Database Info

[Q] troubles booting after Flashing ANY ROM

Hi,
I rooted successfully my galasy ace plus(s7500),
Having CWM 5.5.0.4 I rtyed to flash from Gingerbread to kitkat 4.4 speedMod Rom and CM10 JB but encountered same problem,
After wipping data/cash/davlk ,
I installed via zip file: Rom + GAAP but when i reboot at finish,
The phone waking up showing SAMSUNG logo turning white and whiter till the screen is colmpletle white and it just stays like that until i pull out the battery...
the phone wont startup!
then restored successfully from backup...
please help!
good:

pop up

I had the same problem and i tried two custom roms but it didn't work
and even when i tried to flash CWM 6.0.4.7 and when i entered to CWM it presented the same problem
please devs we want help

download and flash official firmware from sammobile with odin and see what happen.

Zaraee said:
download and flash official firmware from sammobile with odin and see what happen.
Click to expand...
Click to collapse
1. why would it help? I successfully restored from backup and phone is up&running.. problem happens after flashing custom rom...
2. how can i know witch firmware to download?
my country dosen't appear in the list...
I found few other countries with the same "MODEM" -S7500XXLB1 as in setting->about phone-> "Baseband"
how can i match PDA, CSC to my current phone?
what are they mean?
Thanks,
Dotan

dotan9222 said:
1. why would it help? I successfully restored from backup and phone is up&running.. problem happens after flashing custom rom...
2. how can i know witch firmware to download?
my country dosen't appear in the list...
I found few other countries with the same "MODEM" -S7500XXLB1 as in setting->about phone-> "Baseband"
how can i match PDA, CSC to my current phone?
what are they mean?
Thanks,
Dotan
Click to expand...
Click to collapse
1. if any problem occured it's the best to flash stock rom..and remember before flashing custom rom for cm or speedmod sometime you need to wipe system for best result.
2. if your country is not listed, dial *#1234# and check your PDA. XX mean for German and LB1 is your firmware version.
CSC is sales code.

Zaraee said:
1. if any problem occured it's the best to flash stock rom..and remember before flashing custom rom for cm or speedmod sometime you need to wipe system for best result.
2. if your country is not listed, dial *#1234# and check your PDA. XX mean for German and LB1 is your firmware version.
CSC is sales code.
Click to expand...
Click to collapse
Is there a way to solve this without flashing the stock rom . Because the stock is in rapidgator and terafile.
If there isn't and I get stock instaled in my phone in a samsung store will ir work. I'm from India So they will flash INU or INS

DayanGts7500 said:
Is there a way to solve this without flashing the stock rom . Because the stock is in rapidgator and terafile.
If there isn't and I get stock instaled in my phone in a samsung store will ir work. I'm from India So they will flash INU or INS
Click to expand...
Click to collapse
you can try any custom rom from gingerbread..as we know ICS/JB/KITKAT are not stable for our ace plus

DayanGts7500 said:
Is there a way to solve this without flashing the stock rom . Because the stock is in rapidgator and terafile.
If there isn't and I get stock instaled in my phone in a samsung store will ir work. I'm from India So they will flash INU or INS
Click to expand...
Click to collapse
u r from assam right.. we have official firmware on sammobile for india

dotan9222 said:
1. why would it help? I successfully restored from backup and phone is up&running.. problem happens after flashing custom rom...
2. how can i know witch firmware to download?
my country dosen't appear in the list...
I found few other countries with the same "MODEM" -S7500XXLB1 as in setting->about phone-> "Baseband"
how can i match PDA, CSC to my current phone?
what are they mean?
Thanks,
Dotan
Click to expand...
Click to collapse
Maybe you already solved the problem but just so you know:
Indian firmware has a certain bug which causes white screen issues when flashing custom rom
Then, flash a stock rom from a different country no matter if english or french or whatever (it has to be European as there are reports of the bug on arabic and chinese firmwares too)

Androidoo said:
u r from assam right.. we have official firmware on sammobile for india
Click to expand...
Click to collapse
I flashed the official Indian firmware that didn't worked. I also tried csc of Indonesia, Nepal and few other countrys .nothing worked.
---------- Post added at 11:20 PM ---------- Previous post was at 11:13 PM ----------
ShadowsDie said:
Maybe you already solved the problem but just so you know:
Indian firmware has a certain bug which causes white screen issues when flashing custom rom
Then, flash a stock rom from a different country no matter if english or french or whatever (it has to be European as there are reports of the bug on arabic and chinese firmwares too)
Click to expand...
Click to collapse
Is there a mediafire (something similar) link to European stock because I can't download from rapidgator and terafile .

