Can anyone help me last Monday I bricked my phone by editing the build.prop. I have downloaded a stock rom that is compatible with it.But this morning when I plugged in my phone it was vibrating and boot screen wont even show up (Dead power) and when i checked the disk management,I found that it's storage became like 200mb.Then there are many diskparts that are unusable.
Related
Hello,
yesterday i was so happy about the tw ics update for the TF101G that i couldn't wait and updated it with the blob file flashed to mmcblk0p4.
After the first restart the Asus flash process worked and restartet the device again like everytime i flashed my transformer with this method.
But after the restart the screen stayed black and the background light too and nothing happend.
I tried to restartet the device several times after this but nothing happend, the only thing that works now is APX mode that i can see in my device manager but since i have a tf101g that has sbk3 it wont help me.
So it seems my device is bricked forever. Recocery wont work, normal Boot wont work, not even the screen shows whats up but stays black.
I hope someone can help me because its hard to see an so expensive paperweight in front of me.
And i hope my english isnt that bad to understand.
have you tried plugging it into the mains and rebooting?
Have loaded the battery over night but it didnt helped.
Looks like my expensive Paperweight will stay one.
Loaded the Battery since then and tried to reboot and blind recovery in case only the display driver or something wont work but the display stays dark black.
Hello guys I have been struggling for the past week, my LG G2 phone has been rooted, I flash a custom recovery TWRP then I lunched to my stock rom I then tried to update my firmware to 4.4.2 kitkat the update was downloaded successfully, then it told me to reboot, so I did phone switched off then I was stuck on a boot loop but this time it was a boot loop with a error message on the left top corner. and then it would take be to a dim back screen. I searched the entire week to find a method to get me through the start screen and I found this -> NO Recovery mode, No download mode, after OTA on rooted LG G2 http://forum.xda-developers.com/showthread.php?t=2582142 I done exactly what it was showing, then my phone switched off and now it won't power up. Then I tried turning it on NOTHING phone does't show the LED charging lights, does't respond to the usb being plugged in can't do ANYTHING I am guessing the battery has died so now I don't know what to do, either contact LG or should I try getting a battery that is fully charged or even use a factory cable any ideas guys ?
Call LG support.
Sent from my g2 using Tapatalk
Hello guys,
I'm here for the first time and I would like to hear your opinions on what to do with my N9006 mt6589 which has been bricked. I'll explain what happened. While I was using my phone normally it started to have a strange behaviour, error notifications popped up, couldn't write messages and then suddenly it shut down. Tried to charge it, and still couldn't turn it on. As my battery was weak I changed it and thought that problem will be solved. When I inserted new battery, my phone was still dead. No LED when chargin, no light when pressing Power button, nothing, completely dead. I knew that it was hard bricked. As I'm not a newbie in android world, I managed to install drivers and to make it discoverable by PC as MediaTek Preloader...Only thing that I knew about this clone is model SM-N9006 which is appearing while turning it on (on sticker under battery I have N9002, however I searched for N9006 ROMs to flash on). I don't know any other info about this phone as I recieved it as gift few months ago and I didn't modified anything on it. Don't have back-up. After trying to flash about 20 ROMs I found one which worked for me. But, my problem does not stop here. My phone turned on but stayed awake for few seconds than suddenly shut down again. I entered in Factory Mode which has all chinese words and managed to delete eMMC!!! Oh yes, I made that terrible mistake. Now I'm unable to turn it on again. In CWM eMMC is not mounting, as well as data, system and cache. MTK Droid Tool discovered my phone and I got informations that you can see in attached picture INFO.jpg.
After that I realized that my phone model is A202_mula_64 which I think stands for N9006 MAX. However I didn't succeded in unbricking my phone because no ROM works as I deleted MMC. With this iBaby888 ROM installed on phone now when I check Info in Factory Mode I recieve info that you can see in attached picture PB180003.jpg
Can anyone tell me what to do now? Which ROM to flash and how to repartition MMC and sd-ext??? Do you think that MTK Droid Tool is reliable and discovers right info? If yes, then I have n9006 Max = A202_mula_64.
Sorry for such a long post but I need your help urgently.
