[Completed] Bricked GT08 - XDA Assist

I just recently flashed a ROM for my watch , it has the MT6260A chipset , so I opened flash tools and flashed a firmware , but I got an error message and then it was stuck so I removed the USB and then the watch never switched on again , when I connect it to PC , it doesn't recognize and it and it says unknown device in device manager , and then in flash tools it says unable to open com port
http://cloud.tapatalk.com/s/5878ba09dc795/IMG_20170113_164724.jpg?
Plz help me ASAP
Thanks
Sent from my Letv X509 using Tapatalk

Snehil_DPS_6l said:
I just recently flashed a ROM for my watch , it has the MT6260A chipset , so I opened flash tools and flashed a firmware , but I got an error message and then it was stuck so I removed the USB and then the watch never switched on again , when I connect it to PC , it doesn't recognize and it and it says unknown device in device manager , and then in flash tools it says unable to open com port
http://cloud.tapatalk.com/s/5878ba09dc795/IMG_20170113_164724.jpg?
Plz help me ASAP
Thanks
Sent from my Letv X509 using Tapatalk
Click to expand...
Click to collapse
I see you're getting help in this thread: https://forum.xda-developers.com/smartwatch/other-smartwatches/gt08-smart-watch-t3053196/page82
Please don't post the same question in multiple forums.
Thread closed.

Related

[Completed] Help ! Yu Yureka hard bricked. PC can't recognize any qualcomm port.

Hello Peeps.
In an attempt to update my rooted Yu yureka from 4.4 MiUi to cyanogen 12 official from fastboot , however the update completed successfully , the device got bricked and never turned on after that .
Nothing works , the phone isnt turning on , no fastboot , not even the light on the led is turning on when i connect it to charging or with PC . The PC isnt recognising if any device is connected to it when i connect my phone to my pc . There is hope with qualcomm emergency flash tool but for that my device needs to be connected to my pc with a port, which is not happening here .
Any help in any direction is highly appreciated. Thanks.
Edit: Yu Yureka aftersales is **** . No one responds to calls , no one replies to mails .There are no service centers. Nothing . Its a dead end here. :crying:
Hi, thank you for using XDA Assist. I found this which sounds exactly what you need, http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Good luck!
Thread closed.

[Completed] [Q] i can't open htc sensation xl after downloading new rom it freezes on 1st logo !

hi everyone
i downloaded new rom through this link:
http://forum.xda-developers.com/showthread.php?t=1910346
after downloading flashed it in recovery mode and installed it successfully but when i rebooted to discover the new rom
i pressed the power bottom the screen opened normally on the Htc logo then vibrated for almost 5 or 6 times then nothing happened after this even for next year , it freezes and i can't do anything or even get the recovery mode and when i connect the device via USB with computer , it can't read it , also when i connect the USB to charge , it also vibrate 5 or six time then nothing happens again please anyone help me and tell me what to do as fast as you can
Suman117 said:
dont't panic it happens sometimes jst download the stock rom for your mobile and flsh it via sp tool (PC)
Click to expand...
Click to collapse
thanks bro i tried hard to find stock rom and found one with 2 bugs but it doesn't matter now maybe i can fix it later after downloading rom and know how to flash it with your way that u told me ..
but now sp tool you mean such odin ? i have never tried to do this technique via PC if you can help me more please tell me how to do this via odin or any prog that you meant
thanks
Hi there,
The best place for this device specific question is here:
[Q&A] [ROM][01-Oct] MIUI XL
For any other question please ask directly here:
Sensation XL Q&A
Good luck

Help me please , phone corrupted after 5 months from installing custom ROM LOLIPOP

