Database Info

[HELP] Acer s200 update rom fail

I have try to flash the unofficial rom. However, the phone rebooted during the update process. Now, my Acer s200 only can display the splash screen and cannot go into windows...
Anyways can flash the rom again?? I tried to use Acer_EUU.exe, but it need to detect the phone by Activesync. Anyways can flash the rom bypass activesync?

Some problem....

Hi!
I tried to flash from original EN ROM version on RU version and had the same problem - the device displayed Windows splash screen and then just reboot. So, I was confused but I didn't stop this process and after half an hour Windows loaded...(during this time I removed he battery and pushed soft-reset button a lotof times).
So, my only advice is to try to wait with re-booting device till the Windows boot and then to flash the original ROM (if you'll find it).
For me - after I loaded RU version of Windows I just flashed for custom EN ROM and it was OK (without this issue).
Good Luck!

It solves your problem..
DimICE said:
Hacked ACER_EUU.exe
Link: http://www.mediafire.com/?wy2yynnjz2z
ActiveSync connection is not needed!
Also is not needed to edit version.txt..
Just replace original ACER_EUU.exe with this file, execute it. Press next,next,ok,ok.. Message "Waiting for download mode coming" appear..
Power your Acer s200 with Power+Camera buttons pressed and connect to computer.
Tested on 2 acer s200 phones
Sorry for my English)))
Click to expand...
Click to collapse

link not working ( http://www.mediafire.com/?wy2yynnjz2z )

http://dimice.ru/ACER_EUU.exe

Rom update can be computer's fault
DimIce's program works perfectly. I've thought I bricked my phone many times, but always have been able to recover. This is what I recently discovered. In the middle of a flash, my computer said "write error". 'Thought my phone would stay dead. Finally, I switched to another computer and flashed the phone with no problem. So if you suffer a bad flash, simply change computers. If none is available, reboot your computer to clear the memory, etc. (by the way I'm using Windows 7 x64) and try again - sometimes even changing the USB port might help. The phone excels in it's ability to be re-flashed -even if you suffer disaster in the middle of a procedure.

As we dedicate only to HTC devices you won´t get too much attention.
Better try here:
http://www.eten-users.eu/
Good luck,

orb3000 said:
As we dedicate only to HTC devices you won´t get too much attention.
Better try here:
http://www.eten-users.eu/
Good luck,
Click to expand...
Click to collapse
Ignore this guy he has a bot setup for posting this on everyone that has 1 post or is posting in general or Upgrading, Modifying and Unlocking, You need to flash a rom based of the 1.00 oem drivers, flash this rom: http://forum.xda-developers.com/showthread.php?t=596304 and all of your problems will be solved, if not let me know and il help you out.

rafyvitto said:
Ignore this guy he has a bot setup for posting this on everyone that has 1 post or is posting in general or Upgrading, Modifying and Unlocking, You need to flash a rom based of the 1.00 oem drivers, flash this rom: http://forum.xda-developers.com/showthread.php?t=596304 and all of your problems will be solved, if not let me know and il help you out.
Click to expand...
Click to collapse
If you have any problem please take it to the council.
my only intention is to let new members know that this is an HTC forum only!
So they don't waste their time
If that bothers you, shame...

XDA has never meant to be HTC only.
Just open your eyes, dear sir.

I have a problem with the installation romu message pops up to me(sorry acer usb host driver must be installed in windows xp sp2 or later version please update os version to windows sp2)

stuck on clean boot screen
Hi, i was updating from EUU_Acer_S200_3.003b.00_EN_03.03.08_3.003.01_20100119 to EUU_Acer_S200_3.003c.00_ES_03.03.08_3.003c.00_20100201 but accidentally closed the acer's application, so the phone is stuck on "clean boot" screen? what should i do?, thank you!

PLEASE HELP, rooted optimus one p500 doesn't boot up! :'(

Ok, I am new to this so excuse me for any stupid mistakes, please.
So, last night I rooted my optimus one (p500) using z4root. Everything went fine, I got myself a rooted phone and I started messing around. I had no problems till I installed Rom Manager today. It asked me to install ClockWork Mod (something like this), I couldn't find my phone but I selected "Dell Streak" anyway! (I know, it's stupid!)
So, my phone restarts, LG logo comes up and goes and now I'm stuck on a screen that says:
Fastboot mode started
udc_start()
That's it, nothing else, am not able to do anything. What to do now? I've been searching the net for ages now but no help. Please, I need some help. I can't even get a new phone because I'm 15 and my parents won't buy me one! Please, help!!

well, I took it to the LG Service Center and they are gonna replace my phone!! yeii!

