I got ipega 9055 game controller and noticed moving keys don't right. Keys get stuck or not register. Controller works in other phones.
This problem seems to be in other lenovo phones also.
I found some other people have similar issues:
https://forums.lenovo.com/t5/forums/v3_1/forumtopicpage/board-id/lp05_en/thread-id/923/page/2
In lenovo forums fix seems to be changing region to RU what seems weird. I have not tried this yet.
I was thinking does anyone else have game controller and issues like this?
Yes I do! And it drives me nuts trying to play Mario Kart. ?
Been trying everything to fix it...
titaniumfish said:
Yes I do! And it drives me nuts trying to play Mario Kart. ?
Been trying everything to fix it...
Click to expand...
Click to collapse
I'm going to flash custom rom because of this. I tried everything i can think of with no result..
This issue has been pretty long and Lenovo is probably not going to do anything about it.
It would be nice to know if problem persists in custom rom. I strongky think its software related but i will see after 14 days...
Been tempted to stay clear of rooting this one for the likes of sky go and android pay so let me know how you get on with the flash. See if it helps. I was checking the Bluetooth specs on my P2 compared to other devices and it doesn't seem to be that. So I'm stumped. It appears the joystick is the only thing not responding properly. One press and it appears to be stuck in that position. I know for a fact it's not the joystick. Works a treat on my old S5.
titaniumfish said:
Been tempted to stay clear of rooting this one for the likes of sky go and android pay so let me know how you get on with the flash. See if it helps. I was checking the Bluetooth specs on my P2 compared to other devices and it doesn't seem to be that. So I'm stumped. It appears the joystick is the only thing not responding properly. One press and it appears to be stuck in that position. I know for a fact it's not the joystick. Works a treat on my old S5.
Click to expand...
Click to collapse
I also wanted to stay stock for awhile longer..
Im also positive there is nothing wrong with my gamepad, tested mine with S6.
I let you know how it goes.
I can tell you now that nothing's wrong with your gamepad. In the MegaN64 app there's an option in input, controller, controller diagnostics to check the button and directional pushes. As you can see from the first screenshot the left joystick pushed down (AXIS-Y) is stuck on +0.67. Somewhere between half and a whole push. I had released the joystick while I took this screenshot. It's just stuck there. In the second screenshot I pushed the right trigger button (AXIS_GAS) Which cancelled the stuck joystick position but then that trigger button got stuck on +0.40. Nearly half a push. I had also let go of the trigger button while I took this screenshot. Personally I think it's down to Lenovo using cheap Bluetooth hardware. That's my guess. I'd love to be proved wrong though.
titaniumfish said:
I can tell you now that nothing's wrong with your gamepad. In the MegaN64 app there's an option in input, controller, controller diagnostics to check the button and directional pushes. As you can see from the first screenshot the left joystick pushed down (AXIS-Y) is stuck on +0.67. Somewhere between half and a whole push. I had released the joystick while I took this screenshot. It's just stuck there. In the second screenshot I pushed the right trigger button (AXIS_GAS) Which cancelled the stuck joystick position but then that trigger button got stuck on +0.40. Nearly half a push. I had also let go of the trigger button while I took this screenshot. Personally I think it's down to Lenovo using cheap Bluetooth hardware. That's my guess. I'd love to be proved wrong though.
Click to expand...
Click to collapse
Thanks for testing.
I really hope its not hardware problem.
I'm sad that this is pretty common problem with Lenovo phones and there is no support from their part.
How did you get on with the flash?
Any custom ROMS have any better result?
titaniumfish said:
How did you get on with the flash?
Any custom ROMS have any better result?
Click to expand...
Click to collapse
I have not yet flashed because of waiting period. Still 8 days remaining.
But in dev section i got answer that custom rom will fix issue.
Please check here: https://forum.xda-developers.com/showthread.php?t=3592706
page 4 #38
Then again I suppose there's no Knox counter on P2 haha. I'm assuming you can unroot if necessary?
Are you going to install that custom ROM in the link? Or another?
No knox counter but OEM lock what you can unlock from dev settings(waiting time 14 days). After that you loose warranty.
I was thinking to try AOSP extended(same as link) but i have not decided.
