Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Technical Specs
[*]Google it before posting here.
[*]Please post any guides and/or tutorials directly onto the forum, rather than links, otherwise this thread will be closed by the Moderator.
Click to expand...
Click to collapse
Rooting for 8GB Version
Procedure:
1. Download the Framaroot application and transfer it to SD card
2. Now go to Settings>Security and put check mark on Unknown Soruces
3. Now use file manager and browse to the location where you have placed Framaroot Application
4. Install it and open it. Now Select "Install SuperSU" and hit Boromir.
5. Now go to Play Store and search for Super User and install it after opening it might ask to update SU.bin, hit yes and then "Normal"
6. Reboot your Device.
[ROMs]
Please do not flash the firmware that is not meant for your phone. Flash only 4gb to 4gb and 8Gb to 8Gb
Auxus Nuclea N1 Stock Firmware
NEW
Final Version - 11-Dec-2013 - [Flash with SPFlash Tools]
Click to expand...
Click to collapse
OLD ROMs
Firmware Update (Intermediate V1) 18-Nov-/2013 [Flash with spflash Tools]
NucleaN1_FirmwareUpdate_V1_CWM.zip
Click Here - - [09/Sep/2013] [Flash with SPFlash Tools]
CWM Zip Download from herehttp://d-h.st/b3r
8GB version -
Click Here - [Flash with SPFlash Tools]
Custom ROMs
Click HERE
How to Flash Stock ROM using SP Flash Tools?
1) Unzip the ROM folder
2) Install the drivers and open SP Flash Tools..
Check the below post with images, if you are not sure whether drivers are installed or not.
If you face this problem, then try Firmware upgrade and connect the phone..
You can now safely disconnect your phone and turn it on. The process ends here.
FLASHING PATCH using SP Flash Tool(Single Files)
1)Select Android Scatter File .txt ....
2)Uncheck all files from the below box....
3)Select the correct file you want Flash by clicking it....
4)Click Download button on SP tool.... **"Dont click Firmware Upgrade"
5)A box asks to confirm it...Click Yes...
6)Connect Phone without the battery...
7)It will get Flashed...[/COLOR]
[Recovery]
1) Nuclea N1 Stock Recovery Click Here
2) TWRP Recovery- Click HereThanks to Kumar abhishek
3) CWMRecovery 6.0.3.3 Click Here or Click Here Thanks to C3C076
Procedure to Flash Recovery.
1) Download Mobile uncle tools from play store
2) Place the downloaded recovery.img in your sdcard
3) Open Mobile uncle tools
4) Select 'update recovery' and Click on the recovery.img
5) Reboot
adb method: For advance users:
---------------------------------------------------
Make sure you have all the drivers for your phone installed on your computer.
Make sure you have USB Debugging enabled, Install from Unknown Sources is enabled and device is detected in ADB run this command:
Code:
adb devices
Download the CWM Recovery
Press SHIFT key + Right mouse click in the folder where the file is located and select Open Command from Here.
Now, in the command prompt do the following:
a. Reboot into Bootloader mode. Use command:
Code:
adb reboot bootloader
b. Device will reboot and display logo. (check if device is in bootloader mode by running command:
Code:
fastboot devices
. If you see a device connected then you have successfully rebooted into fastboot mode.
c. Now, run this command:
Code:
fastboot flash recovery recovery.img
(This will flash the CWM recovery image to the device).
d. Once successful, reboot the device using this command:
Code:
fastboot reboot
.
How to Backup ur complete ROM
1. In CWM Recovery mode, select Backup and Restore
2. Select Backup
3. Wait till it finishes (May take upto 10 minutes)
How to restore ur backed up ROM from SD card
1. Go to CWM Recovery, select backup and restore
2. Select Restore
3. select the folder in date format (Folder name indicates the time and date when ur backup was created}
4. Wait till it finishes (May take upto 10-15 minutes)
Special Guides for Newbies to get Started
Everything you need to know about Clockworkmod Recovery
How to setup ADB and Fastboot properly
5 Things Every Android user should do
24 Apps Every Android User Must Install
5 Things to know before performing any Android tweak
Thanks to Driodiser
HIT THANKS PLEASE BECAUSE IT WONT COST ANY :angel:
Extend your storage on Nuclea N1
[Extend your storage on Nuclea N1] - Thanks to @kailashnj
Follow the instructions in the post HERE
How to enter into Recovery - Nuclea N1 :-
Code:
[LIST=1]
[*]Turn OFF your phone.
[*]Press & hold Vol(+) button and Power button for 12 seconds.
[B]Stock Recovery[/B]
[*]You will see a laid-down Android symbol with 'No command' message below it. Press the power button once.
[*]You will enter into menu 'Android System Recovery'
[*]Press Vol(-) to roll over options.
[*]Press Vol(+) button to select.
[*]DONE!
[/LIST]
Another options if you are facing trouble going to recovery:
Code:
1. Install Mobile Uncle tool
2. Reboot recovery.
MTK6589 Drivers
Universal Pdanet drivers Click Here
Follow this guide Here
Tools
MTK Android PC Sync Tool V2.1233.1 Click Here
SN_Write_tool_exe_v2.1132.0.rar - 8.27 MB
Guide Here
Driver_Auto_Installer_v1.1236.00 Click here
Meta-Mode is very useful if device fails to get detected by PC under normal Conditions.....To make device fall to Meta-Mode,just do these :
1) Start SP Tool on PC..
2) Now run SP Tool with "Firmware Upgrade/Download"
3) Switch OFF Phone..
4) Remove Battery..
5) Connect mobile to PC while holding Volume + button [WITHOUT BATTERY]..
6) Flashing will be started
7) Hold the button till flashing completes...
