Hi all, I need some help. Somehow my phone one day ended up deleted all my old pictures. I never back them up and want to try and recovery them.
I've been googling and tried about 4 different data recovery programs, but at the end forwhatever reasons ends up disconnecting from my phone, my phone freezes and i'd have to do a hard reset.
I do not have root, any ideas would be helpful... ty
Related
i recently bought a htc Desire S. it was working fine, for day or so. now every time i start it i get 'The process com.android.phone has stopped unexpectedly' if i press wait.. it lets me get through a few of the setup options, then it does it again, and sometimes does the same for process .com.htc.bgp (but only once). if i press force close, it keeps rebooting and just shows the htc logo.
so i cannot start the phone.
ive tried a factory reset (twice) with no luck, i have tried 'solutions' from many threads, none seem to work. is there a way i can re-install android 2.3 or something?
does same thing in safe mode.
thankyou.
If you've only just bought it then I'd take it back for a replacement, it sounds like a hardware fault to me.
Only other thing I can think it might be would be a faulty SIM card. Have you tried booting it without a SIM in?
Could try without sim and sd card
You could r flash an ruu, but as it's new you'd be better off to just take it back and ask for another one
Sent from my HTC Desire S using XDA Premium App
delicious.cake said:
ive tried a factory reset (twice) with no luck, i have tried 'solutions' from many threads, none seem to work. is there a way i can re-install android 2.3 or something?thankyou.
Click to expand...
Click to collapse
Some days ago I messed up my buttons (i was deleting some files with root explorer), touch screen was working fine but all buttons not ! I did 2 factory reset but nothing. I ended to reinstall ROM which solved my problem so maybe could help you to.
I'm doing well, you have to pull out a battery for a while and then come back it goes.
Hello everyone,
I searched the forums for awhile but could not find a satifying answer for my question. So i am hoping you guys will have an answer for me.
First of all i would like to point out that i am not looking for an answer for how to unbrick the phone. There are several guides and hopefully when i get home i will be able to fix the problem. *Fingers crossed*
I did not have my Galaxy S for long. After getting it and installing KIES and updating my firmware the battery life what terrible so I rooted the phone and then installed Gingerbread 2.3.6 JVU. it worked like a charm.
Yesterday when I was playing with the CWM application, I decided that i was going to back up the phone and backed it up using the application. This morning one of my programs was acting weird and I decided to restore the backup I have done yesterday.
Upon going into applications and CWM, I chose the restore option and started the process. Everything was going smoothly, the phone was plugged in to the charger as well.
When the phone rebooted after the initial process I am stuck at logo screen. i can go into download mode (That is why I am hoping that I will be able to unbrick it) however that is as far as the phone goes. When I try to go into CWM Recovery mode, I am once again welcomed by the phone getting stuck at logo screen.
Does anyone have any idea as to why this might have happened? To avoid future problems is there any extra steps I should have taken before using the CWM restore function?
Thanks for the help.
m_hawkmoon said:
Hello everyone,
I searched the forums for awhile but could not find a satifying answer for my question. So i am hoping you guys will have an answer for me.
First of all i would like to point out that i am not looking for an answer for how to unbrick the phone. There are several guides and hopefully when i get home i will be able to fix the problem. *Fingers crossed*
I did not have my Galaxy S for long. After getting it and installing KIES and updating my firmware the battery life what terrible so I rooted the phone and then installed Gingerbread 2.3.6 JVU. it worked like a charm.
Yesterday when I was playing with the CWM application, I decided that i was going to back up the phone and backed it up using the application. This morning one of my programs was acting weird and I decided to restore the backup I have done yesterday.
Upon going into applications and CWM, I chose the restore option and started the process. Everything was going smoothly, the phone was plugged in to the charger as well.
When the phone rebooted after the initial process I am stuck at logo screen. i can go into download mode (That is why I am hoping that I will be able to unbrick it) however that is as far as the phone goes. When I try to go into CWM Recovery mode, I am once again welcomed by the phone getting stuck at logo screen.
Does anyone have any idea as to why this might have happened? To avoid future problems is there any extra steps I should have taken before using the CWM restore function?
Thanks for the help.
Click to expand...
Click to collapse
Maybe your backup was corrupted somehow. You could have tried wiping the dalvik cache after restoring your backup (before rebooting), but its too late now. Since you can get into download mode, you can easily fix the problem (your device is just soft bricked - nothing to worry too much about).
Theonew said:
Maybe your backup was corrupted somehow. You could have tried wiping the dalvik cache after restoring your backup (before rebooting), but its too late now. Since you can get into download mode, you can easily fix the problem (your device is just soft bricked - nothing to worry too much about).
Click to expand...
Click to collapse
The phone rebooted automatically. Did not give me the chance to do anything beforehand.
