So when it comes to the newly released EMUI8 for Honor 9 things get a little bit tricky, as we don't have any official update for our region yet (only for C900 and AL variants - chinese).
Every file i provided have been built during the way finding how stuff works on oreo - and alot of stuff changed EDIT: Official update is out for C432 - i recommend to not use the provided TWRP for daily, reliable usage.
PART 1
0. download the B360a zip from my mega folder
1. read README.txt from fw zip and follow the steps carefully (easy install)
2. have fun with official oreo
Rollback instructions
1. copy the rollback zip and nocheck recovery (!!oreo version!!) to the root of your MicroSD card
2. enable usb debugging in developer options
3. connect your phone to your computer, start an adb shell and issue the following commands:
Code:
dd if=/storage/sdcard1/STF_RECOVERY_OREO_NoCheck.img of=/dev/block/bootdevice/by-name/recovery_ramdisk
dd if=/storage/sdcard1/STF_RECOVERY_OREO_NoCheck.img of=/dev/block/bootdevice/by-name/erecovery_ramdisk
echo --update_package=/sdcard/update_rollback_al10c00b190.zip > /cache/recovery/command
4. last but not least reboot recovery, again in adb shell:
Code:
reboot recovery
5. your device should start to flash a chinese version of nougat (EMUI 5.1)
hint: if you get an error during the installation, just press the reboot button, it still boots.
device crashes during boot? do a low-level data partition format, boot into erecovery when you get asked to.
6. prepare the MicroSD (8gb atleast, exFAT formatted)
download the C432 firmware and extract it
copy the dload folder you extracted to the root of your MicroSD
7. if required unlock your bootloader
8. flash the nocheck recovery (nougat version) to recovery and recovery2 partition using fastboot
Code:
fastboot flash recovery STF_RECOVERY_NoCheck.img
fastboot flash recovery2 STF_RECOVERY_NoCheck.img
9. boot your device into force dload mode (keep vol+, vol- and power pressed until the installation starts)
10. you should boot into a fresh L09C432B100 installation
I've uploaded every file you need for the process to mega.nz - please do not mirror any of the stuff provided!
[url]https://mega.nz/#F!W1QUAIbZ!7Gbf79dC6NwD1e_zdY_O3Q[/URL]
Huge thanks to @LastStandingDroid for providing the modified SuperSU installation package.
Best Regards,
OldDroid
To fix the file manager, open your root file explorer and follow the steps carefully:
1. create a folder called "normal" in /cust/hw
2. create a second folder in the previously created one, name it "app"
3. now move HwCloudDrive_Local folder from /cust/hw/eu/app to /cust/hw/normal/app
4. reboot
Thank you!
I'll try it!
Does bootloader uncloked ?
After I done the factory reset my themes lost again, and the boot animation too...and the apps....
I mean, I done everithing what you said and the themes come back...but after i relocked the bootloader its gone....like if i didn't do anithing :S (sorry for my bad English)
Should i try again?
BobekMark said:
After I done the factory reset my themes lost again, and the boot animation too...and the apps....
I mean, I done everithing what you said and the themes come back...but after i relocked the bootloader its gone....like if i didn't do anithing :S (sorry for my bad English)
Should i try again?
Click to expand...
Click to collapse
don't relock the bootloader after the whole process
OldDroid said:
don't relock the bootloader after the whole process
Click to expand...
Click to collapse
Ohh.... i see...ty
i will try it again
---------- Post added at 06:14 PM ---------- Previous post was at 05:19 PM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my result. :\
It's okay, or there should be some other apps? Or should it be C432 instead of C900 ? :S
(There is no Huawei Account option :S )
BobekMark said:
Ohh.... i see...ty
i will try it again
---------- Post added at 06:14 PM ---------- Previous post was at 05:19 PM ----------
This is my result. :\
It's okay, or there should be some other apps?
(There is no Huawei Account option :S )
Click to expand...
Click to collapse
which h9 version do you have, C432?
OldDroid said:
which h9 version do you have, C432?
Click to expand...
Click to collapse
Yes (I updated the pictures)
BobekMark said:
Yes (I updated the pictures)
Click to expand...
Click to collapse
thats normal, your phone is still running c432, this is just a ui thing, if it disturbs you i can post the path where the version is beeing set
OldDroid said:
thats normal, your phone is still running c432, this is just a ui thing, if it disturbs you i can post the path where the version is beeing set
Click to expand...
Click to collapse
And the apps are ok?
When i was in the root explorer i still see applications like File Manager and Huawei apps :S
BobekMark said:
And the apps are ok?
When i was in the root explorer i still see applications like File Manager and Huawei apps :S
Click to expand...
Click to collapse
where did you find them?