After 100% Flash,Release Button..
9) Insert Battery..
10) Start Device.
Click to expand...
Click to collapse
How to dump stock recovery image using SP Flash Tool
1) Download and install USB VCOM Driver
2) Download, extract and launch SP Flash Tool
3) Use "Scatter-loading" button to load attached scatter file: MT6589_Android_scatter_emmc.txt
4) Download stock recovery image and place inside the ROM folder. Then select only RECOVERY.
5) Turn off your phone. Make sure USB cable is unplugged. Wait until vibrator indicates it's turned off
6) Click Download button in SP Flash tool, confirm warning complaining about not all files being selected
7) Connect your phone and wait for the flash process to finish (indicated by window with green circle)
8) Unplug USB cable. Hold down Volume+ while turning your phone on to boot into recovery
Click to expand...
Click to collapse
Backing up your IMEI
Different Methods are available for this.
1) Use any RootExplorer to copy file /data/nvram/md/NVRAM/NVD_IMEI/MPOB_001 to your external SD card. (or if that folder does not exists, try /nvram/md/NVRAM/NVD_IMEI/MPOB_001). It is good to backup the entire folder /data/nvram/md/NVRAM.
2) Back up using Mobile Uncle utility. Click on Mobileuncle Tools --> Click IMEI Backup Restore (MTK) --> Backup/Restore
Restore your IMEI
Code:
1- Open Mobile Uncle Tools.
2- Goto Engineer Mode
3- Select Engineer mode[MTK]
4- Under Connectivity Tab go to CDS information
5- Select Radio Information
6- Select Phone1 (for the first imei)
7- at the top there is a command line which begins “AT+” just type there “AT +EGMR=1,7,”IMEI_1? (instead of IMEI_1 put your first imei number)
8- hit send command
9- You will / may get a confirmation that "sent to mSend".
10-Now come back and select “Phone2?
11-at the top there is a command line which begins “AT+” just type there “AT +EGMR=1,10,”IMEI_2? (instead of IMEI_2 put your second imei number)
12-Then just reboot the phone.
13- Dial ” *#06#” to Check Imei.
Factory ROM Backup for MT65xx via MTK Droid Root & Tools For BackUp & Unbrick
It's tested and working...
How to install ADB USB driver in window 7
use this method also in window xp,if any driver not install
Google USB Driver Rev 7 ( ADB driver )
inside three dll file driver
1-WdfCoInstaller01009.dll
2-winusbcoinstaller2.dll
3-WUDFUpdate_01009.dll
link
Click Here
Before use it is necessary to check that:
adb drivers are installed. Check device manager--> unknown devices. ADB Drivers attached.
Now the Tool
Credits: umesh gaba
[MOD][4.1 4.2] Extend Phone Storage 1.5, 2.5GB A116 (Other MT6589 Devices on request)
[Solution] NVRAM WARNING: Err = 0x10
Download this zip Click Here
Prerequisites:
You have to backup IMEI of your phone (both sim slot).
Step 1 - Extract the WiFi Fix files and place them in a folder on your memory card
Step 2 - Open Root Explorer
Step 3 - Click on Mount R/W
Step 4 - Click on data
Step 5 - Scroll down to the folder named nvram
Step 6 - Open APCFG folder
Step 7 - Open APRDEB folder
Step 8 - Delete the WIFI and WIFI_CUSTOM files
Step 9 - Now copy/move the files on your sdcard to data/nvram/APCFG/APRDEB and Paste
Step 10 - After pasting both the files, close Root Explorer and REBOOT your phone.
Here is another method Click Here
The bad news is.
Vijay have u bot the mobile..
Sent from my AUXUS Nuclea N1 using xda app-developers app
can you provide a review of the phone?
akashavel said:
Vijay have u bot the mobile..
Sent from my AUXUS Nuclea N1 using xda app-developers app
Click to expand...
Click to collapse
Hello dude,
i have booked this phone, and i am seriously waiting for some reviews.
It would be great if there was a video review done by you on you tube or where ever you are comfy.
The specs are awesome but there are some negative opinions as well.
This would help.
Thanks
akashavel said:
Vijay have u bot the mobile..
Sent from my AUXUS Nuclea N1 using xda app-developers app
Click to expand...
Click to collapse
Yes, I am in batch II.
dhavalg said:
Hello dude,
i have booked this phone, and i am seriously waiting for some reviews.
It would be great if there was a video review done by you on you tube or where ever you are comfy.
The specs are awesome but there are some negative opinions as well.
This would help.
Thanks
Click to expand...
Click to collapse
videos posted by me..
https://www.youtube.com/user/akashavel/videos
also chk this fb page
https://www.facebook.com/groups/Ibe...39765010250/?ref=notif¬if_t=group_activity
Hi Guys,
Even I have bought this phone and awaiting delivery, I was promised by 4th Aug. Lets see. The specs of this phone seems to be great other than the 4GB storage. I hope that apps2sd works really fine and I am able to store all my game data on the SD card. Wanted to know more info of this phone and the rom.
Regards,
Kailash
can't decide what to buy
is the costumer service good...i am really thinking to buy this phone but this brand was never heard before by me.....
in ur opinion which phone would be better
1. canvas 4 (micromax)
2. auxus nuclea n1 (iberry)
3. Xolo play (XOLO)
Thanks...
akashavel said:
videos posted by me..
https://www.youtube.com/user/akashavel/videos
also chk this fb page
https://www.facebook.com/groups/Ibe...39765010250/?ref=notif¬if_t=group_activity
Click to expand...
Click to collapse
That was really helpful, but i hoped some words about the phone from your mouth as well.
Need some comparison too,
But any ways it was awesome....I am going to continue with my order, actually i was planning on cancelling it. But now not...
