Hi!
I am in need of latest stock ROM available for Galaxy J7 (2016) Indian variant, which should be flashable through Odin.
After last update in my phone, I could not flash the older firmware through Odin. It shows firmware binary as 3 and device binary as 4.
So, that's why I need latest firmware. I tried downloading it from Updato.com but even after downloading twice, the .zip file failed to open.
So, please provide me the latest ROM. Thanks!
virgin mobile Galaxy J727P
AkashDS said:
Hi!
I am in need of latest stock ROM available for Galaxy J7 (2016) Indian variant, which should be flashable through Odin.
After last update in my phone, I could not flash the older firmware through Odin. It shows firmware binary as 3 and device binary as 4.
So, that's why I need latest firmware. I tried downloading it from Updato.com but even after downloading twice, the .zip file failed to open.
So, please provide me the latest ROM. Thanks!
Click to expand...
Click to collapse
Here is a link that mite help you !
https://www.google.com/url?sa=t&rct...6/SM-J710FN/&usg=AOvVaw3zFcqI_aPNgIdbnDkQAvjt
Thanks but its speed is 15 KB/sec. :'(
virgin mobile Galaxy J727P
AkashDS said:
Thanks but its speed is 15 KB/sec. :'(
Click to expand...
Click to collapse
sorry I can't do anything about that !!
I downloaded from SamMobile too and it was also corrupted .zip file. What the f....?
AkashDS said:
I downloaded from SamMobile too and it was also corrupted .zip file. What the f....?
Click to expand...
Click to collapse
may be u have updated with new version or new bootloader. write your old build number and what u r trying to flash now and see if I can help u by sending link for stock firmware.
CHD_2017 said:
may be u have updated with new version or new bootloader. write your old build number and what u r trying to flash now and see if I can help u by sending link for stock firmware.
Click to expand...
Click to collapse
Hi!
Yes, I was in stock ROM when I got an update and after that, baseband was updated. Since then, I'm not being able to flash the older firmware through Odin Tools.
Currently I am using debloated stock ROM (older)
Its build number is NRD90M.J710FXXU3BQJ3.
Baseband: J710FXXU4BRA2 (changed after updating)
I tried downloading ROM from Updato and SamMobile but both came out to be corrupted. I tried from PC and my phone both, so I think the upload firmware zip is corrupted.
AkashDS said:
Hi!
Yes, I was in stock ROM when I got an update and after that, baseband was updated. Since then, I'm not being able to flash the older firmware through Odin Tools.
Currently I am using debloated stock ROM (older)
Its build number is NRD90M.J710FXXU3BQJ3.
Baseband: J710FXXU4BRA2 (changed after updating)
I tried downloading ROM from Updato and SamMobile but both came out to be corrupted. I tried from PC and my phone both, so I think the upload firmware zip is corrupted.
Click to expand...
Click to collapse
Ok,
looks like u have updated your Bootloader (BL) to higher version (U4) as shown in your baseband number. You can not downgrade to lower version. Only thing you can do is to flash AP and CSC file (Do not touch BL and CP) from 4 files stock firmware with bootloader of U3. Please give me an email address here so I can send you 4 files firmware (in which there will be 4 files and out of that two files will AP and CSC). I can not write link here as XDA not allowing me to write any link here as I am "junior".
CHD_2017 said:
may be u have updated with new version or new bootloader. write your old build number and what u r trying to flash now and see if I can help u by sending link for stock firmware.
Click to expand...
Click to collapse
CHD_2017 said:
Ok,
looks like u have updated your Bootloader (BL) to higher version (U4) as shown in your baseband number. You can not downgrade to lower version. Only thing you can do is to flash AP and CSC file (Do not touch BL and CP) from 4 files stock firmware with bootloader of U3. Please give me an email address here so I can send you 4 files firmware (in which there will be 4 files and out of that two files will AP and CSC). I can not write link here as XDA not allowing me to write any link here as I am "junior".
