Stuck on ""PLANET MAX" After Partition my HTC MAGIC 32A ECLAIR [MADE BY ME]. HELP!!!!
tomorrow i was flash my HTC MAGIC 32A to rom Eclair 2.1 [Made By Me]...
and it's great....working NORMAL!!!
but an hour ago, i tried to made partition of the SDCard from recovery...
The Proportions are :
96mb and 512mb
after finish the partition, i reboot my handset...
and then, it's STUCK on ""PLANET MAX""...
i don't know why....
i still can opened the RECOVERY and FASTBOOT, it's still working...
what should I do know?
cause I don't Know....
should I wipe my Handset?
it could be a error with apps2sd, try installing that rom again
You did make sure you had the new radio before flashing the rom right?
I have similar difficulties. I have tried all three versions of the ROM and the initial boot loops on Planet Max..
I haven't tried the latest version, but the first version for me worked with radio 08.29 & 10.18...
Dunno if having 07.29 makes a difference
OK. Will try installing a newer Radio..
Guys, it's because of the EXT partition!
Use ONLY EXT2 partition on SDcard!!! Do NOT upgrade the partition to EXT3 or EXT4!!!
Next versions of AME2.1 will have support for EXT3 and EXT4.
just install the rom again...
if u based of someone elses build it could have apps2sd cards scripts etc etc which caused the phone to mess up a bit
just wipe and reflah
bigballa said:
just install the rom again...
if u based of someone elses build it could have apps2sd cards scripts etc etc which caused the phone to mess up a bit
just wipe and reflah
Click to expand...
Click to collapse
LOL... that has nothing to do with the loop of Planet Max logo... and rom not starting! I am a friend of ahmgsk and it told me that it's because his rom only supports EXT2 partitions! That's all! I had the same problem
Users with the boot animation loop error should:
1. Enter recovery and partition SD card. Default settings! DO NOT UPGRADE TO EXT3!!!
2. Wipe factory, dalvik and sdcard.
3. Flash the ROM again.
It will work 100% GUARANTEED!
I wiped and reflashed several times without success. I only have one partition on the SD card..
Edit: Upgraded the Radio, still not working..
Filgaliel said:
I wiped and reflashed several times without success. I only have one partition on the SD card..
Edit: Upgraded the Radio, still not working..
Click to expand...
Click to collapse
Do the steps above and it will work!
Also, make sure you have the radio and spl in my signature below!
thematrix2 said:
LOL... that has nothing to do with the loop of Planet Max logo... and rom not starting! I am a friend of ahmgsk and it told me that it's because his rom only supports EXT2 partitions! That's all! I had the same problem
Users with the boot animation loop error should:
1. Enter recovery and partition SD card. Default settings! DO NOT UPGRADE TO EXT3!!!
2. Wipe factory, dalvik and sdcard.
3. Flash the ROM again.
It will work 100% GUARANTEED!
Click to expand...
Click to collapse
i have already solved my problem...
WIPE the HANDSET,and FORMAT the SDCard....now working NORMALLY..heheheh
ooo...
i should do the partitions before i flash the ROM of Eclair 2.1 [MADE BY ME]...is that true?
can i make the partitions after i Flash my ROM of Eclair 2.1 [MADE BY ME]?
any turorials?hehehe
LoGaY said:
i have already solved my problem...
WIPE the HANDSET,and FORMAT the SDCard....now working NORMALLY..heheheh
ooo...
i should do the partitions before i flash the ROM of Eclair 2.1 [MADE BY ME]...is that true?
can i make the partitions after i Flash my ROM of Eclair 2.1 [MADE BY ME]?
any turorials?hehehe
Click to expand...
Click to collapse
I told you guys it will work
You should do the partitions BEFORE flashing the ROM! ALWAYS
thematrix2 said:
I told you guys it will work
You should do the partitions BEFORE flashing the ROM! ALWAYS
Click to expand...
Click to collapse
I just tried this. Wipe, partition, flash.
I now get past the Planet max logo but it now freezes on black screen..
Filgaliel said:
I just tried this. Wipe, partition, flash.