Thanks for the videos.
Hope we get roms for it as well.
:victory: Yesss... XDA Thread for Auxus Nuclea.. feeling exciting.. Best Wishes, Guy.. :good::good:
dhavalg said:
That was really helpful, but i hoped some words about the phone from your mouth as well.
Need some comparison too,
But any ways it was awesome....I am going to continue with my order, actually i was planning on cancelling it. But now not...
Thanks for the videos.
Hope we get roms for it as well.
Click to expand...
Click to collapse
only thing is RAM so many apps consumes more memory .waiting for tweaked ROM.other than that the phone is gud..
I prefer to use Titanium Backup to freeze unwanted app rather to uninstall.. this app will save lots of RAM..
without source kernals cant we install custom Roms or stock roms, iam newbie to these things, i have a doubt, i have seen so many custom ROMs for samsung devices that means have samsung provided the source kernals???? please reply any experts
Without kernel source who would buy this phone and on top of that its Chinese brand better buy micromax Indian brand.....
ashok20205 said:
without source kernals cant we install custom Roms or stock roms, iam newbie to these things, i have a doubt, i have seen so many custom ROMs for samsung devices that means have samsung provided the source kernals???? please reply any experts
Click to expand...
Click to collapse
Yes, We can install Custom ROMs (Themed ROMs or Ported ROMs). But, with kernel sources a lot of development can happen. :good:
akashavel said:
only thing is RAM so many apps consumes more memory .waiting for tweaked ROM.other than that the phone is gud..
Click to expand...
Click to collapse
No need to wait for a Custom ROM. You can try One-Power-guard app, Clean master and Greenify app's.
Chris s5830i said:
Without kernel source who would buy this phone and on top of that its Chinese brand better buy micromax Indian brand.....
Click to expand...
Click to collapse
This mobile is good at it price with the spec's. Even Micromax is not providing kernel sources. Also, compared to the support of Micromax, iBerry is doing best.
abhiek bist said:
is the costumer service good...i am really thinking to buy this phone but this brand was never heard before by me.....
in ur opinion which phone would be better
1. canvas 4 (micromax)
2. auxus nuclea n1 (iberry)
3. Xolo play (XOLO)
Click to expand...
Click to collapse
Check the facebook page. Then you can decide
Can you post link for CWM for nuclea N1
can you help me with the link for CWM
[GUIDE] How to flash CWM or TWRP recovery and root your device!
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device.
Credits: This root method was found from a facebook group that uses this phone, i am just posting it here. Give thanks to Eduardo Perez!
I ported TWRP recovery for this device and Eduardo did the CWM recovery. Also thank rua1 from XDA for his MTK droid tools. Koush for his driver installer.
USERS OF 4037N/T or any other model that is from T-Mobile, DO NOT TRY ANY OF THE RECOVERIES HERE. NOR TRY TO MOD IT IN ANY WAY. YOU WILL BRICK YOUR DEVICE.
See post #68 for more info
Notice for T-Mobile owners (4037N)(MetroPCS) Users!!
Requirements:
1. A windows PC
2. Universal ADB driver
3. ROOT ALCATEL 4037N 4.4.2 zip file
Instructions:
1. Download the ROOT ALCATEL 4037N 4.4.2 zip file here and extract it anywhere on your desktop.
2. Go inside the extracted folder and extract iRoot zip file and install iRoot. Disable any antivirus you may have or User Account Control(UAC).
3. After installing iRoot, go to your phone and enable USB debugging. Look up how to enable it on google if you don't know how to.
4. Run iRoot as administrator and then connect your phone.
5. Wait until it detects it and then press the root button and your phone will be rooted.
If you want to see a video of the rooting check here
BACKUP YOUR DEVICE BEFORE DOING ANYTHING IN THE EVENT SOMETHING GOES WRONG. BACKUP TUT HERE
Requirements:
1. A windows PC
2. SP flash tools
3. CWM or TWRP recovery
4. Universal ADB driver
5. MTK preloader driver
VIDEO TUT By nashj1975
https://www.youtube.com/watch?v=xNWALNB9M-Q
[GUIDE] FLASH CWM/TWRP
1. Download the attached files below and extract them anywhere on your computer, then download the FLASHTOOLS and SP FLASHTOOL folder here and extract them.
2. Go to this link to get the drivers specifically for your phone. Install the program after the download is complete.
3. Go to the FLASHTOOLS folder and extract Driver_Windows_MTK_Preloader drivers and then go to auto install and install the drivers. This is for the preloader drivers which will be used later.
4. Install ADB driver by going to the Flash Tool folder and then adb folder, then locate the adb file and run it as administrator. Go to settings, then development if you don't see development go in about and click on the build number 7 times to enable development mode. Enable USB debugging.
5. Open the SP flash tools folder and run flashtool.exe as administrator.
6. If anything pops up just ignore it and click ok.
7. Go to option then connection and make sure auto detect is selected.
8. Go to scatter loading and click it, locate the scatter file from the extracted folder and open it.
9. When it opens click on the recovery option and click the check box.
10. Decide which recovery you want and rename it to recovery.img.
11. Click on the location in the same recovery option and choose your recovery.img
12. Turn off your phone and take out the battery.
13. Click on Download and then connect the phone to the PC.
14. If you did everything i said above, it will flash your chosen recovery.img and you will have a custom recovery.
[GUIDE] ROOT/Superuser
1. Reinsert the battery and turn on the phone.
2. Go to the alcatel 4037 folder that you extracted.
2.Place the root_grouper-tilapia_4.4_update.zip and superuser.zip on your sdcard or internal storage. ( If these root files don't work, just download the UPDATE-SuperSU-v2.46.zip and flash that.)
