in the name of allh
Infinix Note 3 Pro X601 or infinix note 3 pro
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Review the phone
1- root the phone
How to Root Infinix Note 3 X601/Pro X537 and Port TWRP Recovery Image
Infinix Note 3 and its Pro version are the latest phones from Infinix mobility, though the pro version is not yet available in Nigeria. This article will guide you on how to easily install/port twrp recovery and root infinix Note 3 X601 and Note 3 X537.
Requirements
1-twrp from here "note 3 and note 3 pro "
2- sp flash tool here
3-USB Vcom here
4- super user here
5- pc
6- usb cabel
ltes go >>>
First, install the Mediatek Vcom driver on your computer.
Mediatek USB Vcom Drivers: Download and Manually Install MTK Preloaded USB VCOM Port Drivers on Windows 10/8.1/8/7/Vista/Xp.
Mediatek is one of the most popular and used mobile chipset, it powered numerous Android smartphones especially those produce by Chinese companies. MTK devices are easier to root and changing of IMEI on them is super easy when compared to other chipset. This article will guide you on how to install mediatek USB vcom drivers on any windows computer/Pc which include Windows 7, 8, 8.1, Vista, Xp and Windows 10.
Vcom driver is an essential tool that must be installed on your Windows PC before you can flash a custom ROM, install firmware upgrade or most importantly when trying to unbrick your mediatek device. Without mediatek USB Vcom Drivers properly installed on your Windows 10 computer, SP Flash tool or any other recommended tool will not be able to detect your MTK device like Tecno, Infinix, InnJoo, Xiaomi, Gionee etc. Without these tools detecting your device, there won’t be flashing or upgrading of ROM.
Now that you know why installation of Mediatek Preloaded USB Vcom port driver on your Windows Pc is important, below are the necessary things you should do before initiating the installation process.
1.) Disable driver signature enforcement: It is a security measures Microsoft put in place to avoid installation of unsigned/unrecognized drivers. Since Mediatek USB vcom drivers is not digitally signed, you have to permanently or temporarily disable it before you can install MTK Preloaded USB Vcom driver. To avoid to much digression, please check our previous post for this guide.
2.) Computer: Your Pc must be running either Windows 10, 7, 8.1, 8, Vista or XP to install the MTK preloaded driver.
3.) Mediatek USB Vcom Drivers: Off course you have to download the driver before you can install it. Visit (https://www.datafilehost.com/d/309cd7f0) to download MTK port driver. Works for all MTK65XX including MTK6582, MTK6592 /MTK6589 / MTK6577.
4.) Guide: To have a successful Installation of MTK Vcom Port driver, follow the steps below thoroughly.
How to Install Mediatek USB Vcom Drivers on Any Windows Pc.
Step 1: I will assume you have already downloaded mediatek usb vcom drivers from the URL posted above. Extract it content to your desktop using WinZip, 7Zip or any extracting software installed on your Pc.
Step 2: Hold Win + R key to launch the Run dialogue box >> type devmgmt.msc and click on OK or hit Enter key to open up Device Manager. Alternatively, you can also open Control panel >> Search for Device manager >> Double click to open it. Windows 10 users can also right click on the start menu and click on Device Manager.
Step 3: Click on your Computer name or any other installed driver >> Click on the Action tab >> Select Add Legacy Hardware.
Step 4: A new Windows will Pop saying Welcome to the Add Hardware wizard, Click on Next.
Step 5: From the new page, select the second option that says Install the hardware that I manually select from a list (Advanced), then click on Next.
Step 6: On the Next screen, make sure the Show All Devices option is selected and click on Next.
Step 7: Click on Have Disk on the Next Screen >> Then click on Browse >> navigate to desktop or the folder you extracted the Vcom drivers into.
Step 8: Open it and navigate to USB VCOM drivers >> Select your version of Windows >> Select your System type either 32 bit or 64 bit >> Click on Open. Windows 8, 8.1 and 10 users should select Win 7
Step 9: On the next screen, select MediaTek Preloader USB VCOM Port and click on Next. Click on Next again to initiate the installation process and select Install this driver software anyway when prompt.
Step 10: Wait for few seconds for the installation to complete. You might see error like this device cannot start. (Code 10), ignore and click on Finish.
That’s it, Mediatek USB Vcom Drivers has been successfully installed on your Windows PC. You can proceed to flashing of Custom or Stock ROM, upgrading of firmware and unbricking of any bricked MTK device.
- Start by extracting the TWRP recovery file for your Note 3 Pro to your folder of choice. Am assuming you already downloaded the specific one from the links provided above.
-Then extract the SP flash tool also to a folder of your choosing then run the run the flash_tool.exe as administrator.
-Open the extracted SP flash tool folder, locate the SP flashtool .exe file and run it as an administrator, click the scatter-loading or browse option, depending on the sp flash tool in use, then navigate to the extracted TWRP recovery folder and select the txt recovery image for your device labeled scatter.txt.
-Once it loads up, Untick all the other options as you don’t need them and only select recovery.
-Before going to the next step, make sure you have turned on USB debugging on your device. You can do that by navigating to the Settings then Developer Options. Turn it on by checking the box after USB DEBUGGING.
-Turn off your phone, click the Download button of the SP flash tool. Connect the device to your computer using the USB cable from the manufacturer and the download will start.
-The process of installing the TWRP recovery tool on your device will begin and end when you see a green button. Unplug your device.
That is the first stage. The next stage is the most important so stay attentive.
Step 2: How to root Infinix Note 3 Pro
-The first stage is moving the SuperSu.Zip file to the internal memory of your device or to an SD card in your phone. Advised to copy it to the main folder.
-Boot your phone into recovery mode. You can do that by pressing and holding the power and volume up buttons together. In this mode, your arrow keys will be the volume keys while your power button the selection tool.
-From the options on the screen, choose to install from sd card.
-Locate the SuperSu.Zip file then select it using the power button.
-The process of rooting and flashing your phone will begin after the selection of this file.
-Following the completion of the installation of the SuperSu.Zip file, reboot your device using the power button.
Congratulations, you have just rooted your Infinix Note 3 (Pro)! You may have noticed that to root Infinix Note 3 Pro requires two main stages. Be sure you follow them strictly since they only work in that order.
Note: Incase you brick your infinix note 3 or note 3 pro phone in the process and you are unable to power it on, you can download the INfinix Note 3 Romor here and note 3 pro rom and flash it on your phone using the Infinix SP flash tool downloaded above to restore your phone. Make sure you use the specific Rom to your NOTE 3 phone.
the end i hope some one here made a cus rom for the phone .
