Database Info

Root? Kingroot?

What's going on with kingroot for Xperia z3 lolipop 5.1.1? There is a date for available kingroot for this version?

No there isn't. Kingroot only supports 5.0 not 5.1 You could always flash 5.0.2, root with kingroot then flash a pre-rooted 5.1.1

heywheelie said:
No there isn't. Kingroot only supports 5.0 not 5.1 You could always flash 5.0.2, root with kingroot then flash a pre-rooted 5.1.1
Click to expand...
Click to collapse
I did it but when I updated to 5.1.1 the Root was deleted

DANIELTZ19 said:
What's going on with kingroot for Xperia z3 lolipop 5.1.1? There is a date for available kingroot for this version?
Click to expand...
Click to collapse
No date available...
I'm waiting for it too :crying:

DANIELTZ19 said:
I did it but when I updated to 5.1.1 the Root was deleted
Click to expand...
Click to collapse
Did you flash a stock 5.0.2, then root with kingroot, install the latest dual recovery from PC, boot to recovery, do a complete wipe then flash a pre-rooted 5.1.1 from recovery. It should work. I tried it here, worked perfectly.
BTW make sure you put the pre-rooted 5.1.1 on your sdcard before you start so once you go into recovery to do a full wipe you don't reboot until you flash the pre-rooted 5.1..1

heywheelie said:
Did you flash a stock 5.0.2, then root with kingroot, install the latest dual recovery from PC, boot to recovery, do a complete wipe then flash a pre-rooted 5.1.1 from recovery. It should work. I tried it here, worked perfectly.
BTW make sure you put the pre-rooted 5.1.1 on your sdcard before you start so once you go into recovery to do a full wipe you don't reboot until you flash the pre-rooted 5.1..1
Click to expand...
Click to collapse
I don't install pre-rooted 5.1.1 because it needs to Recovery .. and I don't want to do a recovery in my device .... i just Burning a normal version of 5.1.1

DANIELTZ19 said:
I don't install pre-rooted 5.1.1 because it needs to Recovery .. and I don't want to do a recovery in my device .... i just Burning a normal version of 5.1.1
Click to expand...
Click to collapse
Then just delete the recovery after you have flashed the pre rooted 5.1.1. The ramdisks are in the system partition.

gregbradley said:
Then just delete the recovery after you have flashed the pre rooted 5.1.1. The ramdisks are in the system partition.
Click to expand...
Click to collapse
If I do now Recovery then it deletes all my stuff in the cell phone .. other than that it will lose my warranty and it might make my cell phone issues

DANIELTZ19 said:
If I do now Recovery then it deletes all my stuff in the cell phone
Click to expand...
Click to collapse
It should not do that if you do it properly. You only lose stuff in your phone if you unlock the bootloader and you do not need to do that. Also, making a backup of things you want to keep is always a good idea.
DANIELTZ19 said:
.. other than that it will lose my warranty and it might make my cell phone issues
Click to expand...
Click to collapse
No you will not lose warranty if you follow the locked bootloader tutorial. You do not need to unlock the bootloader to install recovery and flash a pre-rooted 5.1.1
Please take a moment to look through any of the multiple guides in the general section to see how to do this

gregbradley said:
It should not do that if you do it properly. You only lose stuff in your phone if you unlock the bootloader and you do not need to do that. Also, making a backup of things you want to keep is always a good idea.
No you will not lose warranty if you follow the locked bootloader tutorial. You do not need to unlock the bootloader to install recovery and flash a pre-rooted 5.1.1
Please take a moment to look through any of the multiple guides in the general section to see how to do this
Click to expand...
Click to collapse
Okay, thank you very much, but there will be no hacking with "Kingroot"? This is the most easy and simple ..

DANIELTZ19 said:
Okay, thank you very much, but there will be no hacking with "Kingroot"? This is the most easy and simple ..
Click to expand...
Click to collapse
Kingroot will send your IMEI to an IP address in china, I do not recommend it. Downgrade and use giefroot, install dual recovery, flash a pre rooted 5.1.1, then delete the recovery if you want, but I do not see why you would do this.

gregbradley said:
Kingroot will send your IMEI to an IP address in china, I do not recommend it. Downgrade and use giefroot, install dual recovery, flash a pre rooted 5.1.1, then delete the recovery if you want, but I do not see why you would do this.
Click to expand...
Click to collapse
Because that everyone I know who did Recovery then it's destroyed a lot of things on the device ..

DANIELTZ19 said:
Because that everyone I know who did Recovery then it's destroyed a lot of things on the device ..
Click to expand...
Click to collapse
You are confusing recovery with losing drm keys when unlocking the bootloader.
I have never come across anyone who has recovery installed correctly and used correctly who has had problems like that

@DANIELTZ19
If you're worried and want another opinion then my advice is that everything GregBradley has stated is correct. His method is also the safest and reliable with an excellent tutorial in the General forum. Read it http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
cheers

Is there a way to root on 5.1.1 23.4.A.1.200 ?

Hello there,
have been trying to root my new xperia z3 for 3 weekends now with no luck.
My bootloader has been unlocked through sony website, then relocked and unlocked many times using flashtool.
Looks like all the recoveries (doomlord, twrp) I could find work only on 4.4.4. Then I use flashtool to flash lollipop 5.1.1 23.4.A.1.200 and either wipe and loose the root or don't wipe all and enter a bootloop.
Flashing those recovery kernels straight on lollipop make the phone enter bootloop.
Are you guys able to root those Z3 under 5.1.1 ?
thank you

Sure shot easy way is flash kitkat firmware and use giefroot or flash 5.0 firmware and use kingroot.