Same problem here.
What did you tell the service centre guys?
Did they buy it? Didn't they ask if you'd rooted/messed the phone?

sorry to resurrect an old thread...anyone else experiences this fastboot mode. easy fix. open androidsdk manager and a cmd prompt with admin escalation, then change the prompt to the sdk installed platform-tools directory and run ../tools/fastboot.exe reboot or reboot-bootloader. one of those commands rebooted my phone properly and up to its flaked out rom. which i proceeded to remove and today updated to the latest official stock 2.3.3 for my optimus one.

sujal said:
Ok, I am new to this so excuse me for any stupid mistakes, please.
So, last night I rooted my optimus one (p500) using z4root. Everything went fine, I got myself a rooted phone and I started messing around. I had no problems till I installed Rom Manager today. It asked me to install ClockWork Mod (something like this), I couldn't find my phone but I selected "Dell Streak" anyway! (I know, it's stupid!)
So, my phone restarts, LG logo comes up and goes and now I'm stuck on a screen that says:
Fastboot mode started
udc_start()
That's it, nothing else, am not able to do anything. What to do now? I've been searching the net for ages now but no help. Please, I need some help. I can't even get a new phone because I'm 15 and my parents won't buy me one! Please, help!!
Click to expand...
Click to collapse
next time, search this up theres a thread in our own forum that covers this:
http://forum.xda-developers.com/showthread.php?t=1015332

htc screen with four triangles

Hi there.
I'm new here and in big trouble. Can you please help me with my HTC Desire.
I was trying to load custom ROm and something went wrong, now I'm stuck with HTC screen with four triangels, and no idea on how to fix it.
Can you please help me. Allready looked at this forum but nothing works for me.
can you please give me step by step guide? here are two pictures of what is going on.
PLEASE HELP me, it's very important to me.

tonicro said:
Hi there.
I'm new here and in big trouble. Can you please help me with my HTC Desire.
I was trying to load custom ROm and something went wrong, now I'm stuck with HTC screen with four triangels, and no idea on how to fix it.
Can you please help me. Allready looked at this forum but nothing works for me.
can you please give me step by step guide? here are two pictures of what is going on.
PLEASE HELP me, it's very important to me.
Click to expand...
Click to collapse
This is RUU mode. If you plug into your PC
Code:
fastboot reboot
will reboot your phone. However you will then need to go to recovery and flash a rom probably. If the above command doesn't work, you need to find a stock RUU for your device and flash it.

MacHackz said:
This is RUU mode. If you plug into your PC
Code:
fastboot reboot
will reboot your phone. However you will then need to go to recovery and flash a rom probably. If the above command doesn't work, you need to find a stock RUU for your device and flash it.
Click to expand...
Click to collapse
thank you for your reply. Tried Bortak's guide and flashed an RUU, and it worked .
thank you guys for all the help

[Q] MTK X920e Android not booting?

Hello Everyone. I am new to XDA. I have posted this question on the advice of a XDA member. My question is that I have an Android Device (MTK) (Not Sure MTK XXXX). Although I know that it is X920E, the copy of HTC Butterfly. By mistake I have manually changed its bootanimation and as a result it is not booting, got stuck at HTC Logo (The new animation which I have downloaded). I thought it safer to take it to the shop but after 3-4 days they returned the phone saying that it is irrepairable. I tried on my own but now the device just stuck at Android Logo. (Shopman must have messed with it). So please can you help me to make my android relive. I had connected it with my PC but because of no driver I cannot proceed. So please, someone kind enough to provide a link to the drivers (X920e-MTK -China Phone) and also steps to flash a rom on it.
Thnx in advance. Looking forward for your reply.
Also do let me know is you need some other information.

[Completed] [Q] i can't open htc sensation xl after downloading new rom it freezes on 1st logo !

hi everyone
i downloaded new rom through this link:
http://forum.xda-developers.com/showthread.php?t=1910346
after downloading flashed it in recovery mode and installed it successfully but when i rebooted to discover the new rom
i pressed the power bottom the screen opened normally on the Htc logo then vibrated for almost 5 or 6 times then nothing happened after this even for next year , it freezes and i can't do anything or even get the recovery mode and when i connect the device via USB with computer , it can't read it , also when i connect the USB to charge , it also vibrate 5 or six time then nothing happens again please anyone help me and tell me what to do as fast as you can

Suman117 said:
dont't panic it happens sometimes jst download the stock rom for your mobile and flsh it via sp tool (PC)
Click to expand...
Click to collapse
thanks bro i tried hard to find stock rom and found one with 2 bugs but it doesn't matter now maybe i can fix it later after downloading rom and know how to flash it with your way that u told me ..
but now sp tool you mean such odin ? i have never tried to do this technique via PC if you can help me more please tell me how to do this via odin or any prog that you meant
thanks

Hi there,
The best place for this device specific question is here:
[Q&A] [ROM][01-Oct] MIUI XL
For any other question please ask directly here:
Sensation XL Q&A
Good luck