Database Info

[Q] LG Optimus One bricked after failed reflash

Hello XDA-Developers
Before I am writing this, I want to say that I am relative jung and my English is not the best.
1 Year ago I rooted my phone, it worked great and so on.
After a half yeah I updatet the firmware on 2.3.3, but the root was still there.
No Problem, yesterday I wanted to install the cyagon-mod and I wanted first to flashback to the old Baseband @ 2.2.2.
I use the KDZ Updater and try to flashback to 2.2.2, but I followed the tutorials here, but at the time of flashing I
got a problem! The KDZ Updater sayed there was a fail. I attached the log. (Maybe the kdz file was damaged?)
I pulled it out and I took out the battery.
......
Now I think my LG Optimus one is bricked.
I if I try to start the phone nothing happend, if I try to get to the recovery mode it won´t give me a signal.
If I plug it into my PC with LG united Mobile Drivers installed it won´t get to the recovery mode.
I saw that I have a C++ runtime enviroment is that a Problem?
Is there probaly a method to repair the phone? Or can someone at my local mobilephone shop repair my mobile
Greetz

Bladgen said:
Hello XDA-Developers
Before I am writing this, I want to say that I am relative jung and my English is not the best.
1 Year ago I rooted my phone, it worked great and so on.
After a half yeah I updatet the firmware on 2.3.3, but the root was still there.
No Problem, yesterday I wanted to install the cyagon-mod and I wanted first to flashback to the old Baseband @ 2.2.2.
I use the KDZ Updater and try to flashback to 2.2.2, but I followed the tutorials here, but at the time of flashing I
got a problem! The KDZ Updater sayed there was a fail. I attached the log. (Maybe the kdz file was damaged?)
I pulled it out and I took out the battery.
......
Now I think my LG Optimus one is bricked.
I if I try to start the phone nothing happend, if I try to get to the recovery mode it won´t give me a signal.
If I plug it into my PC with LG united Mobile Drivers installed it won´t get to the recovery mode.
I saw that I have a C++ runtime enviroment is that a Problem?
Is there probaly a method to repair the phone? Or can someone at my local mobilephone shop repair my mobile
Greetz
Click to expand...
Click to collapse
if der is no light coming out than its hard bricked if you can go to emergency mode(google it) then u r lucky u can flash ur file again but this time use lgmdp method
or use kdz with precaution

androidisfuture said:
if der is no light coming out than its hard bricked if you can go to emergency mode(google it) then u r lucky u can flash ur file again but this time use lgmdp method
or use kdz with precaution
Click to expand...
Click to collapse
Thank you for your help, what do you mean with no light coming out I don´t understand you.
Do you think a member of a company which repair mobile phones can repair the phone?
Greetz

Bladgen said:
Thank you for your help, what do you mean with no light coming out I don´t understand you.
Do you think a member of a company which repair mobile phones can repair the phone?
Greetz
Click to expand...
Click to collapse
by power on is lg logo comes
if not something or the other happens like emergency mode download mode if not
then its hard bricked
and i think u have your warranty over so just buy a new phone the company will charge u too much if u are hard bricked

No.. phone repair stores cant help you.
You have to do it yourself or take it to LG service centre.
First press Back + Vol up + Power button.. see if you get yellow emergency mode.
If no your phone is hard bricked.. no way to repair.. but stil search the forum.. see if you can make it work.
See if this helps
If emergency mode is working.. then you can easily recover your phone.
Here
Flash the recovery and then flash any rom of your choice!!

rr0yy said:
No.. phone repair stores cant help you.
You have to do it yourself or take it to LG service centre.
First press Back + Vol up + Power button.. see if you get yellow emergency mode.
If no your phone is hard bricked.. no way to repair.. but stil search the forum.. see if you can make it work.
See if this helps
If emergency mode is working.. then you can easily recover your phone.
Here
Flash the recovery and then flash any rom of your choice!!
Click to expand...
Click to collapse
i have said the same thing man

[Completed] Asus Padfone X - soft-bricked

Hello,
thank you for taking the time to read and try to help.
I got an Asus Padfone X from At&t and the refused to unlock it
Asus didnt help either.
not to bore you with details
but here is my noobish mistake tool form, i flashed the asus kernel .zip file to the bootloader using twrp.
now phone wont boot into recovery or bootloader
got the minimal tool which as you know include fastboot and ADB
but it wont detect the device ( it detected it before when i rooted the phone )
I made a backup before i flashed , but the problem i cant flash it to a device that wont go to bootloader or recovery
and wont be detected by ADB.
please guide this lost noob.