Mate, you have to flash a prerooted version of 5.1.1 you can't just flash a stock rom and expect to stay rooted.
Downgrade to Kitkat then root and install a custom recovery. Then you download 5.1.1, Super Su and a custom recovery, create a pre rooted flashable zip with PRFcreator . Then flash it in your custom recovery and you're done. Rooted 5.1.1 with a custom recovery ready to rock.

Kingroot isn't recommendable, your IMEI is sent to China. Downgrade to 4.4, root with giefieroot, upgrade with pre-rooted ROM.
Btw: did you make a backup of your TA partition before unlocking bootloader?

Thanks a lot for your answer guys.
Am unusually struggling with this device.
lol1rfs said:
Mate, you have to flash a prerooted version of 5.1.1 you can't just flash a stock rom and expect to stay rooted.
Downgrade to Kitkat then root and install a custom recovery. Then you download 5.1.1, Super Su and a custom recovery, create a pre rooted flashable zip with PRFcreator . Then flash it in your custom recovery and you're done. Rooted 5.1.1 with a custom recovery ready to rock.
Click to expand...
Click to collapse
Have already downgraded to kitkat, installed custom recovery and rooted. But the 5.1.1 stock flash indeed wipe everything.
Haven't found yet a custom recovery for 5.1.1 that doesn't make the phone enter a bootloop. Would you happen to have a link ?
I'll give a look to that PRFcreator, didn't know about it.
Jkay7 said:
Kingroot isn't recommendable, your IMEI is sent to China. Downgrade to 4.4, root with giefieroot, upgrade with pre-rooted ROM.
Btw: did you make a backup of your TA partition before unlocking bootloader?
Click to expand...
Click to collapse
This is what I read about kingroot and haven't found any other way to root a 5.1.1 stock.
Where could I find a pre-rooter ROM then ? My wish was to be stock and rooted to be able to use apps like titanium backup and adblockers. Used to try custom roms every other day on my old SGS but today I'd be happy with something that just works.
Did not make any backup before unlocking but looked like flashtool was able to relock the device. Am I right guessing I didn't loose my DRM keys then ?
Thanks again for your answers.
Edit: looks like am missing sthg, what's the point in rooting a kitkat to upgrade with a pre-rooted lollipop right after ?

After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056

I hope you made a TA backup before unlocking your bootloader, otherwise you have lost your DRM keys forever.
Anyway, if your bootloader is now locked, follow the guide that Licaon_Kter linked in the above post.
The exploit that lets us root our Z3 only works on Kitkat, so downgrade first, run the exploit to obtain root, and install recovery.
You will then have stock, rooted, KitKat.
To get to 5.1.1, you will then need to either create your own pre rooted firmware, or download one that someone has kindly posted on here.
If you want to learn how to do it, read this --> Create your own pre rooted firmware with PRF Creator
PRF Creator will create a zip file that can be flashed from recovery, so once you have recovery installed, it's dead easy.
That will get you where you want to be.
However . . . and there's always a however lol . . .
. . . if you still have an unlocked bootloader, it is much simpler from wherever you are.
Find any custom rom that has recovery built in, and almost all do, then fastboot the kernel only, the boot.img.
Reboot your device and enter recovery.
Install your pre rooted firmware that you have either created with PRF Creator, or downloaded from here.
Job done.
My personal advice is read, read, and then read some more.
It can be very complicated, but you'll get the hang of it.

Licaon_Kter said:
After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
I still have an unlocked bootloader since flashtool can lock and unlock it in a matter of a second.
Went back again in KK rooted with twrp recovery.
Wiped data, cache, dalvik.
Flashed D6603_23.4.A.1.232_Customized_US_SuperSU_XZDR2.8.2 1 from the link above and ... CWM recovery report install from sdcard completed after 1s and nothing more. Am still booting in KK after that.
This didn't work for me. Am losing it now with this phone.
Am I missing sthg ? Any advice ?
Can't use PRFCreator, am under mac os...
Thanks to all for your help

Try with TWRP too

Licaon_Kter said:
After KitKat root you get a Lollipop pre-rooted image and flash it: http://forum.xda-developers.com/z3/general/d6603-5-0-2-flashable-stock-23-1-0-690-t3056361
Here are the steps: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
Licaon_Kter said:
Try with TWRP too
Click to expand...
Click to collapse
tried twrp found there http://forum.xda-developers.com/z3/development/recovery-z3-twrp-2-8-4-0-t3028846
phone is not booting anymore.
twrp post says it doesn't work on stock room.
---------- Post added at 02:16 PM ---------- Previous post was at 02:05 PM ----------
Is there really anyone out there with a rooted stock lollipop ?
or you are all using customs ?
am seriously questionning the thing now

Why would you NOT follow the steps?
GO AGAIN from the start: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056

Licaon_Kter said:
Why would you NOT follow the steps?
GO AGAIN from the start: http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
Click to expand...
Click to collapse
I just can't, I don't have access to a window machine

Both giefroot and FlashTool are for Win/Mac/Linux.