Click to expand...
Click to collapse
Oh, thanks. Please email me on: tune.akash[at]gmail.com
Related
THIS IS A COMPLETE NOOB FRIENDLY GUIDE FOR FLASHING BOOTLOADERS,MODEMS/BASEBAND.
Requirements :
A PC
USB 3.0 DATA CABLE (2.0 SHOULD WORK TOO)
ODIN 3.07 0R 3.09
NOTE3
ALSO PATIENCE
INSTRUCTIONS
NORMAL METHOD
1.Power off your phone ( Don't Restart)
2.Press Power + Volume Down + Home buttons until you see download mode .
3. Attach it your PC and open ODIN 3.07 OR 3.09
4. Select AP/PDA and ADD your .tar file or .bin file
5. START
6.It will restart itself .
Go to Settings>> About Device >> and Check Your baseband/bootloader has changed or not.
If not start the procedure again . I did it twice to make it work.
Click to expand...
Click to collapse
Always make sure KIES is disabled ... sometimes it has been known that KIES interferes with ODIN.
KHIZAR'S METHOD
If the above procedure does not work for you try this method .
1.Go to download mode from your OS restart menu,
2.Attach your phone to your PC.Let it detect your phone in download mode first.
3.Open ODIN 3.07 OR 3.09
4.SELECT AP/PDA and ADD your .tar file or .bin file.
5.Untick AutoReboot and Start
6.Then reboot manually into download mode without booting into the rom.
7.Then flash the modem/bootloader again.
8.Now power off the phone and then manually boot into your OS.
9.Check in About if baseband/bootloader has changed.
Click to expand...
Click to collapse
TRIANGLEAWAY METHOD
If the above solutions still did not work for you ...
1.If your phone is rooted , Use Triangleaway to reset your binary counter and make it fully stock.
2.Flash stock firmware using ODIN 3.07/3.09
3.Check to see if your baseband/bootloader has changed
Link to Triangleaway Below
LINK
Click to expand...
Click to collapse
NOTE : For Flashing Modems you can use CP/PHONE in odin too.
For users who do not know how to flash stock please follow this great and easy guide
LINK
Nice. Let's hope this does help users like we thought it would..
Edit- My method isn't right. You flash the first time and then manually reboot into download mode then flash the second time.
Sent From My SM-N9005 To All You Wonder Nobodies!!
do we have to be rooted to flash modem from odin? does it trip knox?
thanks
ibraahim said:
do we have to be rooted to flash modem from odin? does it trip knox?
thanks
Click to expand...
Click to collapse
You don't need to be rooted. And I don't think knox will be tripped since you aren't flashing anything that's been modified, only flashing unsigned/modified images via Odin trips knox. But since you are flazing a signed modem you should be fine.
Sent From My SM-N9005 To All You Wonder Nobodies!!
Hi,
Thanks for the guide. Very helpfull. I have a few Noob questions...
1. Do I have to do a full wipe/ cleam install after updating modem, or will the OS remain intact?
2. Where can I find the latest modem for N9005?
3. Is the latest modem always the best, or should I only update if I'm currently experiencing problems with the 'old' modem
Thanks...
wijnkuip said:
Hi,
Thanks for the guide. Very helpfull. I have a few Noob questions...
1. Do I have to do a full wipe/ cleam install after updating modem, or will the OS remain intact?
2. Where can I find the latest modem for N9005?
3. Is the latest modem always the best, or should I only update if I'm currently experiencing problems with the 'old' modem
Thanks...
Click to expand...
Click to collapse
1. No need. Just follow the guide, nothing more..
2. Check the modem thread that's in the general section, if you can't find it there then you may have to pull it from the stock FW. Also some roms devs have the modem in their OTA/OP so may wanna check there as well.
3. New isn't always better. Update if you have issues, if something isn't broken then there is no need to fix it.
Sent From My SM-N9005 To All You Wonder Nobodies!!