I now get past the Planet max logo but it now freezes on black screen..
Click to expand...
Click to collapse
owww....
maybe,i'll trying this partitions latter,hee...
until someone success....
hee
Hi people u should hav pm me or -> come on gtalk
i hav never declined any persons request
Anyways -> my rom works only with ext2 patition
so please follow the guide
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Swap + Ext2 + Fat32 (96mb Swap + 512 Mb Ext2 + Remaining fat32 ) (For 8Gb Card)
Step 01: Turn Off Ur Device
Step 02: Press Home Key and Power Key At The Same time
Step 03: Go To 6th Option 'Partition sdcard'
Step 04: Select Partition SD
Step 05: Press Home To Confirm
Step 06: Set Swap Size as per required Using -> Trackball OR Volume Key at Left of your Device
Step 07: Set Ext2-Size as per required Using -> Trackball OR Volume Key at Left of your Device
Step 08: Confirm your Action By using Home Button
Your Memory Card Partition Is Created
Now flash the rom
Step For Installation: -
Step 00: Check The SPL required for ROM.zip matches Your PHONE
Step 01: Turn Off Ur Magic
Step 02: Press HOME + POWER (To Enter Recovery)
Step 03: Go To Option 2 ' USB-MS toggle'
Step 04: Paste the ROM.zip in root of your SD-Card
Step 05: Hit Back Button to Return Back to Recovery Menu
Step 06: Go To Option 5 'Wipe'
Step 07: Preform Wipedata/factory reset
Step 08: Perform Wipe Dalvik-cache (If U don't have Partitions On SD-Card This will Give adb error)
Step 09: Perform Wipe SD:ext partition (If U don't have Partitions On SD-Card This will Give adb error)
Step 10: Hit Back Button to Return Back to Recovery Menu
Step 11: Go To Option 4 'Flash zip from sdcard'
Step 12: Choose The ROM.zip, Hit Home to Flash The Rom
Step 13: Select 1st Option 'Reboot system now'
Now -> u should get it working
for more tutorials -> check here
if not come on gtalk -> [email protected]
ahmgsk said:
Hi people u should hav pm me or -> come on gtalk
i hav never declined any persons request
Anyways -> my rom works only with ext2 patition
so please follow the guide
Swap + Ext2 + Fat32 (96mb Swap + 512 Mb Ext2 + Remaining fat32 ) (For 8Gb Card)
Step 01: Turn Off Ur Device
Step 02: Press Home Key and Power Key At The Same time
Step 03: Go To 6th Option 'Partition sdcard'
Step 04: Select Partition SD
Step 05: Press Home To Confirm
Step 06: Set Swap Size as per required Using -> Trackball OR Volume Key at Left of your Device
Step 07: Set Ext2-Size as per required Using -> Trackball OR Volume Key at Left of your Device
Step 08: Confirm your Action By using Home Button
Your Memory Card Partition Is Created
Now flash the rom
Step For Installation: -
Step 00: Check The SPL required for ROM.zip matches Your PHONE
Step 01: Turn Off Ur Magic
Step 02: Press HOME + POWER (To Enter Recovery)
Step 03: Go To Option 2 ' USB-MS toggle'
Step 04: Paste the ROM.zip in root of your SD-Card
Step 05: Hit Back Button to Return Back to Recovery Menu
Step 06: Go To Option 5 'Wipe'
Step 07: Preform Wipedata/factory reset
Step 08: Perform Wipe Dalvik-cache (If U don't have Partitions On SD-Card This will Give adb error)
Step 09: Perform Wipe SD:ext partition (If U don't have Partitions On SD-Card This will Give adb error)
Step 10: Hit Back Button to Return Back to Recovery Menu
Step 11: Go To Option 4 'Flash zip from sdcard'
Step 12: Choose The ROM.zip, Hit Home to Flash The Rom
Step 13: Select 1st Option 'Reboot system now'
Now -> u should get it working
if not come on gtalk -> [email protected]
Click to expand...
Click to collapse
Hi @ahmgsk, i'm using ur ROM and no have ext*/swap partitions and for me works fine!
