Hello guys.. I used spreadtrum tool to flash .pac file of my stock rom to my intex cloud force phone disconnected in between the process and now the phone does not boot at all.
please friends help me, what i can do to fix it.
Thank you.
anakshiant said:
Hello guys.. I used spreadtrum tool to flash .pac file of my stock rom to my intex cloud force phone disconnected in between the process and now the phone does not boot at all.
please friends help me, what i can do to fix it.
Thank you.
Click to expand...
Click to collapse
If it won't turn on, won't boot to any of its modes, won't charge, has no LED while connected to charger, won't connect to PC and doesn't show in device manager on PC, then unfortunately it's hard bricked, you can't fix it yourself, you'll have to take it to a professional shop for either a JTAG service or a new motherboard.
Sent from my SM-S903VL using Tapatalk
Related
After installing a custom rom I have lost recovery and fastboot mode
and now with my stupidity I also lost download mode ,it doesn't on or charge
just peacefully dead
But RESPONDING to QPST(qualcomm products supporting tool) but unfortunately I don't have necessary files
I found this tool by googling and found that other karbonn devices (qualcomm) as S1 are able to revive using this tool even after hard brick because they have necessary files (revive kit)
I request to developes to provive me such revive kit for Titanium S5
You guys are my last hope
plz help me Guys
I hate to go to service centers as they told me that it takes more than 2 months to replace my motherboard :crying:
NafeesTyagi said:
After installing a custom rom I have lost recovery and fastboot mode
and now with my stupidity I also lost download mode ,it doesn't on or charge
just peacefully dead
But RESPONDING to QPST(qualcomm products supporting tool) but unfortunately I don't have necessary files
I found this tool by googling and found that other karbonn devices (qualcomm) as S1 are able to revive using this tool even after hard brick because they have necessary files (revive kit)
I request to developes to provive me such revive kit for Titanium S5
You guys are my last hope
plz help me Guys
I hate to go to service centers as they told me that it takes more than 2 months to replace my motherboard :crying:
Click to expand...
Click to collapse
this might help u
http://forum.xda-developers.com/showthread.php?t=2459150&page=2
Help me in recovering the device.... using qpst tool.. just like karbonn a9+
i mean with MPRG8X25.hex and 8X25_msimage.mbn ,files to recover the phone
this might work
try going into recovery mode ... do a clean flash..
NafeesTyagi said:
After installing a custom rom I have lost recovery and fastboot mode
and now with my stupidity I also lost download mode ,it doesn't on or charge
just peacefully dead
But RESPONDING to QPST(qualcomm products supporting tool) but unfortunately I don't have necessary files
I found this tool by googling and found that other karbonn devices (qualcomm) as S1 are able to revive using this tool even after hard brick because they have necessary files (revive kit)
I request to developes to provive me such revive kit for Titanium S5
You guys are my last hope
plz help me Guys
I hate to go to service centers as they told me that it takes more than 2 months to replace my motherboard :crying:
Click to expand...
Click to collapse
The case was with me when I flashed android Honeycomb on it. I Hard-bricked it! ( Not even showing reaction when connected to charger ) ( nor booting )
I submitted my phone to Service centre and they said it would take at least 2 months. But I got my repaired phone on the 10th day!
For your problem the only best solution is Service center...
You can get firmware version and download tools from this website http://support.moulnisky.com/index.php?dir=Karbonn/S5_Titanium/
i changed my phone
but thanx manav113
Bad luck I presume..
Sent from my A15 using XDA Premium 4 mobile app
Titanium S1
NafeesTyagi said:
After installing a custom rom I have lost recovery and fastboot mode
and now with my stupidity I also lost download mode ,it doesn't on or charge
just peacefully dead
But RESPONDING to QPST(qualcomm products supporting tool) but unfortunately I don't have necessary files
I found this tool by googling and found that other karbonn devices (qualcomm) as S1 are able to revive using this tool even after hard brick because they have necessary files (revive kit)
I request to developes to provive me such revive kit for Titanium S5
You guys are my last hope
plz help me Guys
I hate to go to service centers as they told me that it takes more than 2 months to replace my motherboard :crying:
Click to expand...
Click to collapse
Hey you said that u found some tool for karbonn s1, can u tell us what is this tool? I know a tool called Acronis True Image but it requires backup image of the sys_boot partition. That means someone who has working S1/S5 has to take back up of recovery partition(sector by sector) using Acronis True Image and upload it here on xda or somewhere else and we can use that back up with the same tool. Please let me know if u have solution
Ya!
my karbonn smartphone was only responding to qpst tool (qualcomm products supporting tool)
I encountered with it while I was googling to revive my hard brick phone.
even phone was neither charging nor booting but responding to qpst.
If you want qpst tool I can send you by mail
But I don't have any backup of firmware files.
I think you should talk to zeyaan or deepa2119 they may help you probably they have back up
NafeesTyagi said:
Ya!
my karbonn smartphone was only responding to qpst tool (qualcomm products supporting tool)
I encountered with it while I was googling to revive my hard brick phone.
even phone was neither charging nor booting but responding to qpst.
If you want qpst tool I can send you by mail
But I don't have any backup of firmware files.
I think you should talk to zeyaan or deepa2119 they may help you probably they have back up
Click to expand...
Click to collapse
HeyI have the 2.7 build 411 but my phone (LG G3 Qualcomm 400 MSM8926) doesnt appear on the selection menu or is detected by the program. Would you have a newer version?