Downgrade from 4.4.2 to 4.3 on N9005
Is there any method to downgrade from 4.4.2 to 4.3 bootloader on N9005?
Addymore said:
Is there any method to downgrade from 4.4.2 to 4.3 bootloader on N9005?
Click to expand...
Click to collapse
Like it's been mentioned everywhere it's NOT possible to downgrade from KK BL to JB BL on the N9005...
Sent From My SM-N9005 To All You Wonder Nobodies!!
with the current modem/firmware/bootloader (I don't know what gives me the issue) I cannot use LTE while I have an SM-N9005 and friend of mine with unrooted Note 3 (bought in a shop in our country) has LTE 4g, while I have an Italian CSC.
If I use a modem from an other rom, will I have LTE as well and still have my Knox intact?
Thanks a lot guys
Your threat was a live saver man. For a sec I thought I lost my phone. Flashed modems b 4 but thanks to u I got reminded to use the new Odin(stupid me used the old one).
z3x baseband
Just a quick question , im about to buy a z3x box I was wondering if it repairs baseband s/n and imei on n9005 my phone reads null/null imei unknown baseband and a wild serial number, many thanks
4.3 Modem on kitkat
Can I flash 4.3 modem on Kitkat ?
I'm having unknown baseband issue after updating to kitkat on n9005.
MuhammadZeeshan7 said:
Can I flash 4.3 modem on Kitkat ?
I'm having unknown baseband issue after updating to kitkat on n9005.
Click to expand...
Click to collapse
You cannot go back to old bootloader once you are on KitKat, try flashing a new firmware.....
My phone currently is running the KOT49H.N9005DXUGNH1 rom, but i have a need to flash the N900XXUDNC1 modem. Can I do that?
nice one thanks
@fahadali2315 a suggestion from my side, why don't you include this link for latest bootloaders - https://www.androidfilehost.com/?w=files&flid=12697
and this link for latest modems - http://forum.xda-developers.com/galaxy-note-3/general/ref-galaxy-note-3-sm-n9005-gsm-modems-t2842806
Why do i have a fail in auth error when i want to change the bootloader?, i just get a fail message :/
Lyon888 said:
Why do i have a fail in auth error when i want to change the bootloader?, i just get a fail message :/
Click to expand...
Click to collapse
Are you Flashing the Full Firmware to update the bootloader?
Are you Flashing the Correct Firmware for your Carrier and Device?
Your Device is in Download Mode?
USB Debugging is enabled?
You Have the Samsung Drivers installed on your pc?
If the answers to the above is Yes - Try a different USB cable and Port on your pc
Sent From my SM-N910W8 using Tapatalk
Thanks for your answer . Do i have to flash a full firmware and the bootlader at the same time?, cause i just use the bootloader zip to flash.
Lyon888 said:
Thanks for your answer . Do i have to flash a full firmware and the bootlader at the same time?, cause i just use the bootloader zip to flash.
Click to expand...
Click to collapse
I'd personally flash the full Firmware - Benefits... Updated bootloader - Updated Modem & Any associated "fixes".
Sent From my SM-N910W8 using Tapatalk
Hi,
I have a G920F, I was rooted and want to go to stock again. I have restored the device with Smart Switch, but now I am unable to flash any other rom. I have downloaded 3 different roms from Sammobile and get sw. check failed device 3 binary 2 at everyone. The current rom is form Italy Wind the latest OI9. Any suggestions?
Thanks in advance.
Hi, probably you trying to install oldest firmware 5.0.1, download the latest firmware and try again. You are with 5.1, right? This error on odin happens, because you cannot downgrade the firmware. Hope this helps.
I think you can not downgrade even if it is the same Android version.
If it detects you are on a newer bootloader it will give you that error.
What I belive you can do is to extract the bootloader (sboot) and modem from the .tar file and flash ONLY the system through Odin.