PS. Forgot to mention that my phone is dual sim and I can access CWM.
Your help is highly appreciated!!! Best!
Any ideas on what to do guys??
Hello everyone, today I upgraded to a 'newer' version of phicomm i600 that i found online and on the installing that upgrade (in the recovery) it showed some wierd error and when it completed it went blank screen.. I hear logo and contrast is not completly dark, a bit bright (my display didn't died) and when somebody called me, i answered.. so everything is working except I cant see anything (even the phicomm logo) and I cant even load recovery cause I cant see.. Is there any program to show what is happening on mobile cause I tried UNIFLASH and didnt work and I cant even find any firmware.. so HELP PLEASE!
Hello,
Welcome to XDA.
Try posting your question in the forum linked below.
http://forum.xda-developers.com/android/help?
The experts there may be able to help.
dark112 said:
Hello everyone, today I upgraded to a 'newer' version of phicomm i600 that i found online and on the installing that upgrade (in the recovery) it showed some wierd error and when it completed it went blank screen.. I hear logo and contrast is not completly dark, a bit bright (my display didn't died) and when somebody called me, i answered.. so everything is working except I cant see anything (even the phicomm logo) and I cant even load recovery cause I cant see.. Is there any program to show what is happening on mobile cause I tried UNIFLASH and didnt work and I cant even find any firmware.. so HELP PLEASE!
Click to expand...
Click to collapse
So, if anyone get blank screen, but not completly as mine, you can solve it like this. I noticed that a black contrast gets a little brighter sometimes. So, I entered recovery (using power + volume down) mode and noticed there is first brighter than darker blank, so i figured out that I entered recovery mode. Previously I plugged in phone in laptop and then deleted all my files on phone and sd card and only copy original rom that I have found on official SIngapore Phicomm page. Then I turned phone, entered recovery mode, then on blind, went on any kind of update (cause usually update is 2. and 3. option, internal and external, 1. is reboot now).
So I pressed down to pick that update (i guessed) and power and repeat it 2 more times and all I could see is blank. After some time, I saw a phicomm logo.. And reminder ** don't use any Phicomm update found on any internet page cause it's all wrong**
Later I have red that it have installed wrong kernel. I hope it will be at any help!
Hi there first let me say sorry for any spelling mistakes i have dyslexia and its hard for me to spot everything when i look over it so sorry
now down to buissness i have an Alcatel 4 (6) 4g from argos in the uk i think the model on the phone shows as 9001X but also shows as 9001D when you connect wondershare or other tools
i broke the screen on the device and took it to one of thoes little shops in the mall to get it fixed when there the guy told me he could root the device for you for me at the same time i thought yeh cool save me from doing it my self
when i went back to get the phone later that day it worked good in fact perfect he had rooted the device using king root and all was working good the device was working but then it suddenly rebooted out of the blue when it was led on a table
when the device started back up king root was still installed as a system app but it showed the device as not having any root access witch i thought was weird but i just left it like that while i made a few phone calls but again half way through a phone call the device restarted it self again
this time when the phone started back up it showed the pixi 4 logo and then the alcatel logo and refused to move any further its just stuck on this screen. I looked on XDA for a fix but couldnt fine anything for my model the 9001X/D i found one page that said you can format using recovery mode
i held down the power and volume up buttons and got access to the reovery menu and done a factory install and then restarted the phone but again got stuck on the alcatel screen
i sent alcatel an email asking for a stock image to flash from recovery or something but i got no email from them i then tried to use the upgrade tool from the alcatel website witch i thought would do it the phone was found and the upgrade tool started but at 2% but then i get a red error saying failed to read some ingformation check phone status but the phone is turned off as per the instuctions and nothing is on the screen
i cant find a stock image anywhere cant get the tool to work when i goto recovery and tell the phone to reboot into bootloader mode to run fastboot its never worked even when the phone was working it would simply say waiting for devices on cmd also in recovery if i enable adb still finds nothing i have no idea what i can do to get anything working or reset the phone at all
does anyone know what i can do or have an image that would work anything at all my phone only like 2 months old and i dont know what todo as the stall is no longer in the mall to go back to