Licaon_Kter said:
Both giefroot and FlashTool are for Win/Mac/Linux.
Click to expand...
Click to collapse
I appreciate your still trying to help me.
I do use flashtool and am able to root a Kitkat 23.0.A.2.93, so I don't see the point in using giefroot unless it could root a lollipop.
I have read thoroughly and downloaded pre-rooted lollipop stock roms from the link you provided.
Once under KK, rooted, with all settings set properly (debug, security, etc...), and all caches/dalvik/data wiped, the CMW recovery just don't flash those lollipop roms. After just one sec, it says install completed but then the device still boot under KK.
TWRP doesn't even intall, so am wondering if this is even possible to get a TWRP on stock rom.
Have tried all of those with bootloader unlocked and locked, or a mix like unlocked first to be able to root a KK, then relock to flash a stock prerooted 5.1.1 (as stated in the post) but then I get a device that doesn't even boot.
Tried dualrecovery too, flash the zip, and nothing.
I suspect all of you guys have used some sort of .bat windows utility to get through this.
Once again, thanks for your help and patience.

ikho said:
I do use flashtool and am able to root a Kitkat 23.0.A.2.93, so I don't see the point in using giefroot unless it could root a lollipop.
Click to expand...
Click to collapse
The point is to go from the BEGINing _again_: Flash stock KK, giefroot, XZ, pre-rooted LP
I have done it in Linux w/ locked bootloader and stock ROM, hence my pointers.
XZDualrecovery has TWRP 2.8.7.0. But, do take note that you use Volume Down to enter PhilzTouch Recovery and Volume Up to enter TWRP.

Licaon_Kter said:
Both giefroot and FlashTool are for Win/Mac/Linux.
Click to expand...
Click to collapse
am sorry, can't find how to use giefroot on a mac.
read quite a few post of people saying that was not working for them.

Run the INSTALL.SH file in a console (just like they instruct you for the .BAT file for Windows), it detects OS and runs either adb for Linux or for Mac.
Well, like I said, it worked fine in Linux, I guess it should work on Mac, providing the device is detected ok beforehand and such. ( what does "adb devices" outputs with the phone connected ? )

Licaon_Kter said:
Run the INSTALL.SH file in a console (just like they instruct you for the .BAT file for Windows), it detects OS and runs either adb for Linux or for Mac.
Well, like I said, it worked fine in Linux, I guess it should work on Mac, providing the device is detected ok beforehand and such. ( what does "adb devices" outputs with the phone connected ? )
Click to expand...
Click to collapse
yaaay, houray it finally worked
big thanks man, you saved me $500 on that one !

Shutting down Repeatedly When trying to Update Marshmallow

Hi All,
I have Moto X play running on android 5.1.1 lollipop. It was rooted recently and used with cyanogen Mod 12.1 for a month. during that time i did back up of entire phone. later i restored that and at present i have been using stock Rom. Recently i got official update for Android marshmallow and i downloaded the 500+Mb file and tried to install. In that process it was going to Twrp recovery mode and not installing properly. So i did reboot system. After 5 mins i turned on mobile, it got shutdown and i again restored my backup . It was working fine. cant we update to Marshmallow with the rooted device? If so how to stop the notifications of android system updates? I tried this way but still i am getting update notification
Apps--> All---> Motorola Update services--> turned off the notification
.How to disable it so that i should not receive update notification? or any other process to upgrade to marshmallow even after rooting? Please let me know

Mkrishna89 said:
Hi All,
I have Moto X play running on android 5.1.1 lollipop. It was rooted recently and used with cyanogen Mod 12.1 for a month. during that time i did back up of entire phone. later i restored that and at present i have been using stock Rom. Recently i got official update for Android marshmallow and i downloaded the 500+Mb file and tried to install. In that process it was going to Twrp recovery mode and not installing properly. So i did reboot system. After 5 mins i turned on mobile, it got shutdown and i again restored my backup . It was working fine. cant we update to Marshmallow with the rooted device? If so how to stop the notifications of android system updates? I tried this way but still i am getting update notification
Apps--> All---> Motorola Update services--> turned off the notification
.How to disable it so that i should not receive update notification? or any other process to upgrade to marshmallow even after rooting? Please let me know
Click to expand...
Click to collapse
you need stock recovery to update to OTA mm, you cannot update from TWRP. download the lollipop stock-firmware extract the recovery file and flash it, then update.
i wanted to ask that after restoring from backup you got OTA update notification ? or you downloaded the MM update from other sources?? because i thought after rooting i wont get official OTA.

Mkrishna89 said:
Hi All,
I have Moto X play running on android 5.1.1 lollipop. It was rooted recently and used with cyanogen Mod 12.1 for a month. during that time i did back up of entire phone. later i restored that and at present i have been using stock Rom. Recently i got official update for Android marshmallow and i downloaded the 500+Mb file and tried to install. In that process it was going to Twrp recovery mode and not installing properly. So i did reboot system. After 5 mins i turned on mobile, it got shutdown and i again restored my backup . It was working fine. cant we update to Marshmallow with the rooted device? If so how to stop the notifications of android system updates? I tried this way but still i am getting update notification
Apps--> All---> Motorola Update services--> turned off the notification
.How to disable it so that i should not receive update notification? or any other process to upgrade to marshmallow even after rooting? Please let me know
Click to expand...
Click to collapse
if you have your backup just do a full flash on stock rom and start fresh. there's an Asian 6.0 rom (I believe it is Indian) on the x play github. then proceed with root again.