I suppose you can unroot and go back to stock but warranty is gone.
edit: Now im on Resurrection mod. No problem with bt controller what so ever.
Kiryo24 said:
No knox counter but OEM lock what you can unlock from dev settings(waiting time 14 days). After that you loose warranty.
I was thinking to try AOSP extended(same as link) but i have not decided.
I suppose you can unroot and go back to stock but warranty is gone.
edit: Now im on Resurrection mod. No problem with bt controller what so ever.
Click to expand...
Click to collapse
I was going to update anyone else on stock ROM. Just received a Gamesir WIRED controller and it's STILL experiencing the same issues. So after all that it's not been a Bluetooth issue at all. Just software. Great news that the Custom ROM worked for you. Think I might have to go down the same route. Which ROM was it you went for?
titaniumfish said:
I was going to update anyone else on stock ROM. Just received a Gamesir WIRED controller and it's STILL experiencing the same issues. So after all that it's not been a Bluetooth issue at all. Just software. Great news that the Custom ROM worked for you. Think I might have to go down the same route. Which ROM was it you went for?
Click to expand...
Click to collapse
https://forum.xda-developers.com/lenovo-p2/development/7-1-1-resurrection-remix-v5-8-2-lenovo-t3575669
Ah that would explain why my Drone was acting crazy yesterday when I was flying it with my USB Gamepad, I thought the gamepad was shot ! It never crossed my mind that the P2 might be at fault...oh well a few more days to wait before I can unlock it.
I wonder if they'll just ever release Nougat for it? Haha. They're slacking big time.
btw if there is still people using stock system and want issue fixed, Lenovo has asked me for log info. I couldn't wait and flashed custom rom. Here is thread link if anyone is interested:https://forums.lenovo.com/t5/P2-P2a42-Smartphones/bluetooth-controller-problem/td-p/3652943
Nice one, Kiryo. I'm still on stock for Android pay as it's come in so handy. ? Already had developer options enabled as I thought there might be an extra Bluetooth setting to adjust to try and fix the issue but there wasn't. So I've enabled bugging reports now. I'll send them a report over as soon as I get the controller connected later on. ?
Kiryo... Just curious. How are you getting on with the Custom ROM? Does it still have the same features the stock ROM has? Such as VR mode and dual app mode? Cheers...
titaniumfish said:
Kiryo... Just curious. How are you getting on with the Custom ROM? Does it still have the same features the stock ROM has? Such as VR mode and dual app mode? Cheers...
Click to expand...
Click to collapse
Well there is all that i need. I have no need for VR mode but i guess it works in apps normally.
I also dont use dual app mode but i guess there is mutitasking option there.
Custom roms offer much more configurations than stock.
Im overall happy. There is still some issues with volume echoing with speaker and volume sliders during call etc.. but nothing too serious.
I'm just happy with functional bt controller.
Yeah I bet. Thanks for the info. ?
I'll look into making a nand backup as well I think. (If that still exists)
Related
OK, now I have a problem.
If I turn my xoom off and then on again the touchscreen will not respond to any input, only hardware buttons work.
If I hold volume up and power button to restart, it restarts and everything works OK. I can but it to sleep and wake it up and still everything works. Everything works until I turn it off and on again, then the problem returns and I need to hold volume up and power button to restart it again to get the touch screen working.
I searched the net but didn't find anything similar.
Any ideas?
is it still stock or you rooted / update kernel ?
errevi said:
is it still stock or you rooted / update kernel ?
Click to expand...
Click to collapse
Its complitly stock wifi only Xoom, bought from US about two weeks old.
I tried Factory reset, it didn't change anything.
Strange thing is that volume up and power reset fixes it every time. And it works fine until i turn it off again. What does this volume up and power button command do exactly, soft reset? If soft reset fixes it, it can't be a hardware problem or can it?
If I were you I would return it cuz to me that sounds like a defect with your xoom. But if u messed with it (rooting/unlocking) they won't even touch it.
Motive101 said:
If I were you I would return it cuz to me that sounds like a defect with your xoom. But if u messed with it (rooting/unlocking) they won't even touch it.
Click to expand...
Click to collapse
Like i already said, i haven't messed with it, it's completely stock.
