hi everyone
i downloaded new rom through this link:
http://forum.xda-developers.com/showthread.php?t=1910346
after downloading flashed it in recovery mode and installed it successfully but when i rebooted to discover the new rom
i pressed the power bottom the screen opened normally on the Htc logo then vibrated for almost 5 or 6 times then nothing happened after this even for next year , it freezes and i can't do anything or even get the recovery mode and when i connect the device via USB with computer , it can't read it , also when i connect the USB to charge , it also vibrate 5 or six time then nothing happens again please anyone help me and tell me what to do as fast as you can
Suman117 said:
dont't panic it happens sometimes jst download the stock rom for your mobile and flsh it via sp tool (PC)
Click to expand...
Click to collapse
thanks bro i tried hard to find stock rom and found one with 2 bugs but it doesn't matter now maybe i can fix it later after downloading rom and know how to flash it with your way that u told me ..
but now sp tool you mean such odin ? i have never tried to do this technique via PC if you can help me more please tell me how to do this via odin or any prog that you meant
thanks
Hi there,
The best place for this device specific question is here:
[Q&A] [ROM][01-Oct] MIUI XL
For any other question please ask directly here:
Sensation XL Q&A
Good luck
Related
Hey guys,
Im new to xda-developers, and also a noob with my galaxy s plus, just got it one week ago .
And how it had come, i tried to flash my i9001 with Gingerbread 2.3.4 (XXKP4) from samfirmware.com.
OK, first i put my phone into download mode, connected it to my pc, and started flashing with odin multi downloader 4.33. i was wondering how long it took to transfer the data, but after 10 minutes there happened something, and it went on until system.ext4. Exactly at this point, after 1 hour (!) flashing, nothing happened anymore, i waited for one more hour, and finally disconnected my phone.
after trying to restart, the SAMSUNG logo appeared, and then then i saw the following logo:
At the left side is a mobile, at the right side a pc. there is an arrow, from mobile to pc, that is disturbed by a warning sign.
I can still enter download mode, but every try i did failed. always stops at the
system.ext4
file!
Pleeease, i need your help guys! i dont belive it is bricked, but dont know what to do now, already tried to flash original firmware, doenst work!!
greetings
nothing to worry about
since you still can enter the download mode u can flash ur device
try another computer or another os or try other usb ports
River99 said:
Hey guys,
Im new to xda-developers, and also a noob with my galaxy s plus, just got it one week ago .
And how it had come, i tried to flash my i9001 with Gingerbread 2.3.4 (XXKP4) from samfirmware.com....
Click to expand...
Click to collapse
that happens to me too, about few weeks ago.
what I did, I downloaded and re-flashed this one:
http://bit.ly/i9001firmware
If I can remember it right, that was 2.3.3 ~ after successfully re-flashing with the above firmware for around 10 minutes. I redo it again in 2.3.4 (I took my 2.3.4 from samfirmware too!)
by the way, if you are re-flashing using a desktop pc... I suggest for you to use the USB port that was built from the motherboard. It was more reliable than using a hub.
Hey guys, I have the same problem.. Can somebody pleaaaaaaaase tell me a good solution?
Vickoy, there is a password on the firmware.... Somebody PLEASE help me!
FlorisNL said:
Hey guys, I have the same problem.. Can somebody pleaaaaaaaase tell me a good solution?
Vickoy, there is a password on the firmware.... Somebody PLEASE help me!
Click to expand...
Click to collapse
Password is "samfirmware.com"
can't flash any firmware!
same problem here, wile trying to flash I9001XXKG1 I9001XXKG3 I9001XXKP4
odin cant' get past system.ext4 download.. or system.img.ext4 download..
then i close odin after 15min of waiting, flash it again with Boot_loader.tar
and phone boots normally
all firmwares from samfirmware
odin 4.43
update
this worked
http://forum.xda-developers.com/showpost.php?p=16695354&postcount=79
when flashing KP4 use .ops+boot+PDA then .ops+boot+CSC and so on
this works for me
Hello guys! I searched a lot before posting it here,but I'm very fearing a soft-hard brick..