I have problem with installation.
I have NTFS system files on my SD card and i can't mount this card in TWRP.
What i have to do?
Format to FAT32 or what?
So awesome, thank you for that.
Is there a version of this that will work the same or similar on the P10 (standard P10). Thanks
OldDroid said:
where did you find them?
Click to expand...
Click to collapse
There
BobekMark said:
There
Click to expand...
Click to collapse
Install em as normal apk it'll be visible.
I don't like your settings it looks so color less
[emoji6]
Sent from my DUK-L09 using Tapatalk
LastStandingDroid said:
Install em as normal apk it'll be visible.
I don't like your settings it looks so color less
[emoji6]View attachment 4337715View attachment 4337718View attachment 4337719
Sent from my DUK-L09 using Tapatalk
Click to expand...
Click to collapse
Ok...but i don't have Huawei "Support" or account or idk what.....but for example...the themes app is different, because i can't log in any Huawei Account ...it's not an option to log in :\
Hi! And first of all, thanks a lot for this guide as you just gave hopeless H9 owners a bit of light...
Now I haven't gone through the process yet but I got a bit confused as of part.3 (that is recommended but not needed), should we unroot BEFORE flashing Ramdisk and Recovery Ramdisk? I then have an old UnSu script by Osmosis, would it work or the "Full Unroot" option from the SuperSu app is okay?
Thanks in advance for your reply and Thanks again for this guide!! Cheers
BobekMark said:
Ok...but i don't have Huawei "Support" or account or idk what.....but for example...the themes app is different, because i can't log in any Huawei Account ...it's not an option to log in :\
Click to expand...
Click to collapse
Install huawei services from play store but it won't help ;P
Because online themes is disabled by default
Sent from my DUK-L09 using Tapatalk
Related
1- You must be at b023
2- Download update zip http://pan.baidu.com/s/1sj23EZN#path=%2F%E5%8D%8E%E4%B8%BAP8max
(just get inside folder at hwouc.rar and press on download sign and then press on the white pop-up it ll download normally or by by internet download manager)
3-Copy the zip (dont extract) to a new folder with name "dload" to an root of external sd card
4-Go to setting/updater and select local update
5-Now you are in and give a another restart again after wipe cache for zero errors
Dont forget to give a thanks before run
Who has tried this so far? I presume this one is just B025 with some hotfixes? Any issues in the update process or on the firmware? Changelog?
NZtechfreak said:
Who has tried this so far? I presume this one is just B025 with some hotfixes? Any issues in the update process or on the firmware? Changelog?
Click to expand...
Click to collapse
Updated. This is an OTA from B023 to B026 and not a full rom.
Alternative mirror from my google drive : https://drive.google.com/file/d/0B_yP2fUmqL6KNUtRWFBnblM2Nm8/view?usp=sharing
hi,
why don't i receive this OTA yet ?
---------- Post added at 10:49 AM ---------- Previous post was at 10:46 AM ----------
sehooo said:
1- You must be at b023
2- Download update zip http://pan.baidu.com/s/1sj23EZN#path=%2F%E5%8D%8E%E4%B8%BAP8max
3-Copy the zip (dont extract) to a new folder with name "dload" to an root of external sd card
4-Go to setting/updater and select local update
5-Now you are in and give a another restart again after wipe cache for zero errors
Dont forget to give a thanks before run
Click to expand...
Click to collapse
Hi,
1/ How do you do to wipe cache please ?
2/ What's the interest to do that ?
Thank you in advance for answering.
lvpl said:
hi,
why don't i receive this OTA yet ?
---------- Post added at 10:49 AM ---------- Previous post was at 10:46 AM ----------
Hi,
1/ How do you do to wipe cache please ?
2/ What's the interest to do that ?
Thank you in advance for answering.
Click to expand...
Click to collapse
You didn't get this OTA because it has not pushed yet, a few testers have it and it seems one of them had kindly uploaded for us to manually install.
Wiping cache sometimes helps prevent issues after flashing a new firmware. You need to hold down power up while restarting the phone to access the menu that allows this.
+whatsapp problem is fixed
Thanks for sharing
Where do i find the Double tap to wake-up Setting?
Hirs_E_Fruit said:
Where do i find the Double tap to wake-up Setting?
Click to expand...
Click to collapse
Motion control
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HUAWEI P8max using Tapatalk
Thank you for this, been looking forward to it!
sehooo said:
1- You must be at b023
2- Download update zip http://pan.baidu.com/s/1sj23EZN#path=%2F%E5%8D%8E%E4%B8%BAP8max
3-Copy the zip (dont extract) to a new folder with name "dload" to an root of external sd card
4-Go to setting/updater and select local update
5-Now you are in and give a another restart again after wipe cache for zero errors
Dont forget to give a thanks before run
Click to expand...