3. Turn off the phone and boot it into recovery mode.
4. Navigate using the volume keys for CWM recovery or just use touch for TWRP. Use the power button to select.
5.Select install zip from sdcard and choose zip from sdcard. Locate the zip files that you sent.
6. Flash the root_grouper-tilapia_4.4_update.zip first then flash the superuser.zip
7. Reboot your phone and there you go. Root Access
OR
ROOT YOUR PHONE USING THE 360 ROOT Chinese apk attached below.
Copy the 360ROOT.apk to your sdcard either internal or external.
Install it and then follow the screenshots below to see how to root.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yeah i know it says 4032A but it was just to show you how to use it.
After clicking on root your phone will be rooted. P.S You need an internet connection for the root apk to work.
How to unroot
This is a guide for unrooting your device. Download universal unroot from the play store, or look for an apk file.
Install it and bam you're unrooted.
How to make a backup of your device
There are many ways to back up your phone. Some are better than some but you can decide which you want to use.
1. Using recovery . Boot into recovery mode and select backup.
2. Using Mtk droid tools. Connect your device to the PC with usb debugging enabled. Run mtk droid tools as administrator and wait for it to load. Click on the root,backup and recovery tab. Select backup.
3. Using SP flash tool. This is recommended for those who don't yet have root on their device. There is an original post for this method from rua1 here
How to unbrick your device
Unbricking can be done using the One touch upgrade tool from the alcatel website http://www.alcatelonetouch.com/global-en/products/smartphones/pop_d3.html#.VLbhTiwYGzU
1. Download the Mobile Upgrade S 4.2.7 upgrade tool and install it
2. Turn off your device and take out the battery.
3. Reinsert the battery and open the tool.
4. Select your device from the drop down menu 4037 and follow the instructions from the tool.
I am trying to root the fierce 2 but it doesnt seem to flash the twrp recovery even though I am sure I did everything right! Nothing happens at the last step where you said to take out the battery then click download and connect the phone to the PC. Nothing happens the phone just shows the Actel logo and then vibrates and turns of then back on over and over. Any ideas?
Note I did not do step 5
GhostSamuraiX said:
I am trying to root the fierce 2 but it doesnt seem to flash the twrp recovery even though I am sure I did everything right! Nothing happens at the last step where you said to take out the battery then click download and connect the phone to the PC. Nothing happens the phone just shows the Actel logo and then vibrates and turns of then back on over and over. Any ideas?
Note I did not do step 5
Click to expand...
Click to collapse
Use my unbricking method to restore your device, and i don't think Step 5 should be a problem.
Phones not in boot loop it works fine. Just nothing happens when I click download and connect the phone without the battery.
check your pm :good:
sweet my buddys been missing having root since he upgraded from the evolve, even better that there is a custom recovery.
whats the facebook group page cant seem to find it.
https://www.facebook.com/groups/556165774484796/ this is the link to the group on facebook...note the facebook group is in spanish tho so if you want you can use google chrome and let automatic translation do the work for you
Hi..thanks for ur guide...
I'm succesful root my 4035x
Sent from my 4035X using XDA Free mobile app
xmanner77 said:
Hi..thanks for ur guide...
I'm succesful root my 4035x
Sent from my 4035X using XDA Free mobile app
Click to expand...
Click to collapse
great happy that i helped :good:
---------------------
Thread updated!!
Thread is updated with a video showing how to root the phone @Altnot
New Video
New video showing how to root is coming soon! Thanks to junior member @nashj1975. :highfive:
Stock ROM
--
Thanks to OP. Successfully flashed CWM and rooted my OT 4035D (Alcatel One Touch Pop D3 with KitKat 4.4.2). Was unsuccesful with Towel Root, Framaroot and Kingo Root, but this did the trick! I already clicked your thanks button.
CVAngelo said:
Thanks to OP. Successfully flashed CWM and rooted my OT 4035D (Alcatel One Touch Pop D3 with KitKat 4.4.2). Was unsuccesful with Towel Root, Framaroot and Kingo Root, but this did the trick! I already clicked your thanks button.
Click to expand...
Click to collapse
Nice glad i could help
Hi
Thanks
abdullah.alhossain said:
Thanks
Click to expand...
Click to collapse
You're welcome
Root : JB 4.2
Root LAVA iris 300
1. Download The Framaroot APK here and install it to your phone.
2. Goto Settings > Security > and tick “Unknown Sources“.
3. Run Framaroot, choose Superuser or SuperSU.
4. Select Boromir or Bahamir.
5. You will see Success.
6. Reboot device, Done. :good:
OR
1. Download The Kingoroot APK here and install it to your phone.
2. Run King Root application.
3. Click on Root button. It take sometime for the rooting process.
4. Reboot device, done. :good:
Stock Rom : JB 4.2
Unbrick your LAVA iris 300
1. Download Stock Rom from here (by xdafirmware)and extract it.
2. Download mtk_usb driver from here and install it.
3. Open Sp flash tool, select scatter.txt.
4. Click on download.
5. Power off your device (confirm off), then connect usb cable. (dnt press any key, flash with battery).
6. System will detect your device as mediatek_preloader_com.
7. Sp Tool will recognise your Phone and flashing will start.
8. Once the flashing process is completed, a green ring will appear on your system.
9. Dissconnect, Power On, Done :good:
Full Instructions with images here (by techsultan).
Nandroid Backup/restore (recommended)
Take Full backup of your LAVA iris 300
You can take full backup with Custom recovery (Carliv/TWRP).