bablu048 said:
you need stock recovery to update to OTA mm, you cannot update from TWRP. download the lollipop stock-firmware extract the recovery file and flash it, then update.
i wanted to ask that after restoring from backup you got OTA update notification ? or you downloaded the MM update from other sources?? because i thought after rooting i wont get official OTA.
Click to expand...
Click to collapse
Actually i am not android developer or android related person. After i heard many things about rooting the devices. I just give it a try by watching the video in you tube. So i am not aware of the core technical terms you specified.
First rooted the mobile. before installing the cyanogen Mod 12.1, i took back up in TWRP recovery mode. i used that same backup to restore after my device got shutdown. Yes even after rooting i got the Update notification

pijes said:
if you have your backup just do a full flash on stock rom and start fresh. there's an Asian 6.0 rom (I believe it is Indian) on the x play github. then proceed with root again.
Click to expand...
Click to collapse
I did not understand core android technical terms as i am not android guy. You mean to say unroot the device and perform root again?

bablu048 said:
you need stock recovery to update to OTA mm, you cannot update from TWRP. download the lollipop stock-firmware extract the recovery file and flash it, then update.
i wanted to ask that after restoring from backup you got OTA update notification ? or you downloaded the MM update from other sources?? because i thought after rooting i wont get official OTA.
Click to expand...
Click to collapse
Sir, if you have time please browse through Youtube and search for the name "dhananjay bhosale". In his playlists, there will be a moto x play playlist.in the you can find how to root moto........, by this way i rooted my mobile. i dont have any knowledge in android. I just Followed that Video. i could not able to post the link here as i am a new member

Mkrishna89 said:
Actually i am not android developer or android related person. After i heard many things about rooting the devices. I just give it a try by watching the video in you tube. So i am not aware of the core technical terms you specified.
First rooted the mobile. before installing the cyanogen Mod 12.1, i took back up in TWRP recovery mode. i used that same backup to restore after my device got shutdown. Yes even after rooting i got the Update notification
Click to expand...
Click to collapse
i think if you can block/disable notifications for Google Play Services, it'll remove the update notification.
settings>>apps>>google play services>>disable all notifications

bablu048 said:
i think if you can block/disable notifications for Google Play Services, it'll remove the update notification.
settings>>apps>>google play services>>disable all notifications
Click to expand...
Click to collapse
Sir, Is it possible to unroot the rooted devices in any way? if so could you please let me know

if you want to unroot you can do it from superuser, its mentioned in the youtube video. just unroot from superuser settings.
then if you want to upgrade to marshmallow download Indian stock lollipop rom from https://github.com/motoxplay/stock. unzip it on your computer to the the folder where you kept TWRP while flashing it . you'll see a file named recovery.img.
from adb run the command
Code:
fastboot flash recovery recovery.img
i.e flash this recovery just the way you flashed TWRP.
then you can update to marshmallow.
and did disabling google play services removed your update notification???

Mkrishna89 said:
Sir, Is it possible to unroot the rooted devices in any way? if so could you please let me know
Click to expand...
Click to collapse
You just have to download the twrp flashable 6.0 zip file and restore it through twrp. No extra things.
Sent from my XT1562 using Tapatalk

bablu048 said:
if you want to unroot you can do it from superuser, its mentioned in the youtube video. just unroot from superuser settings.
then if you want to upgrade to marshmallow download Indian stock lollipop rom from https://github.com/motoxplay/stock. unzip it on your computer to the the folder where you kept TWRP while flashing it . you'll see a file named recovery.img.
from adb run the command
Code:
fastboot flash recovery recovery.img
i.e flash this recovery just the way you flashed TWRP.
then you can update to marshmallow.
and did disabling google play services removed your update notification???
Click to expand...
Click to collapse
I diabaled. But at present i dont have internet connection to my mobile and i will let you know once i got any notification again about the update.
So as you said can i proceed that above steps with my rooted mobile? i mean flashing the unzip file like i did before? wont be any problem? or i have to unroot and root again after flashing the recovery.img??

Mkrishna89 said:
I diabaled. But at present i dont have internet connection to my mobile and i will let you know once i got any notification again about the update.
So as you said can i proceed that above steps with my rooted mobile? i mean flashing the unzip file like i did before? wont be any problem? or i have to unroot and root again after flashing the recovery.img??
Click to expand...
Click to collapse
Does your phone have twrp flashed or not?
Sent from my XT1562 using Tapatalk

K.khiladi said:
Does your phone have twrp flashed or not?
Sent from my XT1562 using Tapatalk
Click to expand...
Click to collapse
Yes Twrp flashed and successfully rooted

Mkrishna89 said:
Yes Twrp flashed and successfully rooted
Click to expand...
Click to collapse
Then please download the twrp flashable 6.0 zip and restore it through twrp.
Wait I will provide you the link of the thread.
Read the first post of that thread carefully.
Edit - here is the link, go to the thread, download the Indian one and follow the procedure
http://forum.xda-developers.com/showthread.php?t=3272979
[ROM] 6.0 TWRP Flashable Stock - Brazil / India / Canada versions
Sent from my XT1562 using Tapatalk

