Hi,
I rooted successfully my galasy ace plus(s7500),
Having CWM 5.5.0.4 I rtyed to flash from Gingerbread to kitkat 4.4 speedMod Rom and CM10 JB but encountered same problem,
After wipping data/cash/davlk ,
I installed via zip file: Rom + GAAP but when i reboot at finish,
The phone waking up showing SAMSUNG logo turning white and whiter till the screen is colmpletle white and it just stays like that until i pull out the battery...
the phone wont startup!
then restored successfully from backup...
please help!
good:
pop up
I had the same problem and i tried two custom roms but it didn't work
and even when i tried to flash CWM 6.0.4.7 and when i entered to CWM it presented the same problem
please devs we want help
download and flash official firmware from sammobile with odin and see what happen.
Zaraee said:
download and flash official firmware from sammobile with odin and see what happen.
Click to expand...
Click to collapse
1. why would it help? I successfully restored from backup and phone is up&running.. problem happens after flashing custom rom...
2. how can i know witch firmware to download?
my country dosen't appear in the list...
I found few other countries with the same "MODEM" -S7500XXLB1 as in setting->about phone-> "Baseband"
how can i match PDA, CSC to my current phone?
what are they mean?
Thanks,
Dotan
dotan9222 said:
1. why would it help? I successfully restored from backup and phone is up&running.. problem happens after flashing custom rom...
2. how can i know witch firmware to download?
my country dosen't appear in the list...
I found few other countries with the same "MODEM" -S7500XXLB1 as in setting->about phone-> "Baseband"
how can i match PDA, CSC to my current phone?
what are they mean?
Thanks,
Dotan
Click to expand...
Click to collapse
1. if any problem occured it's the best to flash stock rom..and remember before flashing custom rom for cm or speedmod sometime you need to wipe system for best result.
2. if your country is not listed, dial *#1234# and check your PDA. XX mean for German and LB1 is your firmware version.
CSC is sales code.
Zaraee said:
1. if any problem occured it's the best to flash stock rom..and remember before flashing custom rom for cm or speedmod sometime you need to wipe system for best result.
2. if your country is not listed, dial *#1234# and check your PDA. XX mean for German and LB1 is your firmware version.
CSC is sales code.
Click to expand...
Click to collapse
Is there a way to solve this without flashing the stock rom . Because the stock is in rapidgator and terafile.
If there isn't and I get stock instaled in my phone in a samsung store will ir work. I'm from India So they will flash INU or INS
DayanGts7500 said:
Is there a way to solve this without flashing the stock rom . Because the stock is in rapidgator and terafile.
If there isn't and I get stock instaled in my phone in a samsung store will ir work. I'm from India So they will flash INU or INS
Click to expand...
Click to collapse
you can try any custom rom from gingerbread..as we know ICS/JB/KITKAT are not stable for our ace plus
DayanGts7500 said:
Is there a way to solve this without flashing the stock rom . Because the stock is in rapidgator and terafile.
If there isn't and I get stock instaled in my phone in a samsung store will ir work. I'm from India So they will flash INU or INS
Click to expand...
Click to collapse
u r from assam right.. we have official firmware on sammobile for india
dotan9222 said:
1. why would it help? I successfully restored from backup and phone is up&running.. problem happens after flashing custom rom...
2. how can i know witch firmware to download?
my country dosen't appear in the list...
I found few other countries with the same "MODEM" -S7500XXLB1 as in setting->about phone-> "Baseband"
how can i match PDA, CSC to my current phone?
what are they mean?
Thanks,
Dotan
Click to expand...
Click to collapse
Maybe you already solved the problem but just so you know:
Indian firmware has a certain bug which causes white screen issues when flashing custom rom
Then, flash a stock rom from a different country no matter if english or french or whatever (it has to be European as there are reports of the bug on arabic and chinese firmwares too)
Androidoo said:
u r from assam right.. we have official firmware on sammobile for india
Click to expand...
Click to collapse
I flashed the official Indian firmware that didn't worked. I also tried csc of Indonesia, Nepal and few other countrys .nothing worked.
---------- Post added at 11:20 PM ---------- Previous post was at 11:13 PM ----------
ShadowsDie said:
Maybe you already solved the problem but just so you know:
Indian firmware has a certain bug which causes white screen issues when flashing custom rom
Then, flash a stock rom from a different country no matter if english or french or whatever (it has to be European as there are reports of the bug on arabic and chinese firmwares too)
Click to expand...