Important
Already tried this method 2 weeks ago , I would like to add that , you have to flash the su zip file after flashing the custom recovery whatever it was , (I installed CTM recovery),to avoid the boot loop, don't start you device , just flash the su zip after the recovery
I HAVE A PECULIAR PROBLEM! I have an Infinix Note 3 X601, updated to Android N, Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem began when I tried to factory reset it from within the settings, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. if i connect it to pc, the pc wont recognise it, the pc will show a message that the USB device is not recodnisd, and the phone will boot to recovery again.
i tried to reflash the stock firmware using sp flashtool and it always fails as the system will not recognise the phone, even though i have the required mtk drivers installed.
i tried to flash this https://androidhq254.blogspot.com.ng...te-3-x601.html and http://bbs.infinixmobility.com/thread-149453-3-1.html custom roms using the custom recovery, they all fail mid way.
i will appreciate any help i can get in reviving this phone. thanks in advance
P.S
when i try to flash a rom through recovery it shows:
mount system partition
mount: failed to mount /dev/block/platform/mtk-mdc.0/11230000.mdc.0/by-name/system at /system: no such file or directory
unmount system partition
unmount of /system failed: no such volume
format system partition
E:Error in /storage/sdcard/........
(status0)
installation aborted
what do you make of this pls?
degreatone said:
I HAVE A PECULIAR PROBLEM! I have an Infinix Note 3 X601, updated to Android N, Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem began when I tried to factory reset it from within the settings, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. if i connect it to pc, the pc wont recognise it, the pc will show a message that the USB device is not recodnisd, and the phone will boot to recovery again.
i tried to reflash the stock firmware using sp flashtool and it always fails as the system will not recognise the phone, even though i have the required mtk drivers installed.
i tried to flash this https://androidhq254.blogspot.com.ng...te-3-x601.html and http://bbs.infinixmobility.com/thread-149453-3-1.html custom roms using the custom recovery, they all fail mid way.
i will appreciate any help i can get in reviving this phone. thanks in advance
P.S
when i try to flash a rom through recovery it shows:
mount system partition
mount: failed to mount /dev/block/platform/mtk-mdc.0/11230000.mdc.0/by-name/system at /system: no such file or directory
unmount system partition
unmount of /system failed: no such volume
format system partition
E:Error in /storage/sdcard/........
(status0)
installation aborted
what do you make of this pls?
Click to expand...
Click to collapse
Brother, solve this problem in the drivers of mobile I advise you to download a new Windows and setup drivers and sp flsh tool
PLS File Name Is TWRP_X601-H536-Note3.rar Is It Work For H537 (Note 3 Pro) Also ?
I m using note 3 pro running nougats
I have tried to root using above method and got OK sign on sp flash tool.. after that when i try to restart in recovery mode its always restart in stock recovery instead of twrp or other
Kindly help as i have to root my device in any way
komalsaeed said:
I m using note 3 pro running nougats
I have tried to root using above method and got OK sign on sp flash tool.. after that when i try to restart in recovery mode its always restart in stock recovery instead of twrp or other
Kindly help as i have to root my device in any way
Click to expand...
Click to collapse
Is your problem solved now? I also have infinix note 3 pro using crlivtouch recovery and everything is ok
Any Custom Rom For X601 PLS Or How To Port Any Rom For This Device @elbana10
other link for super su please
Hi,
I would like to ask about my note 3 pro infinix
my phone was fine till I fine HD games. felt so slow and lag.
so I decided to root it by myself
I wasnt back up the ROM early. its my first time to root mediatek device..
in the middle of processing with flash tool. I "accidentally" klik format+download which made my phone dead.
I was frustated for 2 day to ressurect the phone. I searched for the ROM to flash it again. many ROM I tried. but then I found one. and my phone live again.
but then I notice there's was some error
1. wifi error NVRAM 0x10
2. battery is draining fast in idle state
so then I ask someone to root my phone. because rooting infinix note 3 pro is a pain. I got problem with some TWRP recovery booting. (when I press volume up + power button it wont boot the TWRP recovery,neither CTR).
and then my phone was rooted.
I tried to fix about NVRAM error WIFI with some tutorial in XDA forum . then it fixed
but the battery issue still there. I tried to calibrate it with some root apps,tried to empty to 0% and charge it to 100%, and I tried Lspeed app and HEBF app but the battery still a pain for idle state.
I notice it drops 30% - 40% per night (about 6 hours)
and I notice theres is an error. my SIM2 IMEI is wrong.
how can I fix the battery ?
before I bricked it the battery was super save. when I ressurect it the battery is a pain for idle state.
did I flash a wrong ROM
It was my fault I didnt back up the ROM
and didn't save the build number
I lives in Indonesia. so flash ROM for Indonesia
I got that ROM from Xclub forum
but the battery issue wont solve
please help
Lordgfreeze said:
Is your problem solved now? I also have infinix note 3 pro using crlivtouch recovery and everything is ok
Click to expand...
Click to collapse
Yes its aright now using CTR. Pretty easy to use. Thank you
Related
Since here every day again and again problems with the USB VCOM driver installation for MTK6577 appear Phones, here is a short guide to the installation, and a final, successful test with SPFlashtool!
Installation of the USB VCOM driver:
[1] With USBDeview, clean up your PC from all possible old MTK VCOM entries, then reboot your PC.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[2] Smartphone is switched off, and still dont connect via USB to the PC.
[3] Open Device Manager and leave it open!
[4] Your switched off Smartphone with inserted rechargeable battery via USB connect now on the PC, you should now see a MT65xx preloader in the Device Manager.
(With some MTK6577 Smartphones should be installed without battery. Please before hand inform.)
[5] now launch the Installdriver.exe from the unzipped MT6577 USB VCOM drivers folder. Confirm the installation of unsigned drivers
[6] now! (W7 x 64 this confirmation comes later in the manual installation!) After the installation is complete, you have no entry in the Device Manager, it is correctly!
[7] PC reboot!
[8] Open Device Manager and open the switched-off Smartphone via USB to the PC release, now connect (same USB port!)
[9] Now a MediaTek PreLoader USB VCOM should appear for a brief moment in the Device Manager entry!
[10] At the moment the entry double click and click on "Update driver" under the tab "Driver".
[11] With the wizard in the unzipped MTK 6577 USB VCOM drivers navigate and select the folder for your operating system.
Required Downloads:
Download MT6577 USB VCOM Driver (W7/Vista/XP) -> http://www.mediafire.com/?cypm22rgs2k83ji
Download MT6577 USB VCOM Driver (W8) -> http://www.mediafire.com/?7yee2of64nhl947
Download USBDeview -> http://www.mediafire.com/?becpnj761zh5o2w
Download USBDeview x64 -> http://www.mediafire.com/?41i2k36yyi1fzhz
Click to expand...
Click to collapse
Reserved
kumar abhishek said:
Reserved
Click to expand...
Click to collapse
any way to instal and make it work on win 8 ??
shivinxtreme said:
any way to instal and make it work on win 8 ??
Click to expand...
Click to collapse
same here not working on win 8 x64 bit
mohsin2cool said:
same here not working on win 8 x64 bit
Click to expand...
Click to collapse
Can u explain the full problem?
Sent from my Micromax A75 using Tapatalk 2
After installing all drivers and connecting the phone to pc without battery, the device manager shows it as mt65xx preloader.. but in few seconds it goes off . It comes as an unknown device..