Mkrishna89 said:
I diabaled. But at present i dont have internet connection to my mobile and i will let you know once i got any notification again about the update.
So as you said can i proceed that above steps with my rooted mobile? i mean flashing the unzip file like i did before? wont be any problem? or i have to unroot and root again after flashing the recovery.img??
Click to expand...
Click to collapse
Edit: do as the post above this mentions.[i didn't know about that thread but it'll also work]
or
nope no problem just flash the recovery. but before doing anything take a backup on your external sdcard twrp>>backup[look at bottom to change where to store the backup select sd card] for security if in case anything goes wrong, you can flash twrp again and restore.
and remember to select 'ALLOW OEM UNLOCK' and usb debugging options from settings>>developer options

K.khiladi said:
Then please download the twrp flashable 6.0 zip and restore it through twrp.
Wait I will provide you the link of the thread.
Read the first post of that thread carefully.
Edit - here is the link, go to the thread, download the Indian one and follow the procedure
http://forum.xda-developers.com/showthread.php?t=3272979
[ROM] 6.0 TWRP Flashable Stock - Brazil / India / Canada versions
Sent from my XT1562 using Tapatalk
Click to expand...
Click to collapse
Ya i got the thread. Before i proceed i want you let you know how i rooted my mobile. please check this link and let me know whether if i do in the way specified in the thread will works for me?
https://www.youtube.com/watch?v=PzQyg9t9j6U&index=3&list=PL3yX1-A8wnSmKqZGL55-7EYPFRol3zuIA

Mkrishna89 said:
Ya i got the thread. Before i proceed i want you let you know how i rooted my mobile. please check this link and let me know whether if i do in the way specified in the thread will works for me?
https://www.youtube.com/watch?v=PzQyg9t9j6U&index=3&list=PL3yX1-A8wnSmKqZGL55-7EYPFRol3zuIA
Click to expand...
Click to collapse
Just follow the procedure as given in that thread and everything will be fine.
It has nothing to do with the way you rooted your phone.
If a phone has twrp installed, he has nothing to fear about upgrading to latest versions as the updates are made available on Xda in Twrp flashable zip.
So no need to format the stock firmware again and then update and then all the headache.
Sent from my XT1562 using Tapatalk

bablu048 said:
Edit: do as the post above this mentions.[i didn't know about that thread but it'll also work]
or
nope no problem just flash the recovery. but before doing anything take a backup on your external sdcard twrp>>backup[look at bottom to change where to store the backup select sd card] for security if in case anything goes wrong, you can flash twrp again and restore.
and remember to select 'ALLOW OEM UNLOCK' and usb debugging options from settings>>developer options
Click to expand...
Click to collapse
Sir, In your previous post you meant to say this?
1. First unroot the mobile using the super Su (settings)
2. Then flash the Stock lollipop rom mentioned in the github
3. Then update the mobile to Marshmallow
4. Then again root the device
You meant to say this?

Mkrishna89 said:
Sir, In your previous post you meant to say this?
1. First unroot the mobile using the super Su (settings)
2. Then flash the Stock lollipop rom mentioned in the github
3. Then update the mobile to Marshmallow
4. Then again root the device
You meant to say this?
Click to expand...
Click to collapse
1. correct
1.1. check oem unlock and usb debugging
1.2. Copy the original old backup which you took, to your external sdcard. [just to return to stock if anything goes wrong]
2. Just flash the recovery which is present in the lollipop rom, no need to flash the whole rom.
3. correct
4. Do NOT flash the old superuser to root. To root again follow these steps http://forum.xda-developers.com/moto-x-play/general/root-how-to-root-6-0-easly-t3277202
that other post was much easier

bablu048 said:
Edit: do as the post above this mentions.[i didn't know about that thread but it'll also work]
or
nope no problem just flash the recovery. but before doing anything take a backup on your external sdcard twrp>>backup[look at bottom to change where to store the backup select sd card] for security if in case anything goes wrong, you can flash twrp again and restore.
and remember to select 'ALLOW OEM UNLOCK' and usb debugging options from settings>>developer options
Click to expand...
Click to collapse
Hi Sir, I followed the other method. downloaded the twrp 6.0 zip from the thread. extracted to sdcard/twrp/backups.
wiped the data, restored that. after that i flashed the Super Su and reboot system. but it was stuck at motorola logo. in that description this will happen if we choose install super su. But i didnt do that.but still stuck at motorola logo.
so again i tried and now with out flashed Super su and downloaded super Su from google play,. getting error binaries cannot be updated. please help me

Update 6.0 mm full tmo & skinny debloated version

6.0 Marshmallow with insecure modded kernel and TWRP recovery​
This needs testing by someone else. It has been flashed on my own personal phone with no issues.
Requirements- Unlocked bootloader, Draken FX's Bootstack -the fixed version by Turbo2012 found in DrakenFX's thread for the flashable 6.0 update. Must be currently on an LG based ROM NOT CM. After install flash SuperSU install zip, post any issues. You will be able to ADB and Fastboot even if you can only boot splash screen with this kernel so you should be able to recover from almost anything multiple ways. When time allows I will put up a source built 6.0 along the lines of Game Theory's Katana ROM. Everybody is welcome to everything I post and I strongly encourage the young crowd to get involved, these phones don't support their selves.
Downloads:
Tested SuperSU
Working Bootstack for 6.0 MM
Update.zip
Instructions:
Flash Bootstack
Flash Update
Flash Beta SuperSU from link
New debloated version with insecure kernel and init.d support, rooted with Chainfire's Beta 2.71 SuperSU credit to SuperR for the help with the updater perms.
FIXED DOWNLOAD ALL APOLOGIES
Skinny Stylo Alpha version
Credits:
DrakenFX for his flashable zips and kdz files
Turbo2012 fixing and contributing
Chainfire for his SuperSU and he's been here since it started