Don't know exactly how to do that because I haven't done it but I think that would do; you will have to search and read my friend.
You will have the stock firmware but with latest bootloader and modem.
Hope this helps.
Note: As far as I know this will work if its the same Andorid version; you can not have Android 5.0.2 with 5.1.1 bootloader.
jpdediego said:
I think you can not downgrade even if it is the same Android version.
If it detects you are on a newer bootloader it will give you that error.
What I belive you can do is to extract the bootloader (sboot) and modem from the .tar file and flash ONLY the system through Odin.
Don't know exactly how to do that because I haven't done it but I think that would do; you will have to search and read my friend.
You will have the stock firmware but with latest bootloader and modem.
Hope this helps.
Note: As far as I know this will work if its the same Andorid version; you can not have Android 5.0.2 with 5.1.1 bootloader.
Click to expand...
Click to collapse
Hi,
I have tried what you said, but no succes. The firmware was already recovered with smart switch so the bootloader is the latest.
raj_p said:
Hi,
I have tried what you said, but no succes. The firmware was already recovered with smart switch so the bootloader is the latest.
Click to expand...
Click to collapse
But did you try to flash without the bootloader and modem?
I brought ( sm-g9550 ) .android 7.0 is running But it doesn't get OTA update ...
I tried to update android 8.0 with Odin 3.13.1 version but it's showes me (sha256 is invalid ).then I tried sha modified Odin but after 0.02 secend it's show pass but doesn't change anything my phone is opened with old firmware.
Then I tried with Odin 3.13.1_3B_patched but it's show me secured pit failed .......
How to flash now to android 8.0 .....
Please help me...
Udaydas88 said:
I brought ( sm-g9550 ) .android 7.0 is running But it doesn't get OTA update ...
I tried to update android 8.0 with Odin 3.13.1 version but it's showes me (sha256 is invalid ).then I tried sha modified Odin but after 0.02 secend it's show pass but doesn't change anything my phone is opened with old firmware.
Then I tried with Odin 3.13.1_3B_patched but it's show me secured pit failed .......
How to flash now to android 8.0 .....
Please help me...
Click to expand...
Click to collapse
Where did you get the Firmware? Sammobile.com is always reliable ?
Sent from my Galaxy S9+ using XDA Labs
shaggyskunk said:
Where did you get the Firmware? Sammobile.com is always reliable ?
Click to expand...
Click to collapse
I download from sammobile.com
i also tried second latest firmware but same problem
Udaydas88 said:
I download from sammobile.com
i also tried second latest firmware but same problem
Click to expand...
Click to collapse
Are you sure that you downloaded the correct firmware for your device and Carrier? And where did you get Odin? If you didn't get it from sammobile.com it may be bugged? Never had any issues with sammobile.com - You have Samsung USB Drivers installed on your computer?
shaggyskunk said:
Are you sure that you downloaded the correct firmware for your device and Carrier? And where did you get Odin? If you didn't get it from sammobile.com it may be bugged? Never had any issues with sammobile.com - You have Samsung USB Drivers installed on your computer?
Click to expand...
Click to collapse
I downloaded this odin from odindownload.com (i update my s7 edge with this odin) but this time i faced this type of problem, i also tried others odin but it's not working....??
Udaydas88 said:
I downloaded this odin from odindownload.com (i update my s7 edge with this odin) but this time i faced this type of problem, i also tried others odin but it's not working....??
Click to expand...
Click to collapse
Get Odin from sammobile.com and use it ?
Sent from my Galaxy S9+ using XDA Labs
shaggyskunk said:
Get Odin from sammobile.com and use it ?
Click to expand...
Click to collapse
This time i download from sammobile.com but its show me sha256 is invalid ..... what i do now? help me:crying:
Did you ever get this fixed? Having the exact same issue. Galaxy S8+ running on 7... cannot do OTA and flashing gives the same errors in ODIN.... SHA256 on standard ODIN (tried multiple versions) and the patched one give the PIT error.... at a loss with this. FW is up to 9 now for this model.
