I used Wugfresh's Bacon Root Toolkit to root my phone. I unlocked my bootloader and rooted my phone correctly and even got a confirmation by the toolkit saying that my phone was successfully rooted. However, my phone has been stuck on the CYANOGEN MOD READY for the last 30 minutes. How do I fix this?!
yqazi27 said:
I used Wugfresh's Bacon Root Toolkit to root my phone. I unlocked my bootloader and rooted my phone correctly and even got a confirmation by the toolkit saying that my phone was successfully rooted. However, my phone has been stuck on the CYANOGEN MOD READY for the last 30 minutes. How do I fix this?!
Click to expand...
Click to collapse
You should never use toolkits for rooting!
Now you need to flash TWRP recovery and flash any stock/custom rom as you like.
Flashing recovery wouldn't be much of a issue as your bootloader is already unlocked.
Mr.Ak said:
You should never use toolkits for rooting!
Now you need to flash TWRP recovery and flash any stock/custom rom as you like.
Flashing recovery wouldn't be much of a issue as your bootloader is already unlocked.
Click to expand...
Click to collapse
Darn
I tried using fastboot to install TWRP and I used TWRP to flash SuperSU. After rebooting, I had the same problem.
My phone is running CyanogenOS 13.1
yqazi27 said:
Darn
I tried using fastboot to install TWRP and I used TWRP to flash SuperSU. After rebooting, I had the same problem.
My phone is running CyanogenOS 13.1
Click to expand...
Click to collapse
Fek all that;
Just use kingoroot or kingroot(google it).
Make sure you've a fast connection.
And if you want to change from kinguser to supersu,use this guide..
https://forum.xda-developers.com/ca...ck-switch-kingroot-to-supersu-easily-t3426965
Mr.Ak said:
Fek all that;
Just use kingoroot or kingroot(google it).
Make sure you've a fast connection.
And if you want to change from kinguser to supersu,use this guide..
https://forum.xda-developers.com/ca...ck-switch-kingroot-to-supersu-easily-t3426965
Click to expand...
Click to collapse
I tried installing it but KINGROOT says there is no adaptation(root) available for A0001 Oneplus One
yqazi27 said:
I tried installing it but KINGROOT says there is no adaptation(root) available for A0001 Oneplus One
Click to expand...
Click to collapse
Use kingoroot latest version.
I'm sure one of it will work.
Mr.Ak said:
Use kingoroot latest version.
I'm sure one of it will work.
Click to expand...
Click to collapse
KINGOROOT didn't work either
yqazi27 said:
KINGOROOT didn't work either
Click to expand...
Click to collapse
Ok so I flashed back to CyanogenOS 11 and installed root and it worked. Then I went into TWRP and installed the CyanogenOS 13 zip. My device booted but my root access was gone. How do I update from COS 11 to COS 13 and still retain root? Also, TWRP asked to install SuperSU to root. I clicked no since my device was already rooted. Should I try again and click yes?
yqazi27 said:
Ok so I flashed back to CyanogenOS 11 and installed root and it worked. Then I went into TWRP and installed the CyanogenOS 13 zip. My device booted but my root access was gone. How do I update from COS 11 to COS 13 and still retain root? Also, TWRP asked to install SuperSU to root. I clicked no since my device was already rooted. Should I try again and click yes?
Click to expand...
Click to collapse
No,the root will not survive a clean flash.
Why don't you root cos13.1.x with twrp?
Mr.Ak said:
No,the root will not survive a clean flash.
Why don't you root cos13.1.x with twrp?
Click to expand...
Click to collapse
First of all, I did a dirty flash. Second if I SuperSU zip from TWRP while running COS13.1.2, my device gets stuck in a bootloop.
yqazi27 said:
First of all, I did a dirty flash. Second if I SuperSU zip from TWRP while running COS13.1.2, my device gets stuck in a bootloop.
Click to expand...
Click to collapse
Dirty flash of what?
I'm not talking about SuperSu.zip,Twrp has inbuilt root script,use that.
Flashing SuperSU will cause bootloop in Cm13 buddy.
Kalyan nath said:
Flashing SuperSU will cause bootloop in Cm13 buddy.
Click to expand...
Click to collapse
Are you sure you used latest SuperSU?
giaur said:
Are you sure you used latest SuperSU?
Click to expand...