Saved

Requirements- Unlocked bootloader
Click to expand...
Click to collapse
Does that mean a fastboot oem unlock, or the OEM unlock in the developers tools. If you mean fastboot oem unlock, is that available once you flash stock MM, since it is not in LP?
PS - thank you very much for taking the time to pick this up. Back in the days of the Galaxy S1, I had a build environment setup, and a lot more knowledge (it is amazing that if you don't use it, you lose it), but I have a son now, so I don't have the time to invest in all the hobbies that I want anymore. I will definitely be a guinea pig for you. I am not actually aware of a way to brick the Metro or TMO versions of this phone since we have a kdz -- it is not possible to blow up firmware download mode.

runningnak3d said:
Does that mean a fastboot oem unlock, or the OEM unlock in the developers tools. If you mean fastboot oem unlock, is that available once you flash stock MM, since it is not in LP?
PS - thank you very much for taking the time to pick this up. Back in the days of the Galaxy S1, I had a build environment setup, and a lot more knowledge (it is amazing that if you don't use it, you lose it), but I have a son now, so I don't have the time to invest in all the hobbies that I want anymore. I will definitely be a guinea pig for you. I am not actually aware of a way to brick the Metro or TMO versions of this phone since we have a kdz -- it is not possible to blow up firmware download mode.
Click to expand...
Click to collapse
@runningnak3d
I would prefer to be bootloader unlocked through fastboot oem unlock before doing any mods in 6.0. Every single time I did not I got secure boot error. If you make any system change on 6.0 with locked boot it will not boot.

Thank you for taking the time to do this.
:good::good:

So it's still not possible to update from Lollipop to rooted Marshmallow without unlocking the bootloader via fastboot? A secure boot error might as well be a brick to me. Oh well.

Revenant Ghost said:
So it's still not possible to update from Lollipop to rooted Marshmallow without unlocking the bootloader via fastboot? A secure boot error might as well be a brick to me. Oh well.
Click to expand...
Click to collapse
The main reason I made this was because I can never boot recovery or fastboot manually ( ex. w/hardware buttons) when you have the insecure kernel adb works when at the splash screen so it's easier to recover if you have any problems.
Sent from my LG-H631 using XDA-Developers mobile app

Revenant Ghost said:
So it's still not possible to update from Lollipop to rooted Marshmallow without unlocking the bootloader via fastboot? A secure boot error might as well be a brick to me. Oh well.
Click to expand...
Click to collapse
If you used Draken's guide to root and install TWRP on lollipop, your bootloader will be unlocked.

wrenchman76 said:
If you used Draken's guide to root and install TWRP on lollipop, your bootloader will be unlocked.
Click to expand...
Click to collapse
You only need a "soft" unlock (enable oem unlock in developer mode) to root / install TWRP on lolipop -- no PC required. MM however, requires a "hard" OEM unlock, and that requires a PC.

runningnak3d said:
You only need a "soft" unlock (enable oem unlock in developer mode) to root / install TWRP on lolipop -- no PC required. MM however, requires a "hard" OEM unlock, and that requires a PC.
Click to expand...
Click to collapse
I am currently on lollipop rooted and TWRP installed off of Draken's guide. Do I need to do something else to the bootloader before I flash this ROM?

wrenchman76 said:
I am currently on lollipop rooted and TWRP installed off of Draken's guide. Do I need to do something else to the bootloader before I flash this ROM?
Click to expand...
Click to collapse
Yes, you have to unlock your bootloader with fastboot oem unlock. If you flash this without unlocking your bootloader you will get a secure boot error, and you will have to flash a KDZ and start all over.
Lolipop doesn't come with fastboot. So you have to follow Draken's thread to get stock MM on your device. There is NO other way. Once you have stock MM you can unlock your boot loader with fastboot. Once you have an unlocked boot loader -- THEN you can flash this if you want.

Waiting on the debloated version.
Sent from my LGMS631 using Tapatalk

runningnak3d said:
Yes, you have to unlock your bootloader with fastboot oem unlock. If you flash this without unlocking your bootloader you will get a secure boot error, and you will have to flash a KDZ and start all over.
Lolipop doesn't come with fastboot. So you have to follow Draken's thread to get stock MM on your device. There is NO other way. Once you have stock MM you can unlock your boot loader with fastboot. Once you have an unlocked boot loader -- THEN you can flash this if you want.
Click to expand...
Click to collapse
I can vouch for this. That's exactly what happened to me when I tried to flash this without unlocking the bootloader with fastboot. At least I finally managed to ship my device to LG for repairs today. I'll just chalk it up as another lesson learned.