I explain: I'm running Cyanogenmod 11 M7 (Htc One S, not version C2), and today I got an auto reboot. Now, I'm stuck in bootloop, without the power to enter bootloader or recovery with phone buttons. I tried adb and fastboot, but obviously the second can't run, the first can't run because pc can't install htc one s drivers. I tried to install them by my self (found here, in htc one s section) but adb still doesn't recognize my smarthphone.
What can I do? Please, I'm desperate.
Thanks a lot for every help You can give me and sorry if I choose the wrong section!
Massimo
Maioranoo91 said:
Hello guys! I searched a lot before posting it here,but I'm very fearing a soft-hard brick..
I explain: I'm running Cyanogenmod 11 M7 (Htc One S, not version C2), and today I got an auto reboot. Now, I'm stuck in bootloop, without the power to enter bootloader or recovery with phone buttons. I tried adb and fastboot, but obviously the second can't run, the first can't run because pc can't install htc one s drivers. I tried to install them by my self (found here, in htc one s section) but adb still doesn't recognize my smarthphone.
What can I do? Please, I'm desperate.
Thanks a lot for every help You can give me and sorry if I choose the wrong section!
Massimo
Click to expand...
Click to collapse
my pc didnt recognize my phone first time i used odin, try using another port
u could also flash new rom for ur device using odin
ive no responsibility about any damage in ur device!!! DO IT ON YOUR OWN RISK
Odin is for Samsung device!
Please, help me..
So guys,
After some ports, my XC2304 isn't able to run on flashmode to re-install firmware. Some days ago I create an ftf file for it be flashed by Perfect Flash, the results was sucessfully. Perharps, today I was porting a Z1 rom based on our last update .13. After install the rom by CMW the phone doesn't boot for anyway.
I tryed to reset by back button, no response;
I tryed to remove battery and no response;
I've tryed to boot into flash mode by pressing volume - but only stills on a red led.
I follow some tutorials but no one worked for me, the main problem is "device not recognized" by windows.
Can't connect on Perfect Flash\Sony Update service cause the flash mode doesn't appears.
Well, I was very excited to porting my new rom based on 4.3 AOSP, was some little bugs that I as just solving, but now I'm not able to continue my ports
If someone had the SAME problem and solved it, I'll be glad if you help me!
Best Regards.
sid_reis said:
So guys,
After some ports, my XC2304 isn't able to run on flashmode to re-install firmware. Some days ago I create an ftf file for it be flashed by Perfect Flash, the results was sucessfully. Perharps, today I was porting a Z1 rom based on our last update .13. After install the rom by CMW the phone doesn't boot for anyway.
I tryed to reset by back button, no response;
I tryed to remove battery and no response;
I've tryed to boot into flash mode by pressing volume - but only stills on a red led.
I follow some tutorials but no one worked for me, the main problem is "device not recognized" by windows.
Can't connect on Perfect Flash\Sony Update service cause the flash mode doesn't appears.
Well, I was very excited to porting my new rom based on 4.3 AOSP, was some little bugs that I as just solving, but now I'm not able to continue my ports
If someone had the SAME problem and solved it, I'll be glad if you help me!
Best Regards.
Click to expand...
Click to collapse
I did the same thing like you and had same issue.
Unfortunately, we cant use Flashtool/ SUS/ Perfect Flash to unbrick because there have no driver for our xc.
So, I sent back to SONY yesterday.
Fix your problem using this way
sid_reis said:
So guys,
After some ports, my XC2304 isn't able to run on flashmode to re-install firmware. Some days ago I create an ftf file for it be flashed by Perfect Flash, the results was sucessfully. Perharps, today I was porting a Z1 rom based on our last update .13. After install the rom by CMW the phone doesn't boot for anyway.