Click to collapse
Yeah.
are you getting a bootloop or stuck at OnePlus bootlogo? i had a similar problem with SuperSU 2.78 and 2.79 besides i use MultiROM. after flashing a new 7.X ROM and SuperSU i got stuck at OPOs bootlogo.
by the way: never use toolkits
Sent from my One
Related
Does anyone have a safe way to root it? I had another rom with root included, but official cm13 hasn't. I tried to flash the supersu update zip, but it gave me a bootloop. I am not able to find a working method. thanks in advance
Enable root
Have you tried enabling root in developer options? CM is supposed to have in-built root. I'm still on CM12.1 though.
Dnlz said:
Have you tried enabling root in developer options? CM is supposed to have in-built root. I'm still on CM12.1 though.
Click to expand...
Click to collapse
..................
Thank you. It is always so easy and I try it the hard way.
Relates Problem
PureChris said:
Does anyone have a safe way to root it? I had another rom with root included, but official cm13 hasn't. I tried to flash the supersu update zip, but it gave me a bootloop. I am not able to find a working method. thanks in advance
Click to expand...
Click to collapse
I did the same and it gave me a bootloop do you know any way how to get out of that..??
Reflash rom
yonimish said:
I did the same and it gave me a bootloop do you know any way how to get out of that..??
Click to expand...
Click to collapse
You'll have to re-flash your rom and don't flash SuperSU, use CM's inbuilt root as I stated above.
Everything is in the title how to root an updated to marshmallow 6045i.
Thanks
wiwild said:
Everything is in the title how to root an updated to marshmallow 6045i.
Thanks
Click to expand...
Click to collapse
Just flash this Supersu
https://download.chainfire.eu/751/SuperSU/
other versions not works
Alek Dev said:
Just flash this Supersu
https://download.chainfire.eu/751/SuperSU/
other versions not works
Click to expand...
Click to collapse
So just to clarify, I have a 6045I factory global unlocked from Amazon, It has never been rooted, bootloader unlocked, nothing. So would I place on SD and apply update through stock recovery, or is there a different method? Really just want root for adaway and xposed. TWRP would be nice, but not necessary. Just don't want a new paperweight. Thanks!
Can i install twrp to flash thid or stock is fine?
You can try windroid toolkit v3.1.
First u have to unlock bootloader then to flash recovery and supersu .
For me it is not recognising my phone hope u will get success.
If try then pls share ur experience.
yash_rathore25 said:
You can try windroid toolkit v3.1.
First u have to unlock bootloader then to flash recovery and supersu .
For me it is not recognising my phone hope u will get success.
If try then pls share ur experience.
Click to expand...
Click to collapse
I downloaded twice, and twice got security that windroid 3.1 has trojan, and was quarantined!?!
dongarritas said:
I downloaded twice, and twice got security that windroid 3.1 has trojan, and was quarantined!?!
Click to expand...
Click to collapse
For me it got downloaded but showing device either offline or unauthorized
I'd run a full virus /malware scan.... I use 360 Security on mobile devices and PC's. It, along with SUPERAntiSpyware has served me well.
Sent from my LG-H631 using Tapatalk
Just install the TWRP 3.0 in android development (it has instructions in the thread) and then you can flash the supersu mentioned.
famewolf said:
Just install the TWRP 3.0 in android development (it has instructions in the thread) and then you can flash the supersu mentioned.
Click to expand...
Click to collapse
Bro,
They also on locked bootloader with no fastboot commands working like me.
yash_rathore25 said:
Bro,
They also on locked bootloader with no fastboot commands working like me.
Click to expand...
Click to collapse
Well the obvious choices are:
1) Use mobile Q to restore to 5.0.2...unlock bootloader, install twrp....upgrade to marshmallow using the modified update.zip that doesn't wipe recovery and finally root using the file mentioned.
or
2) Live with it as it is until someone figures out how to restore fastboot which will probably still require downgrading.
famewolf said:
Well the obvious choices are:
1) Use mobile Q to restore to 5.0.2...unlock bootloader, install twrp....upgrade to marshmallow using the modified update.zip that doesn't wipe recovery and finally root using the file mentioned.
or
2) Live with it as it is until someone figures out how to restore fastboot which will probably still require downgrading.
Click to expand...