Click to collapse
Is there a mediafire (something similar) link to European stock because I can't download from rapidgator and terafile .
DayanGts7500 said:
I flashed the official Indian firmware that didn't worked. I also tried csc of Indonesia, Nepal and few other countrys .nothing worked.
---------- Post added at 11:20 PM ---------- Previous post was at 11:13 PM ----------
Is there a mediafire (something similar) link to European stock because I can't download from rapidgator and terafile .
Click to expand...
Click to collapse
sammobile, make account, log in, http://www.sammobile.com/firmwares/3/?download=13383
dude i flashed stock no such problems..indian firmware
Androidoo said:
dude i flashed stock no such problems..indian firmware
Click to expand...
Click to collapse
Really never worked for me. what was the basebrand .??
DayanGts7500 said:
Really never worked for me. what was the basebrand .??
Click to expand...
Click to collapse
ddme1 the updaate of 6th july 2013 on sammobile
Androidoo said:
ddme1 the updaate of 6th july 2013 on sammobile
Click to expand...
Click to collapse
Ok will check today. Thanks
ShadowsDie said:
sammobile, make account, log in, http://www.sammobile.com/firmwares/3/?download=13383
Click to expand...
Click to collapse
Hiee bro I did. Flash this and got an error in flashing fat.bin I googled and realize what the problem is. They said I can only flash my owm countrys frimware. Then how other indian people using kit kat.
DayanGts7500 said:
Hiee bro I did. Flash this and got an error in flashing fat.bin I googled and realize what the problem is. They said I can only flash my owm countrys frimware. Then how other indian people using kit kat.
Click to expand...
Click to collapse
dude u need to flash this speed mod version 2.5... thats the only kitkat for ace plus and has buggs
DayanGts7500 said:
Hiee bro I did. Flash this and got an error in flashing fat.bin I googled and realize what the problem is. They said I can only flash my owm countrys frimware. Then how other indian people using kit kat.
Click to expand...
Click to collapse
i have no idea what to tell you
try formatting system partition before flashing european
ShadowsDie said:
i have no idea what to tell you
try formatting system partition before flashing european
Click to expand...
Click to collapse
I did. that didn't work . I will try the Indian one tomorrow. I have a question by the way, my download mode part contains the indian frimware nd the pda and phone contains Thailand frimware because ot titrions custom rom so.
Related
I have n8000 with root, iam on GB 4.1.2, build CMA2
I want to know how to unroot to get the latest update and then reroot again without loosing my settings and apps
thermax04 said:
I have n8000 with root,
I want to know how to unroot to get the latest update and then reroot again without loosing my settings and apps
Click to expand...
Click to collapse
You could get better help if you would have included your country and the firmware or build number that your current using.
With that said.... goto samfirmware and download the latest firmware for your device. Then use odin to flash the firmware, you should then have latest update and you can then root again.
There are other methodes but I think this is the least complicated.
kkretch said:
You could get better help if you would have included your country and the firmware or build number that your current using.
With that said.... goto samfirmware and download the latest firmware for your device. Then use odin to flash the firmware, you should then have latest update and you can then root again.
There are other methodes but I think this is the least complicated.
Click to expand...
Click to collapse
my note details is added
I know your method and used it a lot via mobile odin, but I used to keep the
root from options, and iam not sure if the new firmware will wipe my note or not if I flash it via odin pc
I read that flashing the stock recovery will unroot it.
I read that flashing the stock recovery will unroot it.
Flashing stock rom removes root .
But latest updates are more likely on XDA or sammobile before Kies or OTA .
thermax04 said:
my note details is added
I know your method and used it a lot via mobile odin, but I used to keep the
root from options, and iam not sure if the new firmware will wipe my note or not if I flash it via odin pc
I read that flashing the stock recovery will unroot it.
Click to expand...
Click to collapse
I see your updated info except for country that you live in. You may have the newest for your country.
Yes, flashing a new firmware with PC Odin will remove root,.
I have not done it in a while but from what I remember all data remains in tack, just don't do a factory reset.
I do believe that there is a way to install a factory firmware in mobile Odin and keep root but I have never done that method.
.
JJEgan said:
I read that flashing the stock recovery will unroot it.
Flashing stock rom removes root .
But latest updates are more likely on XDA or sammobile before Kies or OTA .
Click to expand...
Click to collapse
unrooting will open OTA update to update the device with 70-80 mb rather than downloading 1 gb
kkretch said:
I see your updated info except for country that you live in. You may have the newest for your country.