Click to collapse
thanks man
Thanks mate, updated and my battery seems to have improved (or maybe am imagining it). Generally I use to lose 35-40% by lunch but today I have lost only 15% and it is almost lunch..
Can anyone help me please
I don't have the double-tap option even though i'm on B026 update !!!
i wiped cache and installed the update three times. :crying:
Any solution for facebook notification problem at status bar?
Sent from my HUAWEI P8max using XDA Free mobile app
lzm said:
Can anyone help me please
I don't have the double-tap option even though i'm on B026 update !!!
i wiped cache and installed the update three times. :crying:
Click to expand...
Click to collapse
You bought the phone from ksa or china directly?
Sent from my HUAWEI P8max using XDA Free mobile app
sehooo said:
You bought the phone from ksa or china directly?
Sent from my HUAWEI P8max using XDA Free mobile app
Click to expand...
Click to collapse
from Ksa but it's a Chinese version
lzm said:
from Ksa but it's a Chinese version
Click to expand...
Click to collapse
from extra store?
I love this update. It make my p8max very smooth and very fast and battery better
Double click is fantastic
I have P8 Max ... DAV-701LV100R001C199B002
I downloaded the "update.zip" file from the Google Drive link.
It was an 88.4 MB file.
I tried to update via local update as you mentioned above.
The phone restarted and the update process started.
At 3% or so it failed with a message that the update is incomplete.
The phone restarted and I am still on B002.
Is there a way to update my phone to B023 first so that I can update it to B026 then???
fatehh said:
I have P8 Max ... DAV-701LV100R001C199B002
I downloaded the "update.zip" file from the Google Drive link.
It was an 88.4 MB file.
I tried to update via local update as you mentioned above.
The phone restarted and the update process started.
At 3% or so it failed with a message that the update is incomplete.
The phone restarted and I am still on B002.
Click to expand...
Click to collapse
Did you read the instructions in the first post? You need to be on B023 to use the update.
Aj's Galaxy C5 (SM-C5000) ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Based on the latest C5000ZHU1API2firmware (January 2017 Security Patch)
Deodexed
Extremely Debloated
100% De-Knox
Zip-aligned
Rooted with SuperSU v2.79 SR3 Systemless
Added Busybox v1.24
Added latest Sqlite (useful for titantium backup)
Full PlayStore support
Removed all Chinese crap
Added lNIT.D Support
Added SU.D Support
ROM ===>[C5000] Aj's Galaxy C5 ROM v1.0.zip
TWRP ===> C5000_TWRP_ODIN_FILES.zip
Chinese SVoice Addon ===> SVoice_Chinese_Cantonese_Addon.zip
Chinese GoogleTTS Addon ===> GoogleTTS_Addon.zip
FLASH THE LASTEST FIRMWARE FROM SAMMOBILE/UPDATO BEFORE INSTALLING THIS ROM.
MUST FOLLOW INSTRUCTIONS HERE
0. ALWAYS BACKUP(esp EFS)
1. Download the C5 ROM and copy to SD card.
__ Download Samsung SM-C5000 TWRP Files and extract it (EXTRACT ONLY THE TWRP zip once nothing else)
2. Install CROM Service APK (inside the TWRP zip) to unlock crom lock in download mode.(note there is 2 version of the crom.apk if one doesnt work install the other)
3. Disable locks ( disable all FINGERPRINT LOCKs, and OEM lock ). OEM unlock found in developer options, tap build number 7 times to unlock
4. Reboot into download mode. (Make sure CROM Service is unlocked and FRP lock is off.)
5. Using Odin (Inside TWRP zip) Click AP and Select "C5000-TWRP-TEST.tar" from the extracted files
--after flashing the device will reboot itself
6. Turn off device and Reboot into TWRP custom recovery. (by pressing power, home, and volume up button)
7. In TWRP go to WIPE-> select System,Data, Cache, Dalvik ART and wipe them (DO NOT WIPE SD CARD, or internal storage)
8. In TWRP go to INSTALL-> and select the C5 rom and install it
9 . Reboot and wait 7-10 minutes for first boot. (don't panic, only the first boot takes that long, because the ROM is deodexed.)
BUG FREE, LAG FREE, AND PLENTY OF RAM
FOR XPOSED FRAMEWORK GO HERE ==> (PS OUR DEVICE IS ARM) https://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Credits: @ASSAYYED|@Chainfire|@sammobile|XDA Community
TWRP CREDITS: [url]http://bbs.gfan.com/[/URL] and @havork - here
reserved
C5
updated TWRP for our beloved C5
link is here
https://mega.nz/#!CsYyVTha
Decrypt Key is here
!lIguQge6GsGiRFoQexihrYgHHR1SFmavkyUuFpmzL4E
C5
After install found awesome no any bug and lag free but plz required email app which u have DE bloat if possible.