Sent from my Micromax A116 using xda premium
ME Test In Win 7 SP1 Not Work.
---------- Post added at 10:56 AM ---------- Previous post was at 10:10 AM ----------
Plz Help For Install Driver.
Not Fixed?
Why??????????????????????????????
AhrimanSefid said:
Not Fixed?
Why??????????????????????????????
Click to expand...
Click to collapse
@AhrimanSefid
Check this file and see images for install driver in W7. Remember, install this as administrator. Installation also depends on the version of w7, it is x32 or x64.
Install drivers - Win7.rar
shivinxtreme said:
After installing all drivers and connecting the phone to pc without battery, the device manager shows it as mt65xx preloader.. but in few seconds it goes off . It comes as an unknown device..
Sent from my Micromax A116 using xda premium
Click to expand...
Click to collapse
Don't worry about that "unknown device"
You can connect your phone and continue to Flash.
If driver is not there for your phone then SP Flash Tool will keep on searching for your phone.
If driver is installed then SP Flash Tool will continue and start Flashing your phone.
shivinxtreme said:
any way to instal and make it work on win 8 ??
Click to expand...
Click to collapse
hi,, did you guys get the drivers to work on win 8 ??
If yes, do let me know how you did it..
thanks
greg
Not working in windows 7.. Already tried this process several times..
Sent from my GT-I9300 using Tapatalk 2
tapan15in said:
Not working in windows 7.. Already tried this process several times..
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Sometimes SP Flash tool is main culprit.
U need to use appropriate version
Sent from my C6502 using Tapatalk 2
help
kumar abhishek said:
Since here every day again and again problems with the USB VCOM driver installation for MTK6577 appear Phones, here is a short guide to the installation, and a final, successful test with SPFlashtool!
Installation of the USB VCOM driver:
[1] With USBDeview, clean up your PC from all possible old MTK VCOM entries, then reboot your PC.
[2] Smartphone is switched off, and still dont connect via USB to the PC.
[3] Open Device Manager and leave it open!
[4] Your switched off Smartphone with inserted rechargeable battery via USB connect now on the PC, you should now see a MT65xx preloader in the Device Manager.
(With some MTK6577 Smartphones should be installed without battery. Please before hand inform.)
[5] now launch the Installdriver.exe from the unzipped MT6577 USB VCOM drivers folder. Confirm the installation of unsigned drivers
[6] now! (W7 x 64 this confirmation comes later in the manual installation!) After the installation is complete, you have no entry in the Device Manager, it is correctly!
[7] PC reboot!
[8] Open Device Manager and open the switched-off Smartphone via USB to the PC release, now connect (same USB port!)
[9] Now a MediaTek PreLoader USB VCOM should appear for a brief moment in the Device Manager entry!
[10] At the moment the entry double click and click on "Update driver" under the tab "Driver".
[11] With the wizard in the unzipped MTK 6577 USB VCOM drivers navigate and select the folder for your operating system.
Click to expand...
Click to collapse
Nt working with even windows 7....
i tried it many times bt unsuccessful.. i followed all d steps bt unable to find where d problem is?
when i connected usb without battery , the drivers installed sucessfuly bt device manager hadnt displayed mtk drivers... after rebooting my pc and i connected phone to pc with usb.. and d next moment the message displayed is drivers are nt installed ... and i checked out device manager bt it showing only micromax a90s which is nt connected.. i mean nt working.... any solutions for this... i wanna use uah rom bt hate this all bull ****s... waiting for uah help.....
Worked on Windows 8... Please follow the correct procedure. Just i flashed TWRP and replaced CMW (for testing only) and work fine.
If needed, i can post again the full procedure to flash CMW / TWRP / LEWA recovery.
Thanks
apoorv.mehrotra said:
Worked on Windows 8... Please follow the correct procedure. Just i flashed TWRP and replaced CMW (for testing only) and work fine.
If needed, i can post again the full procedure to flash CMW / TWRP / LEWA recovery.
Thanks
Click to expand...
Click to collapse
Please do..:good:
StanleyD said:
Please do..:good:
Click to expand...
Click to collapse
Hello All,
I tried both on window 7 & 8; 64 bit and procedure as mentioned by the OP is perfect; however i am posting it again here
1) Download the flash tools from anywhere preferably most updated one: SP_Flash_Tool_v3.1224.01
2) Download the recovery which ever you like TWRP / CMW (I tried both of them now and they are working for me on MMX A110)
3) In your desktop / laptop please ensure you allow installation of unsigned drivers (youtube will help for this)
4) Download and install MTK6577 Drivers for your device (this will only work after you clear step 3)
5) If still not working, download USBDEVIEW (usb driver remover) and run it as "Administrator" uninstall all the USB drivers relevant to your device and repeat above steps
6) Now connect your phone, with portable media option selected in USB or the default mode. Let it install and finish
7) Once done switch-off your phone while it is connected through USB (Again this will install a driver which will look like MTK65xx something...
8) Remove the battery of phone let your PC install the driver again (battery not plugged in, only phone connected with USB). You will see for a shot time that charging icon will appear on phone and disappear; this will install something in the background again on your PC
10) To confirm this, put your battrey again back in your phone with USB (still) connected to PC
11) go to system manager of your PC and look for MTK 6577 something ... something... driver
12) Now disconnect your phone and switch it on
13) Start the flash tool
14) Select the recovery option only in tool (TWRP / CMW / LEWA Whichever you like)
15) Click download
16) Connect your phone (which i assume is switched on), once you connect switch it off (no need to remove battery or anything)
18) Look at the status bar of your flash tool (nothing to worry, no need to do anything)
19) RED Bar -> Yellow Bar -> Green Ring
20) Disconnect
21) Reboot in recovery (TWRP / CMW / LEWA) is flashed...
video tutorial
apoorv.mehrotra said:
Hello All,
I tried both on window 7 & 8; 64 bit and procedure as mentioned by the OP is perfect; however i am posting it again here
1) Download the flash tools from anywhere preferably most updated one: SP_Flash_Tool_v3.1224.01
2) Download the recovery which ever you like TWRP / CMW (I tried both of them now and they are working for me on MMX A110)
3) In your desktop / laptop please ensure you allow installation of unsigned drivers (youtube will help for this)
4) Download and install MTK6577 Drivers for your device (this will only work after you clear step 3)
5) If still not working, download USBDEVIEW (usb driver remover) and run it as "Administrator" uninstall all the USB drivers relevant to your device and repeat above steps
6) Now connect your phone, with portable media option selected in USB or the default mode. Let it install and finish
7) Once done switch-off your phone while it is connected through USB (Again this will install a driver which will look like MTK65xx something...