Yes, flashing a new firmware with PC Odin will remove root,.
I have not done it in a while but from what I remember all data remains in tack, just don't do a factory reset.
I do believe that there is a way to install a factory firmware in mobile Odin and keep root but I have never done that method.
.
Click to expand...
Click to collapse
iam in Egypt but device from Saudi , and yes there is update called CMF2 rather than what I have now CMA2, while both of them are android 4.1.2
please look at my previous reply to know that iam looking to download 70mb instead of 1gb
thermax04 said:
iam in Egypt but device from Saudi , and yes there is update called CMF2 rather than what I have now CMA2, while both of them are android 4.1.2
please look at my previous reply to know that iam looking to download 70mb instead of 1gb
Click to expand...
Click to collapse
You could try to un-root with Galaxy Note 10.1 ToolKit, read about it here and then do your update
kkretch said:
You could try to un-root with Galaxy Note 10.1 ToolKit, read about it here and then do your update
Click to expand...
Click to collapse
looks like it is full of option, will read about it first
Please help im on 5.1.1 custom rom, I tried to install the XEF marshmallow but odin gives me "fail"
and now i can't start my phone.
Please help, how to flash it correctly?
Wipe everything, put in download mode, connect to Odin, flash 5.1.1 XEF first and then update via OTA
Are we gods to know what are you doin... poSt odin fail logs
.I have the France (SFR) 5.1.1 firmware currently...(G920FXXU3COI9). Can I install the France (XEF) 6.0.1 G920FXXU3DPAD version? WIll there be any issues?
Connect the phone to smart switch and revert to original firmware, after that you can flash 6.0.1 with Odin.
termdj said:
.I have the France (SFR) 5.1.1 firmware currently...(G920FXXU3COI9). Can I install the France (XEF) 6.0.1 G920FXXU3DPAD version? WIll there be any issues?
Click to expand...
Click to collapse
No...
lummujaj said:
No...
Click to expand...
Click to collapse
why you say no?
you can do it with odin as other methods.
iniassio said:
why you say no?
you can do it with odin as other methods.
Click to expand...
Click to collapse
I said no about issues !!
I flashed it and everything works fine. I see a lot of people clears memory/data/cash in recovery mode after installation. Is it necessary if everything works fine on my phone?
termdj said:
I flashed it and everything works fine. I see a lot of people clears memory/data/cash in recovery mode after installation. Is it necessary if everything works fine on my phone?
Click to expand...
Click to collapse
if everything seems to work and you are satisfied, don`t do anything..although you can clear cache without anything happening to your phone.
thnx
I have a samsung j7 (j7ooh) and flashed the enigma rom by allooosh98, after flashing the rom my imei got changed into 350000000006 and it shows emergency calls only, everytime i try to register it into a network it says can't register into a network, i reverted back to stock firmware but it did'nt fix the issues, and I forgot to make a back up after flashing the enigma rom, so i dont have the back up for efs and radio, so i kindly ask for help or suggestions on how i can fix it, and if someone with galaxy j7 (700h) could give a back up of their efs and radio i would be greatful, thank you.
Give SmartSwitch a try.
Sent from my SM-A720F using Tapatalk
Thank you for your reply,..i already tried using smart switch but it did'nt work
Use odin and flash stock rom with some odin options tick...
1). Re-partition
2).Nand Erase all
and then go to pit tab
download the pit file for your model here and load into odin. ( J700H odin file)
and flash the ROM.
your phone will be like new. With 100% original IMEI restore.
Give me a thanks!! :good::good::good:
Worked for me !!
thanks bro....
ydvanil said:
Use odin and flash stock rom with some odin options tick...
1). Re-partition
2).Nand Erase all
and then go to pit tab
download the pit file for your model here and load into odin. ( J700H odin file)
and flash the ROM.
your phone will be like new. With 100% original IMEI restore.
Give me a thanks!! :good::good::good:
Click to expand...
Click to collapse
Hi Sir,
I am facing similar issue but I have J7 2016 Model. SM-J710FN
Do you have PIT file for that?
Please share if you do
Thanks in advance
Pit file for J710FN
jumbobombo said:
Hi Sir,
I am facing similar issue but I have J7 2016 Model. SM-J710FN
Do you have PIT file for that?
Please share if you do
Thanks in advance
Click to expand...