OR
1. Download Mtkdroid tool here (by gsmhosting)and extract it.
2. Download Pdanet+ andoid usb driver from here and install it.
3. Install BusyBox.apk in your device from playstore.
4. Enable debugging mode on your phone > Settings > Development. Tap 'android usb debugging' and make sure it's checked.
(if there is no option for development then go to setting > about phone > build number, tap on it 7 times, Go back to Settings menu and now you'll be able to see “Developer options” there.)
5. Open MTK Droid Tools folder with right-click on 'MTKdroidTools.exe' and Select 'Run as administrator'.
6. Wait several seconds while MTK Droid Tools communicates with your device. give root permission to adb-shell on your device.
7. Click the 'root' button in MTK Droid Tools to get temporary root shell.
8. Now get nvram backup. For full backup go to 2nd tab click on backup.
9. Here will be saved all backup \MtkDroidTools\backups.
10. Prepare this backup to make it flashable through SP Flash Tool. To do it, click on To 'prepare blocks for Flash Tool.'
11. A new windows will appear asking for a .md5 file of the backup. So navigate to the MTK Droid Tools folder where your backup is found. Open the backup that your have created earlier and select the files.md5 click open.
12. Wait for MTK Droid Tools to copy the files for SP Flash Tool, check the status messages until the copying/task is complete. Done
Full Instructions with images here (by rajit).
Restore :
1. Open , SP Flash Tool.exe run as administrator. Load the scatter file (click scatter-loading) which you have prepared from MTK Droid Tools to be flashable through SP Flash Tool.
2. After you loaded scatter file, All must checked except for Cache and USERDATA and most importantly, do not check DSP_BL or Preloader else you'll brick it.
3. To restore device, click Download from SP Flash Tool, a prompt will appear, just click Yes. Immediately connect your Power OFF device to your computer via USB .
4. Wait for the tool to detect your device and restore the Stock ROM that you have made. An alert with a green circle appears after successfully downloading the restore.
Full Instructions with images here (by MTK Hacker Pro).
Custom Recovery : TWRP/CTR
( Download and flash it with Sp FLash tool. Press Vol up and Power Key to boot in Recovery. )
Twrp for LAVA iris 300
TWRP2.8.0 alpha here
Note : There is lots of bug in it. pls post here.
CTR for LAVA iris 300
Carliv 2.4 alpha here
Note : Flipped Screen Bug.
wahh! Now just make a best kitkat rom for 300 plz!! ur gr8
in the name of allh
Infinix Note 3 Pro X601 or infinix note 3 pro
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Review the phone
1- root the phone
How to Root Infinix Note 3 X601/Pro X537 and Port TWRP Recovery Image
Infinix Note 3 and its Pro version are the latest phones from Infinix mobility, though the pro version is not yet available in Nigeria. This article will guide you on how to easily install/port twrp recovery and root infinix Note 3 X601 and Note 3 X537.
Requirements
1-twrp from here "note 3 and note 3 pro "
2- sp flash tool here
3-USB Vcom here
4- super user here
5- pc
6- usb cabel
ltes go >>>
First, install the Mediatek Vcom driver on your computer.
Mediatek USB Vcom Drivers: Download and Manually Install MTK Preloaded USB VCOM Port Drivers on Windows 10/8.1/8/7/Vista/Xp.
Mediatek is one of the most popular and used mobile chipset, it powered numerous Android smartphones especially those produce by Chinese companies. MTK devices are easier to root and changing of IMEI on them is super easy when compared to other chipset. This article will guide you on how to install mediatek USB vcom drivers on any windows computer/Pc which include Windows 7, 8, 8.1, Vista, Xp and Windows 10.
Vcom driver is an essential tool that must be installed on your Windows PC before you can flash a custom ROM, install firmware upgrade or most importantly when trying to unbrick your mediatek device. Without mediatek USB Vcom Drivers properly installed on your Windows 10 computer, SP Flash tool or any other recommended tool will not be able to detect your MTK device like Tecno, Infinix, InnJoo, Xiaomi, Gionee etc. Without these tools detecting your device, there won’t be flashing or upgrading of ROM.
Now that you know why installation of Mediatek Preloaded USB Vcom port driver on your Windows Pc is important, below are the necessary things you should do before initiating the installation process.
1.) Disable driver signature enforcement: It is a security measures Microsoft put in place to avoid installation of unsigned/unrecognized drivers. Since Mediatek USB vcom drivers is not digitally signed, you have to permanently or temporarily disable it before you can install MTK Preloaded USB Vcom driver. To avoid to much digression, please check our previous post for this guide.
2.) Computer: Your Pc must be running either Windows 10, 7, 8.1, 8, Vista or XP to install the MTK preloaded driver.
3.) Mediatek USB Vcom Drivers: Off course you have to download the driver before you can install it. Visit (https://www.datafilehost.com/d/309cd7f0) to download MTK port driver. Works for all MTK65XX including MTK6582, MTK6592 /MTK6589 / MTK6577.
4.) Guide: To have a successful Installation of MTK Vcom Port driver, follow the steps below thoroughly.
How to Install Mediatek USB Vcom Drivers on Any Windows Pc.
Step 1: I will assume you have already downloaded mediatek usb vcom drivers from the URL posted above. Extract it content to your desktop using WinZip, 7Zip or any extracting software installed on your Pc.
Step 2: Hold Win + R key to launch the Run dialogue box >> type devmgmt.msc and click on OK or hit Enter key to open up Device Manager. Alternatively, you can also open Control panel >> Search for Device manager >> Double click to open it. Windows 10 users can also right click on the start menu and click on Device Manager.
Step 3: Click on your Computer name or any other installed driver >> Click on the Action tab >> Select Add Legacy Hardware.
Step 4: A new Windows will Pop saying Welcome to the Add Hardware wizard, Click on Next.
Step 5: From the new page, select the second option that says Install the hardware that I manually select from a list (Advanced), then click on Next.