Thank you bro
Thanks Jonathan,
Installed fine, had an issue with "Checking connection screen" on first boot, took forever. Solution was to eject sim card and try again.
But wifi wont connect, can't turn it on. I had this issue with one other ROM.
Any idea?
By the way, thanks for crediting me
havork said:
Thanks Jonathan,
Installed fine, had an issue with "Checking connection screen" on first boot, took forever. Solution was to eject sim card and try again.
But wifi wont connect, can't turn it on. I had this issue with one other ROM.
Any idea?
By the way, thanks for crediting me
Click to expand...
Click to collapse
here is a bug after flash of ur rom i dont have root as some app like Dr.fone and GT recovery said ur device is not rooted but for other apps like titanium backup grant su permission strange problem please help
khalidkls said:
here is a bug...
Click to expand...
Click to collapse
Why quote me? :silly:
havork said:
Why quote me? :silly:
Click to expand...
Click to collapse
Dear Due to dev instruct ur rooting method
jonathanmohamed said:
reserved
Click to expand...
Click to collapse
Dear are you porting UX rom (C9 Pro) for our C5 as i see u have ported some roms for S5 also
I wonder Is this rom support Turkish language and Are there any error(mistakes,bug,lag).Are there any photo(screenshot) for this rom.
Hi everyone, I want to flash this new rom on my C5000 , can anybody tell me which android version is it,, and any screenshots ?? and what's is new in it from the official rom?
do you need to be rooted before this? or can i just flash the file via odin?
i also don't have wifi?
how to install TWRP, as per your instruction TWRP is not installing..
umair_hashmi said:
how to install TWRP, as per your instruction TWRP is not installing..
Click to expand...
Click to collapse
Hey Umair, First of all you have to downgrade your bootloader to C5000ZHU1API2 .. ANd then do the rest of the process. It will work
---------- Post added at 12:50 PM ---------- Previous post was at 12:46 PM ----------
kbajwawt said:
i also don't have wifi?
Click to expand...
Click to collapse
Install the same Bootloader and CSC from the firmware "C5000ZHU1API2" ..
jonathanmohamed said:
0. ALWAYS BACKUP(esp EFS)[/COLOR]
Click to expand...
Click to collapse
how to make a backup if I need a TWRP to do it, but for now I have only stock recovery mode?..
jonathanmohamed said:
3. Disable locks ( disable all FINGERPRINT LOCKs, and OEM lock ). OEM unlock found in developer options, tap build number 7 times to unlock
)
Click to expand...
Click to collapse
Did I get it tight - I will disable it in CROM app (after installing CROM_Service.apk) opened?
jonathanmohamed said:
4. Reboot into download mode. (Make sure CROM Service is unlocked and FRP lock is off.)
)
Click to expand...
Click to collapse
it should be shown somewhere there??
jonathanmohamed said:
4. Reboot into download mode. (Make sure CROM Service is unlocked and FRP lock is off.)
Click to expand...
Click to collapse
what buttons to press to get there?
---------- Post added at 09:17 PM ---------- Previous post was at 09:12 PM ----------
khalidkls said:
updated TWRP for our beloved C5
link is here
Click to expand...
Click to collapse
what TWRP shoud I instal:
1) C5000-TWRP-TEST.tar (15,9 MB (16*762*880 bytes))
or
2) twrp-3.0.3-0-20170303-c5lte.img (15,3 MB (16*095*232 bytes))
?
Cannot open TWRP mode
Hi guys. I am using Baseband version of C5000ZCU1AQC1.
I have already disabled FRP and CROM. And I flashed TWRP using Odin(success) But right now when I follow key sequence and try to boot into TWRP...
It brings me into Recovery.
I cannot access the TWRP.
What is wrong?
At this point should I wipe cache partition & data and then try updating the custom ROM using sdcard? Because if I try to click 'update from sdcard' it shows me that it is not possible.
Also. How to backup everything without TWRP??? This is so confusing. Since I don't have the same firmware version should I just not risk it? Please tell me.
If it's not possible in anyway I would break this phone in two if not.
oz0nex4 said:
Hi guys. I am using Baseband version of C5000ZCU1AQC1.
I have already disabled FRP and CROM. And I flashed TWRP using Odin(success) But right now when I follow key sequence and try to boot into TWRP...
It brings me into Recovery.
I cannot access the TWRP.
What is wrong?
