNING)
DO NOT FORGET PRESS THANKS​
Click to expand...
Click to collapse
Something of a slow thread this - i wonder if its because this isnt a popular device or what.
Waiting for my C7 right now, i hope your root method wont brick my device
---------- Post added at 11:39 AM ---------- Previous post was at 11:37 AM ----------
lawyer_06 said:
Hi @javad0644,
Thank you very much for this tutorial and the files you have provided. Lots of Samsung Galaxy C7 (SM-C7000) owners were waiting something like this on XDA for a while. Your thread is new, so more C7 owners will press "THANKS" button when they see/recognize your this thread, so please be patient and kindly continue development on this device. After finding a rooting method for this device, now we need a TWRP Recovery for C7. If you have enough knowledge about this subject and if you could prepare a TWRP Recovery for this device then we would appreciate your work much more. And when you prepare a TWRP Recovery, we could test it..
Thanks for your work and effort..
Click to expand...
Click to collapse
Is it working? Have you tested it? Sorry to ask, but noones actually stated that yet apart from the dev - congratulations are one thing, reviews another
Thanks in advance!
Works! I just updated to C7000ZZH2AQC2, then flashed the included tarball.
Had to update supersu app and then reflash the tar file - after reboot SuperSu updated the binary and all was fine.
My device had HK firmware installed to begin with.
vshapke said:
Is it working? Have you tested it? Sorry to ask, but noones actually stated that yet apart from the dev - congratulations are one thing, reviews another
Thanks in advance!
Click to expand...
Click to collapse
As you stated in your secondary post, the rooting method in this thread is working for Samsung Galaxy C7 (SM-C7000).. But, in the OP, there are just root files, there isn't any TWRP Recovery for C7. So, now we need a TWRP Recovery for C7..
javad0644 said:
Its Tested On Any HongKong firmware And I Need Tester for chinese firmware if you can test plz tell me on telegram:
http://Telegram.me/Sjvdm​
Click to expand...
Click to collapse
I have tested Chinese Firmware and upon bootup it showed a bold, yellow triangle warning saying (roughly translated):
"Non-Samsung Official System The operating system B on your device is modified and may be unsafe. And will lead to increased battery consumption, short standby time. Call 400-810-5858 to contact customer service."
I suggest that if you try this on Chinese Firmware and it doesn't work, go back and install stock firmware using Odin (Only CHC Region will work on chinese firmware).
Thanx a lot @javad0644 I successfully rooted my c7 with your method. Btw the firmware is C7000ZHU2AQF2
Thank-you so much
Hey, what is the current situation on your TWRP work?

[TOOLS] The Unbrick Thread for LeEco Le 2 (x52x) QDloader 9008 Mode Links FIXED

Antecipating issues in this matter, and mostly because of my experience on a Gionee phone, being about a month with the phone turned to a brick...
Looking for answers and help some times takes to long, and most of us desesperate...
So i thought to gather all in this matter in just one thread, all centrelized, and easy to access if any of us gets bricked...
UNBRICK LeEco Le 2
To use with this method: Youtube || Forum LE (Forum OffLine)
Files:
Drivers
General QDLoader x86/x64 - DOWNLOAD
2017 Version for Win10 - DOWNLOAD
Flash Tools
FlashOne 1.9 - DOWNLOAD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FlashOne 2.0 - DOWNLOAD
QFIL - DOWNLOAD
Flash Sparse ROMs
x520 - DOWNLOAD
x526 - DOWNLOAD
x527 - Unavailable Please share if you found it....
Qualcomm IMEI Fixing Tool - DOWNLOAD
17March2021 Update
The links for the ROMs and the IMEI Fixing tool were fixed.
All links tested OK
Please, if you think that is something missing here, please dont be shy... share it...
I would like to share with u all the International Version ROM x527 and also the American Version x522, but haven't found them yet....
error
Please don't contain blank space in tool path when i try to flash this error shows fed up trying everything nothing works any solution please help and if you now how to flash common fasstboot method please tell
GauravGandhi said:
Please don't contain blank space in tool path when i try to flash this error shows fed up trying everything nothing works any solution please help and if you now how to flash common fasstboot method please tell
Click to expand...
Click to collapse
Please, make sure that the Flash Type is : " Qualcomm - flash dead phone".
If it is, use 2.0 version.
If you get the same error, extract the rom file to a folder and use QFIL (just uploaded)
RSGI
Is there an video of qfil or else steps to flash it through qfil and i have tried it with both flashone same eror ...
Anyone help me please,
After unzipping it is showing mainfeast.xml file is missing
skishoreraju said:
Anyone help me please,
After unzipping it is showing mainfeast.xml file is missing
Click to expand...