I tryed to reset by back button, no response;
I tryed to remove battery and no response;
I've tryed to boot into flash mode by pressing volume - but only stills on a red led.
I follow some tutorials but no one worked for me, the main problem is "device not recognized" by windows.
Can't connect on Perfect Flash\Sony Update service cause the flash mode doesn't appears.
Well, I was very excited to porting my new rom based on 4.3 AOSP, was some little bugs that I as just solving, but now I'm not able to continue my ports
If someone had the SAME problem and solved it, I'll be glad if you help me!
Best Regards.
Click to expand...
Click to collapse
I had the same problem some time ago but that can be fixed using
" Sony Update Services "....
For all step wise guide read my post and if you find it usefull... click that thanks please...
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
Do this before the above link :
remove your back panel and then put your Xperia C for charging and then hit the small reset button near Sim card slot using a pen or a refill; then wait for 5 resonds and stop charging... by this you will be able to switch off your Xperia C and then you can use the link provided above to for your problem
iSiddharth said:
I had the same problem some time ago but that can be fixed using
" Sony Update Services "....
For all step wise guide read my post and if you find it usefull... click that thanks please...
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
Do this before the above link :
remove your back panel and then put your Xperia C for charging and then hit the small reset button near Sim card slot using a pen or a refill; then wait for 5 resonds and stop charging... by this you will be able to switch off your Xperia C and then you can use the link provided above to for your problem
Click to expand...
Click to collapse
this method doesnt work when you flash a rom for a different device like i did i already order a new motherboard for my xc. this only will solve it...changing motherboard.
And by the way if Red Light is shown then it is Soft Brick and you can very easily repair it. If that light is also not there then you can say that it is a hard brick.
My Tablet was in the charger and it was turned off when i tried to power it , i found it was stuck in a boot loop
i tried to flash a stock ROM using using Odin 3.10 but still nothing changed,
i cant access the recovery mode using the power and volume up key,
but can access the download mode . please help me
Thank you
Got same problem
Ayman87 said:
My Tablet was in the charger and it was turned off when i tried to power it , i found it was stuck in a boot loop
i tried to flash a stock ROM using using Odin 3.10 but still nothing changed,
i cant access the recovery mode using the power and volume up key,
but can access the download mode . please help me
Thank you
Click to expand...
Click to collapse
I got same boot loop problem a week ago after installing a game. I couldn't get into recovery mode but I do have download mode. I have tried flash stock ROM multiple times and it always failed. Today, I brought my device to samsung service center. But guess what, even them couldn't help resolve the issue!!!
I hope someone here are able to help.
wiien said:
I got same boot loop problem a week ago after installing a game. I couldn't get into recovery mode but I do have download mode. I have tried flash stock ROM multiple times and it always failed. Today, I brought my device to samsung service center. But guess what, even them couldn't help resolve the issue!!!
I hope someone here are able to help.
Click to expand...
Click to collapse
Could they even identify the problem ?
Can you access Bootloader? And any custom recovery?
SuperMan(Alex) said:
Can you access Bootloader? And any custom recovery?
Click to expand...
Click to collapse
No i did n`t try , can u please refer to me a link , or explain to me what should i do exactly ?
Ayman87 said:
No i did n`t try , can u please refer to me a link , or explain to me what should i do exactly ?
Click to expand...
Click to collapse
and i cant use " USB Debugging"
http://forum.xda-developers.com/showthread.php?t=2102677
i tried this custom recovery but still looping
same here . i suggest trying different stock firmwares , if i get the fix for this problem i will tell u here
ameer3adel said:
same here . i suggest trying different stock firmwares , if i get the fix for this problem i will tell u here
Click to expand...
Click to collapse
Thank you
Ayman87 said:
Could they even identify the problem ?
Click to expand...
