Database Info

[Q] troubles booting after Flashing ANY ROM

Hi,
I rooted successfully my galasy ace plus(s7500),
Having CWM 5.5.0.4 I rtyed to flash from Gingerbread to kitkat 4.4 speedMod Rom and CM10 JB but encountered same problem,
After wipping data/cash/davlk ,
I installed via zip file: Rom + GAAP but when i reboot at finish,
The phone waking up showing SAMSUNG logo turning white and whiter till the screen is colmpletle white and it just stays like that until i pull out the battery...
the phone wont startup!
then restored successfully from backup...
please help!
good:

pop up

I had the same problem and i tried two custom roms but it didn't work
and even when i tried to flash CWM 6.0.4.7 and when i entered to CWM it presented the same problem
please devs we want help

download and flash official firmware from sammobile with odin and see what happen.

Zaraee said:
download and flash official firmware from sammobile with odin and see what happen.
Click to expand...
Click to collapse
1. why would it help? I successfully restored from backup and phone is up&running.. problem happens after flashing custom rom...
2. how can i know witch firmware to download?
my country dosen't appear in the list...
I found few other countries with the same "MODEM" -S7500XXLB1 as in setting->about phone-> "Baseband"
how can i match PDA, CSC to my current phone?
what are they mean?
Thanks,
Dotan

dotan9222 said:
1. why would it help? I successfully restored from backup and phone is up&running.. problem happens after flashing custom rom...
2. how can i know witch firmware to download?
my country dosen't appear in the list...
I found few other countries with the same "MODEM" -S7500XXLB1 as in setting->about phone-> "Baseband"
how can i match PDA, CSC to my current phone?
what are they mean?
Thanks,
Dotan
Click to expand...
Click to collapse
1. if any problem occured it's the best to flash stock rom..and remember before flashing custom rom for cm or speedmod sometime you need to wipe system for best result.
2. if your country is not listed, dial *#1234# and check your PDA. XX mean for German and LB1 is your firmware version.
CSC is sales code.

Zaraee said:
1. if any problem occured it's the best to flash stock rom..and remember before flashing custom rom for cm or speedmod sometime you need to wipe system for best result.
2. if your country is not listed, dial *#1234# and check your PDA. XX mean for German and LB1 is your firmware version.
CSC is sales code.
Click to expand...
Click to collapse
Is there a way to solve this without flashing the stock rom . Because the stock is in rapidgator and terafile.
If there isn't and I get stock instaled in my phone in a samsung store will ir work. I'm from India So they will flash INU or INS

DayanGts7500 said:
Is there a way to solve this without flashing the stock rom . Because the stock is in rapidgator and terafile.
If there isn't and I get stock instaled in my phone in a samsung store will ir work. I'm from India So they will flash INU or INS
Click to expand...
Click to collapse
you can try any custom rom from gingerbread..as we know ICS/JB/KITKAT are not stable for our ace plus

DayanGts7500 said:
Is there a way to solve this without flashing the stock rom . Because the stock is in rapidgator and terafile.
If there isn't and I get stock instaled in my phone in a samsung store will ir work. I'm from India So they will flash INU or INS
Click to expand...
Click to collapse
u r from assam right.. we have official firmware on sammobile for india

dotan9222 said:
1. why would it help? I successfully restored from backup and phone is up&running.. problem happens after flashing custom rom...
2. how can i know witch firmware to download?
my country dosen't appear in the list...
I found few other countries with the same "MODEM" -S7500XXLB1 as in setting->about phone-> "Baseband"
how can i match PDA, CSC to my current phone?
what are they mean?
Thanks,
Dotan
Click to expand...
Click to collapse
Maybe you already solved the problem but just so you know:
Indian firmware has a certain bug which causes white screen issues when flashing custom rom
Then, flash a stock rom from a different country no matter if english or french or whatever (it has to be European as there are reports of the bug on arabic and chinese firmwares too)

Androidoo said:
u r from assam right.. we have official firmware on sammobile for india
Click to expand...
Click to collapse
I flashed the official Indian firmware that didn't worked. I also tried csc of Indonesia, Nepal and few other countrys .nothing worked.
---------- Post added at 11:20 PM ---------- Previous post was at 11:13 PM ----------
ShadowsDie said:
Maybe you already solved the problem but just so you know:
Indian firmware has a certain bug which causes white screen issues when flashing custom rom
Then, flash a stock rom from a different country no matter if english or french or whatever (it has to be European as there are reports of the bug on arabic and chinese firmwares too)
Click to expand...
Click to collapse
Is there a mediafire (something similar) link to European stock because I can't download from rapidgator and terafile .