About returning it... The problem is that i'm in Europe and i bought my Xoom from US, so i'm not really excited about sending it back.
Is it somehow possible to install the current android 3.0.1 rom again? Without unlocking and rooting?
I do not know if it works on the xoom but other tablets have a calibration ini file that you can place on the root of your SD card and reboot letting it recalibrate the touch screen? Let me know and I can send that to you?
poisike said:
Like i already said, i haven't messed with it, it's completely stock.
About returning it... The problem is that i'm in Europe and i bought my Xoom from US, so i'm not really excited about sending it back.
Is it somehow possible to install the current android 3.0.1 rom again? Without unlocking and rooting?
Click to expand...
Click to collapse
gysgtusmc said:
I do not know if it works on the xoom but other tablets have a calibration ini file that you can place on the root of your SD card and reboot letting it recalibrate the touch screen? Let me know and I can send that to you?
Click to expand...
Click to collapse
Thanks for trying to help! I'm not sure i want to mess with this yet. I talked to Motorola about my problem and the seemed very interested in my problem, so i will wait and see what they suggest.
Any news from there? I have a similar situation here (malfunctioning touchscreen, and I'm from Europe).
You can read my story here http://forum.xda-developers.com/showthread.php?t=1036009
My malfunctioning is slightly different from yours, but I'm interested in what Motorola says for a problem like this.
Ieracos said:
Any news from there? I have a similar situation here (malfunctioning touchscreen, and I'm from Europe).
You can read my story here http://forum.xda-developers.com/showthread.php?t=1036009
My malfunctioning is slightly different from yours, but I'm interested in what Motorola says for a problem like this.
Click to expand...
Click to collapse
They are still thinking how they can help me, there is no solution yet, I will let you know when I get a solution from them.
And yes, my problem seems different from you. No one have reported anything similar to my problem.
I have seen a few threads similar to your problem.
poisike said:
And yes, my problem seems different from you. No one have reported anything similar to my problem.
I have seen a few threads similar to your problem.
Click to expand...
Click to collapse
Really? I haven't seen anything like my problem in forums, and everyone told me that my problem is "strange" :S
However, just in case, have you thought about how to return the Xoom from Europe to US? Or are you directly talking with Motorola to file a RMA practice? After all, we should have one year of international warranty by Motorola, isn't it?
Ieracos said:
Really? I haven't seen anything like my problem in forums, and everyone told me that my problem is "strange" :S
However, just in case, have you thought about how to return the Xoom from Europe to US? Or are you directly talking with Motorola to file a RMA practice? After all, we should have one year of international warranty by Motorola, isn't it?
Click to expand...
Click to collapse
In fact someone from Motorola US contacted me and offered help, so I can't really say anything bad about Motorola, they are really friendly and helpful. They offered to replace my Xoom, but later discovered that i'm not in US and suggested that I should be able to get a replacement from europe.
Before I was contacted by Motorola US, I sent a email to Motorola UK and they also apologized for the problems I had and offered to replace my Xoom, only problem is that they don't have any in stock at the moment, so I have to wait about two weeks.
As my Xoom works great after I force reboot it, it's not a problem for me to wait, I can use my Xoom until I get a replacement.
I would like to thank Motorola for the great support that they have offered me and I will update this thread when my issue is resolved.
But back to your problem, I suggest that you contact your nearest Motorola office, i'm sure they will try to help you.
poisike said:
But back to your problem, I suggest that you contact your nearest Motorola office, i'm sure they will try to help you.
Click to expand...
Click to collapse
I'm trying to do it right now
A little update.
I have been using my faulty Xoom for over two weeks now. I didn't turn it off so it worked until today. Today i tried to install a app from Market and My apps crashed, so i tried to stop it and this caused Launcer to FC (Does Launcer FC cause a automatic reboot?). The screen went black and in about 20 seconds it did show me the lock screen and i had no touch screen control. So i force rebooted it and now it doesn't even start up anymore, it's stuck on boot animation.
So it's starting to get really frustrating... I'm even considering to buy another Xoom, but this really isn't a solution, i have no use for two (if i ever get a replacement).