8) Remove the battery of phone let your PC install the driver again (battery not plugged in, only phone connected with USB). You will see for a shot time that charging icon will appear on phone and disappear; this will install something in the background again on your PC
10) To confirm this, put your battrey again back in your phone with USB (still) connected to PC
11) go to system manager of your PC and look for MTK 6577 something ... something... driver
12) Now disconnect your phone and switch it on
13) Start the flash tool
14) Select the recovery option only in tool (TWRP / CMW / LEWA Whichever you like)
15) Click download
16) Connect your phone (which i assume is switched on), once you connect switch it off (no need to remove battery or anything)
18) Look at the status bar of your flash tool (nothing to worry, no need to do anything)
19) RED Bar -> Yellow Bar -> Green Ring
20) Disconnect
21) Reboot in recovery (TWRP / CMW / LEWA) is flashed...
Click to expand...
Click to collapse
Plz can anyone post video tutorial of installing this rom do favour
I've followed ALL the instructions word for word now and still can't get it to install the MT6577 drivers correctly. I've tried the OP's method as well as apoorv.mehrotra's method. Have rebooted my PC now 28 times! Still can't get it to work. I have exactly the same problem as everyone else - the phone appears in device manager for 3 seconds then disconnects suddenly. Even the legacy installation method does not work. I've tried on a Windows 7 64-bit machine as well as a Windows XP 32-bit machine - exactly the same outcome each time.
Help!
It worked on my windows 8 x64. To install these drivers you need to bypass driver signature enforcement. Follow the instructions at http://www.craftedge.com/tutorials/driver_install_windows8/driver_install_win8.html
Hello everyone, I was going through the threads and found out that there is no thread/device forum for Simmtronics Xpad Freedom.
It is a tablet running Android JB 4.2.2. It is a MTK based tablet (MTK6589).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE
Before starting, i would like to thank all the devs whose efforts made it possible to get the maximum potential of our device..
UPDATE: 1) Flashable Rom added (Flash using SP Flash Tools)
2) Stock Recovery Added.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
INDEX
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1. USB DRIVERS AND ADB INSTALLER
2. ROOTING THE TABLET
3. BACKING UP/ ROM DUMP
4. INSTALLING CWMR (ClockWorkMod Recovery)
5. FLASHING A ROM
6. FLASHABLE ROM DUMP
7. STOCK RECOVERY
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1) USB DRIVERS AND ANDROID ADB INSTALLER:-
NOTE: BEFORE DOING ANYTHING PLEASE INSTALL THESE DRIVERS/ SOFTWARES FIRST AS THEY ARE NECESSARY FOR PERFORMING OPERATIONS.
Tools Req:
1. USB VCOM Drivers for WINDOWS XP, WINDOWS 7 (http://www.4shared.com/rar/bHo5aN73/Usb_Vcom_Auto_Installer_v11236.html)
USB VCOM Drivers for WINDOWS 8/8.1: (http://www.patchworkoftips.com/how-to-install-mediatek-usb-vcom-driver-for-windows-88-1/3717/)
2. Adb Driver installer (https://drive.google.com/file/d/0B0MKgCbUM0itVVFWRC02Q0VBQnc/view?usp=sharing)
3. MTK DROID Tools (http://www.mediafire.com/download/6z9acf5um65cuj2/MtkDroidTools+v2.5.3.zip)
4. SP FLASH TOOLS (http://d-h.st/w6v or http://www.mediafire.com/download/aix6jxmcbxmmc2b/SP+Flash+Tool+3.1352.01+(5.1352.01).rar.html)
1.1) INSTALLING USB VCOM DRIVERS
For Installing USB VCOM DRIVERS ON WINDOWS 8, 8.1 Click Here http://www.patchworkoftips.com/how-to-install-mediatek-usb-vcom-driver-for-windows-88-1/3717/
Installing USB VCOM Drivers on WINDOWS XP , WINDOWS 7 :
1. Connect your tab to the pc
2. Open Adb Driver installer on the pc. You will see your device in the list. Now click on Install button..
3. It will star installing the drivers and when it finishes its job a message will be displayed saying Adb driver installed.
4. Now extract USB VCOM drivers.. You will see these files in the folder
5. Now click on Install.bat. You will see a cmd prompt window..
6. Now click any button to close this window..
7. Now open adb 15 second installer.. you will see a security warning window.. Don’t worry just click run..
8. ADB 15 second installer window opens up asking for permission to install ADB and Fastboot.
9. Just type Y and press enter.You will see the following message.
10. It will ask you if you want to install device drivers.Type y and press enter.. It will display Device driver installation window.
11. Click Next.. It will start installing the drivers..When finished installing the drivers click on Finish.
________________________________________________________________________________________
2. ROOTING THE TABLET:-
Update: You can also Root the device using Kingroot, Vroot
There are 2 ways in which you can root your device.. I will post both the methods..
::::::::::: METHOD 1 :::::::::::
Tools required:
1. Framaroot (http://forum.xda-developers.com/showthread.php?t=2130276)
Procedure:
1. Download latest Framaroot from the link given above
2. Make sure USB Debugging is enabled on your phone.If it is enabled proceed to STEP 8 , else follow these steps to enable USB Debugging first.
3. Go to Settings --> About tablet
4. Keep tapping on Build number till you get Developer option in settings
5. Go to Developer Option
6. Enable the developer option --> Click OK
7. Now click on USB Debugging --> Click OK
8. Go to security --> Click on Unknown sources --> Click OK to enable installation from unknown sources.
9. Now copy and paste the latest Framaroot to the desired location (Phone memory or Sdcard) by connecting it via usb and enabling USB mass storage.
10. Disconnect your phone and open File Manager.. Click on the internal storage if you have copied Framaroot to the internal storage else click on External Storage if copied to sdcard..
11. Find Framaroot in the desired location and click on it..You will see the following window on your tablet.
12. Click on Install.. Now open the app and click on any exploit.
[FONT="]Congratulations!! Your device is now rooted[/FONT] :victory:
::::::::::: METHOD 2 :::::::::::
NOTE: MAKE SURE YOU HAVE INSTALLED USB DRIVERS AND ANDROID ADB FIRST OTHERWISE THIS METHOD WON’T WORK. IF YOU HAVEN’T INSTALLED ANY DRIVERS PLEASE REFER TO THE STARTING OF THE THREAD..
Tools required:
1. MTKDroid Tools (http://www.mediafire.com/download/6z9acf5um65cuj2/MtkDroidTools+v2.5.3.zip)
2. Busybox (https://play.google.com/store/apps/details?id=stericson.busybox&hl=en)
Method:
1. Download MTKDroid Tools and extract it to the desired location.Click on MTKDroid Tools.exe and extract it to desired location.
2. Download Busybox on the tab via Google Playstore
3. Connect your tablet via USB and and make sure USB debugging is enabled.
4. Open MTKDroid Tools..The tool will recognize your device..If the color indicator in the bottom left corner is green, you already have root shell, and can go on to the next step, if it is yellow, click on the root button at the bottom, and wait for the progress bar, if the indicator stays yellow, or you get an error message, this probably means you do not have Busybox installed, you can install it from the Google play store. When the indicator turns to green you have root shell.