DayanGts7500 said:
I flashed the official Indian firmware that didn't worked. I also tried csc of Indonesia, Nepal and few other countrys .nothing worked.
---------- Post added at 11:20 PM ---------- Previous post was at 11:13 PM ----------
Is there a mediafire (something similar) link to European stock because I can't download from rapidgator and terafile .
Click to expand...
Click to collapse
sammobile, make account, log in, http://www.sammobile.com/firmwares/3/?download=13383

dude i flashed stock no such problems..indian firmware

Androidoo said:
dude i flashed stock no such problems..indian firmware
Click to expand...
Click to collapse
Really never worked for me. what was the basebrand .??

DayanGts7500 said:
Really never worked for me. what was the basebrand .??
Click to expand...
Click to collapse
ddme1 the updaate of 6th july 2013 on sammobile

Androidoo said:
ddme1 the updaate of 6th july 2013 on sammobile
Click to expand...
Click to collapse
Ok will check today. Thanks

ShadowsDie said:
sammobile, make account, log in, http://www.sammobile.com/firmwares/3/?download=13383
Click to expand...
Click to collapse
Hiee bro I did. Flash this and got an error in flashing fat.bin I googled and realize what the problem is. They said I can only flash my owm countrys frimware. Then how other indian people using kit kat.

DayanGts7500 said:
Hiee bro I did. Flash this and got an error in flashing fat.bin I googled and realize what the problem is. They said I can only flash my owm countrys frimware. Then how other indian people using kit kat.
Click to expand...
Click to collapse
dude u need to flash this speed mod version 2.5... thats the only kitkat for ace plus and has buggs

DayanGts7500 said:
Hiee bro I did. Flash this and got an error in flashing fat.bin I googled and realize what the problem is. They said I can only flash my owm countrys frimware. Then how other indian people using kit kat.
Click to expand...
Click to collapse
i have no idea what to tell you
try formatting system partition before flashing european

ShadowsDie said:
i have no idea what to tell you
try formatting system partition before flashing european
Click to expand...
Click to collapse
I did. that didn't work . I will try the Indian one tomorrow. I have a question by the way, my download mode part contains the indian frimware nd the pda and phone contains Thailand frimware because ot titrions custom rom so.

[Q] How to change CSC to branded 920F

Hi, first flashed french 5.1.1 and now that vodafone has released the branded 5.1.1 want to back to stock (ATL) but when flash the sammobile package the csc changes to SIM (vodafone slovenia) and there´s no way to change the csc.
I´ve reading a lot and seems the ATL package is multicsc and flashing defaults to SIM. and there´s no possibility to change csc because cant root 5.1.1
Im totally stuck. Why want the branded? the operator customization and VoLTE activation.
Thanks to all

Do a factory reset in the bootloader, boot up and then flash the operator rom again

*#272*IMEI#

Tried flashing, boot, wipeall twice, flashing wipe data and cache but the multicsc stays as SIM csc...
*#272.... doesnt work in this devices.
tried to downgrade to 5.0.2 and root to change manually csc but the bootloader is upgraded keeping downgrades.
the only hope is pingpongroot or anyone can root 5.1.1 without tripping knox

Bring your S6 back to Samsung for official ROM flashing back to stock.

Only way to change CSC is to root...

roydok said:
Only way to change CSC is to root...
Click to expand...
Click to collapse
Not true. I did it several times on unrooted stock devices.

godutch said:
Not true. I did it several times on unrooted stock devices.
Click to expand...
Click to collapse
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.

roydok said:
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.
Click to expand...
Click to collapse
Did you let the phone boot completely after flashing the new firmware and then do the wipe from recovery?

Yes I did. My unit is G920FD from Philippines. Downloaded 5.1.1 Globe Philippines (CSC:GLB) from Sammobile. After successful flash via odin with Full wipe at recovery the CSC defaulted to THL (Thailand). I tried all Phillipine-based 5.1.1 ROMs from Sammobile and flashed them all (3) with full wipe at recovery each time but sadly still CSC is still THL (Thailand).

roydok said:
Yes I did. My unit is G920FD from Philippines. Downloaded 5.1.1 Globe Philippines (CSC:GLB) from Sammobile. After successful flash via odin with Full wipe at recovery the CSC defaulted to THL (Thailand). I tried all Phillipine-based 5.1.1 ROMs from Sammobile and flashed them all (3) with full wipe at recovery each time but sadly still CSC is still THL (Thailand).
Click to expand...
Click to collapse
You could try without a simcard (flash, boot up, wipe in recovery) or a different simcard. I never manage to change csc either in 1 go and the results can be different, eg sometimes I get Vodafone apps installed and sometimes not....