Click to collapse
do not unzip, select the zip file
RSGI said:
do not unzip, select the zip file
Click to expand...
Click to collapse
i did not unzipped it, flashone tool will unzip the files after that i an getting the error message.
Now i have new error , please help mee
I had similar problems with x520 (snap 652). No Baseband and No Imei.
I will tell you what I did for solve it
EDIT: I've found that the first part is not necessary.
1. Activate developer options and enable this options: OEM unlocking and USB debuging. Power off the phone
2. Put phone into Fastboot mode. Vol - + Power
3. Use adb to unlock bootloader and install TWRP as recovery
4 Download this rom to flash by TWRP: https://devs-lab.com/download-letv-official-stock-rom.html * The one for x520 (Qualcomm)
5. In TWRP select Wipe and do a dirty or clean (as you want) wipe before flash the rom, once it's done go back to menu, copy the ROM (zip) into the internal memory of the phone and flash it!
6. Reboot and wait till phone boots
7. Baseband and IMEI's back working!
My problems were solved doing this.... still don't know why... but worked
Hope will help anyone with similar problems
PD: Sorry for my english, isn't my mother language.
Greetings
Is it possible to use either x520 or x526 files to recover x522 device?
skishoreraju said:
i did not unzipped it, flashone tool will unzip the files after that i an getting the error message.
Now i have new error , please help mee
Click to expand...
Click to collapse
Did you get it resolved?
nadeem_naddy said:
Did you get it resolved?
Click to expand...
Click to collapse
Not yet, searching for another methods
skishoreraju said:
Not yet, searching for another methods
Click to expand...
Click to collapse
You need to download correct rom and here it is -
https://mega.nz/#!tUQG2SCA!CPCYrZdNl0Sj1y0GNnxvLb5iISeHyffyf_WtwjdgS8A
Thanks great to see the X520 sparse here too , just one problem, after following qualcomm guide to format and erase all partitions, something has gone wrong but I don't know how to fix it !
IMEI and baseband are showing fine but in the settings / about phone / ststus sim card is showing radio off, it still reads the network and my phone number from the card and any other card I have tried but I cn't switch on the radio even in *#*#4636#*#* menu !
Has someone come across this ? How to fix it ?
Sir, I am not able to restore my IMEI and wifi. Can you please help ? Thank you
any updates
Can i use this method to bring back my phone to stock from custom recovery and rom
priyabrata12345 said:
Sir, I am not able to restore my IMEI and wifi. Can you please help ? Thank you
Click to expand...
Click to collapse
Check my post here https://forum.xda-developers.com/le-2/help/qcn-file-leeco-le2-x526-indian-version-t3692033
It MAY help
Hi sir! Can I use this to bypass Leeco account as well? My Le 2 x520 is stucked at start up guide (Leeco Account verification) as I lost the password and other means to retrieve it. Thank you!
lloyd.lemoncito said:
Hi sir! Can I use this to bypass Leeco account as well? My Le 2 x520 is stucked at start up guide (Leeco Account verification) as I lost the password and other means to retrieve it. Thank you!
Yes, use X526 Indian version there you skipped leeco account.
Click to expand...
Click to collapse
AVrawat said:
lloyd.lemoncito said:
Hi sir! Can I use this to bypass Leeco account as well? My Le 2 x520 is stucked at start up guide (Leeco Account verification) as I lost the password and other means to retrieve it. Thank you!
Yes, use X526 Indian version there you skipped leeco account.
Click to expand...
Click to collapse
Thank you sir. Any pointers on what tools I can use? I am unable to use twrp and adb
Click to expand...
Click to collapse

[STF-L09C432] How to install Oreo on your H9

So when it comes to the newly released EMUI8 for Honor 9 things get a little bit tricky, as we don't have any official update for our region yet (only for C900 and AL variants - chinese).
Every file i provided have been built during the way finding how stuff works on oreo - and alot of stuff changed EDIT: Official update is out for C432 - i recommend to not use the provided TWRP for daily, reliable usage.
PART 1
0. download the B360a zip from my mega folder
1. read README.txt from fw zip and follow the steps carefully (easy install)
2. have fun with official oreo
Rollback instructions
1. copy the rollback zip and nocheck recovery (!!oreo version!!) to the root of your MicroSD card
2. enable usb debugging in developer options
3. connect your phone to your computer, start an adb shell and issue the following commands:
Code:
dd if=/storage/sdcard1/STF_RECOVERY_OREO_NoCheck.img of=/dev/block/bootdevice/by-name/recovery_ramdisk
dd if=/storage/sdcard1/STF_RECOVERY_OREO_NoCheck.img of=/dev/block/bootdevice/by-name/erecovery_ramdisk
echo --update_package=/sdcard/update_rollback_al10c00b190.zip > /cache/recovery/command
4. last but not least reboot recovery, again in adb shell:
Code:
reboot recovery
5. your device should start to flash a chinese version of nougat (EMUI 5.1)
hint: if you get an error during the installation, just press the reboot button, it still boots.
device crashes during boot? do a low-level data partition format, boot into erecovery when you get asked to.