_____________________________________________________________________________________________________
3) BACKING UP ROM AND MAKING IT FLASHABLE VIA SPFLASH TOOLS:-
Note: Backup will only work if you have root on your device
Tools required:
1.MTKDroid Tools
Method:
1. Download and open MTKDroid Tools.
2. Next click on the tab 'root,backup,recovery' and click on "backup"
[FONT="]3. The process will now start. It may take at least 30 minutes to 1 hour depending on how many apps are installed on your phone. During the backup process you may see a pop-up asking if you want to make a compressed file for the backup. You can choose not to create the compressed file by clicking on “No”. It will same time but I recommend clicking on “Yes”.
[/FONT]
4.Once the backup has been completed check out the folder that contains your MTK Droid Tools application and you will see a folder named “backups”. The folder will contain all the images that you can use to flash using SP Flash tool and a zip file which is just a compressed files of the backup created by the droid tool. You can also see on your phone that there is a new folder named clockwordmod inside that there will also be a images that you can use to backup your rom using Clockworkmod (CWM).
5. Now to make this backup flashable through Sp Flash tools click on root,backup,recovery tab and click on To prepare blocks for Flash Tool
6. A new window will appear asking for .md5 file...For this navigate to MTKdroid Tools folder and then backups folder...Open the backup you have created earlier and select the files.md5 and click open.
7. Wait for the MTK Droid tools to copy the files for Sp Flash tools.. When the tool completes its job there will be a message "copying is complete"... Now you have a flashable backup of the rom...
______________________________________________________________________________________________________
4) Installing CWMR (ClockWorkMod Recovery) Using MTKdroid Tools:
NOTE: Your phone must be rooted before installing ClockWorkMod Recovery (CWMR)
Tools required:
1. MTKDroid Tools
Method:
1. Open MTKdroid Tools and click on tab [FONT="]'root,backup,recovery' and select 'to use boot from phone'
2. Then click on 'recovery and boot' and shortly after a dialogue box will appear asking if you want to 'make cwm recovery automatically' click yes [/FONT]
3. The tool will then create the recovery and another dialogue box will appear asking to 'install created recovery to phone', click yes and finally the tool will ask to reboot into recovery mode, click yes and the device will reboot into CWM recovery so you can check the installation was successful.
_____________________________________________________________________________________________________
5) FLASHING A ROM:-
NOTE : PLEASE DON’T FLASH ROMS WHICH ARE NOT COMPATIBLE WITH YOUR DEVICE AS IT CAN BRICK YOUR DEVICE.
Tools required:
1. SP Flash Tools (http://d-h.st/w6v or http://www.mediafire.com/download/aix6jxmcbxmmc2b/SP+Flash+Tool+3.1352.01+(5.1352.01).rar.html)
Method:
1. Download and open SP Flash tools.
2. Then click Scatter-loading button to load the correct scatter file. Select The scatter file which you have made using SpFlash Tools..If you are unable to find the scatter file for your tab head over to MTKdroid Tools folder --> backups.. Click on the backup folder (Folder name will be like Freedom_...._backup_.... Instead of dots there will be date/year)
3. Now click on “ !Files_to_FlashTool ” folder.. There will be a text file named as “ MT6589_Android_scatter_emmc.txt ” click on that text file and click open..
4. Now switch off your tab and disconnect it from your pc.
5. Press F9 (or hit Download button) and then connect your phone/tab into the computer via USB data cable and switch on the tab..After connecting the tab press VOL DOWN and VOL UP key.. The process will start and a red progress bar will appear.
6. After the red progress bar is complete, there will appear a purple progress bar.
7. After purple, yellow bar will appear. When the yellow bar is complete, you'll get a popup with a green circle , which means that the flashing process has been successful.
8. You can now safely disconnect your phone and turn it on.
__________________________________________________________________________________________
6) Flashable Rom Dump/Backup
NOTE: I will not take any responsibility if something goes wrong while flashing this ROM.... I have personally flashed it on my device and it works...PLEASE BEFORE FLASHING READ "FLASHING THE ROM" SECTION OF THIS THREAD or refer to the original SP flash tools guide.. _______________________________________________________________________
THIS ROM IS PRE-ROOTED AND CWM FLASHED...Here is the
LINK: https://drive.google.com/file/d/0B7ujzTEVERI_X1JOemxkZUt2X00/view?usp=sharing
______________________________________________________________
Method:
1) Please see the Flashing a ROM section of this thread and make sure you have adb and other drivers installed.. ___________________________________________________________________
7) Stock Recovery
Here is the stock recovery of the device (credit goes to my friend @Ips666) :
https://drive.google.com/file/d/0B7ujzTEVERI_ZElnY093bkxKaFU/view?usp=sharing
________________________________________________________________________________
***Root with SPFT Flash Tool Method***
for iBerry Auxus Note 5.5 / Mlais Note Pro 5.5 / Elephone P2000
[EASY ROOT METHOD]
Guys. Now we have our own first Root Method for AUXUS NOTE 5.5 STOCK ROM.
Finally this root perfect root method was possible due to SPFT version of Stock Rom
Installation Instructions
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. This also breaches warranty of your phone. I am not responsible for any damages.
1) Download flashable zip file named UPDATE-SuperSU-v2.02.zip and save in root of your SDCard
2) Download and install Phone Driver / Universal Android USB Drivers (if any).
3) Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Reboot Recommended at this point. DO NOT CONNECT YOUR PHONE RIGHT NOW.
3) Download and extract following TWRP Recovery Flash Package as per your model on desktop or anywhere on your pc.
------- Download for iBerry Auxus Note 5.5 (Download New Recovery image file by me from this thread)
------- Download for Mlais Note Pro
------- Download for Elephone P2000
4) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
5) Keep only TWO options checked (selected) as shown in following image (Preloader and Recovery). If options are not seen then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted folder. Now be sure only two options (PRELOADER and RECOVERY) selected as mentioned in following image. Unselect all other options.
Now PRESS "Download" button at top.
6) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
7) Now close program on pc and remove cable, Insert Battery and start phone in RECOVERY mode.
To start phone in recovery mode press "VOLUME UP" button and "POWER" until phone starts in TWRP Recovery mode.
8) Important: Now install/flash "UPDATE-SuperSU-v2.02.zip" in Recovery mode and Reboot phone in system (normal) mode
Done. Enjoy Press thanks if you liked my work.
IMPORTANT: The package also contains original Stock Recovery named recovery_org_stock.img. If you want to flash back to original company stock recovery, then select this file in flashing tool (Click recovery line and select this file) and then flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks
Yeah rooted my auxus note with your guidance. Good to see that you have also shifted to iberry auxus from canvas hd. So, double excitement for me one is new phone and other is to see cmahendra with this phone. So many exciting custom rom waits for note 5.5. Thank you Sir.
baskye said:
Yeah rooted my auxus note with your guidance. Good to see that you have also shifted to iberry auxus from canvas hd. So, double excitement for me one is new phone and other is to see cmahendra with this phone. So many exciting custom rom waits for note 5.5. Thank you Sir.
Click to expand...