Has anyone any ideas? Why is it now stuck on boot animation, doesn't this look like a software problem? Is there any way to push clean images to it without unlocking? I understand that unlocking will void my warranty?
Is it possible to flash the official stock images without unlocking?
Ok, i got it to boot up again. I did Wipe data/factory reset and now it boots up again, but still no touch control.
And it seems that i have confirmed that doing too many force reboots will mess up the system.
BTW, there is a way to get into Android recovery on WIFI only Xoom, i wish i had known this before, "adb reboot recovery" works.
Can someone please answer my question, is it possible to flash the official stock images without unlocking? Maybe that will fix my touch screen control problem...
I've having this same issue but mine is worse.. the touchscreen is not working AT ALL.. only the power button works..
I can restart the xoom with the volume up power button but after it restarts still no response from the touchscreen!
What can I do to fix this?
Any help would be appreciated..
touch screen sensitivity is so low, sometime it gets stuck when typing or just miss a few keys and very very annoying. is there a way to fix this ATM ? i'm not sure its software problem or my phone is defected. i flashed like 5 6 roms already but the problem still there, change to another keyboard and samething . any help ?
Software. Have to wait for an official fix
Sent from my A0001 using Tapatalk
sjhotwings said:
touch screen sensitivity is so low, sometime it gets stuck when typing or just miss a few keys and very very annoying. is there a way to fix this ATM ? i'm not sure its software problem or my phone is defected. i flashed like 5 6 roms already but the problem still there, change to another keyboard and samething . any help ?
Click to expand...
Click to collapse
I feel your pain. My situation is absolutely the same. I beleive it could have started after I used the chinese car charger and power bank on vacation. Did you use something like that?
sjhotwings said:
touch screen sensitivity is so low, sometime it gets stuck when typing or just miss a few keys and very very annoying. is there a way to fix this ATM ? i'm not sure its software problem or my phone is defected. i flashed like 5 6 roms already but the problem still there, change to another keyboard and samething . any help ?
Click to expand...
Click to collapse
The problem is in the touchscreen firmware and the fix have to be released from synaptics and not frome Oneplus.
The fact is that it may take a few or a long time based on the issue and it may be enven never be fixed, who knows.
As now i am really disappointed. They should have never release da device knowing of such a major bug.
ky3bmu4 said:
I feel your pain. My situation is absolutely the same. I beleive it could have started after I used the chinese car charger and power bank on vacation. Did you use something like that?
Click to expand...
Click to collapse
No, nothing related to the charger tho haha. the problem started as soon as i turn on the phone for the first time and it went crazy like that since then. i flashed almost every rom on here still no good. i flashed fusionjack slimsaber rom earlier and it really improved alot . you might want to check that rom out.i'm gonna stick w/ slimsaber for a while now i guess
sjhotwings said:
No, nothing related to the charger tho haha. the problem started as soon as i turn on the phone for the first time and it went crazy like that since then. i flashed almost every rom on here still no good. i flashed fusionjack slimsaber rom earlier and it really improved alot . you might want to check that rom out.i'm gonna stick w/ slimsaber for a while now i guess
Click to expand...
Click to collapse
Thx for the advice. For me the issue seems to be solved randomly when I restored the 33R in Twrp. However some other problems remain: like not getting back to the mobile Internet after leaving the wifi area or loseing the network at all ( curable by switching on and off the airplane mode or rebooting respectively).
My phone is cursed really xD
ky3bmu4 said:
Thx for the advice. For me the issue seems to be solved randomly when I restored the 33R in Twrp. However some other problems remain: like not getting back to the mobile Internet after leaving the wifi area or loseing the network at all ( curable by switching on and off the airplane mode or rebooting respectively).
My phone is cursed really xD
Click to expand...
Click to collapse
try slimsaber , it worked very good for me . and hope it work for you too
sjhotwings said:
try slimsaber , it worked very good for me . and hope it work for you too
Click to expand...
Click to collapse
I'm not sure if this is the same issue, but when you run a touch screen test, does it work with more than one touch? IE is multitouch working? I had an issue the other day and I resolved it by turning off the phone, attaching it to the charger and then turning it back on (read it on the oneplus forum). It is a known issue and they are working on bringing us the fix.
Hope this is helpful.