DayanGts7500 said:
I flashed the official Indian firmware that didn't worked. I also tried csc of Indonesia, Nepal and few other countrys .nothing worked.
---------- Post added at 11:20 PM ---------- Previous post was at 11:13 PM ----------
Is there a mediafire (something similar) link to European stock because I can't download from rapidgator and terafile .
Click to expand...
Click to collapse
sammobile, make account, log in, http://www.sammobile.com/firmwares/3/?download=13383

dude i flashed stock no such problems..indian firmware

Androidoo said:
dude i flashed stock no such problems..indian firmware
Click to expand...
Click to collapse
Really never worked for me. what was the basebrand .??

DayanGts7500 said:
Really never worked for me. what was the basebrand .??
Click to expand...
Click to collapse
ddme1 the updaate of 6th july 2013 on sammobile

Androidoo said:
ddme1 the updaate of 6th july 2013 on sammobile
Click to expand...
Click to collapse
Ok will check today. Thanks

ShadowsDie said:
sammobile, make account, log in, http://www.sammobile.com/firmwares/3/?download=13383
Click to expand...
Click to collapse
Hiee bro I did. Flash this and got an error in flashing fat.bin I googled and realize what the problem is. They said I can only flash my owm countrys frimware. Then how other indian people using kit kat.

DayanGts7500 said:
Hiee bro I did. Flash this and got an error in flashing fat.bin I googled and realize what the problem is. They said I can only flash my owm countrys frimware. Then how other indian people using kit kat.
Click to expand...
Click to collapse
dude u need to flash this speed mod version 2.5... thats the only kitkat for ace plus and has buggs

DayanGts7500 said:
Hiee bro I did. Flash this and got an error in flashing fat.bin I googled and realize what the problem is. They said I can only flash my owm countrys frimware. Then how other indian people using kit kat.
Click to expand...
Click to collapse
i have no idea what to tell you
try formatting system partition before flashing european

ShadowsDie said:
i have no idea what to tell you
try formatting system partition before flashing european
Click to expand...
Click to collapse
I did. that didn't work . I will try the Indian one tomorrow. I have a question by the way, my download mode part contains the indian frimware nd the pda and phone contains Thailand frimware because ot titrions custom rom so.

Need help with sprint note 5 frp lock / custom binary blocked by frp (N920P)

my note 5 is stuck in download mode no recovery and has frp lockn on the download screen, odin will not successfully flash any of the firmware, pit that i have tried to put in there ive tried a million versions of odin still with no luck at all. please help me.
i was on the moar rom on the Ol6 firmware when i rebooted and all this began model number n920p

jpres1991 said:
my note 5 is stuck in download mode no recovery and has frp lockn on the download screen, odin will not successfully flash any of the firmware, pit that i have tried to put in there ive tried a million versions of odin still with no luck at all. please help me.
i was on the moar rom on the Ol6 firmware when i rebooted and all this began model number n920p
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. To get you the specific device assistance you need, I'm going to move your thread to your device's Q&A forum. Good luck!

jpres1991 said:
my note 5 is stuck in download mode no recovery and has frp lockn on the download screen, odin will not successfully flash any of the firmware, pit that i have tried to put in there ive tried a million versions of odin still with no luck at all. please help me.
i was on the moar rom on the Ol6 firmware when i rebooted and all this began model number n920p
Click to expand...
Click to collapse
You try re-install the original firmware OI6?....download of sammobile.com

subliminal503 said:
You try re-install the original firmware OI6?....download of sammobile.com
Click to expand...
Click to collapse
yes no luck

jpres1991 said:
yes no luck
Click to expand...
Click to collapse
You need to flash the ok3 firmware.