At this point should I wipe cache partition & data and then try updating the custom ROM using sdcard? Because if I try to click 'update from sdcard' it shows me that it is not possible.
Also. How to backup everything without TWRP??? This is so confusing. Since I don't have the same firmware version should I just not risk it? Please tell me.
If it's not possible in anyway I would break this phone in two if not.
Click to expand...
Click to collapse
just flash older Boot loader through ODIN TWRP will work
After flash wifi not work
Overview
This is a patched recovery image which bypasses the usual checks performed during a firmware flash, allowing you to flash unapproved OTA firmwares. For example, the latest FullOTA-MF b394:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can also downgrade without using the b300 rollback package (untested)
Prerequisites
Unlocked bootloader
Rooted
Backup your data (flashing may cause bootloader to re-lock or restore factory default etc. - don't blame me if it goes wrong!)
Instructions
Download firmware:
Use Huawei Firmware Finder (Play Store link) to download the latest firmware files - you will need all 3 zip files:
- update.zip
- update_data_full_public.zip
- update_full_EVA-L09_hw_eu.zip
Tips: check for the latest number (102064 for b394) and ensure you have the larger filesize (around 2GB). For example, these are the latest at time of writing b394:
Flash nocheck recovery:
Reboot device to fastboot mode (power off fully, hold down volume button and connect USB cable)
Run the following to flash recovery:
Code:
fastboot flash recovery eva_l09b391_nocheckrecovery.img
fastboot reboot
Send commands via ADB
Phone should be booted back to system - connect phone via adb and allow root prompt:
Code:
adb shell
su
Create HWOTA folder:
Code:
mkdir /data/update/HWOTA
Copy firmware to HWOTA folder (replace 102064 below with correct value - this is for b394):
Code:
cp /sdcard/HWFF/102064/update* /data/update/HWOTA/
Paste recovery command:
Code:
echo "--update_package=/data/update/HWOTA/update.zip" > /cache/recovery/command
echo "--update_package=/data/update/HWOTA/update_data_full_public.zip" >> /cache/recovery/command
echo "--update_package=/data/update/HWOTA/update_full_EVA-L09_hw_eu.zip" >> /cache/recovery/command
exit
Finally reboot to recovery to start firmware upgrade:
Code:
adb reboot recovery
Firmware should install and reboot automatically
Extras
You can probably Re-Brand to alternative customers too i.e. c636 (Asian region) to c432 (European region). Follow the tutorial here: https://forum.xda-developers.com/honor-8-pro/how-to/oeminfo-c432-t3625886 - you'll need the correct OEMINFO files, this is untested.
Thanks
- Olddroid
- Mankindtw
- Hackslash
- DkiOnline (L09 tester)
- jimz6 (L19 tester)
- LastStandingDroid
XDA:DevDB Information
EVA NoCheck Recovery, Tool/Utility for the Huawei P9
Contributors
Atarii
Version Information
Status: Stable
Created 2017-11-14
Last Updated 2017-11-17
Changelog
31-01-2018
Added L29 recovery image
17-11-2017
Added L19 recovery image
14-11-2017
Initial release
THX, i try and successfully, i am on latest firmware now
rafitcu said:
THX, i try and successfully, i am on latest firmware now
Click to expand...
Click to collapse
Great - thanks for the feedback
Update: I've added the L19 recovery image after successful feedback
updated succesfully.
only two points, on prerequisites I think you should add that the phone should be rooted cause after I flashed the nochechrecovery I needed to reflash twrp and root.
and the second point is that there is missing a / before de * in the step when you copy the 3 zips to data.
nice to know there is a method to bypass the verification on firmwares :good::good:
Can any one try downgrade after update to b394 using b300???
Can one modify the recovery.img file for a certain firmware version other than B391?
kukubau said:
Can one modify the recovery.img file for a certain firmware version other than B391?
Click to expand...
Click to collapse
You haven't read OP #1?
Tecalote said:
You haven't read OP #1?
Click to expand...
Click to collapse
You didn't understand my question.
Can one modify the recovery.img from another firmware package, other than B391?
Let's say I'd like to do a HEX file diff between two image files and modify the img file myself.
Is this possible? What should I look for?
For learning purposes.
kukubau said:
You didn't understand my question.
Can one modify the recovery.img from another firmware package, other than B391.
Let's say I'd like to do a HEX file diff between two image files and modify the img file myself.
Is this possible? What should I look for?
For learning purposes.
Click to expand...
Click to collapse
You can use this recovery with any firmware and ignore the version - I just used b391 as the base as that's the firmware I was on at the time.
You can't modify other recovery images by diffing the hex - you need to disassemble the recovery binary and overwrite the checks with arm assembly
@Atarii
Do you try downgrade using b300 update.app and then to b136 or b182???