Click to collapse
I am waiting some days otherwise i will downgrade
BTW my device is recognized in fastboot but commands not working. It means fastboot is working but commands have been changed
dongarritas said:
So just to clarify, I have a 6045I factory global unlocked from Amazon, It has never been rooted, bootloader unlocked, nothing. So would I place on SD and apply update through stock recovery, or is there a different method? Really just want root for adaway and xposed. TWRP would be nice, but not necessary. Just don't want a new paperweight. Thanks!
Click to expand...
Click to collapse
The root install it with TWRP !
Alek Dev said:
The root install it with TWRP !
Click to expand...
Click to collapse
That's the problem. This phone is totally stock with nothing done but the update. I literally charged it, turned it on and 20 minutes later 6.0.1 was nagging for install, which I did. There is now the OEM unlock switch in developing options, but I don't know where to start, or flash.
Sent from my LG-H631 using Tapatalk
dongarritas said:
That's the problem. This phone is totally stock with nothing done but the update. I literally charged it, turned it on and 20 minutes later 6.0.1 was nagging for install, which I did. There is now the OEM unlock switch in developing options, but I don't know where to start, or flash.
Sent from my LG-H631 using Tapatalk
Click to expand...
Click to collapse
You must go back to 5.0 to install and then update it because in 6.0.1 update Removes Fastboot commands so you can't install it twrp....
I have a problem with rooting 6039Y on rom 6.0.1 by persona78. Stock rom 5.0.2 and root working fine. When i flash via TWRP after the update to MM i get this message:
-Cheking patch status
---Already patched, attempting to find stock backup
---Stock restore failed, attempting ramdisk restore
---Ramdisk restore failed, aborting
This solution - echo SYSTEMLESS=true >> /data/.supersu - not working.
Phone was simlock removed via furiousgold, maybe this is a problem?
Alcatel one touch idol 3 (5.5) 6045Y
i have this model Alcatel one touch idol 3 (5.5) 6045Y
full unlocked with unlocked bootloader and sim free (single sim model) with 6.0.1 from alcatel not updated to 6.0.1 already i got with 6.0.1 from alcatel (i know you will say "but that phone has 5.0 and updated to 6.0.1 trough a phone update online" But it is not updated ,phone came directly from factory and how i can root this device if there is any help.
Still no solution to rooting stock MM 6045I?
Hope this helps someone
I know this thread is dead, but replying so people can find the information easier.
I used this guide to flash twrp then used twrp to root on stock 6045O 6.0.1.
Root checker just says "root is not properly installed", would like to know if upgrading and the rooting from there would be the best choice. Using 6.0.0.1 Marshmellow
oneperson3121 said:
Root checker just says "root is not properly installed", would like to know if upgrading and the rooting from there would be the best choice. Using 6.0.0.1 Marshmellow
Click to expand...
Click to collapse
The more updated the less likely your going to be able to root.. last time I heard of rooting the G3 you needed to downgrade to Kitkat
Sent from my iPhone using Tapatalk
Why KitKat? I hear there are some Nougat things but i've only seen this when google search for "root" methods specifically.
oneperson3121 said:
Why KitKat? I hear there are some Nougat things but i've only seen this when google search for "root" methods specifically.
Click to expand...
Click to collapse
You have to downgrade. There are tutorials out there. I had to go back to 5.0 so I could root it, then install twrp with twrp manager, then install 7.0. There are no shortcuts. Use LG Tool to flash stock firmware. Here is one of the tutorials: https://forum.xda-developers.com/att-lg-g3/general/downgrade-lg-g3-d850-to-kit-kat-t3437524
kenetix said:
You have to downgrade. There are tutorials out there. I had to go back to 5.0 so I could root it, then install twrp with twrp manager, then install 7.0. There are no shortcuts. Use LG Tool to flash stock firmware. Here is one of the tutorials: https://forum.xda-developers.com/att-lg-g3/general/downgrade-lg-g3-d850-to-kit-kat-t3437524
Click to expand...
Click to collapse
Solved my issue of rooting by downgrading to 4.2 in LG Flash Tool without any problems, I guess my only question now is how do I get to 7.1 Nougat without any issues?
oneperson3121 said:
Solved my issue of rooting by downgrading to 4.2 in LG Flash Tool without any problems, I guess my only question now is how do I get to 7.1 Nougat without any issues?
Click to expand...