Thanks.
ahmgsk said:
Hi people u should hav pm me or -> come on gtalk
i hav never declined any persons request
Anyways -> my rom works only with ext2 patition
so please follow the guide
Swap + Ext2 + Fat32 (96mb Swap + 512 Mb Ext2 + Remaining fat32 ) (For 8Gb Card)
Step 01: Turn Off Ur Device
Step 02: Press Home Key and Power Key At The Same time
Step 03: Go To 6th Option 'Partition sdcard'
Step 04: Select Partition SD
Step 05: Press Home To Confirm
Step 06: Set Swap Size as per required Using -> Trackball OR Volume Key at Left of your Device
Step 07: Set Ext2-Size as per required Using -> Trackball OR Volume Key at Left of your Device
Step 08: Confirm your Action By using Home Button
Your Memory Card Partition Is Created
Now flash the rom
Step For Installation: -
Step 00: Check The SPL required for ROM.zip matches Your PHONE
Step 01: Turn Off Ur Magic
Step 02: Press HOME + POWER (To Enter Recovery)
Step 03: Go To Option 2 ' USB-MS toggle'
Step 04: Paste the ROM.zip in root of your SD-Card
Step 05: Hit Back Button to Return Back to Recovery Menu
Step 06: Go To Option 5 'Wipe'
Step 07: Preform Wipedata/factory reset
Step 08: Perform Wipe Dalvik-cache (If U don't have Partitions On SD-Card This will Give adb error)
Step 09: Perform Wipe SD:ext partition (If U don't have Partitions On SD-Card This will Give adb error)
Step 10: Hit Back Button to Return Back to Recovery Menu
Step 11: Go To Option 4 'Flash zip from sdcard'
Step 12: Choose The ROM.zip, Hit Home to Flash The Rom
Step 13: Select 1st Option 'Reboot system now'
Now -> u should get it working
for more tutorials -> check here
if not come on gtalk -> [email protected]
Click to expand...
Click to collapse
Thx God.....
The Masters Give Us The Informations.hee
Great....
LoGaY said:
Thx God.....
The Masters Give Us The Informations.hee
Great....
Click to expand...
Click to collapse
LOL hahaha
ahmgsk said:
Hi people u should hav pm me or -> come on gtalk
i hav never declined any persons request
Anyways -> my rom works only with ext2 patition
so please follow the guide
Swap + Ext2 + Fat32 (96mb Swap + 512 Mb Ext2 + Remaining fat32 ) (For 8Gb Card)
Step 01: Turn Off Ur Device
Step 02: Press Home Key and Power Key At The Same time
Step 03: Go To 6th Option 'Partition sdcard'
Step 04: Select Partition SD
Step 05: Press Home To Confirm
Step 06: Set Swap Size as per required Using -> Trackball OR Volume Key at Left of your Device
Step 07: Set Ext2-Size as per required Using -> Trackball OR Volume Key at Left of your Device
Step 08: Confirm your Action By using Home Button
Your Memory Card Partition Is Created
Now flash the rom
Step For Installation: -
Step 00: Check The SPL required for ROM.zip matches Your PHONE
Step 01: Turn Off Ur Magic
Step 02: Press HOME + POWER (To Enter Recovery)
Step 03: Go To Option 2 ' USB-MS toggle'
Step 04: Paste the ROM.zip in root of your SD-Card
Step 05: Hit Back Button to Return Back to Recovery Menu
Step 06: Go To Option 5 'Wipe'
Step 07: Preform Wipedata/factory reset
Step 08: Perform Wipe Dalvik-cache (If U don't have Partitions On SD-Card This will Give adb error)
Step 09: Perform Wipe SD:ext partition (If U don't have Partitions On SD-Card This will Give adb error)
Step 10: Hit Back Button to Return Back to Recovery Menu
Step 11: Go To Option 4 'Flash zip from sdcard'
Step 12: Choose The ROM.zip, Hit Home to Flash The Rom
Step 13: Select 1st Option 'Reboot system now'
Now -> u should get it working
for more tutorials -> check here
if not come on gtalk -> [email protected]
Click to expand...
