[Q] cherry xolo a500l mtk 6572w help - General Questions and Answers

good afternoon all, needing a little information here for repairing partners phone.
after installing dolphin browser phone died. back light comes on for a brief moment at start up. does not boot. however connection sound via usb when plugged in.
phone is xolo a500l re branded as cherry mobile life, from Philippines.
its mtk 6572w . 4.2jb
phone is not root
usb debugging status unknown
phone does not enter factory recovery ( volume +power) if you know another method please advice.
attempted to flash factory rom via flashtool.
(brom error:s _da_emmc_flash_not_found (3144)
gimme a place to start guys
much aprechiated

Related

[Q] Celkon A119Q - Hard Bricked my Daughter's Phone :( Help

Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
N'ayam Amarsh'e said:
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
Click to expand...
Click to collapse
he was trying to install a custom ROM and flashed the PRELOADER first...the process stopped halfway through and the phone has been bricked ever since.. :crying:
rakave said:
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Click to expand...
Click to collapse
did you try to restock it.. installing a stock rom is the last option if available.. if the phone is not even turning on, check battery.. make sure your battery is charged..
and at last.. you could just try taking it to the service center if it's in warrenty.. but make sure it doesn't turn on.. don't tell them you were flashing.. they will never know.. hope it help in any way..
btw check out my signature...

[Q] xolo q600s help for factory reset or flash

Hello there,
I am new to this forum and android as well.
I have xolo q600s phone which is recently being
useless because of too many times pattern attempts.
I know email and password but which is not useful as
my internet connection is disable.
I also activated xolo secure due to that i am unable
factory reset in recovery ( it says first you'll have to
unlocked xolo secure but phone is locked) .
I also disable the usb debugging because of xolo secure.
when i trying to flash my phone by Broadcom MultiDownloader..then my phone not detect. bcaz of driver.. i tried to install adb driver that's also not installing.. its say phone not found..
Now you guys work on android from so much long
time is any one know command from which i can
factory reset my phone
I dont want to take my cell to customer care because i
rooted my phone.
Lastly if no option i have to go customer care support.

[Completed] [Q] Bricked device( i suppose)

Hi All ,
I have a xolo q1010i which was running on few custom roms previously before I managed to get the flash stock rom from (brieftutorials.com/how-to-unbrick-xolo-q1010i-by-installing-stock-rom/[/url])
Now I used the SP flash tool to unbrick it and install the stock rom, it worked fine until i found that the IMEI was lost.
Still i managed to insert imei using uncle tools and everything was fine.
this is where the problem starts:
I got an update OTA for KitKat and once I updated it the phone was stuck in a loop
So i connected sp flash tool and ran the 4.2.2 stock rom, but suddenly half way I got an error messasge and that was the end.
I have a black screen device on which nothing works, no logo , no charging light, no power + volume up, no power+volume up+down etc .
Not even lights,
Windows says an unidentified device detected and SP flash tool does'nt work.
Have no clue what to do , Is this the end ? or do I have to try the USB Jig / send it for Jtag repair ?
All comments & Ideas appreciated.
Thanks in advance
_____________
Hola,
I managed to resurrect my mobile, I tried Jtag to bypass the preloader by researching a lot ( thanks to my all posts china mobile website) then used SP tools to flash the stock rom ( thanks to Kalaishere XDA )
Finally its working on Jellybean.
I will soon update it and also fix the tiny issue with no imei number
Issue resolved, thread closed, thanks.

[Completed] Lenovo A536 Problem

Hello everyone this is my first post on this forum.Greetings to everyone!
I have Lenovo A536 android 4.4 smartphone rooted with Kingroot app
I tried to update vibeUi this morning despite the warning of rooted device:angel:.Update failed and i removed the battery when screen stopped cause device didnt turn off from power button
>Phone now enters only Boot recovery menu and reaches till lenovo logo.The phone doesnt recognise SD Card
I tryed to wipe data/factory defaults and cache so far from boot recovery menu.The other options didnt work.
>Tried so far stock roms A536_S175_150105_ROW
, A536_S147_140910_ROW with Smart Phone Flash Tool a
nd Sp Flash Tool without any luck.Also Installed SDK Tools with 4.4.2 and run through CMD line
but commands wont respond.(trying adb bridge)
Please provide me with info explain me with details what should i do, because i am total amateur using
android tools.I know it was dumb to do those things to phone so i am paying the price now (The warranty of the phone is on if i messed it badly).
Thanks in advance.
AndroidNoobUser said:
Hello everyone this is my first post on this forum.Greetings to everyone!
I have Lenovo A536 android 4.4 smartphone rooted with Kingroot app
I tried to update vibeUi this morning despite the warning of rooted device:angel:.Update failed and i removed the battery when screen stopped cause device didnt turn off from power button
>Phone now enters only Boot recovery menu and reaches till lenovo logo.The phone doesnt recognise SD Card
I tryed to wipe data/factory defaults and cache so far from boot recovery menu.The other options didnt work.
>Tried so far stock roms A536_S175_150105_ROW
, A536_S147_140910_ROW with Smart Phone Flash Tool a
nd Sp Flash Tool without any luck.Also Installed SDK Tools with 4.4.2 and run through CMD line
but commands wont respond.(trying adb bridge)
Please provide me with info explain me with details what should i do, because i am total amateur using
android tools.I know it was dumb to do those things to phone so i am paying the price now (The warranty of the phone is on if i messed it badly).
Thanks in advance.
Click to expand...
Click to collapse
Hi,
Thank you for using XDA assist
There is no dedicated forum for your device. However there is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get the expert's help
Good luck.