Click to collapse
I am glad to see first person who rooted with the help of my tutorial and files. That also confirms the steps are perfect. Actually worked for me so should work for all. Thanks a lot for your faith and trust in me. Will be around for more developement and roms.
Success!
]I have rooted by iberry-auxus note 5.5 as per your guidance.
But the USB DRIVER not correctly installed.
I have updated the driver through device manager
My operating system is windows 7 ultimate x64
Everything went smooth as you instructed
Thank you for developing this guide to root the model.
:victory:
The USB DRIVERS can be downloaded from
http://forum.xda-developers.com/showthread.php?t=2180436
Using the note for about 2weeks. Rooted successfully. Titanium backup is not working properly. Any solution for it.
Also the network refresh is poor. So network switching is very slow and many times have to manually do refresh or reboot.
latest twrp recovery
while browsing through elephone p2000 thread I came across this link which gives the latest twrp recovery
http://n2k1.com/n2k1/ELEPHONE_P2000/
Downloaded the 8.77 MB file flashed the recovery file alone through sp flash tools
Working fine on our auxus 5.5 note.
flashing the preloader is not necessary though is it?
Yes it is not necessary
hi mahendra .this is great .didn't expect rom development on fast track so soon .
going to root my brothers mobile with this method now but want to make sure if phone will receive updates normally after that.
thanks.:good:
mojahun said:
]I have rooted by iberry-auxus note 5.5 as per your guidance.
But the USB DRIVER not correctly installed.
I have updated the driver through device manager
My operating system is windows 7 ultimate x64
Everything went smooth as you instructed
Thank you for developing this guide to root the model.
:victory:
The USB DRIVERS can be downloaded from
http://forum.xda-developers.com/showthread.php?t=2180436
Click to expand...
Click to collapse
I am not sure if above USB driver is useful or not. But when you connect MT6592 Phone to PC without Battery, the PC shows a box with
"Searching drivers for YunOS system"
and if Internet is connected , it will download a tiny driver automatically from Microsoft site for Chinese Mobile Phones and an entry in Device Manager appears like
"YunOS ACB Interface"
Now Flashing Tool will automatically connect your phone to pc on next available COM PORT (COM3 or COM4 etc.)
So it is not USB Driver. It needs YunOS ACB Driver. You can find it separately somewhere on net, if searched.
baskye said:
while browsing through elephone p2000 thread I came across this link which gives the latest twrp recovery
http://n2k1.com/n2k1/ELEPHONE_P2000/
Downloaded the 8.77 MB file flashed the recovery file alone through sp flash tools
Working fine on our auxus 5.5 note.
Click to expand...
Click to collapse
Download my version of TWRP 2.7.1.0, which is tested and works perfect, includes Mount USB Storage and you can transfer files in Recovery mode.
Ito_ said:
flashing the preloader is not necessary though is it?
Click to expand...
Click to collapse
No, Preloader is not necessary but in case it is wiped or corrupted, its good to flash the original provided by company makers. I have included all Preloaders directly from respective company stock roms
sandeep101 said:
hi mahendra .this is great .didn't expect rom development on fast track so soon .
going to root my brothers mobile with this method now but want to make sure if phone will receive updates normally after that.
thanks.:good:
Click to expand...
Click to collapse
YEAH! I am always around in XDA, for the phone in my hand Thanks for appreciation
SCATTER file and Recovery for two more clone models.
Hi A L L!!!
Posted SCATTER file and Recovery for two more clone models.
3) Download and extract following TWRP Recovery Flash Package as per your model on desktop or anywhere on your pc.
------- Download for iBerry Auxus Note 5.5
------- Download for Mlais Note Pro
------- Download for Elephone P2000
Choose wisely.
Nothing happening
cmahendra said:
***Root with SPFT Flash Tool Method***
for iBerry Auxus Note 5.5 / Mlais Note Pro 5.5 / Elephone P2000
[EASY ROOT METHOD]
Guys. Now we have our own first Root Method for AUXUS NOTE 5.5 STOCK ROM.
Finally this root perfect root method was possible due to SPFT version of Stock Rom
Installation Instructions
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. This also breaches warranty of your phone. I am not responsible for any damages.
1) Download flashable zip file named UPDATE-SuperSU-v2.02.zip and save in root of your SDCard
2) Download and install Phone Driver / Universal Android USB Drivers (if any).
3) Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Reboot Recommended at this point. DO NOT CONNECT YOUR PHONE RIGHT NOW.
3) Download and extract following TWRP Recovery Flash Package as per your model on desktop or anywhere on your pc.
------- Download for iBerry Auxus Note 5.5
------- Download for Mlais Note Pro
------- Download for Elephone P2000
4) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
5) Keep only TWO options checked (selected) as shown in following image (Preloader and Recovery). If options are not seen then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted folder. Now be sure only two options (PRELOADER and RECOVERY) selected as mentioned in following image. Unselect all other options.
Now PRESS "Download" button at top.
6) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
7) Now close program on pc and remove cable, Insert Battery and start phone in RECOVERY mode.
To start phone in recovery mode press "VOLUME UP" button and "POWER" until phone starts in TWRP Recovery mode.
8) Important: Now install/flash "UPDATE-SuperSU-v2.02.zip" in Recovery mode and Reboot phone in system (normal) mode
Done. Enjoy Press thanks if you liked my work.
IMPORTANT: The package also contains original Stock Recovery named recovery_org_stock.img. If you want to flash back to original company stock recovery, then select this file in flashing tool (Click recovery line and select this file) and then flash.
Click to expand...
Click to collapse
I followed all your steps but it's not working. When I press download button it's not flashing. I waited for over an hour.
Techminator said:
I followed all your steps but it's not working. When I press download button it's not flashing. I waited for over an hour.
Click to expand...
Click to collapse
Seems drivers are not properly installed. These are new drivers by iBerry.
1) Uninstall any android driver you installed before from ControlPanel/Programs. Reboot/Restart PC/Laptop
2) Install this USB Preloader Driver http://d-h.st/kcH (from iBerry)
3) Then Install this SPFlashtool Driver http://d-h.st/vRd (from iBerry)
4) Reboot PC/Laptop/Computer , Keep pc connected to Internet on all the time. DO NOT yet connect phone to pc.
5) After computer restarts Run SPFT "flash_tool.exe" and press DOWNLOAD button
6) Now connect phone (without battery) to pc. Let windows install drivers, then flashing will start in less than 5 min. Dont wait for hours.
Hope this helps and inform if works.
PS: For GOD's sake do not quote whole opening post in your queries. Do you want me to read my own thread? Hope you have read XDA basic terms and conditions.
Rooted!
cmahendra said:
Seems drivers are not properly installed. These are new drivers by iBerry.
Click to expand...
Click to collapse
Thank You, I managed to root my phone with your help Mahendra. Also, my apologies for quoting the whole post. I suppose it needs editing including driver links. I also removed SIM card from the phone before rooting.
Rooting apart, I wanted to ask if there are any advantages/differences by installing your ROM? Can I not create a ROM by taking a complete image of my current phone's state? I was thinking about Xposed Framework. Not sure but your advice would really help.