6. prepare the MicroSD (8gb atleast, exFAT formatted)
download the C432 firmware and extract it
copy the dload folder you extracted to the root of your MicroSD
7. if required unlock your bootloader
8. flash the nocheck recovery (nougat version) to recovery and recovery2 partition using fastboot
Code:
fastboot flash recovery STF_RECOVERY_NoCheck.img
fastboot flash recovery2 STF_RECOVERY_NoCheck.img
9. boot your device into force dload mode (keep vol+, vol- and power pressed until the installation starts)
10. you should boot into a fresh L09C432B100 installation
I've uploaded every file you need for the process to mega.nz - please do not mirror any of the stuff provided!
[url]https://mega.nz/#F!W1QUAIbZ!7Gbf79dC6NwD1e_zdY_O3Q[/URL]
Huge thanks to @LastStandingDroid for providing the modified SuperSU installation package.
Best Regards,
OldDroid
To fix the file manager, open your root file explorer and follow the steps carefully:
1. create a folder called "normal" in /cust/hw
2. create a second folder in the previously created one, name it "app"
3. now move HwCloudDrive_Local folder from /cust/hw/eu/app to /cust/hw/normal/app
4. reboot
Thank you!
I'll try it!
Does bootloader uncloked ?
After I done the factory reset my themes lost again, and the boot animation too...and the apps....
I mean, I done everithing what you said and the themes come back...but after i relocked the bootloader its gone....like if i didn't do anithing :S (sorry for my bad English)
Should i try again?
BobekMark said:
After I done the factory reset my themes lost again, and the boot animation too...and the apps....
I mean, I done everithing what you said and the themes come back...but after i relocked the bootloader its gone....like if i didn't do anithing :S (sorry for my bad English)
Should i try again?
Click to expand...
Click to collapse
don't relock the bootloader after the whole process
OldDroid said:
don't relock the bootloader after the whole process
Click to expand...
Click to collapse
Ohh.... i see...ty
i will try it again
---------- Post added at 06:14 PM ---------- Previous post was at 05:19 PM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my result. :\
It's okay, or there should be some other apps? Or should it be C432 instead of C900 ? :S
(There is no Huawei Account option :S )
BobekMark said:
Ohh.... i see...ty
i will try it again
---------- Post added at 06:14 PM ---------- Previous post was at 05:19 PM ----------
This is my result. :\
It's okay, or there should be some other apps?
(There is no Huawei Account option :S )
Click to expand...
Click to collapse
which h9 version do you have, C432?
OldDroid said:
which h9 version do you have, C432?
Click to expand...
Click to collapse
Yes (I updated the pictures)
BobekMark said:
Yes (I updated the pictures)
Click to expand...
Click to collapse
thats normal, your phone is still running c432, this is just a ui thing, if it disturbs you i can post the path where the version is beeing set
OldDroid said:
thats normal, your phone is still running c432, this is just a ui thing, if it disturbs you i can post the path where the version is beeing set
Click to expand...
Click to collapse
And the apps are ok?
When i was in the root explorer i still see applications like File Manager and Huawei apps :S
BobekMark said:
And the apps are ok?
When i was in the root explorer i still see applications like File Manager and Huawei apps :S
Click to expand...
Click to collapse
where did you find them?
I have problem with installation.
I have NTFS system files on my SD card and i can't mount this card in TWRP.
What i have to do?
Format to FAT32 or what?
So awesome, thank you for that.
Is there a version of this that will work the same or similar on the P10 (standard P10). Thanks
OldDroid said:
where did you find them?
Click to expand...
Click to collapse
There
BobekMark said:
There
Click to expand...
Click to collapse
Install em as normal apk it'll be visible.
I don't like your settings it looks so color less
[emoji6]
Sent from my DUK-L09 using Tapatalk
LastStandingDroid said:
Install em as normal apk it'll be visible.
I don't like your settings it looks so color less
[emoji6]View attachment 4337715View attachment 4337718View attachment 4337719
Sent from my DUK-L09 using Tapatalk
Click to expand...
