My Droid Maxx got a blank screen, but I'm sure that the system is running since I can access the storage using USB connection.
Sometimes it response to the ActiveDislay but looked like the pictures I attached.
Is it the hardware problem? It's screen is also blank even when booting up, is there anyway to flash ROM? please advice, thanks in advance!
Related
Hey guys, I have an s2x where the phone screen is completely broken and I'm unable to see anything on the screen. I can hear the sounds for boot up and alarms and stuff so I know the phone is working just the screen is busted. It's too expensive to fix the display so I was wondering if there is any way at all that I can recover my files without using the screen? it is not running a custom rom and requires that I manually click "USB mass storage mode" when i plug it into the laptop so it's not as simple as doing that.
thanks for your help
My Desire S has just developed a weird fault that I'm hoping someone on here can help me with. The display is completely blank at all times (including no bootloader screen), the digitizer is still working as I'm getting haptic response when I press power button then slide to unlock as I can remember where the lock ring is. The phone appears to be functioning correctly (receiving calls, SMS, notifications etc). The notification LED is working, phone connects to PC as get the USB connected tone on Windows, although I think it is in charge-only mode as can't access the phone contents. All else seems to be fine.
The phone has unlocked bootloader and has been sim-unlocked with a code and is running ViperSaga 2.2.0 ROM which was flashed about a month ago. not had any problems with the ROM at all so far so I can't imagine it is a software or firmware issue, however I'm open to suggestions!
Any help you can provide would be greatly appreciated!
If the screen is also blank while in the bootloader, you definitely have a hardware problem.
Aquous said:
If the screen is also blank while in the bootloader, you definitely have a hardware problem.
Click to expand...
Click to collapse
As I feared, thanks mate. Logically it would be the display panel that is faulty if the rest of the phone seems fully functional, would you agree?
If a new screen is needed, would I need a new digitizer as well or are they not matched pairs?
Hello. I have a Motorola Xoom MZ604 that operates but the screen is dark. It started this a while ago.
The device has the stock rom that came with it, when plugged in the charger, the led indicator shows it charging as it changes from white to green, also when plugged into the PC i can browse the files in it, plus tapping on the screen seems to indicate it is functional as it makes system sounds.
Could this be a software or hardware issue??
Any assistance on how to restore the Xoom back will be highly appreciated.
AnthonySanya said:
Hello. I have a Motorola Xoom MZ604 that operates but the screen is dark. It started this a while ago.
The device has the stock rom that came with it, when plugged in the charger, the led indicator shows it charging as it changes from white to green, also when plugged into the PC i can browse the files in it, plus tapping on the screen seems to indicate it is functional as it makes system sounds.
Could this be a software or hardware issue??
Any assistance on how to restore the Xoom back will be highly appreciated.
Click to expand...
Click to collapse
Reboot the device into recovery, if the screen is still really dim/ can't see it then it's a hardware issue, if however you can clearly see the text on the screen then it's software, and since your in recovery I'd suggest a factory reset if you find its software related *note a factory reset will wipe all internal data so pull what you need/want before resetting
See this for entering recovery process.
Recovery: http://youtu.be/koxgbdQuzOQ
sent from space
I've gone to many of threads looking for help to try to get my phone back on and working but nothing has helped so far. I can get to the fastboot screen and thats about it. Every choice on there either gets me stuck back on the black screen or it stays on the motorola screen until the battery runs out. When i plug it into my computer it installs the drivers but there isnt a way for me to get into the files on my phone and treats it like an unrecognized device, any help?
Hey @bobbybelcher,
Check this out : http://forum.xda-developers.com/moto-g/help/moto-g-bootup-problem-recovery-mode-t3122492
Do you have the same or similar issue?
If so,tell me your :
OS,Bootloader Version,what commands you tested/working and preferably images like the ones I did.
Dear all,
I recently got water damage on my OP7Pro. Now my screen doesn't work and the phone doesn't respond to touch. So I am left with a black screen that sometimes flickers so I can see the bare minimum.
The phone however does boot into the system and recovery and it vibrates when I slide the notification button up and down. When I plug it in my PC, it only shows the drivers and stuff.
Now I know I cant fix this phone, but I want to recover some important photo's.
Here is the real problem:
Since I have never adjusted the developer settings;
OTG allowance is disabled
USB debugging is disabled
So when using adb, it doesn't recognize my device.
When I boot into recovery I have to fill in a password.
Yet I DO know the password, I just don't know how to enter it.
I'm on the internet for 2 days now without succes.
Does anyone know how I can recover the data?
Any help would be highly appreciated.
Thanks!
Martijn
martijn10022 said:
Dear all,
I recently got water damage on my OP7Pro. Now my screen doesn't work and the phone doesn't respond to touch. So I am left with a black screen that sometimes flickers so I can see the bare minimum.
The phone however does boot into the system and recovery and it vibrates when I slide the notification button up and down. When I plug it in my PC, it only shows the drivers and stuff.
Now I know I cant fix this phone, but I want to recover some important photo's.
Here is the real problem:
Since I have never adjusted the developer settings;
OTG allowance is disabled
USB debugging is disabled
So when using adb, it doesn't recognize my device.
When I boot into recovery I have to fill in a password.
Yet I DO know the password, I just don't know how to enter it.
I'm on the internet for 2 days now without succes.
Does anyone know how I can recover the data?
Any help would be highly appreciated.
Thanks!
Martijn
Click to expand...
Click to collapse
If you never unlocked the bootloader or enabled add, you are stuck.