Finally, I was wondering if there are any good flip cases available online. The local stores do not have any for this brand and model as it's fairly new in the market. The one from iBerry is Rs 990 which I think is unreasonable. Any suggestions would be much appreciated.
Also, is there a way to light up the soft buttons?
Thank You and keep up the good work.
Is there any chance of there being a cm11 port on this phone?
I don't like the icon size on the stock ROM and Titanium Backup doesn't work
Techminator said:
Thank You, I managed to root my phone with your help Mahendra. Also, my apologies for quoting the whole post. I suppose it needs editing including driver links. I also removed SIM card from the phone before rooting.
Rooting apart, I wanted to ask if there are any advantages/differences by installing your ROM? Can I not create a ROM by taking a complete image of my current phone's state? I was thinking about Xposed Framework. Not sure but your advice would really help.
Finally, I was wondering if there are any good flip cases available online. The local stores do not have any for this brand and model as it's fairly new in the market. The one from iBerry is Rs 990 which I think is unreasonable. Any suggestions would be much appreciated.
Also, is there a way to light up the soft buttons?
Thank You and keep up the good work.
Click to expand...
Click to collapse
I dont use or recommend Xposed FW. You can use as per your requirement. Works fine.
This is rooting tutorial. I will be happy if you stick to the rooting related questions in this thread from next time. A little XDA terms and conditions page will help a bit to you and us.
Yes, flip cover by iBerry is costly and even I am also looking for low-cost option.
falcon.prj said:
Is there any chance of there being a cm11 port on this phone?
I don't like the icon size on the stock ROM and Titanium Backup doesn't work
Click to expand...
Click to collapse
For icons size to change use any other launcher, like google now or nova or any other you want.
Move Titanium App to internal memory or install Link2SD, check settings and then install Titanium Backup. plz google for more info on titanium.
This is rooting tutorial. I will be happy if you stick to the rooting related questions in this thread from next time. A little XDA terms and conditions page will help a bit to you and us.
For titanium backup issues try super user app by Koushik Dutta (flashable zip file link is available in play store). First uninstall super su from the application itself. Then install super user through recovery. Ignore the warning regarding su binary.
---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------
It worked for me. Just take a nandroid backup of your current rom before giving a try.
baskye said:
For titanium backup issues try super user app by Koushik Dutta (flashable zip file link is available in play store). First uninstall super su from the application itself. Then install super user through recovery. Ignore the warning regarding su binary.
---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------
It worked for me. Just take a nandroid backup of your current rom before giving a try.
Click to expand...
Click to collapse
Thanks a lot for this good tip/method. +1 plz post link to exact file/version.
Here is the download link
http://download.clockworkmod.com/superuser/superuser.zip
Does not work
This method does not work after I download and flash with the latest firmware (13 Oct 2014) from iBerry site.
While trying some mods for Unite 2 , my phone got bricked, i must have done something wrong because those mods are working for others. so it was completely my mistake. so i spent my last 4 hours trying to find a solution and this is how i finally got it work.
JUST WANT TO REMIND YOU THAT TRY THIS GUIDE ON YOUR ON RISK, IM NOT GIVING YOU ANY GUARANTEE THAT IT WILL GOING UNBRICK YOUR DEVICE, IM JUST SHARING THE METHOD WHICH WORKED FOR ME
MY DEVICE
MICROMAX UNITE 2 4GB
KITKAT 4.4.2
following was the symptoms of my device only try this guide if yours are identical to mine
Phone was not booting up (nothing was happening no matter how long i press power button)
wasn't booting into to recovery mode also notification led was not turning on when plugged to PC (i.e No charging)
windows was making device plugged and unplugged sound over and over again when i was connecting it to pc using data cable
now from the 3rd point i figured out that my phone was being detected by my pc but only for a brief moment
so after searching for a while i found out that it was a problem with the PRELOADER and device was trying load META mode(donAt have any clue what that is) so i needed to Install MTK65XX Preloader USB Vcom Drivers for SP Flash Tools.
this is how i did it
Step 1 :Firstly Download MTK USB VCOM Drivers from here
DOWNLOAD
the extract it
Step 2 : Now open Device Manager in your PC by right clicking on My Computer and then click on Manage.
Step 3 :Next go to Device Manager in that and click on your PC name and then click on Add legacy hardware, see below
Step 4 : Now in Add Hardware Wizard click on Next >> Install the Hardware that i manually select from a list (Advanced) >> Show All Devices >> Next >>Have a Disk >> Browse, Now select the inf file according to your OS and from where you extracted the downloaded drivers.
Step 5 : Now click on Next on the wizard to install the drivers and when promoted for security issue just click on install any anyway to finish the driver installation.
Step 6 : After installation finish restart your PC.
Source
now remove battery of your phone and then plug it to your pc using data cable While Holding Volume up button
the windows will recognize it and install drivers, now open device manager and if you find a device under Ports(Com&LPT) which has Mediatek, MTK, USB, VCOM,PRELOADER keywords in it then you are good to go
now download SP Flash Tool
Devhost l Mediafire
and Factory rom
Download
and then extract the Factory rom archive
Then flash Stock ROM by following these steps:
Step 1: Open SP flash tool and load the Scatter file of Stock ROM it is inside the extracted factory rom folder
Step 2: Select Format all+Download in drop-down menu.
Step 3:Remove the battery of your phone.
Step 4:Click Download in SP Flash Tool.
Step 5:connect your phone to pc via USB cable while holding volume up button you can release volume button when the process is stared . Wait for flashing to complete .
Step 6: when the process is completed unplug the phone, insert the battery and then turn it one hopefully it should boot now and you should see Micromax logo just remember first boot take long time so just wait for it to completely boot
if this doesn't work then don't loose hope keep on searching for other ways ,
Nice one.... Will be helpful for some
Hello.I had my phone updated from 4.2 to 4.3 a few days ago and after updating itself in recovery,it simply died.No charging,no battery pull reset,just plain dead.I connected it to my laptop and it recognised it as QHSUSB_DLOAD.After googling around i found that only a JTAG will save it.Well,that ain´t true.I will give you a tutorial that will fix your phone in a few minutes.
First of all,i did it on Windows 8.1 x64.
Prerequisites :
QDLoader HS USB Driver : x64 driver or x32 driver
I9505 Pit file : Pit file download
Boot repair tool : I9505 Boot repair tool
Needed files to enter download mode to flash a stock rom : Files for Download Mode
Stock ROM to flash.I used this one but IT IS FOR THE LTE VERSION. Please download the stock rom for the Non - LTE version if you have it.
And lastly,Odin : Download here
Step 1.
Make sure that your device is connected and in Device Manager , it show as QHSUSB_DLOAD .If it does,disconnect it from your computer.
Before installing the drivers,we need to disable driver signature enforcement.
First,press WinKey + C and choose Settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
or if you prefer the modern one in Windows 8.1 or Windows 10,choose Change PC Settings
Choose Update & recovery
Click Recovery
Then,at Advanced Startup,click Restart now.