Hello guys. İ am new here and ı dont know how can ı use. İ need help for A530F device. İ rooted this phone and I wanted unroot. İ downloaded odin files and upload to device. Device has not opened when ı upload AP\CSC\CP\BL. But when ı upload just AP device starting but S\N and IMEI unknown. How can ı fix. Pls help me. ( Sorry for my English.)
You have to flash the latest firmware for your device. Failures such as yours are due to old bootloader/modem. They're older than the one on your device.
AP does contain system files and recovery, so it'll flash just fine. You need to find out what your actual modem version is, so you can flash a more recent one, if found.
If you can provide more information about your firmware, it'll help us help you.
Firstly, what it means flash.
I have already downloaded latest version (A530FXXULCUI1 TUR). But device not open.
Bulldozer74 said:
Firstly, what it means flash.
I have already downloaded latest version (A530FXXULCUI1 TUR). But device not open.
Click to expand...
Click to collapse
Flash means to install something through the recovery. Or Odin.
Can you flash the modem (CP) alone? Using Odin? Can you flash the bootloader (BL) alone?
If it does flash successfully, you should receive your signal back. Unless you have a problem with your EFS partition.
Mohamedkam000 said:
Flash means to install something through the recovery. Or Odin.
Can you flash the modem (CP) alone? Using Odin? Can you flash the bootloader (BL) alone?
If it does flash successfully, you should receive your signal back. Unless you have a problem with your EFS partition.
Click to expand...
Click to collapse
When ı flashed (cp) alone ıt is not opening. Just opening with AP. İnteresting.
Bulldozer74 said:
When ı flashed (cp) alone ıt is not opening. Just opening with AP. İnteresting.
Click to expand...
Click to collapse
And actually ıt has 64GB rom but after ı flashed ıt was 16 GB
so i can not find a firmware file for my SM-J260A on binary 6 i only can can find the engineer file can i get some with this please
MaxTheSonicFan said:
so i can not find a firmware file for my SM-J260A on binary 6 i only can can find the engineer file can i get some with this please
Click to expand...
Click to collapse
you can just google the model number and add firmware at the end....
could it be this firmware file?
Confirm before flashing!
Samsung SM-J260A Stock Firmware ROM (Flash File)
Download the official Samsung SM-J260A Stock Firmware ROM (Flash File) for your Samsung Mobile. We also provide all other Samsung Stock Firmware for free.
firmwarefile.com
monsiu said:
you can just google the model number and add firmware at the end....
could it be this firmware file?
Confirm before flashing!
Samsung SM-J260A Stock Firmware ROM (Flash File)
Download the official Samsung SM-J260A Stock Firmware ROM (Flash File) for your Samsung Mobile. We also provide all other Samsung Stock Firmware for free.
firmwarefile.com
Click to expand...
Click to collapse
when i try to flash i get SW REV CHECK FAIL BOOTLOADER DEVICE 6 BINARY 2
monsiu said:
you can just google the model number and add firmware at the end....
could it be this firmware file?
Confirm before flashing!
Samsung SM-J260A Stock Firmware ROM (Flash File)
Download the official Samsung SM-J260A Stock Firmware ROM (Flash File) for your Samsung Mobile. We also provide all other Samsung Stock Firmware for free.
firmwarefile.com
Click to expand...
Click to collapse
okay after 5 hoers i fond it on https://www.agfirmwarefile.com its 5 in the moning im going to bed
MaxTheSonicFan said:
okay after 5 hoers i fond it on https://www.agfirmwarefile.com its 5 in the moning im going to bed
Click to expand...
Click to collapse
Thank you for taking the time to find this. I literally spent hours trying to find the firmware for my SM-J260A and came up with nothing.