Will try it without a SIM card. Thanks.

roydok said:
Will try it without a SIM card. Thanks.
Click to expand...
Click to collapse
Did this work in the end? I've got exactly the same issue except my CSC is stuck on SIM (Slovakia) when I want it to be UK

greenredblue said:
Did this work in the end? I've got exactly the same issue except my CSC is stuck on SIM (Slovakia) when I want it to be UK
Click to expand...
Click to collapse
I also tried it but couldn't get it to the correct CSC (VDF in my case) either, I can do it with other packages and get it to PHN (dutch)

roydok said:
Yes it is True. Please read the 1st post. OT described his problem as flashing the French 5.1.1 from his previous 5.0.2 ROM. When the 5.1.1 version of his country came and he flashed back using the ROM from Sammobile his CSC was changed. I encountered this same problem. My S6 is unrooted. Only way to change CSC on unrooted device is to root. I tried the methods above and did not work also.
Click to expand...
Click to collapse
I have had managed the csc change also with odin, fw flashing. BUt it took at least 10 flashing, but did it.
please note, that I have had issues after ANY of XEF firmware flasing. After XEF fw, I was very difficult to do this odin flashing method succesfully. BUT it did.
but I cannot rememe what was the sequence of this procedure. I was using 5-6 different ZIPs from sammobile.

tiborprogmed said:
I have had managed the csc change also with odin, fw flashing. BUt it took at least 10 flashing, but did it.
please note, that I have had issues after ANY of XEF firmware flasing. After XEF fw, I was very difficult to do this odin flashing method succesfully. BUT it did.
but I cannot rememe what was the sequence of this procedure. I was using 5-6 different ZIPs from sammobile.
Click to expand...
Click to collapse
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?

greenredblue said:
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?
Click to expand...
Click to collapse
i have flashed the XEF. and that was wrong. esspecially it broke the spo2, and stress measuring... I would go back to another, BUT after XEF, I always had flashing interrupt in the HIDDEN file stage.
But after I have found a flashable FW again ( maybe SER or SEB) I was able to flash XEH, or BTU. and it was changing the XEF to SEB OR SER after wipe in recovery.
The only rom I will never flash againt is XEF.
ps: i never root this 920F

greenredblue said:
do you have ANY idea how you did it? Are you actually sure you changed the CSC without rooting the device on a firmware that was multi CSC?
Click to expand...
Click to collapse
Now I was able to reproduce it twice!!! :
How it works : on devices where dialer NOT shown up CSC changer (e.g.: GS6920F) :
Go to recovery, Dial up, Home + Power
wipe cache and perform a factory reset
next is important : power down the phone. NOT to reboot.
Power on in download mode: volume down+home+power buttons
FLASH for example : BTU :
G920FXXU3COI9_G920FBTU3COJ1_G920FXXU3COI9_HOME.tar
after reboot, it will be English, and If U go to recovery it will apply BTU.
Hope it helps
p.s.: It wont works with EVERY Firmware. don't know WHY. For example :
I wanted to flash after succesfully changed the CSC from TPH to BTU, so I wanted to flash XEH....BUT that resets to TPH after XEH flash.
So at least to BTU it works specially if you are in TPH CSC !

HELP Galaxy S6 duos SM-G920FD

Can someone help me find any download source of this firmware,
Galaxy s6 DUOS, SM-G920FD
As I wanted to Upgrade my galaxy s6 duos to andorid 5.1.1
But unfortunately, from SamMobile firmware website, they do not have that kind of firmware on my phone.
Can you please, if any, share your firmware . Any help will be appreciated.
Details:
AP: G920FXXU1AODE
CP: G920FXXU1AODE
CSC: G920FOJV1AODE
Model: SM-G920FD

I think it's the same as g920f
I have g920fd and in settings it reads phone model as g920f and baseband as G920FXXU2BOFJ whitch is the same for g920f
i dont know if it has any additional software to handle dual sim or not
edit: in other thread some users confirms that g920f can be installed
check http://forum.xda-developers.com/galaxy-s6/general/galaxy-s6-duos-dual-sim-t3079017/page62

scorpion112 said:
Can someone help me find any download source of this firmware,
Galaxy s6 DUOS, SM-G920FD
As I wanted to Upgrade my galaxy s6 duos to andorid 5.1.1
But unfortunately, from SamMobile firmware website, they do not have that kind of firmware on my phone.
Can you please, if any, share your firmware . Any help will be appreciated.
Details:
AP: G920FXXU1AODE
CP: G920FXXU1AODE
CSC: G920FOJV1AODE
Model: SM-G920FD
Click to expand...
Click to collapse
I have the firmware 5.1.1 for FD MTZ and ECT CSC, but i dont have the bandwidth to upload. This link is definately for the FD as i have same duos version.
http://live.samsung-updates.com/details/48692/Galaxy_S6/SM-G920F/MTZ/G920FXXU2BOFL.html