Click to collapse
Download here
Hit Thanks
ydvanil said:
Use odin and flash stock rom with some odin options tick...
1). Re-partition
2).Nand Erase all
and then go to pit tab
download the pit file for your model here and load into odin. ( J700H odin file)
and flash the ROM.
your phone will be like new. With 100% original IMEI restore.
Give me a thanks!! :good::good::good:
Click to expand...
Click to collapse
ydvanil said:
Download here
Hit Thanks
Click to expand...
Click to collapse
Hey,
Thanks for your reply
I tried this method to return to full stock but I am not able to flash new firmware via Odin
I've posted the problem in a thread.
https://forum.xda-developers.com/galaxy-j7/help/j7-2016-sm-j710fn-restore-to-stock-odin-t3630811
Please help me if you have any solution
Thanks in advance
Either you're flashing wrong Rom or trying to downgrade.
jumbobombo said:
Hey,
Thanks for your reply
I tried this method to return to full stock but I am not able to flash new firmware via Odin
I've posted the problem in a thread.
https://forum.xda-developers.com/galaxy-j7/help/j7-2016-sm-j710fn-restore-to-stock-odin-t3630811
Please help me if you have any solution
Thanks in advance
Click to expand...
Click to collapse
Please share your last Android version.
Phone model
country name
I'll provide you links then download and try that firmware.
ydvanil said:
Please share your last Android version.
Phone model
country name
I'll provide you links then download and try that firmware.
Click to expand...
Click to collapse
Thanks so much
Android version 6.0.1
Phone model Samsung Galaxy J7 2016 SM-J710FN
Country India
This is latest firmware for your J710FN.
Download it and then flash it'll be flash without any problem.
Download Here
---------- Post added at 10:46 AM ---------- Previous post was at 10:45 AM ----------
jumbobombo said:
Thanks so much
Android version 6.0.1
Phone model Samsung Galaxy J7 2016 SM-J710FN
Country India
Click to expand...
Click to collapse
Download it and then flash it'll be flash without any problem.
Download Here
ydvanil said:
Download it and then flash it'll be flash without any problem.
Download Here
---------- Post added at 10:46 AM ---------- Previous post was at 10:45 AM ----------
Download it and then flash it'll be flash without any problem.
Download Here
Click to expand...
Click to collapse
I am getting same cm.bin error in this rom
Download mode of my phone shows sm-j710f so I downloaded a rom of SM-J710F and flashed using Odin and it worked
On the phone box the model says SM-J710FN but the actual model of the phone I guess is SM-J710F
Anyways thankfully I am on complete stock now but the first boot image is still of Samsung Galaxy S8. The image that shows when you first switch on the phone.
It is from the supernova rom that I had flashed.
I don't know who this didn't change back to stock :crying:
And now I don't even have root to change it back
Do you have any suggestion?
Thanks in advance
You need Flash boot image Manually
jumbobombo said:
I am getting same cm.bin error in this rom
Download mode of my phone shows sm-j710f so I downloaded a rom of SM-J710F and flashed using Odin and it worked
On the phone box the model says SM-J710FN but the actual model of the phone I guess is SM-J710F
Anyways thankfully I am on complete stock now but the first boot image is still of Samsung Galaxy S8. The image that shows when you first switch on the phone.
It is from the supernova rom that I had flashed.
I don't know who this didn't change back to stock :crying:
And now I don't even have root to change it back
Do you have any suggestion?
Thanks in advance
Click to expand...
Click to collapse
Stock rom package doesn't include the boot image, you can flash it manually through twrp
look for boot animation for your phone you'll find, then you can flash it via twrp.
or
use rom tool box/flashify to flash the boot image package.
ydvanil said:
Stock rom package doesn't include the boot image, you can flash it manually through twrp
look for boot animation for your phone you'll find, then you can flash it via twrp.
or
use rom tool box/flashify to flash the boot image package.
Click to expand...
Click to collapse
Yes but I am not rooted now and with Samsung recovery.
I do not want to root since that will increase my warranty void counter.
Right now the counter is on 1
Any other work around?
Flash This
jumbobombo said:
I am getting same cm.bin error in this rom
Download mode of my phone shows sm-j710f so I downloaded a rom of SM-J710F and flashed using Odin and it worked
On the phone box the model says SM-J710FN but the actual model of the phone I guess is SM-J710F
Anyways thankfully I am on complete stock now but the first boot image is still of Samsung Galaxy S8. The image that shows when you first switch on the phone.