Step 6: On the Next screen, make sure the Show All Devices option is selected and click on Next.
Step 7: Click on Have Disk on the Next Screen >> Then click on Browse >> navigate to desktop or the folder you extracted the Vcom drivers into.
Step 8: Open it and navigate to USB VCOM drivers >> Select your version of Windows >> Select your System type either 32 bit or 64 bit >> Click on Open. Windows 8, 8.1 and 10 users should select Win 7
Step 9: On the next screen, select MediaTek Preloader USB VCOM Port and click on Next. Click on Next again to initiate the installation process and select Install this driver software anyway when prompt.
Step 10: Wait for few seconds for the installation to complete. You might see error like this device cannot start. (Code 10), ignore and click on Finish.
That’s it, Mediatek USB Vcom Drivers has been successfully installed on your Windows PC. You can proceed to flashing of Custom or Stock ROM, upgrading of firmware and unbricking of any bricked MTK device.
- Start by extracting the TWRP recovery file for your Note 3 Pro to your folder of choice. Am assuming you already downloaded the specific one from the links provided above.
-Then extract the SP flash tool also to a folder of your choosing then run the run the flash_tool.exe as administrator.
-Open the extracted SP flash tool folder, locate the SP flashtool .exe file and run it as an administrator, click the scatter-loading or browse option, depending on the sp flash tool in use, then navigate to the extracted TWRP recovery folder and select the txt recovery image for your device labeled scatter.txt.
-Once it loads up, Untick all the other options as you don’t need them and only select recovery.
-Before going to the next step, make sure you have turned on USB debugging on your device. You can do that by navigating to the Settings then Developer Options. Turn it on by checking the box after USB DEBUGGING.
-Turn off your phone, click the Download button of the SP flash tool. Connect the device to your computer using the USB cable from the manufacturer and the download will start.
-The process of installing the TWRP recovery tool on your device will begin and end when you see a green button. Unplug your device.
That is the first stage. The next stage is the most important so stay attentive.
Step 2: How to root Infinix Note 3 Pro
-The first stage is moving the SuperSu.Zip file to the internal memory of your device or to an SD card in your phone. Advised to copy it to the main folder.
-Boot your phone into recovery mode. You can do that by pressing and holding the power and volume up buttons together. In this mode, your arrow keys will be the volume keys while your power button the selection tool.
-From the options on the screen, choose to install from sd card.
-Locate the SuperSu.Zip file then select it using the power button.
-The process of rooting and flashing your phone will begin after the selection of this file.
-Following the completion of the installation of the SuperSu.Zip file, reboot your device using the power button.
Congratulations, you have just rooted your Infinix Note 3 (Pro)! You may have noticed that to root Infinix Note 3 Pro requires two main stages. Be sure you follow them strictly since they only work in that order.
Note: Incase you brick your infinix note 3 or note 3 pro phone in the process and you are unable to power it on, you can download the INfinix Note 3 Romor here and note 3 pro rom and flash it on your phone using the Infinix SP flash tool downloaded above to restore your phone. Make sure you use the specific Rom to your NOTE 3 phone.
the end i hope some one here made a cus rom for the phone .
Important
Already tried this method 2 weeks ago , I would like to add that , you have to flash the su zip file after flashing the custom recovery whatever it was , (I installed CTM recovery),to avoid the boot loop, don't start you device , just flash the su zip after the recovery
I HAVE A PECULIAR PROBLEM! I have an Infinix Note 3 X601, updated to Android N, Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem began when I tried to factory reset it from within the settings, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. if i connect it to pc, the pc wont recognise it, the pc will show a message that the USB device is not recodnisd, and the phone will boot to recovery again.
i tried to reflash the stock firmware using sp flashtool and it always fails as the system will not recognise the phone, even though i have the required mtk drivers installed.
i tried to flash this https://androidhq254.blogspot.com.ng...te-3-x601.html and http://bbs.infinixmobility.com/thread-149453-3-1.html custom roms using the custom recovery, they all fail mid way.
i will appreciate any help i can get in reviving this phone. thanks in advance
P.S
when i try to flash a rom through recovery it shows:
mount system partition
mount: failed to mount /dev/block/platform/mtk-mdc.0/11230000.mdc.0/by-name/system at /system: no such file or directory
unmount system partition
unmount of /system failed: no such volume
format system partition
E:Error in /storage/sdcard/........
(status0)
installation aborted
what do you make of this pls?
degreatone said:
I HAVE A PECULIAR PROBLEM! I have an Infinix Note 3 X601, updated to Android N, Rooted and Philz Touch 6. 59, 0 custom recovery installed. Problem began when I tried to factory reset it from within the settings, the phone rebooted to recovery to wipe the data, and since then it wont boot to system again, whenever i try to boot it to system, it will go to recovery. if i connect it to pc, the pc wont recognise it, the pc will show a message that the USB device is not recodnisd, and the phone will boot to recovery again.
i tried to reflash the stock firmware using sp flashtool and it always fails as the system will not recognise the phone, even though i have the required mtk drivers installed.
i tried to flash this https://androidhq254.blogspot.com.ng...te-3-x601.html and http://bbs.infinixmobility.com/thread-149453-3-1.html custom roms using the custom recovery, they all fail mid way.
i will appreciate any help i can get in reviving this phone. thanks in advance
P.S
when i try to flash a rom through recovery it shows:
mount system partition
mount: failed to mount /dev/block/platform/mtk-mdc.0/11230000.mdc.0/by-name/system at /system: no such file or directory
unmount system partition
unmount of /system failed: no such volume
format system partition
E:Error in /storage/sdcard/........
(status0)
installation aborted
what do you make of this pls?
Click to expand...