so, suddenly my battery ran out.. and when i tried to boot up my phone.. it says "custom binary blocked by frp" then i flashed a stock rom from sammobile.com .. odin wa able to flash it.. but my phone still stucks in boot loop! help please???? anyone???? :')

sw rev check fail device 4 binary 3 on galaxy s6

Hello!! I have one galaxy s6 (sm-g920f) and i try to restore it back to stock but every time i am trying to flash it via odin i am getting this error:sw rev check fail device 4 binary 3.. i have tried with full rom( AP,BL,CP,CSC) with and without pit file and with the rom just with the ap and nothing..i have also tried to flash with kies and smart swich and i am getting the same error... i have done all the wipes from the recovery (twrp) and still nothing.. only if i try to flash a custom rom from twrp will boot...now i am downloading the firmware of my device according to my serial number to flash it.. i also tried the method to flash like if you get sboot.bin error..
Can anyone help me please??:fingers-crossed:

i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!

now the problem is that the bootloader is another version from the rom, i cannot see any version of modem, the imei and the product code are blank... i checked them with the phone info app.. now i am downloading the rom with the baseband that shows me the phone info that i have... i also noticed that if i flash a rom which is one file or a rom that is full (bootloader,ap,modem,csc) i am getting error at cm.bin which is on bootloader.. that's why i can install a full rom but without the bootloader file...

Anyone????

i am always getting error at the cm.bin on odin...

i solved my problem by flashing the full stock rom according to the bootloader which was stucked in my phone

domigr said:
Hello!! I have one galaxy s6 (sm-g920f) and i try to restore it back to stock but every time i am trying to flash it via odin i am getting this error:sw rev check fail device 4 binary 3.. i have tried with full rom( AP,BL,CP,CSC) with and without pit file and with the rom just with the ap and nothing..i have also tried to flash with kies and smart swich and i am getting the same error... i have done all the wipes from the recovery (twrp) and still nothing.. only if i try to flash a custom rom from twrp will boot...now i am downloading the firmware of my device according to my serial number to flash it.. i also tried the method to flash like if you get sboot.bin error..
Can anyone help me please??:fingers-crossed:
Click to expand...
Click to collapse
Me too !! helppppppp:crying::crying:
It can be fix if i go to shop ??

TimeOFTimeless said:
Me too !! helppppppp:crying::crying:
It can be fix if i go to shop ??
Click to expand...
Click to collapse
I have the same problem
Everyone can help us ?

when i'm flash with odin "sw rev check fail device 4 binary 3" smart swich software also not supported my device. plzzz help me.......

my problme is solved
flash this without bootloader
G925FXXU3DPB_GG925FBTU3DPB1_BTU_FULL
:good::good::good::good::good::good::good::good::good::good::good:

"IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown
domigr said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
Click to expand...
Click to collapse
thank you for your advise. Now its working but my G920F still having two problem IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown. plsss help meee

mustafa_thora said:
flash this without bootloader
G925FXXU3DPB_GG925FBTU3DPB1_BTU_FULL
:good::good::good::good::good::good::good::good::good::good::good:
Click to expand...
Click to collapse
I cannot boot into recover after this and it's stuck at the s6 logo

help
can someone help me i have galaxy s6 (sm-g920f) i want to back to stock and i just tried tried to install stock firmware 6.0.1 via odin with and without pit and i get this error sw rew check device 4 binary 3 but after i reboot it i have a message an error as occured while updating the device software can someone help me please

domigr said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) and it works!!!
Click to expand...
Click to collapse
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) but my phone still boot loop.
BL : -
ap : AP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
cp : CP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
csc : CSC_OXA_G925FOXA3DPAD_CL7025264_QB8293502_REV02_user_low_ship_.tar.md5
PIT: ZEROLTE_EUR_OPEN.pit
Any one can help ME

smartsecure said:
thank you for your advise. Now its working but my G920F still having two problem IMS SERVICE HAS STOPPED" And Base band and IMEI is unkown. plsss help meee
Click to expand...
Click to collapse
HOW DID YOU FLASH IT CAN YOU PLEASE ELABORATE. I have G920P running 6.0.1 and having the same issue while flashing 5.1.1

Cannot downgrade from 6.0.1 to 5.1.1.
SM-G920F, bought with Android 6.0.1. Phone Info says the phone is manufactured in 2016.11.15. Tried flashing same region Android 5.1.1 via Odin and got the "SW REV. CHECK FAIL. DEVICE: 4, BINARY: 3". Managed to reflash 6.0. Is it possible that the newest 6.0.1 (G920FXXS4DPJ2_G920FOXX4DPH1) won't let downgrade?