Revenant Ghost said:
I can vouch for this. That's exactly what happened to me when I tried to flash this without unlocking the bootloader with fastboot. At least I finally managed to ship my device to LG for repairs today. I'll just chalk it up as another lesson learned.
Click to expand...
Click to collapse
You didn't need to ship it back to LG. Firmware download mode is always available (hold vol up while plugging in USB cable -- just vol up, not vol up + power). Continue holding vol up until FW DL mode displays). Then just use the LG flash tool to flash a KDZ. It is a PITA when you have to go back that far, but you can't brick these phones, not with software at least -- they would need to be physically altered
-- Brian

Revenant Ghost said:
I can vouch for this. That's exactly what happened to me when I tried to flash this without unlocking the bootloader with fastboot. At least I finally managed to ship my device to LG for repairs today. I'll just chalk it up as another lesson learned.
Click to expand...
Click to collapse
You sent your device in for a soft brick? You should set up the flash tool for our phone with a 10j.kdz before doing anything. Hope you get it back soon.

Debloated version
Fixing some force close problems on a debloated version now, should be up later today or tonight.

@runningnak3d
Flashing the KDZ seems easy enough. But how could I fix it without unrestricted access to a computer? And my stock charger is broken without a USB cable. I had no choice but to send it in for repairs. Guess I'll be stuck on Lollipop for a while longer, at least.

Edubyah said:
6.0 Marshmallow with insecure modded kernel and TWRP recovery​
This needs testing by someone else. It has been flashed on my own personal phone with no issues.
Requirements- Unlocked bootloader, Draken FX's Bootstack -the fixed version by Turbo2012 found in DrakenFX's thread for the flashable 6.0 update. Must be currently on an LG based ROM NOT CM. After install flash SuperSU install zip, post any issues. You will be able to ADB and Fastboot even if you can only boot splash screen with this kernel so you should be able to recover from almost anything multiple ways. When time allows I will put up a source built 6.0 along the lines of Game Theory's Katana ROM. Everybody is welcome to everything I post and I strongly encourage the young crowd to get involved, these phones don't support their selves.
Downloads:
Tested SuperSU
Working Bootstack for 6.0 MM
Update.zip
Instructions:
Flash Bootstack
Flash Update
Flash Beta SuperSU from link
Credits:
DrakenFX for his flashable zips and kdz files
Turbo2012 fixing and contributing
Chainfire for his SuperSU and he's been here since it started
Click to expand...
Click to collapse
Can you post links to DrakenFx post and will this work with CDMA version (ie, Boost Mobile 770 version of hardware)

JBoever said:
Can you post links to DrakenFx post and will this work with CDMA version (ie, Boost Mobile 770 version of hardware)
Click to expand...
Click to collapse
Can the bootloader be unlocked on the CDMA versions (ex. Boost, Sprint, Verizon)? If you can I will make a variant for it. But if you can't NO.
I just found out that the unlocked bootloader in 6.0 survives even the .kdz flashtool. So once you unlock your boot in 6.0 with fastboot oem unlock you never have to do it again even survived kdz downgrade to lollipop and update to 6.0 stayed unlocked.

JBoever said:
Can you post links to DrakenFx post and will this work with CDMA version (ie, Boost Mobile 770 version of hardware)
Click to expand...
Click to collapse
works great on metro ms631 just need wifi to stop turning its self off can you guys fix it! h631/ms631 mm kernel works find no errors help needed fixing wifi connection thanks

SAFE rooting to HUAWEI MATE 9

hi guys ,
I`ve read this thread https://forum.xda-developers.com/mate-9/how-to/guide-how-to-root-mate-9-decrypt-data-t3569986
my ask : Does this rooting goes well with MHA-L29C185B172 ?
if not , then how can i root my device SAFELY ?
thanks all

one, post, no experience with rooting android phones, do NOT root this phone unless there is some important reason to.
do ALOT more reading before you even think about rooting

Thx to reply. Like the others i wanna root to have root apps in my phone ,

Thx . Wanna have apps requires root in my phone . That simple

You don't even need to decrypt if you don't want to.
Unlock Developer Options (Settings - About: tap build number until it says it's enabled)
Go to the Developer Options and enable OEM Unlocking
Unlock bootloader
Flash twrp 3.1.0
Flash SuperSU no-decrypt (https://mega.nz/#!lkV0jbYJ!b1h-5uVksvpt7rw0tRHV7Qxjwk2xkKox0w-iRsCLlbU)
Have fun.
For decryption follow the decrypt guide.
To undo root and relock (Bootloader Locked) flash a stock firmware using the Force flash guide under Guides or use firmware finder).
For Magiskv12 root you need firmware B182+

super!!! , I did unlock the device and flashed twrp ,then tried install SU but failed , that made me afraid of bricking if i did further action

nawraz said:
super!!! , I did unlock the device and flashed twrp ,then tried install SU but failed , that made me afraid of bricking if i did further action
Click to expand...
Click to collapse
Original SuperSU 2.79 won't install. We have no loop support in kernel pre-B182. And even with support it doesn't install. The one I linked is a phh supersu hybrid. It uses phh su's method of installing, but installs SuperSU.

ante0 said:
Original SuperSU 2.79 won't install. We have no loop support in kernel pre-B182. And even with support it doesn't install. The one I linked is a phh supersu hybrid. It uses phh su's method of installing, but installs SuperSU.
Click to expand...
Click to collapse
Hi. I just happen to come across your post and noticed you said that there is no loop support pre-B182. I have the Chinese version with B213. Some apps, like Linux on Android need, unless something has changed, loop support as well as root. Do you have a reference or a link about the loop support on this phone? Thanks!