As you said the phone was soft bricked so when i got home that day i just fixed it. No problem. However I am really really into getting to find out how a 1 day old back up can get corrupted.
Ive been running a GTN7000 on rooted ICS for some time without any errors however today I decided to remove Chainfire 3D, after the compulsory reboot my phone shows no display after the initial logo. The normal jingles and vibrations take place and the buttons are lit but there is no screen output.
Does anyone know how to fix this without wiping my phone? thanks
It seems like you have a soft brick. Try a reset via Samsung Kies or look for a soft brick undo guide or something.
I am sorry I cannot help any further as I do not own a note myself and therefore have minimal experience with the device.
Would like to hope you can fix it.
Hit thanks if I helped.
i think you should try to soft reset it. you can use any reset method you already know....
sorry if i couldnt help you any further too. but as for me, when i face some error like that, i've always reset my phone (coz i already backup my data with titanium backup)
Hi guys, sorry for the delay.
I've finally managed to fix it.
After fighting through a whole heap of errors and reflashing the device at least 10 times I now have my phone back to a fully working rooted ICS state. I did however loose all my data.
Hey guys,
Is data recovery possible after a flash? Also, what is wrong? I have searched but no answer directly hits on this. I am not a tech guy- Biology- sorry for that ahead. To the issue, I dlowded a software update to my Galaxy s3.....and boom froze on Samsung screen. I can turn phone off and on. It would not boot past Samsung. So I went into cache partrition, and tried a system reboot- cannot. So then I seen a program that supposively recovers data after factory reset if you do nothing else to the phone. However, problem I hit te dreaded factory reset- nothing. Over a software update? My computer is not recognizing the device. So I went to Samsung, they tried installing software, however, the computers were recognizing, but not connecting. One tech said they did not have flash- I went back again, the othertech said they did. Anywho, after 4 days, I forked my phone over to a repair guy. He I believe tried Odin- as it currently sits in odin mode. Now it was getting into download mode- but ow I have this message- " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." A samsung guy mentioned it might be able to be flashed, as my concern data- not backed up. This info is pretty important, as I have several contacts and mssgs. The two modes my phone can go into: Odin and recovery. I could really use the help, on both saving data, and getting the phone to fire- as it might be able to- but data?
Thanks in advance.
Use helium for recovery data
Peluche321 said:
Use helium for recovery data
Click to expand...
Click to collapse
Before or after the a Flash? Thanks for the reply.
Hi, I'm in a bit of a rage right now. Need my phone for work, and also afraid of loosing all the pictures and videos I've taken
So my phone has worked perfectly for months, updated several times, but today after the last update it's stuck on the boot logo, the Samsung one.
I've tried hard reset with Power+Down, it just reboots to the same logo and stays there forever. I also can't get into recovery mode with Power+Up+Home, it just gives me a yellow triangle with an exclamation mark in it for 1 second then boots back to the samsung logo. Tried Kies 3, it doesn't recognice the phone at all, tried everything in there.
The only thing I can access is the Download mode Down+Power+Home, I have no idea what to do there, I've read about Odin but that looks like some NASA-stuff way above my knowledge, isn't there just a way to get it back to previous version? Orginal, stock and all that? Don't wanna mess with roots if that can be done
I'm out of ideas, please help me, are all my data gone? Pictures, video etc? :'(
Help please
*Sorry for bad English, not my native, but I hope it got trough.
Sounds like an update gone wrong. Restoring the phone isn't so hard but saving your pictures and data is harder in most cases. You can try using Smart Switch and see if your device shows up on failed updates, maybie it can repair the installation. You can also use Smart Switch to restore the phone completely, but this DELETES everything on it. If you haven't rooted phone and have warranty, I'd return it to Samsung with strict instructions that phone broke when software update and that you want to keep your data/pictures. If the phone is rooted there are ways to extract data from the phone memory but I'd only do that as a last option.
schoolsux said:
Sounds like an update gone wrong. Restoring the phone isn't so hard but saving your pictures and data is harder in most cases. You can try using Smart Switch and see if your device shows up on failed updates, maybie it can repair the installation. You can also use Smart Switch to restore the phone completely, but this DELETES everything on it. If you haven't rooted phone and have warranty, I'd return it to Samsung with strict instructions that phone broke when software update and that you want to keep your data/pictures. If the phone is rooted there are ways to extract data from the phone memory but I'd only do that as a last option.
Click to expand...
Click to collapse
Yeah, I did the upgrade with modelname and S/N trough Smart Switch, it worked, but all data was lost including all my contact phone numbers, hade over 350 :| don't think they are synced either? :|
Anyway, glad the phone works, will never install these stupid updates again, never noticed a single improvment after them anyways