Click to collapse
Brother, solve this problem in the drivers of mobile I advise you to download a new Windows and setup drivers and sp flsh tool
PLS File Name Is TWRP_X601-H536-Note3.rar Is It Work For H537 (Note 3 Pro) Also ?
I m using note 3 pro running nougats
I have tried to root using above method and got OK sign on sp flash tool.. after that when i try to restart in recovery mode its always restart in stock recovery instead of twrp or other
Kindly help as i have to root my device in any way
komalsaeed said:
I m using note 3 pro running nougats
I have tried to root using above method and got OK sign on sp flash tool.. after that when i try to restart in recovery mode its always restart in stock recovery instead of twrp or other
Kindly help as i have to root my device in any way
Click to expand...
Click to collapse
Is your problem solved now? I also have infinix note 3 pro using crlivtouch recovery and everything is ok
Any Custom Rom For X601 PLS Or How To Port Any Rom For This Device @elbana10
other link for super su please
Hi,
I would like to ask about my note 3 pro infinix
my phone was fine till I fine HD games. felt so slow and lag.
so I decided to root it by myself
I wasnt back up the ROM early. its my first time to root mediatek device..
in the middle of processing with flash tool. I "accidentally" klik format+download which made my phone dead.
I was frustated for 2 day to ressurect the phone. I searched for the ROM to flash it again. many ROM I tried. but then I found one. and my phone live again.
but then I notice there's was some error
1. wifi error NVRAM 0x10
2. battery is draining fast in idle state
so then I ask someone to root my phone. because rooting infinix note 3 pro is a pain. I got problem with some TWRP recovery booting. (when I press volume up + power button it wont boot the TWRP recovery,neither CTR).
and then my phone was rooted.
I tried to fix about NVRAM error WIFI with some tutorial in XDA forum . then it fixed
but the battery issue still there. I tried to calibrate it with some root apps,tried to empty to 0% and charge it to 100%, and I tried Lspeed app and HEBF app but the battery still a pain for idle state.
I notice it drops 30% - 40% per night (about 6 hours)
and I notice theres is an error. my SIM2 IMEI is wrong.
how can I fix the battery ?
before I bricked it the battery was super save. when I ressurect it the battery is a pain for idle state.
did I flash a wrong ROM
It was my fault I didnt back up the ROM
and didn't save the build number
I lives in Indonesia. so flash ROM for Indonesia
I got that ROM from Xclub forum
but the battery issue wont solve
please help
Lordgfreeze said:
Is your problem solved now? I also have infinix note 3 pro using crlivtouch recovery and everything is ok
Click to expand...
Click to collapse
Yes its aright now using CTR. Pretty easy to use. Thank you
Hello,
After i searched almost 24 hours on the web for a way to root this stupid tablet, i find an unusual one.
I try to make it clear for all of you.
Requirements:
- PC running Windows 7/8/8.1/10 | You can use linux but I cannot guide you as how to setup adb drivers or preloader drivers,
- USB Cable,
- ADB-Setup file (see below),
- TWRP recovery aka recovery.img.zip,
- SP_Flash_Tool (SPFT),
- MT6580_Android_scatter.txt (see below),
- MTK_USB_All preloader usb vcom drivers,
- superuser.zip (don't confuse this file with phh superuser, they are not the same),
- phh superuser (install it at the end, on the tablet).
DO NOT EXTRACT the superuser.zip !!
You can extract all other files.
Flashing TWRP
1. Download the MTK_USB_All preloader drivers from the archive of this post and follow the guide on how to install.
2. Download the new SP_Flash_Tool from the archive of this post and extract it anywhere.
3. Open the SPFT folder and locate flash_tool.exe and RUN it as Administrator.
4. If it says anything like cannot locate scatter, press ok and ignore that message. Go to scatter loading and select your MT6580_Android_scatter file you downloaded.
5. Download TWRP recovery aka recovery.img.zip from the archive of this post.
Extract the archive to get the recovery.img file.
5.1 After you open the flash_tool.exe, look on the list from the scatter file for recovery; Follow step 6.
6. Select the recovery by pressing the little box next to it and then move over to location of the recovery and choose the recovery.img.
7. Power off your tablet, wait 1-2 minutes and then connect your usb cable to your PC.
8. Press Download at the top and then connect your tablet to your PC throught the USB Cable.
If you have the battery in and it doesn't work, wait until the logo of the tablet shows up then try again. If that doesn't work then try again without the battery.
8.1 When the Download is finished (you will see a red bar, then a green bar to confirm), if the tablet doesn't open up, remove the USB Cable from it and wait for few seconds.
Then the TWRP menu should appear. This should do the magic.
Rooting:
1. Download superuser.zip from the attached files and place it on your SD card.
1.1 ADB arhive has in it a ADB Drivers installer that only needs 15 seconds to do the trick. Please follow the instructions from there.
1.2 ADB folder will be located from default on partition C, or if you have another one, on the OS partition.
2. Reboot your phone to recovery using the command "adb reboot recovery" from a CMD runned as administrator from the ADB folder, or do it via external buttons.
2.1 When you execute the command "adb reboot recovery" the TWRP Menu will appear.
3. Navigate using volume buttons and select using power button, or touch if you want. Go to install from the TWRP Menu then choose superuser.zip from SD card.
Flashing should take only few secconds, then reboot your tablet.
4. Install phh superuser app from the arhive of this post and that's it. You will be rooted.:good:
* I hope this will help you to do this step more easily then me. Be well !
Password for archive is: vfd1100
DevOpsXDA said:
Hello,
After i searched almost 24 hours on the web for a way to root this stupid tablet, i find an unusual one.
I try to make it clear for all of you.