Hello Ultimician,
If your device cannot boot into recovery or bootloader it's a hardbrick. Flashing the wrong kernel will cause your device to hardbrick.
You probably still have a warranty, I'd go to your service provider and play dumb: "One day my phone just didn't turn on, I've tried everything even charging it."
If you know of someone that could JTAG your device you could go to them that might work, what the manufacture usually do is they replace the whole motherboard. ( What Samsung did when I bricked my device in any case.. )
Otherwise you could refer to these threads, be careful though they are not necessarily for your device. ( But they might be of help )
[GUIDE] Z Ultra and Z1 HARD BRICK RECOVERY
[Galaxy S III][IMPORTANT] GT-I9300 Hard Brick Fix
[GUIDE]Unbrick a Hard Bricked SPRINT Galaxy S3 (Without JTAG)
Best of luck mate!

thanksfor the swift assistance
thank you kindly
amazon offered me a refund
i will take my chances

Carefully when they send a device back to the maker they can often pull information.like last install and all of that. If you had a back up. I would try to flash the stock firmware. They are ways to do this with jig and other tools. I would try to flash stock every way I could before I take it back. I had s3 and bricked it long time ago.after many hours of reading I fixed it. Please always when flashing make sure it's for your device. Wish you luck2

[Q] Celkon A119Q - Hard Bricked my Daughter's Phone :( Help

Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.

Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...

N'ayam Amarsh'e said:
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
Click to expand...
Click to collapse
he was trying to install a custom ROM and flashed the PRELOADER first...the process stopped halfway through and the phone has been bricked ever since.. :crying:

rakave said:
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Click to expand...
Click to collapse
did you try to restock it.. installing a stock rom is the last option if available.. if the phone is not even turning on, check battery.. make sure your battery is charged..
and at last.. you could just try taking it to the service center if it's in warrenty.. but make sure it doesn't turn on.. don't tell them you were flashing.. they will never know.. hope it help in any way..
btw check out my signature...

Bricked ZTE Blade S6 after official update

Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers

adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
I have the same problem, did you find a solution?
cheers

Hi
I'm in the same situation, someone has a solution

Help
Me 2.
Help pls.
:crying:

Does it turn on but gets stuck while boot or it doesn't turn on at all?
Sent from my GT-S7262 using Tapatalk

Tali099 said:
Does it turn on but gets stuck while boot or it doesn't turn on at all?
Sent from my GT-S7262 using Tapatalk
Click to expand...
Click to collapse
Hi Tali099 and sorry for my terrible English.
No boot log and only black screen.
Absolutely dead !!!
when connected to pc, find the mobile as: qhsusb_bulk qualcomm 9008 com5.
I had try to unbrick it but unfortunately i didn't find any way to unbrick the chipset: Qualcomm MSM8939 Snapdragon 615 who have the zte blade s6.
Very deep hard brick. :crying:
Have you any idea how to unbrick it ???

I'm the same situation that you.
gining said:
Hi Tali099 and sorry for my terrible English.
No boot log and only black screen.
Absolutely dead !!!
when connected to pc, find the mobile as: qhsusb_bulk qualcomm 9008 com5.
I had try to unbrick it but unfortunately i didn't find any way to unbrick the chipset: Qualcomm MSM8939 Snapdragon 615 who have the zte blade s6.
Very deep hard brick. :crying:
Have you any idea how to unbrick it ???
Click to expand...
Click to collapse
I'm the same situation that you. I need several files for unbrick our phone but I don't found it. I have follow this tutorial: htcmania.com/showthread.php?t=924041

jjcc1999 said:
I'm the same situation that you. I need several files for unbrick our phone but I don't found it. I have follow this tutorial: htcmania.com/showthread.php?t=924041
Click to expand...
Click to collapse
I tried and this way but the "color" was only finds the com port and nothing else. Searching, I found for the "color" is only for chipset Msm8974 and not for ours chipset msm8939. We must look to find the way for unbrick our chipset (msm8939). unfortunately nothing i found as now.
If I can not do anything in the next few days, i will defamation the ZTE in all forums because our problem started from the ZTE proposal to upgrade our mobile with the new version.

gining said:
I tried and this way but the "color" was only finds the com port and nothing else. Searching, I found for the "color" is only for chipset Msm8974 and not for ours chipset msm8939. We must look to find the way for unbrick our chipset (msm8939). unfortunately nothing i found as now.
If I can not do anything in the next few days, i will defamation the ZTE in all forums because our problem started from the ZTE proposal to upgrade our mobile with the new version.
Click to expand...
Click to collapse
I agree with you because the web does not put any warning that may happen or specification in this regard.

Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers

I have exactly the same situation after an official upgrade via SD card..
Black screen will not power on only shows blue light when connected to a charger or laptop.
I have been waiting for over two weeks now for ZTE to provide a solution, nothing, all I get is we are looking into it..
Terrible service and certainly won't be buying any ZTE again

Guys so we are really dead, there is nothing to be done about this problem ? Is this hard-brick ? Any solution here ????

same here
my phone brick after repartition this dump phone
i forget to search that file first..

Please help me s6 was brick [email protected]

reply from ZTE
Hello,
I have been backwards and forwards with ZTE to get this problem resoved and still not sorted. They did send me some instructions of how to reset the device but it needs a piece of software to be able to do this and ZTE won't give it to me to try it out!!!!
I would upload it on here but it seems I am not allowed to or cannot find out how to do it.
This is so frustating!

I got the same problem (black screen) when after rooting and different experiment I tried to put the original ROM back which I downloaded from needrom. After 3 days of continuous searching, I concluded that I have damaged the eMMC Partition by installing a different firmware that was not suitable for my Europe version of Mobile.
This link was quite helpful to understand the problem.
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
To solve this problem first I need the 8939_msimage.mbn of Qualcomm 615 and related files. The other option is to use the service ROM and ZTE TOOL STUDIO, I am unable to find this ROM and other files to repair bootloader. If someone with working ZTE blade s6 or other Qualcomm 615 chipset phone can provide this, it would be really helpful.
Following files are required at least from a Qualcomm 615 MSM8939 Chipset.
8939_msimage.mbn
MPRG8939.mbn
patch0.xml
sahara.xml
rawprogram0.xml

Hello all, I have the same problem with my phone except that when it boot , it freezes on " ZTE screen" . What can I do ?

magicfab38 said:
Hello all, I have the same problem with my phone except that when it boot , it freezes on " ZTE screen" . What can I do ?
Click to expand...
Click to collapse
You can enter recovery mode Power On pressing volume up key.
Try "wipe cache partion" at first and if S6 still doesn't boot up, try next "wipe data/factory reset".
If both measures doesn't work, your system has damage from unknown reason.What change did you it?

I have the same problem
:crying:
adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse

adamfoulkes said:
Hi
I updated my Phone today using an SD card from the zte website. All was going well and then the screen went off and now I can't start the phone. I have tried a hard reset but it's dead!
Any ideas? Gutted as it's almost new!
Please help if you can.
Cheers
Click to expand...
Click to collapse
Did you find a solution ?
---------- Post added at 07:32 PM ---------- Previous post was at 07:17 PM ----------
safderali5 said:
I got the same problem (black screen) when after rooting and different experiment I tried to put the original ROM back which I downloaded from needrom. After 3 days of continuous searching, I concluded that I have damaged the eMMC Partition by installing a different firmware that was not suitable for my Europe version of Mobile.
This link was quite helpful to understand the problem.
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
To solve this problem first I need the 8939_msimage.mbn of Qualcomm 615 and related files. The other option is to use the service ROM and ZTE TOOL STUDIO, I am unable to find this ROM and other files to repair bootloader. If someone with working ZTE blade s6 or other Qualcomm 615 chipset phone can provide this, it would be really helpful.
Following files are required at least from a Qualcomm 615 MSM8939 Chipset.
8939_msimage.mbn
MPRG8939.mbn
patch0.xml
sahara.xml
rawprogram0.xml
Click to expand...
Click to collapse
Hi bro did you find a solution to unbrick the zte blade s6 ?

Intex Cloud Force

Hello guys.. I used spreadtrum tool to flash .pac file of my stock rom to my intex cloud force phone disconnected in between the process and now the phone does not boot at all.
please friends help me, what i can do to fix it.
Thank you.

anakshiant said:
Hello guys.. I used spreadtrum tool to flash .pac file of my stock rom to my intex cloud force phone disconnected in between the process and now the phone does not boot at all.
please friends help me, what i can do to fix it.
Thank you.
Click to expand...
Click to collapse
If it won't turn on, won't boot to any of its modes, won't charge, has no LED while connected to charger, won't connect to PC and doesn't show in device manager on PC, then unfortunately it's hard bricked, you can't fix it yourself, you'll have to take it to a professional shop for either a JTAG service or a new motherboard.
Sent from my SM-S903VL using Tapatalk