Hello all , i've installed Custom ROM LOLIPOP according to tutorial on this forum , but after 5 months i woke up and found my phone all service has been stopped , i've restarted the phone , but the phone was stuck at Sony logo , and nothing happens , i've tried to flash the ROM files again but i got message ' Ooops , You did it again ' , i went to someone that work on mobile phone development , and he told me that the RAM has been corrupted , but i'm not sure of what he said , i can open recovery mode , but i can't do anything , please help me , i've tried to connect phone to PC by Emma Sony program , it recognized the phone model and serial number but it told me message that mobile is locked , please help me
[email protected] said:
Hello all , i've installed Custom ROM LOLIPOP according to tutorial on this forum , but after 5 months i woke up and found my phone all service has been stopped , i've restarted the phone , but the phone was stuck at Sony logo , and nothing happens , i've tried to flash the ROM files again but i got message ' Ooops , You did it again ' , i went to someone that work on mobile phone development , and he told me that the RAM has been corrupted , but i'm not sure of what he said , i can open recovery mode , but i can't do anything , please help me , i've tried to connect phone to PC by Emma Sony program , it recognized the phone model and serial number but it told me message that mobile is locked , please help me
Click to expand...
Click to collapse
Since you can reach recovery mode,
Try flashing the rom I released few days ago in the development section.
Press thanks if I helped you
Sent from my C2305 using Tapatalk
abhishekr700 said:
Since you can reach recovery mode,
Try flashing the rom I released few days ago in the development section.
Press thanks if I helped you
Sent from my C2305 using Tapatalk
Click to expand...
Click to collapse
Dear , i appreciate your help, i have flashed your wonderful ROM, but it stops at 45% Extract:/system/lib/libicui18n.so , i've waited about 30 mins but nothing happens , i've tried it again and the same situation happened.
I just want to tell you that when checking system info menu item i got that system size used and free : -1 MB and internal size the same : -1 MB , Would it help ?
Thanks in advance.
[email protected] said:
Dear , i appreciate your help, i have flashed your wonderful ROM, but it stops at 45% Extract:/system/lib/libicui18n.so , i've waited about 30 mins but nothing happens , i've tried it again and the same situation happened.
I just want to tell you that when checking system info menu item i got that system size used and free : -1 MB and internal size the same : -1 MB , Would it help ?
Thanks in advance.
Click to expand...
Click to collapse
First of all to say thanks,you can press the thanks button on his/her post,it helps keeping xda clean and on track.
Now as for your problem what I think is that your system partition memory has corrupted,
Recovery is stored on separate partition so you are still able to access it.
Elsewhere your motherboard and all is intact cause you can run the rom installer and execute commands to.
I strongly recommend getting your phone to a service centre for help,
Noone here(I guess) can help you deal with hardware issues.
One more thing, have you tried restoring your system via wmshua flash tool,
You can find its tutorial easily in the forum. Try it before spending money
Press the thanks button if I helped you.
Sent from my C2305 using Tapatalk

[Completed] Cannot flash phone from edl mode plz help

i have my phone bootlooped or phone doesnt start shows mi logo and turn off.
i have redmi note 3 32 gb qulcom .so i downloaded the latest developer fastboot rom from official website .
then entered the edl mode and got the phone name in device manager and used the mi flash tool beta to flash the fastboot rom
WHEN I CLICK ON REFRESH IT SHOWS MY PHONE TOO AS COM10
but its showing "CANNOT READ FROM PORT COM 1O"
Any one plzz help .
XDA Visitor said:
i have my phone bootlooped or phone doesnt start shows mi logo and turn off.
i have redmi note 3 32 gb qulcom .so i downloaded the latest developer fastboot rom from official website .
then entered the edl mode and got the phone name in device manager and used the mi flash tool beta to flash the fastboot rom
WHEN I CLICK ON REFRESH IT SHOWS MY PHONE TOO AS COM10
but its showing "CANNOT READ FROM PORT COM 1O"
Any one plzz help .
Click to expand...
Click to collapse
Greetings and welcome to assist. Did you unlock your phone first on the xaiomi website ? Why not make an account and ask the experts here
http://forum.xda-developers.com/redmi-note-3/help
You will get plenty of assistance
Good Luck
Sawdoctor

[Completed] Nexus 4 Dead

Hello Friends,
Need your help in fixing my Nexus 4 Device
last time My Nexus 4 was running when i tried to install a custom Build rom (Nightly) from cynogenmod Using TWRP Recovery
now suddenly my nexus 4's USB port Stopped working but it was Charging ,
it doesnt work anymore Something went wrong and Now its NOT opening Recovery mode , Just blackScreen
It doest Detect my nexus 4 , I am able to open bootLoader Mode , but also it doesnt Detect fastboot Mode in my laptop.
it gives "Device Descrioptor request Failed error" i tried updating the drivers as well but doesnt work anymore
So i tried Changing the USB Port and replaced the part , but the problem remains the same ,
No Recovery , NO USB PORT.. Cant Fix my Nexus 4 Now
HELP ME GUYS ,
any suggestions would be appreciated .
Thanks
:crying::crying::crying::crying::crying::crying:
sarangd said:
Hello Friends,
Need your help in fixing my Nexus 4 Device
last time My Nexus 4 was running when i tried to install a custom Build rom (Nightly) from cynogenmod Using TWRP Recovery
now suddenly my nexus 4's USB port Stopped working but it was Charging ,
it doesnt work anymore Something went wrong and Now its NOT opening Recovery mode , Just blackScreen
It doest Detect my nexus 4 , I am able to open bootLoader Mode , but also it doesnt Detect fastboot Mode in my laptop.
it gives "Device Descrioptor request Failed error" i tried updating the drivers as well but doesnt work anymore
So i tried Changing the USB Port and replaced the part , but the problem remains the same ,
No Recovery , NO USB PORT.. Cant Fix my Nexus 4 Now
HELP ME GUYS ,
any suggestions would be appreciated .
Thanks
:crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Hello,
It seems more like a USB issue.
Please refer here https://forum.xda-developers.com/android/general/fix-unknown-usb-device-device-t3375320
Regards
Vatsal,
Forum Moderator.
Vatsal said:
Hello,
It seems more like a USB issue.
Please refer here https://forum.xda-developers.com/android/general/fix-unknown-usb-device-device-t3375320
Regards
Vatsal,
Forum Moderator.
Click to expand...
Click to collapse
hello Vatsal
It did tried this already , this didnt worked for me ..
:'(

Categories

Resources