It is from the supernova rom that I had flashed.
I don't know who this didn't change back to stock :crying:
And now I don't even have root to change it back
Do you have any suggestion?
Thanks in advance
Click to expand...
Click to collapse
J7 boot Animation
Flash this Download here
---------- Post added at 07:04 PM ---------- Previous post was at 06:59 PM ----------
jumbobombo said:
Yes but I am not rooted now and with Samsung recovery.
I do not want to root since that will increase my warranty void counter.
Right now the counter is on 1
Any other work around?
Click to expand...
Click to collapse
If the counter is 1 you're already out of warranty.
There's no other way to change boot animation.
And you can even change boot animation with samsung recovery, If you're rooted.
Network not registered
ydvanil said:
Use odin and flash stock rom with some odin options tick...
1). Re-partition
2).Nand Erase all
and then go to pit tab
d
and flash the ROM.
your phone will be like new. With 100% original IMEI restore.
Give me a thanks!! :good::good::good:
Click to expand...
Click to collapse
hello sir,
I have samsung j7 sm-g610f please give me a link where i can get the pit file. I need to fix this problem too.
Thank you in advance
Network doesn't work / not registered
I have same problem too
my samsung SM-J710FN/DS,
i tried flash it with stock ROM from India, but it failed.
if you could help me to find stock ROM from my region, it would be helpful..
it is Indonesia Region..
Thanks in advance !
hello guys , i need help i can't use network always telling me not registred on network i have a j7 prime sm-g610f i flashed it and now i have this problem , i am using android version 6.0.1 model j7 prime sm-g610f country tunisia . Please help me thanks
Hi, i just want to kniw that if is it possible to change my korean c9 pro to c9 pro ituer country C9000 to C900F.
I tried to flash through ODIN but get error on PIT file and re partition.
Any help will br much appreciated...
I don't undestend, what version do you have and what version do you want
Trimis de pe al meu SM-C9000 folosind Tapatalk
no all you can do is flash another countries rom and integrate that csc in to it.
He want to change is phone?
Trimis de pe al meu SM-C9000 folosind Tapatalk
Hey guys i somehow researched alot and able to figure it out..
I install other country firmware like i did
My c9 pro model have C9000 and i install C900F country firmware but now
My wifi is not working then i tried to flash csc that other country flash file have but it didn't work. I also tried to flash his bootloader but failed.. and i will go back to my hong kong firmware.
Any help??
Essa Khan XcoDeR said:
Hey guys i somehow researched alot and able to figure it out..
I install other country firmware like i did
My c9 pro model have C9000 and i install C900F country firmware but now
My wifi is not working then i tried to flash csc that other country flash file have but it didn't work. I also tried to flash his bootloader but failed.. and i will go back to my hong kong firmware.
Any help??
Click to expand...
Click to collapse
Flash @travis82 kernel here
i got this error
Updater process ended with ERROR: 7
Error installing zip file '/usb-otg/c9000_HKROM_KERNEL_v3.3'
Checking for MD5 file...
This package is for "c9ltechn" devices; this is a c9lte
Maybe if I get enough requests I'll wip up a C9lte kernel for the indian and tw variant. Depends on how many need/want it.
travis82 said:
Maybe if I get enough requests I'll wip up a C9lte kernel for the indian and tw variant. Depends on how many need/want it.
Click to expand...
Click to collapse
Please..... do it
After that kernel wifi will work?
C900F test kernel: I do not have this device so kinda have to guess here. https://drive.google.com/open?id=0B6pe-bp68gMkbnVNRk91V1RkT2M
thank you so much man it worked now thaaaaankuuuuuu
why my phone storage is 16GB?
beats me your storage is same as ours it should be correct. Maybe try formatting sdcard? Glad kernel worked for you.
travis82 said:
beats me your storage is same as ours it should be correct. Maybe try formatting sdcard? Glad kernel worked for you.
Click to expand...
Click to collapse
thanks buddy for the kernel and i just factory restore my set lets see about storage
how did you flash c900f rom on c9000
shreyash133 said:
how did you flash c900f rom on c9000
Click to expand...
Click to collapse
I flashed with indian stock fimware downloaded from sammobile. The firmware will comes with 5 files only flash AP file. And after that use travis kernel if wifi wont work. And last thing if it shows you that your phone storage is 16gb i will tell you the steps
Beaware KNOX gonna triggered and your warranty will void.
If you need stock file whom i flashed my C9000 tell me i upload it for you at mega or google drive.