Click to collapse
Well, they said it hit the IC memory (cost around $200). so expensive :crying:
I've tried stock kitkat but still no luck
Ugh guys I'm having the same issues my tablet won't go pass Samsung Galaxy note 10.1 splash screen and can't stay on twrp recovery with out rebooting again. I tried to reflash twrp tar and stock firmware but it always fails and then my PC would say my USB driver or port is unrecognizable or malfunction so I bought another USB charging wire and tried it today and still get the same issues I hope someone can help me and us out asap!!
same here
Hi guys!
same here! my note was charging and I've found it stucked in samsung logo without any reason. I've tried to install almost every version available of stock rom also from different country but no way. I can install also custom recovery but unfortunately I don't have any custom rom to try to install in my sd card. At the current time I really thinking to move to new note 10.1 2014...I'm afraid is some kinda hardware malfunctions. Any update from you guys with same issue?
Andrea
afarnedi said:
Hi guys!
same here! my note was charging and I've found it stucked in samsung logo without any reason. I've tried to install almost every version available of stock rom also from different country but no way. I can install also custom recovery but unfortunately I don't have any custom rom to try to install in my sd card. At the current time I really thinking to move to new note 10.1 2014...I'm afraid is some kinda hardware malfunctions. Any update from you guys with same issue?
Andrea
Click to expand...
Click to collapse
Wow now I'm really start to think it is a Samsung and hardware issue I think these tablets weren't made to be usable for more than 2 years smh is anyone else with this issue running lollipop roms? Jc
The same here, My friend just conntect me, that SAMSUNG does not want to cover charges, due to bootloader says SYSTEM STATUS: custom.
And he never did anything with his tablet.
He got angry and Samsung check the hardware and they find that some chip is broken. But still don't want to fix it due to custom issue.
Hello Friends,
Need your help in fixing my Nexus 4 Device
last time My Nexus 4 was running when i tried to install a custom Build rom (Nightly) from cynogenmod Using TWRP Recovery
now suddenly my nexus 4's USB port Stopped working but it was Charging ,
it doesnt work anymore Something went wrong and Now its NOT opening Recovery mode , Just blackScreen
It doest Detect my nexus 4 , I am able to open bootLoader Mode , but also it doesnt Detect fastboot Mode in my laptop.
it gives "Device Descrioptor request Failed error" i tried updating the drivers as well but doesnt work anymore
So i tried Changing the USB Port and replaced the part , but the problem remains the same ,
No Recovery , NO USB PORT.. Cant Fix my Nexus 4 Now
HELP ME GUYS ,
any suggestions would be appreciated .
Thanks
:crying::crying::crying::crying::crying::crying:
sarangd said:
Hello Friends,
Need your help in fixing my Nexus 4 Device
last time My Nexus 4 was running when i tried to install a custom Build rom (Nightly) from cynogenmod Using TWRP Recovery
now suddenly my nexus 4's USB port Stopped working but it was Charging ,
it doesnt work anymore Something went wrong and Now its NOT opening Recovery mode , Just blackScreen
It doest Detect my nexus 4 , I am able to open bootLoader Mode , but also it doesnt Detect fastboot Mode in my laptop.
it gives "Device Descrioptor request Failed error" i tried updating the drivers as well but doesnt work anymore
So i tried Changing the USB Port and replaced the part , but the problem remains the same ,
No Recovery , NO USB PORT.. Cant Fix my Nexus 4 Now
HELP ME GUYS ,
any suggestions would be appreciated .
Thanks
:crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Hello,
It seems more like a USB issue.
Please refer here https://forum.xda-developers.com/android/general/fix-unknown-usb-device-device-t3375320
Regards
Vatsal,
Forum Moderator.
Vatsal said:
Hello,
It seems more like a USB issue.
Please refer here https://forum.xda-developers.com/android/general/fix-unknown-usb-device-device-t3375320
Regards
Vatsal,
Forum Moderator.
Click to expand...
Click to collapse
hello Vatsal
It did tried this already , this didnt worked for me ..
:'(