I have this issue too, although it's been mitigated somewhat by the most recent software patches they pushed in 30O and 33R. I'm on a CM nightly at the moment and it's certainly usable. I made the issue a lot better by disabling haptic feedback in the SwiftKey settings - it almost feels like that extra effort to run the vibrating motor causes the screen to respond badly or something.
Is it doing this?
http://youtu.be/XsGPsDP4V0U
If so this is what mine is doing and it's soooo annoying trying to type.
http://www.androidheadlines.com/201...ti-touch-issues-oneplus-one-fix-incoming.html
Some-not me, have been able to mitigate the problem by running a code through terminal emulator.
This has been brought up in CM bug log as Bacon 55.
You don't have to be rooted to do this.
Type: su (if you're rooted)
Type: cat /sys/class/input/input0/baseline_test
Press enter.
Note that you will need to do this every time you reboot your phone.
Credits to a member on jira cm. Forgot to name! Hope it works for you
I've tried everything and everything failed.
Let's hope synaptics pushes out a fix soon. I can't stand this issue. Basically two different touches near each other are recognized as a swype -_-'
i did a test using multitouch test app. i use 1 finger touch on the phone and got a red dot, finger #2 gave me a blue dot . as soon as my 2 fingers get close together 1 of the dot disappear, also test w/ 4 5 fingers same result .thats why if you text really fast , you get alot of missing words and sometime it lag and get stuck.
I think that until this gets fixed the phone will be not ready to be sold,too...
Sent from my Oneplus One
Here is a fix I have tried and it has helped me a lotttt.
https://play.google.com/store/apps/details?id=br.shop4apps.touchscreenbooster.com
DuckMcQUack said:
I think that until this gets fixed the phone will be not ready to be sold,too...
Sent from my Oneplus One
Click to expand...
Click to collapse
Is this phone worth purchasing since customer service is not readily available. I'm not sure if I want to spend my money and not be able to get quality customer service. What are your thoughts?
alhadee12 said:
Is this phone worth purchasing since customer service is not readily available. I'm not sure if I want to spend my money and not be able to get quality customer service. What are your thoughts?
Click to expand...
Click to collapse
As long as the touchscreen issue is not fixed the phone has to be considered to be bugged and faulty. I would not spend my money on a defective phone at a very few weeks from N6 release that will be a superior terminal by far.
Even if it gets fixed it will be not worthy the same as N& is near to come anyways.
I wish i didn't buy mine.
DuckMcQUack said:
As long as the touchscreen issue is not fixed the phone has to be considered to be bugged and faulty. I would not spend my money on a defective phone at a very few weeks from N6 release that will be a superior terminal by far.
Even if it gets fixed it will be not worthy the same as N& is near to come anyways.
I wish i didn't buy mine.
Click to expand...
Click to collapse
Thanks, I started becoming more concerned because users have been paying long wait times for service and possibly having to ship back to China at the customers cost. That's a bad deal.
alhadee12 said:
Thanks, I started becoming more concerned because users have been paying long wait times for service and possibly having to ship back to China at the customers cost. That's a bad deal.
Click to expand...
Click to collapse
Definitely. I would stay away from this thing.
And by the way who knows if the ghost touches/swypes problem is not even a software issue just as the multitouch not working when placing the phone on a non-conductive surface...
hi everyone - not a new issue, but seems like most ppls phone has this figured out now after 44s.
Getting ghost touches and very slow/laggy scroll/swipe response...basically have to press and drag the finger to get anything working.
Currently running stock CM11s 44s with a locked bootloader, completely flashed back to stock using the zip file from cyanogens website. but i have tried CM, Omni, paranoid, and have tried diff kernels including franco, but it doesnt seem to wanna work.
here is a link to my screencast - kinda hard to see but i tried to record what happns when i imitate typing.
https://drive.google.com/file/d/0B1quWiDbFcajdkdTaGhwZzc4M1k/view?usp=sharing
any help would be appreciated! i have seen other posts on this, but nothing seems to be working! what am i missing!?!? :crying:
I have seen other people complain about this and it seems to be a bug, there is no fix at the moment. Wipe the screen clean with a microfiber/lint free cloth while the phone is off. If you think it's hardware damage then use your warranty and send it in.
hmm. I have contacted one plus and have submitted a ticket a while ago, but they are extremely slow in responding. its been over 20days now. Since the touchscreen works fine for the first 15 20mins, i thought it would be a software issue that i could somehow fix....