Dear All,
Now I got a Karbonn A9+ in dead condition and i try to put download mode but it does not works.
The phone totally in dead condition,And i trying to connect with usb cable to pc it only shows (ZEUS FLASH DEVICE) in device manager.
And i try tried for solution in forum and google , no solution is found.
If anyone have the solution Pls share here.
Thanks in Advance.
Br,
Kannan.
serviceworld87 said:
Dear All,
Now I got a Karbonn A9+ in dead condition and i try to put download mode but it does not works.
The phone totally in dead condition,And i trying to connect with usb cable to pc it only shows (ZEUS FLASH DEVICE) in device manager.
And i try tried for solution in forum and google , no solution is found.
If anyone have the solution Pls share here.
Thanks in Advance.
Br,
Kannan.
Click to expand...
Click to collapse
First of all check it have qualcomm cpu inside..
Second install the driver of a9+ for qualcomm device
As i know it should show some "qload downloader 9006"
In device manager.
good afternoon all, needing a little information here for repairing partners phone.
after installing dolphin browser phone died. back light comes on for a brief moment at start up. does not boot. however connection sound via usb when plugged in.
phone is xolo a500l re branded as cherry mobile life, from Philippines.
its mtk 6572w . 4.2jb
phone is not root
usb debugging status unknown
phone does not enter factory recovery ( volume +power) if you know another method please advice.
attempted to flash factory rom via flashtool.
(brom error:s _da_emmc_flash_not_found (3144)
gimme a place to start guys
much aprechiated
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
N'ayam Amarsh'e said:
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
Click to expand...
Click to collapse
he was trying to install a custom ROM and flashed the PRELOADER first...the process stopped halfway through and the phone has been bricked ever since.. :crying:
rakave said:
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Click to expand...
Click to collapse
did you try to restock it.. installing a stock rom is the last option if available.. if the phone is not even turning on, check battery.. make sure your battery is charged..
and at last.. you could just try taking it to the service center if it's in warrenty.. but make sure it doesn't turn on.. don't tell them you were flashing.. they will never know.. hope it help in any way..
btw check out my signature...
Hello there!
So here goes my problem: The thing I was trying to do> Flashing a random rom in my MTK6582 device. Why random? Because I was unable to find my official ROM on internet. I thought if I flash any random ROM having MTK6582 device, It would work, which resulted in my current despo situation. No boot, No Logo, Nothing. The thing that triggered this was none other than "FORMAT" button from SP FLash Tool. Yup. Beforehand, I could at least enter in Bootloop and Recovery Mode. So is there anything which could be done except changing motherboard or force booting with JIG. As I said, it still shows "MTK USB Port" when I connect my phone w/o battery, however, Preloader is no longer appears. One more thing, it's not disappearing after 2 seconds as it did with preloader. Please, save my bud!!!
Device Name: Qmobile Linq X70, MTK6582, ARMv7 Quad Core 1.3GHz, KitKat 4.4.2
deoryus said:
Hello there!
So here goes my problem: The thing I was trying to do> Flashing a random rom in my MTK6582 device. Why random? Because I was unable to find my official ROM on internet. I thought if I flash any random ROM having MTK6582 device, It would work, which resulted in my current despo situation. No boot, No Logo, Nothing. The thing that triggered this was none other than "FORMAT" button from SP FLash Tool. Yup. Beforehand, I could at least enter in Bootloop and Recovery Mode. So is there anything which could be done except changing motherboard or force booting with JIG. As I said, it still shows "MTK USB Port" when I connect my phone w/o battery, however, Preloader is no longer appears. One more thing, it's not disappearing after 2 seconds as it did with preloader. Please, save my bud!!!
Device Name: Qmobile Linq X70, MTK6582, ARMv7 Quad Core 1.3GHz, KitKat 4.4.2
Click to expand...
Click to collapse
Actually, your shouldn't have done it, since as far as I have searched, I didn't find any Flashable stock ROM for your phone.
Flashing some other device's ROM will never work, since the mount points will be completely different even if you flash ROM of same chipset.
The only solution for this is waiting for someone to post flashable stock ROM for your phone, or finding someone who has the same phone and asking them to dump the ROM completely and give it to you, or the best way: Go to Service Center
Try flashing any flashable custom/stock rom if available for your device, and if not then u can use it as paperweight. And service center might not able to help as ur preloader is corrupted.
GokulNC said:
Actually, your shouldn't have done it, since as far as I have searched, I didn't find any Flashable stock ROM for your phone.
Flashing some other device's ROM will never work, since the mount points will be completely different even if you flash ROM of same chipset.
The only solution for this is waiting for someone to post flashable stock ROM for your phone, or finding someone who has the same phone and asking them to dump the ROM completely and give it to you, or the best way: Go to Service Center
Click to expand...
Click to collapse
Well, my uncle have same phone. Is it possible to extract a flashable ROM from his device?
deoryus said:
Well, my uncle have same phone. Is it possible to extract a flashable ROM from his device?
Click to expand...
Click to collapse
Yes, you can.
This will help: http://www.theandroidhow.com/2014/05/how-to-backup-rom-dump-mtk-android.html
It's quite difficult for a beginner.
Going to Service Center is the best way as I said.
Don't brick your uncle's phone too trying to save yours.
The choice is yours now