Your method it's safe?? What when we brick device
Atarii said:
You can use this recovery with any firmware and ignore the version - I just used b391 as the base as that's the firmware I was on at the time.
You can't modify other recovery images by diffing the hex - you need to disassemble the recovery binary and overwrite the checks with arm assembly
Click to expand...
Click to collapse
Thanks for the clarification.
I've flashed the L19 B391 recovery image and flashed the B391 OTA using your method, but the phone didn't boot afterwards.
I'll try the B390 OTA later today, to see if it makes a difference.
kukubau said:
Thanks for the clarification.
I've flashed the L19 B391 recovery image and flashed the B391 OTA using your method, but the phone didn't boot afterwards.
I'll try the B390 OTA later today, to see if it makes a difference.
Click to expand...
Click to collapse
if not, boot up and hold vol+ like you would enter to twrp, then it should flash automatically.
kukubau said:
Thanks for the clarification.
I've flashed the L19 B391 recovery image and flashed the B391 OTA using your method, but the phone didn't boot afterwards.
I'll try the B390 OTA later today, to see if it makes a difference.
Click to expand...
Click to collapse
Did you use the 2GB file?
Atarii said:
Did you use the 2GB file?
Click to expand...
Click to collapse
Yes.
---------- Post added at 02:55 PM ---------- Previous post was at 02:53 PM ----------
dkionline said:
if not, boot up and hold vol+ like you would enter to twrp, then it should flash automatically.
Click to expand...
Click to collapse
I've flashed my phone and unbricked it hundreds of times.
I've even posted an unbrick guide here on XDA forums.
I guess I know how to force flash it using the three key combo.
chudy_85 said:
@Atarii
Do you try downgrade using b300 update.app and then to b136 or b182???
Your method it's safe?? What when we brick device
Click to expand...
Click to collapse
I haven't personally tested this but I know others have for other device - so use at your own risk
kukubau said:
Yes.
---------- Post added at 02:55 PM ---------- Previous post was at 02:53 PM ----------
I've flashed my phone and unbricked it hundreds of times.
I've even posted an unbrick guide here on XDA forums.
I guess I know how to force flash it using the three key combo.
Click to expand...
Click to collapse
Im not using 3 key, only 1.
If not boot, you have manually boot with key i posted before.
This is so nice. Is it possible to make one for PO Plus, VIE-L09 and VIE-L29? Thanks
dkionline said:
Im not using 3 key, only 1.
If not boot, you have manually boot with key i posted before.
Click to expand...
Click to collapse
Doesn't boot into android os, no matter what.
I'll post a follow up after I try the B390 fw, maybe incremental updates are required.
1. Download Chinese ROM, then copy the downloaded .zip to your phone’s root storage folder
URL: http://ui.nubia.cn/rom/detail/62
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Go to 'Settings' - 'System update', click the 'Settings' icon (the three dots) on the top right corner, choose 'Local update', find the .zip file and click on 'Install now' button to confirm.
3. Go to 'Settings' - 'Other system settings' - 'Reset options' , do a factory reset
Q&A:
1. Q: Does it work with unlocked boot loader?
A: Yes.
2. Q: Can I flash back to global ROM?
A: Yes, here is guide: https://eu.redmagic.gg/blogs/news/red-magic-3-global-rom-flash-instructions
3. Q: Does it have multi language support?
A: Yes.
4. Q: Can I install Google services on it?
A: Yes, but Root is needed. Here is guide: https://forum.xda-developers.com/red-magic-3/how-to/guide-install-gapps-red-magic-3-t3933153
Another method is install TWRP, then flash open gapps :https://opengapps.org/
5. Q: What's the advantage of Chinese ROM?
A: Theme support, Dark Mode, DC Dimming, RedMagic OS 2.0, etc..
6. Q: What's the disadvantage of Chinese ROM?
A: Too much nubia services, more memory usage, ad notifications.
Hi,
Thanks...
Two questions :
1°) Are there other language than Chinese/English in the Chinese ROM ?
2°) Is it possible to install Google Play services and Store on the Chinese ROM ?
Regards.
Hello, there is one issue I am facing after flashing Chinese rom over global that now on startup it's asking me the password of 4 digits but on global, I had set up 6 digits password now it ain't going nowhere :laugh:
This should be updated if there is a way to get Google play store and services.
100% same like oneplus system
---------- Post added at 04:35 PM ---------- Previous post was at 04:32 PM ----------
NexusPenguin said:
Hi,
Thanks...
Two questions :
1°) Are there other language than Chinese/English in the Chinese ROM ?
2°) Is it possible to install Google Play services and Store on the Chinese ROM ?
Regards.
Click to expand...