Requirements:
- PC running Windows 7/8/8.1/10 | You can use linux but I cannot guide you as how to setup adb drivers or preloader drivers,
- USB Cable,
- ADB-Setup file (see below),
- TWRP recovery aka recovery.img.zip,
- SP_Flash_Tool (SPFT),
- MT6580_Android_scatter.txt (see below),
- MTK_USB_All preloader usb vcom drivers,
- superuser.zip (don't confuse this file with phh superuser, they are not the same),
- phh superuser (install it at the end, on the tablet).
DO NOT EXTRACT the superuser.zip !!
You can extract all other files.
Flashing TWRP
1. Download the MTK_USB_All preloader drivers from the archive of this post and follow the guide on how to install.
2. Download the new SP_Flash_Tool from the archive of this post and extract it anywhere.
3. Open the SPFT folder and locate flash_tool.exe and RUN it as Administrator.
4. If it says anything like cannot locate scatter, press ok and ignore that message. Go to scatter loading and select your MT6580_Android_scatter file you downloaded.
5. Download TWRP recovery aka recovery.img.zip from the archive of this post.
Extract the archive to get the recovery.img file.
5.1 After you open the flash_tool.exe, look on the list from the scatter file for recovery; Follow step 6.
6. Select the recovery by pressing the little box next to it and then move over to location of the recovery and choose the recovery.img.
7. Power off your tablet, wait 1-2 minutes and then connect your usb cable to your PC.
8. Press Download at the top and then connect your tablet to your PC throught the USB Cable.
If you have the battery in and it doesn't work, wait until the logo of the tablet shows up then try again. If that doesn't work then try again without the battery.
8.1 When the Download is finished (you will see a red bar, then a green bar to confirm), if the tablet doesn't open up, remove the USB Cable from it and wait for few seconds.
Then the TWRP menu should appear. This should do the magic.
Rooting:
1. Download superuser.zip from the attached files and place it on your SD card.
1.1 ADB arhive has in it a ADB Drivers installer that only needs 15 seconds to do the trick. Please follow the instructions from there.
1.2 ADB folder will be located from default on partition C, or if you have another one, on the OS partition.
2. Reboot your phone to recovery using the command "adb reboot recovery" from a CMD runned as administrator from the ADB folder, or do it via external buttons.
2.1 When you execute the command "adb reboot recovery" the TWRP Menu will appear.
3. Navigate using volume buttons and select using power button, or touch if you want. Go to install from the TWRP Menu then choose superuser.zip from SD card.
Flashing should take only few secconds, then reboot your tablet.
4. Install phh superuser app from the arhive of this post and that's it. You will be rooted.:good:
* I hope this will help you to do this step more easily then me. Be well !
Password for archive is: vfd1100
Click to expand...
Click to collapse
Hi, i can use this way Also for Vodafone Smart Tab 10?
DevOpsXDA said:
Hello,
After i searched almost 24 hours on the web for a way to root this stupid tablet, i find an unusual one.
I try to make it clear for all of you.
Requirements:
- PC running Windows 7/8/8.1/10 | You can use linux but I cannot guide you as how to setup adb drivers or preloader drivers,
- USB Cable,
- ADB-Setup file (see below),
- TWRP recovery aka recovery.img.zip,
- SP_Flash_Tool (SPFT),
- MT6580_Android_scatter.txt (see below),
- MTK_USB_All preloader usb vcom drivers,
- superuser.zip (don't confuse this file with phh superuser, they are not the same),
- phh superuser (install it at the end, on the tablet).
DO NOT EXTRACT the superuser.zip !!
You can extract all other files.
Flashing TWRP
1. Download the MTK_USB_All preloader drivers from the archive of this post and follow the guide on how to install.
2. Download the new SP_Flash_Tool from the archive of this post and extract it anywhere.
3. Open the SPFT folder and locate flash_tool.exe and RUN it as Administrator.
4. If it says anything like cannot locate scatter, press ok and ignore that message. Go to scatter loading and select your MT6580_Android_scatter file you downloaded.
5. Download TWRP recovery aka recovery.img.zip from the archive of this post.
Extract the archive to get the recovery.img file.
5.1 After you open the flash_tool.exe, look on the list from the scatter file for recovery; Follow step 6.
6. Select the recovery by pressing the little box next to it and then move over to location of the recovery and choose the recovery.img.
7. Power off your tablet, wait 1-2 minutes and then connect your usb cable to your PC.
8. Press Download at the top and then connect your tablet to your PC throught the USB Cable.
If you have the battery in and it doesn't work, wait until the logo of the tablet shows up then try again. If that doesn't work then try again without the battery.
8.1 When the Download is finished (you will see a red bar, then a green bar to confirm), if the tablet doesn't open up, remove the USB Cable from it and wait for few seconds.
Then the TWRP menu should appear. This should do the magic.
Rooting:
1. Download superuser.zip from the attached files and place it on your SD card.
1.1 ADB arhive has in it a ADB Drivers installer that only needs 15 seconds to do the trick. Please follow the instructions from there.
1.2 ADB folder will be located from default on partition C, or if you have another one, on the OS partition.
2. Reboot your phone to recovery using the command "adb reboot recovery" from a CMD runned as administrator from the ADB folder, or do it via external buttons.
2.1 When you execute the command "adb reboot recovery" the TWRP Menu will appear.
3. Navigate using volume buttons and select using power button, or touch if you want. Go to install from the TWRP Menu then choose superuser.zip from SD card.
Flashing should take only few secconds, then reboot your tablet.
4. Install phh superuser app from the arhive of this post and that's it. You will be rooted.:good:
* I hope this will help you to do this step more easily then me. Be well !
Password for archive is: vfd1100
Click to expand...
Click to collapse
where is the archive?