Click to collapse
Ok...but i don't have Huawei "Support" or account or idk what.....but for example...the themes app is different, because i can't log in any Huawei Account ...it's not an option to log in :\
Hi! And first of all, thanks a lot for this guide as you just gave hopeless H9 owners a bit of light...
Now I haven't gone through the process yet but I got a bit confused as of part.3 (that is recommended but not needed), should we unroot BEFORE flashing Ramdisk and Recovery Ramdisk? I then have an old UnSu script by Osmosis, would it work or the "Full Unroot" option from the SuperSu app is okay?
Thanks in advance for your reply and Thanks again for this guide!! Cheers
BobekMark said:
Ok...but i don't have Huawei "Support" or account or idk what.....but for example...the themes app is different, because i can't log in any Huawei Account ...it's not an option to log in :\
Click to expand...
Click to collapse
Install huawei services from play store but it won't help ;P
Because online themes is disabled by default
Sent from my DUK-L09 using Tapatalk

[Q] How to root China Mobile A3s (CMCC A3s M653)

Hi,
I'm trying to root the China Mobile A3s, but so far unsuccessfully.
Code:
Device Name: A3s
Model: M653
Android version: 7.1.1
Chipset : Qualcomm MSM88917 Snapdragon 425
Kernel version: 3.18.31
Software version: M653_01.33.00RDP_CN.00
BoardID: wt86617AA1
LCD: ili9881c_HD720p_video_TXD
TP:YeJi,Himax852xes,FW:0x3
Alsps:EPL259x
What I was able to do:
-Enable developer options
-Enable OEM unlocking
-Enable USB debugging
-Boot phone into USB diagnostic mode (I think) by pressing vol+ and vol- on boot (device detected as "Qualcomm HS-USB QDLoader 9008")
-Enter service menu by holding vol+ on boot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Image transcription:
[PCBA Test]
[MMI Test][Audio Test]
[Sensor Test]
[Erase Misc][Hardware Info]
[fastboot][recovery]
[download][English (language change)]
[Power Off][Root check]
Click to expand...
Click to collapse
After pressing [Root check] and waiting for a few minutes the following message appears:
System root check result: FAIL
Click to expand...
Click to collapse
Framaroot and Dirtcow checker both fails and there is no TWRP image for this phone (yet?).
Any idea how to root this phone?
The phone probably has a locked bootloader.
All commands executed by fastboot return failed. In the programming options, the OEM lock is switched on.
I was able to download part of the partition in the emmcdl program in download mode. I was unable to download the system partition, the program crashes.
Based on the original recovery, I prepared TWRP from the Redmi 5A phone. Unfortunately, I can not upload it to see if it works correctly.
I attach everything I managed to rip from my phone and my TWRP. Maybe someone will achieve something more.
http://www84.zippyshare.com/v/qrSNOW7t/file.html - emmcdl + part of ripped partitions + maybe working TWRP
http://www84.zippyshare.com/v/GfYaZHZ9/file.html - unpacked factory recovery
realtimes said:
Hi,
I'm trying to root the China Mobile A3s, but so far unsuccessfully.
Code:
Device Name: A3s
Model: M653
Android version: 7.1.1
Chipset : Qualcomm MSM88917 Snapdragon 425
Kernel version: 3.18.31
Software version: M653_01.33.00RDP_CN.00
BoardID: wt86617AA1
LCD: ili9881c_HD720p_video_TXD
TP:YeJi,Himax852xes,FW:0x3
Alsps:EPL259x
What I was able to do:
-Enable developer options
-Enable OEM unlocking
-Enable USB debugging
-Boot phone into USB diagnostic mode (I think) by pressing vol+ and vol- on boot (device detected as "Qualcomm HS-USB QDLoader 9008")
-Enter service menu by holding vol+ on boot:
Image transcription:
After pressing [Root check] and waiting for a few minutes the following message appears:
Framaroot and Dirtcow checker both fails and there is no TWRP image for this phone (yet?).
Any idea how to root this phone?
Click to expand...
Click to collapse
Do you have telegram? Come to telegram. Maybe we can will root.
---------- Post added at 19:50 ---------- Previous post was at 19:48 ----------
@[email protected] said:
The phone probably has a locked bootloader.
All commands executed by fastboot return failed. In the programming options, the OEM lock is switched on.
I was able to download part of the partition in the emmcdl program in download mode. I was unable to download the system partition, the program crashes.
Based on the original recovery, I prepared TWRP from the Redmi 5A phone. Unfortunately, I can not upload it to see if it works correctly.