There will be a new Touchscreen firmware soon
nice!! where did u hear/read this? any ideas when?
hassan3216 said:
nice!! where did u hear/read this? any ideas when?
Click to expand...
Click to collapse
it's a known problem. I have it too. I don't think a firmware update is going to fix it.
http://gadgets.ndtv.com/mobiles/new...defect-affecting-touchscreen-digitiser-625211
https://forums.oneplus.net/threads/touch-screen-issues-were-listening.186829/
Hello, I have Samsung galaxy s5 G900P with stock rom 5.0 .
I have noticed that the rotation doesn't work even if I activate auto rotation or not , When I test my sensors with this code *#0*# I found that the gyroscope and the accelerometer stuck and the test fails .
I used the safe mode but no difference.
Please help.
I had the same issue. From what I know, if the test fails, your hardware for it went bad. I have to use a rotation app to go landscape. I just deal. Until I get a new phone. There's really only a couple apps it's annoying for, at least in my case. Not being able to track my steps doesn't really bother me. I know if I'm walking enough without a device needing to tell me.
Kreatur3 said:
I had the same issue. From what I know, if the test fails, your hardware for it went bad. I have to use a rotation app to go landscape. I just deal. Until I get a new phone. There's really only a couple apps it's annoying for, at least in my case. Not being able to track my steps doesn't really bother me. I know if I'm walking enough without a device needing to tell me.
Click to expand...
Click to collapse
I think if I try to flash another rom maybe it will be fixed?
Have you try that?
abdomedj said:
I think if I try to flash another rom maybe it will be fixed?
Have you try that?
Click to expand...
Click to collapse
I have flashed every room available for my phone. Rotation has never worked. It's hardware, not software, sadly.
Hello, so i had my OnePlus one for a while and just recently i dropped it lucky the screen didn't crack and opens up just fine but the touch stopped working is there a fix for this? And how do i go about it.. I'm currently in Egypt so there isn't really any replacements and anyone who knows much about this device to be able to repair it at a decent price. I would like to fix it on my own, and i honestly hope its just a wire unplugged or something..
Thanks.
Rexee said:
Hello, so i had my OnePlus one for a while and just recently i dropped it lucky the screen didn't crack and opens up just fine but the touch stopped working is there a fix for this? And how do i go about it.. I'm currently in Egypt so there isn't really any replacements and anyone who knows much about this device to be able to repair it at a decent price. I would like to fix it on my own, and i honestly hope its just a wire unplugged or something..
Thanks.
Click to expand...
Click to collapse
hi firstly tell me what trouble shooting have you done and secondly what rom are you on is it stock or custom
kallum7 said:
hi firstly tell me what trouble shooting have you done and secondly what rom are you on is it stock or custom
Click to expand...
Click to collapse
I was on a Custom rom i forgot the name but i think it was Tuga its been a while since i last used the phone due to the issue. But the touch screen didn't work in recovery either.
Rexee said:
I was on a Custom rom i forgot the name but i think it was Tuga its been a while since i last used the phone due to the issue. But the touch screen didn't work in recovery either.
Click to expand...
Click to collapse
please follow this https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 and when it says it is only for hard bricks a=only still use it
Rexee said:
Hello, so i had my OnePlus one for a while and just recently i dropped it lucky the screen didn't crack and opens up just fine but the touch stopped working is there a fix for this? And how do i go about it.. I'm currently in Egypt so there isn't really any replacements and anyone who knows much about this device to be able to repair it at a decent price. I would like to fix it on my own, and i honestly hope its just a wire unplugged or something..
Thanks.
Click to expand...
Click to collapse
If you're screen stopped working after dropping it, it is most likely damaged. Dropping it will not cause any rom to malfunction and stop touch from working. It may be a loose connection, or if you got the device used from somewhere, the screen may have once been replaced and the replacement may not be as good as the original (which by no means was perfect either).
It happened to me. Open your opo, disconnect and then reconnect the screen.