Click to collapse
1. Have multi language,not only chinese and english
2. Must unlock bootloader then root and you can install playstore in chinese rom
how do you install google play and gapps?
I have heared that flashing gapps alone isnt enough and there are problems such as not being able to download big apps.
even after root, what do you need to do to enable gapps?
please make a little guide
andixxx81 said:
100% same like oneplus system
---------- Post added at 04:35 PM ---------- Previous post was at 04:32 PM ----------
1. Have multi language,not only chinese and english
2. Must unlock bootloader then root and you can install playstore in chinese rom
Click to expand...
Click to collapse
Hi,
Hum... And how do I install the Play Store ?
If you could give us a hint that would be appreciated.
Regards.
changguangyu said:
1. Download Chinese ROM, then copy the downloaded .zip to your phone’s root storage folder
URL: http://ui.nubia.cn/rom/detail/62
2. Go to 'Settings' - 'System update', click the 'Settings' icon (the three dots) on the top right corner, choose 'Local update', find the .zip file and click on 'Install now' button to confirm.
3. Go to 'Settings' - 'Other system settings' - 'Reset options' , do a factory reset
Q&A:
1. Q: Does it work with unlocked boot loader?
A: Yes.
2. Q: Can I flash back to global ROM?
A: Yes, here is guide: https://eu.redmagic.gg/blogs/news/red-magic-3-global-rom-flash-instructions
3. Q: Does it have multi language support?
A: Yes.
4. Q: Can I install Google services on it?
A: Yes, but Root is needed. Here is guide: https://forum.xda-developers.com/red-magic-3/how-to/guide-install-gapps-red-magic-3-t3933153
Another method is install TWRP, then flash open gapps :https://opengapps.org/
5. Q: What's the advantage of Chinese ROM?
A: Theme support, Dark Mode, DC Dimming, RedMagic OS 2.0, etc..
6. Q: What's the disadvantage of Chinese ROM?
A: Too much nubia services, more memory usage, ad notifications.
Click to expand...
Click to collapse
then copy the downloaded .zip to your phone’s root storage folder.
Please can someone explain what this mean
Where to keep the file and where is the root storage folder...
Sorry for such annoying question.
rajnathr said:
then copy the downloaded .zip to your phone’s root storage folder.
Please can someone explain what this mean
Where to keep the file and where is the root storage folder...
Sorry for such annoying question.
Click to expand...
Click to collapse
The root storage folder is your internal storage, it is the drive that you see when you connect the phone to your PC.
loop
I do the local update now it loops 2 times to original recovery and cant start the phone.
Can you help me?
pinseman said:
I do the local update now it loops 2 times to original recovery and cant start the phone.
Can you help me?
Click to expand...
Click to collapse
Enter recovery mode
Clear cach and user data
Reboot
It will reboot 3 times wait for it
System update
If it's a ROM of China, can I update OTA?
whether it will affect or damage the system
Please tell me about update softwere before I cange china Rom
i got this this error when my phone is starting and even when i enter recovery
i only have fastboot acess i tried flashing every rom (china and global) but no luck
( ( your device is corrupt .it can't be trusted and will not boot
visit this link on another device ))
Not trusted device
Hello there. I followed your instruction, but when my phone restarted i got a messega "Your device is corrupt. It can't be trusted and will not boot". What can i do?
lurzsi said:
Hello there. I followed your instruction, but when my phone restarted i got a messega "Your device is corrupt. It can't be trusted and will not boot". What can i do?
Click to expand...
Click to collapse
Did you unlock the bootloader at first?
souma_rox said:
Did you unlock the bootloader at first?
Click to expand...
Click to collapse
No i didn't. Of corse debugging is On my phone but did not turned off the oem unlock. What can i do now?
System is corrupt...
lurzsi said:
No i didn't. Of corse debugging is On my phone but did not turned off the oem unlock. What can i do now?
Click to expand...
Click to collapse
You have to unlock the bootloader, say yes on the phone when prompted, it will wipe everything and give you an unlocked installation. All the work is from ADB / Fastboot, see the XDA guide.
So before you do any rom flashing steps do i need to have bootloader unlocked first?
criptos said:
So before you do any rom flashing steps do i need to have bootloader unlocked first?
Click to expand...
Click to collapse
do u solved it? im stuck
EXAMPLE: USE IN ROM NA V1.18
1) Install Magisk.apk.
2) Unpack ROM V1.18 and copy file boot.img of system to smartphone.
3) Open app Magisk in smartphone and pick line Magisk -> Install -> Install -> "Select file patch" and pick file boot.img copy of 2).
4) Please wait Magisk flash ok and copy file /Download/magisk_patched.img to folder adb in PC.
