Dear All,
Now I got a Karbonn A9+ in dead condition and i try to put download mode but it does not works.
The phone totally in dead condition,And i trying to connect with usb cable to pc it only shows (ZEUS FLASH DEVICE) in device manager.
And i try tried for solution in forum and google , no solution is found.
If anyone have the solution Pls share here.
Thanks in Advance.
Br,
Kannan.
serviceworld87 said:
Dear All,
Now I got a Karbonn A9+ in dead condition and i try to put download mode but it does not works.
The phone totally in dead condition,And i trying to connect with usb cable to pc it only shows (ZEUS FLASH DEVICE) in device manager.
And i try tried for solution in forum and google , no solution is found.
If anyone have the solution Pls share here.
Thanks in Advance.
Br,
Kannan.
Click to expand...
Click to collapse
First of all check it have qualcomm cpu inside..
Second install the driver of a9+ for qualcomm device
As i know it should show some "qload downloader 9006"
In device manager.
Related
Hi, I have a big problem with my new Phone Feiteng H7100! After I flashed the ROM (from needrom), nothing happens on the phone! Everything went as described until the green circle. Nothing now … when connected to the PC appears a USB / network device name: Alcatel Single RNDIS interface, nothing more happens.
Can someone help me here? Please
jemmars
Hello everyone,
can anyone help me here really? I've also, quite diligently search through the forums for possible solutions, but I have not found anything. Please, please help me with my phone ... where I still have birthday ... your help I would be today's greatest gift!
Did you tried to reflash with another ROM?
Maybe this will help you: http://forum.xda-developers.com/showthread.php?t=2186116
Please post your experience.
hi, can anyone help me, i have a feiteng h7100, totally bricked, not turn it on, the computer dont recognize, is a dead phone, i flash it with sp flashtool first time says ok, but no turn it on, so i flash it again, in the middle of flashing says error and the cpu dont recognize any more my phone, any ideas..
never flash DSP_BL and preloader. as long as the device is recognized on your PC, its not "dead" othewise you can try the "testpoint" methode, but not all motherboards have one.
Hi there,
I was trying to root my panasonic p31 so I downloaded this software called KINGOAPP
but it was not connecting cuz i didnt have a driver for my phone to get connected. I tried to find everywhere.
Could not find anywhere!!!! Please Help
Thanks in advance.
viper_swipe said:
Hi there,
I was trying to root my panasonic p31 so I downloaded this software called KINGOAPP
but it was not connecting cuz i didnt have a driver for my phone to get connected. I tried to find everywhere.
Could not find anywhere!!!! Please Help
Thanks in advance.
Click to expand...
Click to collapse
http://www.driverscape.com/download/panasonic-p31
I have to register to download the drivers!!!
Common just to download the drivers for my phone , Im not gonna Pay money
stock firmware
guys my phone got always got hanging so plz anyone post the tutorial of installing stock firmware:crying:
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
N'ayam Amarsh'e said:
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
Click to expand...
Click to collapse
he was trying to install a custom ROM and flashed the PRELOADER first...the process stopped halfway through and the phone has been bricked ever since.. :crying:
rakave said:
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Click to expand...
Click to collapse
did you try to restock it.. installing a stock rom is the last option if available.. if the phone is not even turning on, check battery.. make sure your battery is charged..
and at last.. you could just try taking it to the service center if it's in warrenty.. but make sure it doesn't turn on.. don't tell them you were flashing.. they will never know.. hope it help in any way..
btw check out my signature...
I just recently flashed a ROM for my watch , it has the MT6260A chipset , so I opened flash tools and flashed a firmware , but I got an error message and then it was stuck so I removed the USB and then the watch never switched on again , when I connect it to PC , it doesn't recognize and it and it says unknown device in device manager , and then in flash tools it says unable to open com port
http://cloud.tapatalk.com/s/5878ba09dc795/IMG_20170113_164724.jpg?
Plz help me ASAP
Thanks
Sent from my Letv X509 using Tapatalk
Snehil_DPS_6l said:
I just recently flashed a ROM for my watch , it has the MT6260A chipset , so I opened flash tools and flashed a firmware , but I got an error message and then it was stuck so I removed the USB and then the watch never switched on again , when I connect it to PC , it doesn't recognize and it and it says unknown device in device manager , and then in flash tools it says unable to open com port
http://cloud.tapatalk.com/s/5878ba09dc795/IMG_20170113_164724.jpg?
Plz help me ASAP
Thanks
Sent from my Letv X509 using Tapatalk
Click to expand...
Click to collapse
I see you're getting help in this thread: https://forum.xda-developers.com/smartwatch/other-smartwatches/gt08-smart-watch-t3053196/page82
Please don't post the same question in multiple forums.
Thread closed.
Hello guys.. I used spreadtrum tool to flash .pac file of my stock rom to my intex cloud force phone disconnected in between the process and now the phone does not boot at all.
please friends help me, what i can do to fix it.
Thank you.
anakshiant said:
Hello guys.. I used spreadtrum tool to flash .pac file of my stock rom to my intex cloud force phone disconnected in between the process and now the phone does not boot at all.
please friends help me, what i can do to fix it.
Thank you.
Click to expand...
Click to collapse
If it won't turn on, won't boot to any of its modes, won't charge, has no LED while connected to charger, won't connect to PC and doesn't show in device manager on PC, then unfortunately it's hard bricked, you can't fix it yourself, you'll have to take it to a professional shop for either a JTAG service or a new motherboard.
Sent from my SM-S903VL using Tapatalk