You can't downgrade the bootloader version. And since the bootloader it's changed at almost every update, you will only be able to install the latest software version for your country.
If all fails, try emergency software recovery from SmartSwitch

palogada said:
i just flashed it with a full rom but without the bootloader(only ap,csc,modem) but my phone still boot loop.
BL : -
ap : AP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
cp : CP_G925FXXU3DPAD_CL7025264_QB8293502_REV02_user_low_ship.tar.md5
csc : CSC_OXA_G925FOXA3DPAD_CL7025264_QB8293502_REV02_user_low_ship_.tar.md5
PIT: ZEROLTE_EUR_OPEN.pit
Any one can help ME
Click to expand...
Click to collapse
Hi you listed a number of files there, where did you get them as they are not available on the search on these forums, I have the same problem and have managed to get this far from The Binary 1 error so making progress, I now just want to flash the lot so could do with some help on where the the files are.
I used the XEF OCT G920FXXS4DPJ2 Modem+Bootloader which i found on here which has given me a working ish Android phone, the touch screen is flipped on a vertical axis so I am looking to put something else over the top of everything to get it working properly again!
Thanks in advance for your help

cardigan101 said:
the touch screen is flipped on a vertical axis so I am looking to put something else over the top of everything to get it working properly again!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=60411933&postcount=5

check your odin mode bro
DroidTim said:
SM-G920F, bought with Android 6.0.1. Phone Info says the phone is manufactured in 2016.11.15. Tried flashing same region Android 5.1.1 via Odin and got the "SW REV. CHECK FAIL. DEVICE: 4, BINARY: 3". Managed to reflash 6.0. Is it possible that the newest 6.0.1 (G920FXXS4DPJ2_G920FOXX4DPH1) won't let downgrade?
Click to expand...
Click to collapse
i think your phone is p series and you flash wrong rom.pls check odin mode.almost of f series is modified.

Can anyone provide me latest stock firmware for Galaxy J7 2016 (SM-J710FN)?

Hi!
I am in need of latest stock ROM available for Galaxy J7 (2016) Indian variant, which should be flashable through Odin.
After last update in my phone, I could not flash the older firmware through Odin. It shows firmware binary as 3 and device binary as 4.
So, that's why I need latest firmware. I tried downloading it from Updato.com but even after downloading twice, the .zip file failed to open.
So, please provide me the latest ROM. Thanks!

virgin mobile Galaxy J727P
AkashDS said:
Hi!
I am in need of latest stock ROM available for Galaxy J7 (2016) Indian variant, which should be flashable through Odin.
After last update in my phone, I could not flash the older firmware through Odin. It shows firmware binary as 3 and device binary as 4.
So, that's why I need latest firmware. I tried downloading it from Updato.com but even after downloading twice, the .zip file failed to open.
So, please provide me the latest ROM. Thanks!
Click to expand...
Click to collapse
Here is a link that mite help you !
https://www.google.com/url?sa=t&rct...6/SM-J710FN/&usg=AOvVaw3zFcqI_aPNgIdbnDkQAvjt

Thanks but its speed is 15 KB/sec. :'(

virgin mobile Galaxy J727P
AkashDS said:
Thanks but its speed is 15 KB/sec. :'(
Click to expand...
Click to collapse
sorry I can't do anything about that !!

I downloaded from SamMobile too and it was also corrupted .zip file. What the f....?

AkashDS said:
I downloaded from SamMobile too and it was also corrupted .zip file. What the f....?
Click to expand...
Click to collapse
may be u have updated with new version or new bootloader. write your old build number and what u r trying to flash now and see if I can help u by sending link for stock firmware.

CHD_2017 said:
may be u have updated with new version or new bootloader. write your old build number and what u r trying to flash now and see if I can help u by sending link for stock firmware.
Click to expand...
Click to collapse
Hi!
Yes, I was in stock ROM when I got an update and after that, baseband was updated. Since then, I'm not being able to flash the older firmware through Odin Tools.
Currently I am using debloated stock ROM (older)
Its build number is NRD90M.J710FXXU3BQJ3.
Baseband: J710FXXU4BRA2 (changed after updating)
I tried downloading ROM from Updato and SamMobile but both came out to be corrupted. I tried from PC and my phone both, so I think the upload firmware zip is corrupted.