Click to collapse
I went to RR 7.0. Some you have to bump. But, if you must have twrp, then download the rom, and gapps on your sd card. Go to twrp. Wipe, then install. I have did it and all runs good. Installing twrp is easy. Go to playstore. Get twrp manager and install twrp. Reboot to recovery. Boom.
kenetix said:
I went to RR 7.0. Some you have to bump. But, if you must have twrp, then download the rom, and gapps on your sd card. Go to twrp. Wipe, then install. I have did it and all runs good. Installing twrp is easy. Go to playstore. Get twrp manager and install twrp. Reboot to recovery. Boom.
Click to expand...
Click to collapse
Found myself going to Cloudy 2.5, solved my issue( occasional blue screen every 2 minutes turning on with success but unable to stay on) assuming the board is dead.
kingroot worked on 6.0.
installed twrp with flashify,
installed lineage 15 with twrp,
flashed magisk 14.
wassco said:
kingroot worked on 6.0.
installed twrp with flashify,
installed lineage 15 with twrp,
flashed magisk 14.
Click to expand...
Click to collapse
how did you get kingroot to wotk on 6.0
wishinew said:
how did you get kingroot to wotk on 6.0
Click to expand...
Click to collapse
You don't, kingroot is used on android 4 also known as kitkat, downgrade to that then use it.
After recently bricking my Oneplus 6 by trying to flash the latest TWRP on the latest Android 10 OTA from Oxygen Updater, I found a post from official TWRP explaining how root with a10 will take a while to implement due to changes that Google has made to their partitions.
So I guess for anyone trying this out on their own, be warned. You will probably end up bricking your device like I did and will probably end up having a bad time.
Please correct me if i'm wrong though, peace!
Edit: can confirm fastboot flash boot twrp-3.3.1-11-enchilada-Q-mauronofrio.img from the other popular post is working!
If you already have a working TWRP on OOS 9 you should be fine as long as you flash a working TWRP afterwards. Blu_spark TWRP 9.101 is compatible (please not 9.101 no earlier version will work).
Also don't use Magisk 20 only 20.1.
There is already a pre-patched version out there. You can fastboot flash it (as fastboot boot doesn't work). An easier way (without a pre-patched version) is currently being worked one as you pointed out already
just updated to a10
boot into twrp, flash new bluspark twrp
flash FULL ota a10 image
reflash twrp
reboot into twrp
boot into system
boot back to twrp
install magisk 20.1
a10, twrp and root working
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
nightfury04 said:
Hi,
I am on 9.0.9 stable with root using magisk. Is it possible to update to android 10 without loosing data and root??
Click to expand...
Click to collapse
havent lost data and you can root again
Blu_spark twrp
could you please provide link for blu_spark twrp img, zip files that work with android 10?
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
nightfury04 said:
Did you uninstall Magisk in stable 9.0.9 before updating to andeoid 10?
Click to expand...
Click to collapse
nope
akri1337 said:
havent lost data and you can root again
Click to expand...
Click to collapse
akri1337 said:
nope
Click to expand...
Click to collapse
It would be of great help if you could provide link to working TWRP with android 10.
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
akri1337 said:
https://forum.xda-developers.com/oneplus-6/development/kernel-t3800965/page222
i used this one
Click to expand...
Click to collapse
Which build did u use mate? R108 is not working with android 9, I tried flashing it using my older installed twrp.
It says unsupported android version. And in github r108 says only for android 10.
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
akri1337 said:
r108 is the kernel not twrp
https://github.com/engstk/android_device_oneplus_enchilada/releases/tag/v9.107
Click to expand...
Click to collapse
Thanks again mate.. I will give this one a try.
there is a problem with Magisk 20.1, after all flashes the system is booting ok with Magisk working but after I give first program root access and rebooting its stuck on bootloader and not booting to system.
nightfury04 said:
Thanks again mate.. I will give this one a try.
Click to expand...
Click to collapse
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
nightfury04 said:
I can confirm that this is working for me. I successfully upgraded from Android 9, Oxygen OS 9.0.9 to Android 10, Oxygen OS 10. Steps that I followed :
1) Flashed new twrp from link in the above post by akri1337 using my previously installed twrp : bluspark 9.85.
2) Flashed Oxygen OS 10 full update and added to queue latest bluspark twrp which I flashed in step one as it would be overwritten by flashing the full OTA update.