[Completed] delicious matter !help me! my bricked device keeps re/disconnect with my pc quickly

:silly: delicious matter for xda-developers [!!help me!! my bricked device keeps reconnect and disconnect quickly 3 sec with my pc ;so I can't restore stock rom on my device]
hi guys,since two day I've flashed my device with wrong rom :angel:{I'm not know about flashing wrong rom because I browsed a lot of porting roms subject in some forums then I've become able to flash my device and I've knowledge about this operating but I believed like this "now I owned the world " :laugh:after installing custom recovery cwm and backuping overall the device}.
however I flashed three rom adapted with my tablet before porting the wrong rom.
in abbreviately,after wrong rom the tablet is in boot loop 5 sec and restart,is it stuck in manufacture lego
which are mayhem picture after flashing the wrong rom then restart again .
I try and try again to booting into custom recovery
but is unuseful the tablet not reach custom recovery with pressing (vol.up button +pwr.button)
or reach factory mod with pressing (vol.down button+pwr buttton).
now,I try to fix the problem when connect the tablet with my pc via usb cord
,my bricked device reconnect & disconnect with pc quickly almost 3 sec ,usb cable otg is perfect functional though
is it occurring (I able to driving the tablet but I am not able to flashing with flashing tools such as : sp flash tool & mtkdroid tools)
the trouble is not fix when pressing (vol.up or vol.down or both these or both these with pwr or pwr alone ) before plug otg cable with my pc.
I searched and watched solved mtk problem on youtube but my trouble is not similar anything of this problems
and nothing about this on sites and forums.:crying:
in addition to :
I disassembly the case of my tablet and disconnect the battery connection with tablet motherboard
but same result.
!!!!please tell my how to fix this trouble!!! and able to flash stock rom
detail device
name :CCIT A799W (china tablet)
cpu :mediatek 6572
intsd: 8G
RAM : 1g
ANDRO: 4.2.2 (jellybean)
board: HX-M706-MB-V1.1.0
N.B: the wrong rom is Lollifox_MT6572_Kitkat_Ajit_mtkroms-com exactly. they say: for mt6572 only (not mt6572 running kitkat )
for more info tell me and good luck for every body .
mohamed thebear said:
:silly: delicious matter for xda-developers [!!help me!! my bricked device keeps reconnect and disconnect quickly 3 sec with my pc ;so I can't restore stock rom on my device]
hi guys,since two day I've flashed my device with wrong rom :angel:{I'm not know about flashing wrong rom because I browsed a lot of porting roms subject in some forums then I've become able to flash my device and I've knowledge about this operating but I believed like this "now I owned the world " :laugh:after installing custom recovery cwm and backuping overall the device}.
however I flashed three rom adapted with my tablet before porting the wrong rom.
in abbreviately,after wrong rom the tablet is in boot loop 5 sec and restart,is it stuck in manufacture lego
which are mayhem picture after flashing the wrong rom then restart again .
I try and try again to booting into custom recovery
but is unuseful the tablet not reach custom recovery with pressing (vol.up button +pwr.button)
or reach factory mod with pressing (vol.down button+pwr buttton).
now,I try to fix the problem when connect the tablet with my pc via usb cord
,my bricked device reconnect & disconnect with pc quickly almost 3 sec ,usb cable otg is perfect functional though
is it occurring (I able to driving the tablet but I am not able to flashing with flashing tools such as : sp flash tool & mtkdroid tools)
the trouble is not fix when pressing (vol.up or vol.down or both these or both these with pwr or pwr alone ) before plug otg cable with my pc.
I searched and watched solved mtk problem on youtube but my trouble is not similar anything of this problems
and nothing about this on sites and forums.:crying:
in addition to :
I disassembly the case of my tablet and disconnect the battery connection with tablet motherboard
but same result.
!!!!please tell my how to fix this trouble!!! and able to flash stock rom
detail device
name :CCIT A799W (china tablet)
cpu :mediatek 6572
intsd: 8G
RAM : 1g
ANDRO: 4.2.2 (jellybean)
board: HX-M706-MB-V1.1.0
N.B: the wrong rom is Lollifox_MT6572_Kitkat_Ajit_mtkroms-com exactly. they say: for mt6572 only (not mt6572 running kitkat )
for more info tell me and good luck for every body .
Click to expand...
Click to collapse
Greetings,
Thanks for using XDA Assist.
There are no specific forums for your device so I ask that you post your questions here:
Android Q&A, Help and Troubleshooting
The experts you'll find there may be able to help you.
Good luck!

Categories

Resources