5) Connect smartphone to PC=cable USB Type C and Open cmd in folder adb and type line command:
adb devices
adb reboot bootloader
fastboot devices
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
6) Please wait flash ok and reboot system. Enjoy
***NO DATA LOSS***
*Picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pic 1: https://drive.google.com/file/d/1-GbpwW1GuotqBLxFBfID43EQwfkaYrY1/view?usp=drivesdk
Pic 2: https://drive.google.com/file/d/1-MIidp3OlzApxgcGkhRyQO2N25vPza6r/view?usp=drivesdk
It wont remove my data right? And it's safe?
---------- Post added at 04:20 PM ---------- Previous post was at 04:18 PM ----------
One more question how to get the boot.img in the first place?
souma_rox said:
It wont remove my data right? And it's safe?
---------- Post added at 04:20 PM ---------- Previous post was at 04:18 PM ----------
One more question how to get the boot.img in the first place?
Click to expand...
Click to collapse
Extract it from Rom zip.
Enviado desde mi NX629J mediante Tapatalk
Tryed it. Resulted in a your device is corrupt.
Easy fox if you guys try this.
Download the recovery tool posted. Fallow those instructions. Then download the NA ROM red magic and put the zip in the root of the phone. On the phone go to system update and update front hat zip and you are back up and running on V1.18
bignazpwns said:
Tryed it. Resulted in a your device is corrupt.
Easy fox if you guys try this.
Download the recovery tool posted. Fallow those instructions. Then download the NA ROM red magic and put the zip in the root of the phone. On the phone go to system update and update front hat zip and you are back up and running on V1.18
Click to expand...
Click to collapse
He left out an important step. This needs to be done BEFORE doing anything on the phone.
"4. open cmd, then type adb reboot bootloader , then phone will reboot to fastboot mode.
5. Use fastboot flashing unlock, use volume key select unlock , confirm with power button , then the phone will do factory reset and reboot. Now the phone is unlocked"
Can I do that on my red magic 3s?
Thank
thanks finally
So I can flash without unlocking bootloader? I've got to much info on this phone to just let it be erased. And don't have the time to copy everything before doing it. I appreciate your time
gdaddy3315 said:
So I can flash without unlocking bootloader? I've got to much info on this phone to just let it be erased. And don't have the time to copy everything before doing it. I appreciate your time
Click to expand...
Click to collapse
Nope. U have to unlock first which will erase ur drive. I think the instructions here are incomplete to unlock the bootloader. Search for main thread
Can i hv the changelogs?
good work but lost my wifi i.e bricked
I try yhis 100 time . Totally i got : device is corrupt . What problem why some pple can root it and others cant.
hoichemgio9x said:
EXAMPLE: USE IN ROM NA V1.18
1) Install Magisk.apk.
2) Unpack ROM V1.18 and copy file boot.img of system to smartphone.
3) Open app Magisk in smartphone and pick line Magisk -> Install -> Install -> "Select file patch" and pick file boot.img copy of 2).
4) Please wait Magisk flash ok and copy file /Download/magisk_patched.img to folder adb in PC.
5) Connect smartphone to PC=cable USB Type C and Open cmd in folder adb and type line command:
adb devices
adb reboot bootloader
fastboot devices
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot magisk_patched.img
6) Please wait flash ok and reboot system. Enjoy
***NO DATA LOSS***
*Picture:
Click to expand...
Click to collapse
I want to unroot my phone and restore stock boot image so what should I do first? Uninstall magisk or flash the stock boot image first?
souma_rox said:
I want to unroot my phone and restore stock boot image so what should I do first? Uninstall magisk or flash the stock boot image first?
Click to expand...
Click to collapse
You flash stock boot image and device unroot
souma_rox said:
I want to unroot my phone and restore stock boot image so what should I do first? Uninstall magisk or flash the stock boot image first?
Click to expand...
Click to collapse
sherreer said:
I try yhis 100 time . Totally i got : device is corrupt . What problem why some pple can root it and others cant.
Click to expand...
Click to collapse
you may have missed or missed a certain step
ghostknightfire said:
good work but lost my wifi i.e bricked
Click to expand...
Click to collapse
People still function normally. Which ROM do you flash for?
ghostknightfire said:
Can i hv the changelogs?
Click to expand...
Click to collapse
Please describe in more detail
lionhealth said:
Can I do that on my red magic 3s?
Thank
Click to expand...
Click to collapse
yes. You can. Good luck
gdaddy3315 said:
So I can flash without unlocking bootloader? I've got to much info on this phone to just let it be erased. And don't have the time to copy everything before doing it. I appreciate your time
Click to expand...
Click to collapse
Unlocking bootloader not loss data