16gb space fixed maybe need to use c900f csc and repartition it. Just what i was thinking off the top of my head. Why have none of you put out a C900F rom yet?
How to flash kernel ?
I flash c900f rom on c9000 everything working great
Except Wi-Fi plz help and thnk you
Plz help for Wi-Fi and m not able to flash kernel
How did you flash kernel plz help
Wifi is not working plz help
Hi!
I am in need of latest stock ROM available for Galaxy J7 (2016) Indian variant, which should be flashable through Odin.
After last update in my phone, I could not flash the older firmware through Odin. It shows firmware binary as 3 and device binary as 4.
So, that's why I need latest firmware. I tried downloading it from Updato.com but even after downloading twice, the .zip file failed to open.
So, please provide me the latest ROM. Thanks!
virgin mobile Galaxy J727P
AkashDS said:
Hi!
I am in need of latest stock ROM available for Galaxy J7 (2016) Indian variant, which should be flashable through Odin.
After last update in my phone, I could not flash the older firmware through Odin. It shows firmware binary as 3 and device binary as 4.
So, that's why I need latest firmware. I tried downloading it from Updato.com but even after downloading twice, the .zip file failed to open.
So, please provide me the latest ROM. Thanks!
Click to expand...
Click to collapse
Here is a link that mite help you !
https://www.google.com/url?sa=t&rct...6/SM-J710FN/&usg=AOvVaw3zFcqI_aPNgIdbnDkQAvjt
Thanks but its speed is 15 KB/sec. :'(
virgin mobile Galaxy J727P
AkashDS said:
Thanks but its speed is 15 KB/sec. :'(
Click to expand...
Click to collapse
sorry I can't do anything about that !!
I downloaded from SamMobile too and it was also corrupted .zip file. What the f....?
AkashDS said:
I downloaded from SamMobile too and it was also corrupted .zip file. What the f....?
Click to expand...
Click to collapse
may be u have updated with new version or new bootloader. write your old build number and what u r trying to flash now and see if I can help u by sending link for stock firmware.
CHD_2017 said:
may be u have updated with new version or new bootloader. write your old build number and what u r trying to flash now and see if I can help u by sending link for stock firmware.
Click to expand...
Click to collapse
Hi!
Yes, I was in stock ROM when I got an update and after that, baseband was updated. Since then, I'm not being able to flash the older firmware through Odin Tools.
Currently I am using debloated stock ROM (older)
Its build number is NRD90M.J710FXXU3BQJ3.
Baseband: J710FXXU4BRA2 (changed after updating)
I tried downloading ROM from Updato and SamMobile but both came out to be corrupted. I tried from PC and my phone both, so I think the upload firmware zip is corrupted.
AkashDS said:
Hi!
Yes, I was in stock ROM when I got an update and after that, baseband was updated. Since then, I'm not being able to flash the older firmware through Odin Tools.
Currently I am using debloated stock ROM (older)
Its build number is NRD90M.J710FXXU3BQJ3.
Baseband: J710FXXU4BRA2 (changed after updating)
I tried downloading ROM from Updato and SamMobile but both came out to be corrupted. I tried from PC and my phone both, so I think the upload firmware zip is corrupted.
Click to expand...
Click to collapse
Ok,
looks like u have updated your Bootloader (BL) to higher version (U4) as shown in your baseband number. You can not downgrade to lower version. Only thing you can do is to flash AP and CSC file (Do not touch BL and CP) from 4 files stock firmware with bootloader of U3. Please give me an email address here so I can send you 4 files firmware (in which there will be 4 files and out of that two files will AP and CSC). I can not write link here as XDA not allowing me to write any link here as I am "junior".
CHD_2017 said:
may be u have updated with new version or new bootloader. write your old build number and what u r trying to flash now and see if I can help u by sending link for stock firmware.
Click to expand...
Click to collapse
CHD_2017 said:
Ok,
looks like u have updated your Bootloader (BL) to higher version (U4) as shown in your baseband number. You can not downgrade to lower version. Only thing you can do is to flash AP and CSC file (Do not touch BL and CP) from 4 files stock firmware with bootloader of U3. Please give me an email address here so I can send you 4 files firmware (in which there will be 4 files and out of that two files will AP and CSC). I can not write link here as XDA not allowing me to write any link here as I am "junior".
Click to expand...
Click to collapse
Oh, thanks. Please email me on: tune.akash[at]gmail.com