AkashDS said:
Hi!
Yes, I was in stock ROM when I got an update and after that, baseband was updated. Since then, I'm not being able to flash the older firmware through Odin Tools.
Currently I am using debloated stock ROM (older)
Its build number is NRD90M.J710FXXU3BQJ3.
Baseband: J710FXXU4BRA2 (changed after updating)
I tried downloading ROM from Updato and SamMobile but both came out to be corrupted. I tried from PC and my phone both, so I think the upload firmware zip is corrupted.
Click to expand...
Click to collapse
Ok,
looks like u have updated your Bootloader (BL) to higher version (U4) as shown in your baseband number. You can not downgrade to lower version. Only thing you can do is to flash AP and CSC file (Do not touch BL and CP) from 4 files stock firmware with bootloader of U3. Please give me an email address here so I can send you 4 files firmware (in which there will be 4 files and out of that two files will AP and CSC). I can not write link here as XDA not allowing me to write any link here as I am "junior".

CHD_2017 said:
may be u have updated with new version or new bootloader. write your old build number and what u r trying to flash now and see if I can help u by sending link for stock firmware.
Click to expand...
Click to collapse
CHD_2017 said:
Ok,
looks like u have updated your Bootloader (BL) to higher version (U4) as shown in your baseband number. You can not downgrade to lower version. Only thing you can do is to flash AP and CSC file (Do not touch BL and CP) from 4 files stock firmware with bootloader of U3. Please give me an email address here so I can send you 4 files firmware (in which there will be 4 files and out of that two files will AP and CSC). I can not write link here as XDA not allowing me to write any link here as I am "junior".
Click to expand...
Click to collapse
Oh, thanks. Please email me on: tune.akash[at]gmail.com

Tried to downgrade device now can't get it to flash any rom

Hi, I have been trying to downgrade my s7 to 6.0.1 and I downloaded all the correct firmware files and flashed it in odin but it failed on system img.
I then tried to flash back to the latest rom and it failed on that too. So after seeking advice someone told me to check the erase nand option in odin so I did that with still no luck. I've even tried to flash the pit file for my device and nothings working...
If anyone can help or give me any pointers that would be Great, TIA.

Shaun98 said:
Hi, I have been trying to downgrade my s7 to 6.0.1 and I downloaded all the correct firmware files and flashed it in odin but it failed on system img.
I then tried to flash back to the latest rom and it failed on that too. So after seeking advice someone told me to check the erase nand option in odin so I did that with still no luck. I've even tried to flash the pit file for my device and nothings working...
If anyone can help or give me any pointers that would be Great, TIA.
Click to expand...
Click to collapse
To flash it back to your Stock Nougat Rom you have to download the correct firmware for your country, place the files in the right tabs with Odin then flash. It's very very easy and there are lots of tutorials on how to do it. If the process stops at "initialisation" then the EFS partition is corrupt and needs to be flashed first.
Also please note you cannot downgrade to an older boot loader, that means once you have upgraded to Nougat 7 the boot loader is binary 2 and you cannot downgrade it to binary 1 which is what MM uses.
The only way to flash back to a previous version of Android is to flash a custom rom with the old boot loader but it is a slightly complicated process for the beginner

Thanks I've used odin loads in the past. Just haven't had any need to for a year or so so I'm a bit behind.
I've just downloaded the right firmware again. Does it matter if the nand has been erased or that the pit file has been changed?

cooltt said:
To flash it back to your Stock Nougat Rom you have to download the correct firmware for your country, place the files in the right tabs with Odin then flash. It's very very easy and there are lots of tutorials on how to do it. If the process stops at "initialisation" then the EFS partition is corrupt and needs to be flashed first.
Also please note you cannot downgrade to an older boot loader, that means once you have upgraded to Nougat 7 the boot loader is binary 2 and you cannot downgrade it to binary 1 which is what MM uses.
The only way to flash back to a previous version of Android is to flash a custom rom with the old boot loader but it is a slightly complicated process for the beginner
Click to expand...
Click to collapse
Also is naugat and oreo the same bootloader?

Shaun98 said:
Also is naugat and oreo the same bootloader?
Click to expand...
Click to collapse
No, Nougat is binary 2 and Oreo is binary 3
---------- Post added at 02:56 PM ---------- Previous post was at 02:54 PM ----------
Shaun98 said:
Thanks I've used odin loads in the past. Just haven't had any need to for a year or so so I'm a bit behind.
I've just downloaded the right firmware again. Does it matter if the nand has been erased or that the pit file has been changed?
Click to expand...
Click to collapse
Yes, it does, its part of the EFS partition, Try flash with new firmware if no joy then you need an image of EFS partition to flash first.