I failed install su however still waiting for any updates

nawraz said:
I failed install su however still waiting for any updates
Click to expand...
Click to collapse
You flashed the one I linked? And which twrp do you use?

ante0 said:
You don't even need to decrypt if you don't want to.
Unlock bootloader
Flash twrp 3.1.0
Flash SuperSU no-decrypt (https://mega.nz/#!lkV0jbYJ!b1h-5uVksvpt7rw0tRHV7Qxjwk2xkKox0w-iRsCLlbU)
Have fun.
For decryption follow the decrypt guide.
To undo root and relock (Bootloader Locked) flash a stock firmware using the Force flash guide under Guides or use firmware finder).
For Magiskv12 root you need firmware B182+
Click to expand...
Click to collapse
Just would like to say that it's not fair to say him that in case that the second entry said: One post on xda and he wants to root!
I think the problem is the order you gave him @ante0 (MAYBE!)
Unlock bootloader
flash TWRP
And I think he now has a BIG problem bc you DIDN'T said or forced him to go into developer settings and turn on OEM-unlock!
@nawraz did you turned on OEM-unlock in developer settings?
if you boot into fastboot mode are BOTH (bootloader and FRP = unlocked (in red letters), or and I really hoper NOT is FRP lock (in green letters)???
Maybe that is now the problem for him, not being able to flash SuperSU?
If you have luck @nawraz then try to flash TWRP 3.0.2-2 and with that SuperSU2.79
If you have root then you can install latest TWRP (3.1.0-1)
If you can't flash anything... oh oh!

FootSlave said:
Just would like to say that it's not fair to say him that in case that the second entry said: One post on xda and he wants to root!
I think the problem is the order you gave him @ante0 (MAYBE!)
Unlock bootloader
flash TWRP
And I think he now has a BIG problem bc you DIDN'T said or forced him to go into developer settings and turn on OEM-unlock!
@nawraz did you turned on OEM-unlock in developer settings?
if you boot into fastboot mode are BOTH (bootloader and FRP = unlocked (in red letters), or and I really hoper NOT is FRP lock (in green letters)???
Maybe that is now the problem for him, not being able to flash SuperSU?
If you have luck @nawraz then try to flash TWRP 3.0.2-2 and with that SuperSU2.79
If you have root then you can install latest TWRP (3.1.0-1)
If you can't flash anything... oh oh!
Click to expand...
Click to collapse
He already unlocked and flashed twrp.
3.1.0 installs SuperSU fine. 3.0.3 does not.
And if oem was locked he wouldn't even be in twrp as you can't flash anything with fastboot if it is locked.
But I'll update my post in case anyone does miss to unlock oem.

Hope you don't get me wrong!
Just said that bc I had that problem 5 days ago and the only thing that helped was funky!
I had a softbrick and a reboot always kicked me into eRecovery
I just had eRecovery and fastboot!
Bootloader relocked and frp locked!
Stupid me relocked the bootloader bc I read that you then can unlock oem, then unlock bootloader again!
Well, that was a mistake!
Send from Huawei Mate 9 with Tapatalk

FootSlave said:
Hope you don't get me wrong!
Just said that bc I had that problem 5 days ago and the only thing that helped was funky!
I had a softbrick and a reboot always kicked me into eRecovery
I just had eRecovery and fastboot!
Bootloader relocked and frp locked!
Stupid me relocked the bootloader bc I read that you then can unlock oem, then unlock bootloader again!
Well, that was a mistake!
Send from Huawei Mate 9 with Tapatalk
Click to expand...
Click to collapse
Yeah. Only way then would be to rebrand to C636 using the DLOAD method, then rebrand back to your stock version using the Update thread under Guides. The latter requires twrp though so you'd need to rebrand first to get a working system.
To be honest I just figured he had already unlocked and flashed twrp as he was in the decrypt thread
Missing oem was an error on my side. It was long since I had to unlock oem xD

ante0 said:
You flashed the one I linked? And which twrp do you use?
Click to expand...
Click to collapse
hi , i used twrp-3.0.2-2 successfully and failed with superuser-r310

nawraz said:
hi , i used twrp-3.0.2-2 successfully and failed with superuser-r310
Click to expand...
Click to collapse
Weird. I tested with 3.1.0 a few days ago. But I guess it could have to do with builds. 3.1.0 is using kernel for B182. Maybe it's fixed if you use 3.1.0 with B182.
Oh well, good you managed to install it anyway.
Edit: I tested with the SuperSU I linked.

mscion said:
Hi. I just happen to come across your post and noticed you said that there is no loop support pre-B182. I have the Chinese version with B213. Some apps, like Linux on Android need, unless something has changed, loop support as well as root. Do you have a reference or a link about the loop support on this phone? Thanks!
Click to expand...
Click to collapse
All I know is that it wasn't present in builds before B182.
 @st_voss is the one who found out it was added in B182 (Kernel build April. 11th probably as that's what I have on B182.).
It might be present in B181 on C636 as well, that was released 8th of May.

mr. ante0 ..... u r the man , thank you so much

thank you guys i finally rooted my mate 9 safely ,,,,, thanks n credits to ante0

thank you guys i finally rooted my mate 9 safely ,,,,, thanks n credits to ante0