I attach everything I managed to rip from my phone and my TWRP. Maybe someone will achieve something more.
http://www84.zippyshare.com/v/qrSNOW7t/file.html - emmcdl + part of ripped partitions + maybe working TWRP
http://www84.zippyshare.com/v/GfYaZHZ9/file.html - unpacked factory recovery
Click to expand...
Click to collapse
Do you have this phone? Come to telegram . Let's try fix.
Dev4Perf said:
Do you have this phone? Come to telegram . Let's try fix.
Click to expand...
Click to collapse
I have this phone. I do not use Telegram, I use WhatsApp, but I can install it for a while if necessary.
Only my English is weak.
Dev4Perf said:
Do you have telegram? Come to telegram. Maybe we can will root.
---------- Post added at 19:50 ---------- Previous post was at 19:48 ----------
Do you have this phone? Come to telegram . Let's try fix.
Click to expand...
Click to collapse
I have this phone. Invite me to Telegram group +79172806866.
@[email protected] said:
The phone probably has a locked bootloader.
All commands executed by fastboot return failed. In the programming options, the OEM lock is switched on.
I was able to download part of the partition in the emmcdl program in download mode. I was unable to download the system partition, the program crashes.
Based on the original recovery, I prepared TWRP from the Redmi 5A phone. Unfortunately, I can not upload it to see if it works correctly.
I attach everything I managed to rip from my phone and my TWRP. Maybe someone will achieve something more.
http://www84.zippyshare.com/v/qrSNOW7t/file.html - emmcdl + part of ripped partitions + maybe working TWRP
http://www84.zippyshare.com/v/GfYaZHZ9/file.html - unpacked factory recovery
Click to expand...
Click to collapse
Kaappa said:
I have this phone. Invite me to Telegram group +79172806866.
Click to expand...
Click to collapse
Message sended
---------- Post added at 20:39 ---------- Previous post was at 20:37 ----------
@[email protected] said:
I have this phone. I do not use Telegram, I use WhatsApp, but I can install it for a while if necessary.
Only my English is weak.
Click to expand...
Click to collapse
We using only telegram
Dev4Perf said:
We using only telegram
Click to expand...
Click to collapse
Ok, I installed Telegram on my "working" number: +48667827931
Mission completed! I successfully rooted the phone!
Great news! I am waiting for a description.
Great notice !
Hi, great notice, please send your informations how to root and twrp in phone.
---------- Post added at 10:56 PM ---------- Previous post was at 10:55 PM ----------
Dev4Perf said:
Mission completed! I successfully rooted the phone!
Click to expand...
Click to collapse
Hi, great notice, please send your informations how to root and twrp in phone.
Dev4Perf said:
Mission completed! I successfully rooted the phone!
Click to expand...
Click to collapse
Great news!
Please share a how-to :good:
I just ordered this phone for $59 on Banggood, I hope we'll get some custom ROMs for it!
4PDA.ru has lots of discussion about this. Haven't had time to translate&read what they're talking about.
https://4pda.ru/forum/index.php?showtopic=890712
Also, what's your Telegram group? I couldn't find it...
Dev4Perf said:
Mission completed! I successfully rooted the phone!
Click to expand...
Click to collapse
Hello how do you root the phone?
Cause I want to remove the adware that is (Messaging and Contacts app):crying:
Good news guys @zelendel may support this phone.
I'm thinking of getting one for a secondary phone as my Oukitel C5 is dying.
If we've managed to get rid of the bloated Rom and get AOSP 8.1 that would be so awesome ?
Great news. I think it could be one of the best cheap phones if there was some developer who would make a clean Android system (AOSP or LineageOS) for him.
I can not root and replace twrp recovery,
please help how to root china mobile a3s m653
thanks..
I found something like that, I have not tested yet: https://4pda.ru/forum/index.php?showtopic=895813&st=40#entry72219785
Im wating this phone from banggod. I hope great news of succes root
It works!
I uploaded TWRP version 2 as described on 4PDA. Then I installed the SuperSu zip.
I also managed to enable Camera2Api. Now I will try to upload clean software 01.40, without modifying Chinese sellers.
@[email protected] said:
It works!
I uploaded TWRP version 2 as described on 4PDA. Then I installed the SuperSu zip.
I also managed to enable Camera2Api. Now I will try to upload clean software 01.40, without modifying Chinese sellers.
Click to expand...
Click to collapse
can not download files on 4pda site 404 not found.
please upload here or other sites.and how to documents and pictures thanks.
:fingers-crossed:
isomik said:
can not download files on 4pda site 404 not found.
please upload here or other sites.and how to documents and pictures thanks.
:fingers-crossed:
Click to expand...
Click to collapse
you just need to logon on 4pda

Categories

Resources