Here you go. Choose your country and flash via odin:
http://www.sammobile.com/firmwares/database/SM-G920F/

roydok said:
Here you go. Choose your country and flash via odin:
http://www.sammobile.com/firmwares/database/SM-G920F/
Click to expand...
Click to collapse
Thats mean can i flash SM-G920F Rom
With SM-G920FD without any proplem

scorpion112 said:
Thats mean can i flash SM-G920F Rom
With SM-G920FD without any proplem
Click to expand...
Click to collapse
Yes.

scorpion112 said:
Thats mean can i flash SM-G920F Rom
With SM-G920FD without any proplem
Click to expand...
Click to collapse
Have you done this? Did you flash firmware for the 920 F on the 920 FD? Did everything work ok? I just ordered the 920 FD and am wondering how I also can upgrade it when I receive it to Android 5.1.1

yes yes i flash a g920f rom with fd
and every thing works fine
its the same frimware g920fd and g920f
you can safely flash it ^_^

scorpion112 said:
yes yes i flash a g920f rom with fd
and every thing works fine
its the same frimware g920fd and g920f
you can safely flash it ^_^
Click to expand...
Click to collapse
Thanks a lot. One more question. I am french but based in the usa. Out of all the 920f firmwares which one would be the most generic. I see a bunch that have "unkown" listed as the country. Which firmware would be the most generic?

GCbard said:
Thanks a lot. One more question. I am french but based in the usa. Out of all the 920f firmwares which one would be the most generic. I see a bunch that have "unkown" listed as the country. Which firmware would be the most generic?
Click to expand...
Click to collapse
Just flash via odin this latest 5.1.1 generic stock ROM
http://www.sammobile.com/firmwares/download/51274/G920FXXU2BOG8_G920FOXA2BOG8_XEF/

roydok said:
Just flash via odin this latest 5.1.1 generic stock ROM
http://www.sammobile.com/firmwares/download/51274/G920FXXU2BOG8_G920FOXA2BOG8_XEF/
Click to expand...
Click to collapse
Thanks. So I can flash this firmware and then install twrp. After that I can flash a fd compatible 5.1.1 rom? Can someone confirm if this is correct.

yes

roydok said:
Just flash via odin this latest 5.1.1 generic stock ROM
http://www.sammobile.com/firmwares/download/51274/G920FXXU2BOG8_G920FOXA2BOG8_XEF/
Click to expand...
Click to collapse
where did you find this firmware? On sammobile I can onluy find Byogues and Oranage for France.

Its there. You need to sign-in to access it.

roydok said:
Its there. You need to sign-in to access it.
Click to expand...
Click to collapse
Thanks. I loaded it today when I received the phone and it works great!

s6 dual error
i tried flashing latest firmware from sammobile
but it gives me error on hidden.img
i have sorted the flashing problem by using the pit file of uae
ZEROFLTE_EUR_OPEN_HIDDEN150M (OJV Middile East Files)
nut now the issue is that the phone is stuck in bootloop
tried factory reseting also
tried flashing Unikeranal also through odin
please help me out
phone is samsung s6 dual (G920FD)

afzalcool said:
s6 dual error
i tried flashing latest firmware from sammobile
but it gives me error on hidden.img
i have sorted the flashing problem by using the pit file of uae
ZEROFLTE_EUR_OPEN_HIDDEN150M (OJV Middile East Files)
nut now the issue is that the phone is stuck in bootloop
tried factory reseting also
tried flashing Unikeranal also through odin
please help me out
phone is samsung s6 dual (G920FD)
Click to expand...
Click to collapse
have you fixed this? I tried to flash G920F XSG to my G920FD and got hidden.img error and I don't want to try to use pit file til I can guarantee it's safe to use.

coowkeee said:
have you fixed this? I tried to flash G920F XSG to my G920FD and got hidden.img error and I don't want to try to use pit file til I can guarantee it's safe to use.
Click to expand...
Click to collapse
i flashed with pit my phone sucessful flashed but its was stuck in bootloop

afzalcool said:
i flashed with pit my phone sucessful flashed but its was stuck in bootloop
Click to expand...
Click to collapse
have you tried going back to your phone's default firmware?