Your PC will restart.
Click Troubleshoot
Advanced Options
Startup Settings
Once entered here,it will ask for us to restart.Click Restart
When at the list,press F7 to disable Driver signature enforcement and boot.
Step 2.
Install the 64 bit or 32 bit driver depending on your OS WITH YOUR DEVICE DISCONNECTED.
Now plug your device to your computer via USB and it should pop up in Device Manager as Qualcomm HS-USB QDLoader 9008
Next,go to Control Panel,choose Folder Options and check Show hidden files.
Make a new folder on your desktop and put the galaxy_S4_9505 boot repair QHUSB in that folder and nothing else.
Now extract the needed files for Download Mode in another folder and leave it open and the folder you have galaxy_S4_9505 boot repair QHUSB open aswell.
Open galaxy_S4_9505 boot repair QHUSB and do not click Recover Device until you read the next step.
Step 3.
This is the most important step because we will flash the stock boot files for our device.
With galaxy_S4_9505 boot repair QHUSB open and the two folders above open, select all the files in the needed files for Download Mode folder and be ready because when you click Recover device,you will need to drag those files in the folder where galaxy_S4_9505 boot repair QHUSB is and you have to be very fast when doing it.
Click Recover Device and drag the files in the folder mentioned above and click overwrite very fast.This should be done in 3 seconds max. and if it won´t work,repeat the last step until you do it right.
Your phone should now boot in Download Mode.
Step 4.
Download Odin and click on AP and select the .tar file and wait a few minutes.
Click on Options and check Auto Reboot , Re-Partition and F. Reset Time. Make sure that these are the only checked options.
Now go to Pit tab and select the downloaded pit file.
Click start and wait for it to finish.
That is it.
Final note :
If your device is restarting and it does not boots in Download mode and shows up that the battery is charging,disconnect it and pull the baterry and the press Vol. down , Home button and Power to enter Download mode.If you do not flash a stock ROM with Odin,after your first restart,it will become hardbricked again.
Don´t forget to hit that thanks button if it helped you.
Goodluck.
i can dbrick s4mini gt-i9195 please help
It will work with my Galaxy S4 Active (SHV-E470s)?
Can you force the QHSUSB_DLOAD
Help !!!
After trying the procedure, I did not timely drag the files !!! Now it turns green all the green screen, but when I connect it to the pc no holes detected no door !!! Can you force the QHSUSB_DLOAD or Qualcomm HS-USB QDLoader 9008 ???? Sorry my bad english !!!
It is also possible for s4 mini i9195 ????
Thank you so much ,it worked for me on Windows 7. Galaxy s4 I9505.
thank you soooooooooooooooooooooooo much.!?
video please please
After trying this method . Don't u suffer from any display problem ? I tried this and it worked for me but i have now display problem . it's a little yellow and it appears always download mode .
Can I backup my phone when in download mode?
i got status 29 error: system could not write the files to specified device please help
Can this be made for a i9195 model???
kent8hd said:
Hello.I had my phone updated from 4.2 to 4.3 a few days ago and after updating itself in recovery,it simply died.No charging,no battery pull reset,just plain dead.I connected it to my laptop and it recognised it as QHSUSB_DLOAD.After googling around i found that only a JTAG will save it.Well,that ain´t true.I will give you a tutorial that will fix your phone in a few minutes.
First of all,i did it on Windows 8.1 x64.
Prerequisites :
QDLoader HS USB Driver : x64 driver or x32 driver
I9505 Pit file : Pit file download
Boot repair tool : I9505 Boot repair tool
Needed files to enter download mode to flash a stock rom : Files for Download Mode
Stock ROM to flash.I used this one but IT IS FOR THE LTE VERSION. Please download the stock rom for the Non - LTE version if you have it.
And lastly,Odin : Download here
Step 1.
Make sure that your device is connected and in Device Manager , it show as QHSUSB_DLOAD .If it does,disconnect it from your computer.
Before installing the drivers,we need to disable driver signature enforcement.
First,press WinKey + C and choose Settings
or if you prefer the modern one in Windows 8.1 or Windows 10,choose Change PC Settings
Choose Update & recovery
Click Recovery
Then,at Advanced Startup,click Restart now.
Your PC will restart.
Click Troubleshoot
Advanced Options
Startup Settings
Once entered here,it will ask for us to restart.Click Restart
When at the list,press F7 to disable Driver signature enforcement and boot.
Step 2.
Install the 64 bit or 32 bit driver depending on your OS WITH YOUR DEVICE DISCONNECTED.
Now plug your device to your computer via USB and it should pop up in Device Manager as Qualcomm HS-USB QDLoader 9008
Next,go to Control Panel,choose Folder Options and check Show hidden files.
Make a new folder on your desktop and put the galaxy_S4_9505 boot repair QHUSB in that folder and nothing else.
Now extract the needed files for Download Mode in another folder and leave it open and the folder you have galaxy_S4_9505 boot repair QHUSB open aswell.
Open galaxy_S4_9505 boot repair QHUSB and do not click Recover Device until you read the next step.
Step 3.
This is the most important step because we will flash the stock boot files for our device.
With galaxy_S4_9505 boot repair QHUSB open and the two folders above open, select all the files in the needed files for Download Mode folder and be ready because when you click Recover device,you will need to drag those files in the folder where galaxy_S4_9505 boot repair QHUSB is and you have to be very fast when doing it.
Click Recover Device and drag the files in the folder mentioned above and click overwrite very fast.This should be done in 3 seconds max. and if it won´t work,repeat the last step until you do it right.
Your phone should now boot in Download Mode.
Step 4.
Download Odin and click on AP and select the .tar file and wait a few minutes.
Click on Options and check Auto Reboot , Re-Partition and F. Reset Time. Make sure that these are the only checked options.
Now go to Pit tab and select the downloaded pit file.
Click start and wait for it to finish.
That is it.
Final note :
If your device is restarting and it does not boots in Download mode and shows up that the battery is charging,disconnect it and pull the baterry and the press Vol. down , Home button and Power to enter Download mode.If you do not flash a stock ROM with Odin,after your first restart,it will become hardbricked again.
Don´t forget to hit that thanks button if it helped you.
Goodluck.
Click to expand...
Click to collapse
Plz help me i am using this tutorial to fix my p5100 device but it shows permission denied . Other then samsung note 4 repair tool , I got appropriate things for my device. Plz help
Thank you a lot! It worked!
It took me a bit of time, this is my extra info for others:
- When doing the step 3, a command window with scrolling text will appear with 2 lines. You must do the copy paste thing BEFORE the text starts rolling as that indicates it started using those files. If no window with text opens, try again
- With odin I had 2 problems: One, that it was failing to do the copying, the reason was that I was using a wrong ROM. Second was that a ROM was written, but it was the incorrect one so I had to start again from step 0.
So try a different ROM.
I read the cable may be a problem too, but it wasn't in my case.
In between retries and after succeeding, removing the usb cable AND the battery may help.