3) Rebooted into recovery again to switch to active slot.
4) Flashed Magisk 20.2 to regain root.
This process successfully upgraded my Oneplus 6 without any data loss.
Please note that I disabled all magisk modules just to be safe before starting the upgrade process but didn't uninstall magisk. I was on Magisk 20.2 earlier.
Hope this helps everyone.
Click to expand...
Click to collapse
Which magisk? Ver 20.1 ?
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
GunFishin said:
Why is it that I get an error when trying to flash the full OTA update using TWRP? Something about error 7 and not have a digest file. Is there a full OTA update file that everyone is using? I tried the signed full zip from here on XDA and the one from Oxygen Updater. I get the same error with both.
Click to expand...
Click to collapse
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
chetbiz said:
Had this error too and couldn't flash it with twrp, flashed successfully OTA file from oxygen -> Local upgrade
Click to expand...
Click to collapse
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
GunFishin said:
Still confused as to how everyone else can flash these zip files through TWRP and I cannot.
I'm currently Magisk rooted and have TWRP installed. Will I lose root and TWRP when updating through the local upgrade method?
Click to expand...
Click to collapse
Yes, you will need to flash twrp with adb and going through the hole process of installing twrp and magisk, but for me its not worked well, after first boot to Android Q with magisk 20.1 and granting some apps root access when I rebooted the phone its not booting to system and going to bootloader, I think its related to some problem with magisk 20.1.
Since kernel releases are yet to be published " a total duck move by xiaomi ?" I wanted to keep on using the stock ROM without changing anything but miui is too cringy for me to live with it, so I need to put the ol'rooting hat once again
My question is.. did any one actually root it using magisk and can still get ota , or you would need to uninstall magisk then update then get magisk again?
Also what happens to TWRP , can it coexist with miui ?
I had a previous xiaomi phone (mido) but tbh I never even thought of using the miui and switched to RR once I unlocked the bootloader ?
You can get ota with magisk but updating will rewrite boot and recovery so you'll need to re-root.
mr-mero said:
My question is.. did any one actually root it using magisk and can still get ota , or you would need to uninstall magisk then update then get magisk again?
Also what happens to TWRP , can it coexist with miui ?
Click to expand...
Click to collapse
FYI, I'm still on stock EU v12.0.3.0 with mauronofrio TWRP and rooted with Magisk.
I got two OTAs already, the last with v12.0.4.0 -- and it even tried to apply one of them while I wasn't looking but it obviously failed, since there's no stock recovery.
pnin said:
FYI, I'm still on stock EU v12.0.3.0 with mauronofrio TWRP and rooted with Magisk.
I got two OTAs already, the last with v12.0.4.0 -- and it even tried to apply one of them while I wasn't looking but it obviously failed, since there's no stock recovery.
Click to expand...
Click to collapse
What if I reflash the stock recovery.img after rooting, that might get the ota working ?
Yes I know I would still have to flash twrp and magisk again after it
I'll test it on my old phone first , hope it can work as a reference for one last time of it's miserable life
mr-mero said:
What if I reflash the stock recovery.img after rooting, that might get the ota working ?
Click to expand...
Click to collapse
I thought the same, but then I'm not keen on moving to v12.0.4.0 right now, so I didn't budge. Let us know how it goes. :good:
.
How to install magisk on stock miui global after bootloader unlock?
@coolboy744:
In case you haven't already, you'll have to install a custom recovery first...
.
pnin said:
@coolboy744:
In case you haven't already, you'll have to install a custom recovery first...
.
Click to expand...
Click to collapse
yes i know that. using since 2015 TWRp. but i heard there is system wipe issue on poco twrp. if you installed it confirm
No issue here, just flashed it through TWRP as usual.
.
what about installing magisk from orangefox? What are the steps?
abubin said:
what about installing magisk from orangefox? What are the steps?
Click to expand...
Click to collapse
Still the same, just flash the root file and reboot it up... And also install magisk manager to have root management
Orange Fox is much more recommended for our Poco by ManoloRey for installing AOSP ROMS...
yan2xme said:
Still the same, just flash the root file and reboot it up... And also install magisk manager to have root management
Orange Fox is much more recommended for our Poco by ManoloRey for installing AOSP ROMS...
Click to expand...
Click to collapse
thanks! done it and it is working now.