Downgrade 6.0.1 to 5.1.1 G925F

Hello guys,
I updated my Edge to 6.0.1 a few days ago and I found myself extremely stuggling to get twrp and xPosed on my device since then.
Now I'm wondering if all i need to do to downgrade back to 5.1.1 is to flash AP via Odin or if i need to flash everything else (BT, CSC..)?
Please help

Just flash a fw via odin like you would normaly do. Just perform a factory reset after it.

mrjraider said:
Just flash a fw via odin like you would normaly do. Just perform a factory reset after it.
Click to expand...
Click to collapse
Just flash a stock firmware via Odin if you are rooted or not, and you don't either need to perform a factory reset as flashing a stock firmware with Odin will wipe all data, system and so one as far as I know
Envoyé de mon SM-G928F en utilisant Tapatalk

mrjraider said:
Just flash a fw via odin like you would normaly do. Just perform a factory reset after it.
Click to expand...
Click to collapse
No need to downgrade the bootloader and modem as well?

casparpoon said:
No need to downgrade the bootloader and modem as well?
Click to expand...
Click to collapse
It'll be downgraded if you flash stock ROMs you've downloaded from sammobile

will be work when reactiavtion lock on and i cant go on menu couse Samsung ID forget .and want to downgrade

VFL said:
will be work when reactiavtion lock on and i cant go on menu couse Samsung ID forget .and want to downgrade
Click to expand...
Click to collapse
You'd better remember, or try to recover your samsung account, because if reactivation lock is on, you won't be able to flash without having to enter your samsung account credentials

what can i do if odin fails?

Secure Check Fail (bootloader)

Hey guys
I'm trying to install CYV version of 7.0 Nougat update but as soon as I hit START in Odin, it fails and my phone shows this error: SECURE CHECK FAIL (BOOTLOADER).
I'd like to know how can I fix it and continue with the installation.
Also, do any of these factors influence on this error?
1. My phone is G920I and the firmware is for G920F.
2. My region is not CYV.
3. I have TWRP 3.1.0 installed.
Thanks for your help and attention.

G920f use a different bootloader than G920i, you can use a custom rom based in a G920f firmware like fastrom but you need a G920i bootloader and módem installed, you cant flash a G920f firmware in a G920i. Flash a G920i mm firmware and start again

sc7es said:
G920f use a different bootloader than G920i, you can use a custom rom based in a G920f firmware like fastrom but you need a G920i bootloader and módem installed, you cant flash a G920f firmware in a G920i. Flash a G920i mm firmware and start again
Click to expand...
Click to collapse
920I

Williknot said:
920I
Click to expand...
Click to collapse
I see you're brazilian too
How you managed to install 7.0 on your G920I ?
I have DNXXS BaseROM installed right now.
sc7es said:
G920f use a different bootloader than G920i, you can use a custom rom based in a G920f firmware like fastrom but you need a G920i bootloader and módem installed, you cant flash a G920f firmware in a G920i. Flash a G920i mm firmware and start again
Click to expand...
Click to collapse
Oh, I didn't know that. Thanks, mate!

timeshiftt said:
I see you're brazilian too
How you managed to install 7.0 on your G920I ?
I have DNXXS BaseROM installed right now.
Oh, I didn't know that. Thanks, mate! I'm gonna take a look at this.
Click to expand...
Click to collapse
See your inbox. I send a mensage to you.

Williknot said:
920I
Click to expand...
Click to collapse
Code:
how to get n7 on my g920I

help with my s6 g920r
hello guys!!!
please i've my s6 g920r running on android 6.0.1 and i want to install N7
but when i try odin displays fail!! and the phone : secure check fail(bootloader)
how i'm i supposed to do that please?
thanks

djomouange said:
hello guys!!!
please i've my s6 g920r running on android 6.0.1 and i want to install N7
but when i try odin displays fail!! and the phone : secure check fail(bootloader)
how i'm i supposed to do that please?
thanks
Click to expand...
Click to collapse
I'm having the exact same issue with the exact same error message on my S6 G-920P Sprint phone when trying to flash to T-Mobile. There has to be a work around because flashing from Sprint to T-Mobile works flawlessly on my Sprint branded S7.

I'm trying to install firmware on my s8 SM-G950FD it keeps saying secure check fail : bootloader need help

Baffamk said:
I'm trying to install firmware on my s8 SM-G950FD it keeps saying secure check fail : bootloader need help
Click to expand...
Click to collapse
I have the same problem have you found any solution?

you are installing old firmware download latest firmware