Click to collapse
sorry last questions....
can i use it for my 2GB MicroSD?
or just for 8GB MicroSD or Higer?
I am currently trying to root my S3 using the instructions from http://forum.xda-developers.com/showthread.php?t=1762709 I got to section 2 where i saw the following instructions. I followed them to the 2 but then at step 6 instead of installing the zip i hit reboot. Now the phone is stuck at the page where it says Samsung Galaxy SIII. This page shows up as soon as I plug the battery in. Did I brick my phone?
Step 2: Download and install the EZ recovery App from HERE (If your coming from section 1 and already have a custom recovery, reboot recovery and skip to step 4).
Step 3: Open app, select CWM recovery, tap the pulldown menu, choose CWM 6.0.1, select flash, then reboot recovery.
Step 4: Perform a Nadroid Backup from the "back up/restore" menu(optional but recomended)!
Step 5: Wipe Data/Factory reset, then under the "mounts & storage" menu Format System.
Step 6: Navigate to "install zip from sdcard", then from there "choose zip from sdcard", and finally install the rom you downloaded in step 1.
Step 7: Reboot.
alnwpi said:
I am currently trying to root my S3 using the instructions from http://forum.xda-developers.com/showthread.php?t=1762709 I got to section 2 where i saw the following instructions. I followed them to the 2 but then at step 6 instead of installing the zip i hit reboot. Now the phone is stuck at the page where it says Samsung Galaxy SIII. This page shows up as soon as I plug the battery in. Did I brick my phone?
Step 2: Download and install the EZ recovery App from HERE (If your coming from section 1 and already have a custom recovery, reboot recovery and skip to step 4).
Step 3: Open app, select CWM recovery, tap the pulldown menu, choose CWM 6.0.1, select flash, then reboot recovery.
Step 4: Perform a Nadroid Backup from the "back up/restore" menu(optional but recomended)!
Step 5: Wipe Data/Factory reset, then under the "mounts & storage" menu Format System.
Step 6: Navigate to "install zip from sdcard", then from there "choose zip from sdcard", and finally install the rom you downloaded in step 1.
Step 7: Reboot.
Click to expand...
Click to collapse
Power off the phone than try holding power+volume up+home button to re-enter into recovery. Once you are in recovery (as long as it is the CWM recovery) continue from where you left off.
How to put a custom rom on your mediatek device
this tuturial os for OEM rebrands of "Chinese Manufactured" phones
Warning: if your phone isnt has a commercial OEM Brand, think twice before putting a custom rom on it, you must find a experience about Mediatek devices, before you proceed.
Requirements:
1. Fully Working Unit ( with atleast 50% battery )
2. Relaible Internet connection
3. Good Google Search Skills
4. Lasest Mobile Uncle App ( Link here )
5. Recovery ( its a ".img" file )
6. Custom Rom ( its a ".zip" file )
What will Happen After:
1. All your Apps would possibly be gone ( you can redownload )
2. you have root privalages
3. you Have a custom rom on device
Step 1: first you must root your device
Step 1.1: list of Rooting Apps for PC and Android
Step 2: Find an Apropriate Recovery and Custom Rom( must be the exact recovery/rom for your device, unless it wont work )
Step 2.1: Google the Following Terms:
- "[name/model of Device] CWM Recovery"
- "[name/model of Device] TWRP Recovery"
- "[name/model of Device] Custom roms"
Goal: the goal is to find the ".img" file recovery, and the ".zip" file Custom Rom
Note: from there, you are on your own on how to download those files.
Step 2.2: If you cant find any on those search terms, try these:
- "Rebrand of [name/model of Device]"
Goal: is to find the Rebrand Version ( means exact device but different country or brand ) of your device
Note: check "ALL" the specs of the device if its a match, if you found it proceed to "Step 2.3"
Step 2.3: Google...
- "[name/model of rebrand device] Custom Roms"
- "[name/model of rebrand device] CWM Recovery"
- "[name/model of rebrand device] TWRP Recovery"
Goal: is to find the custom rom and recovery for the rebrand device, which is can be used to yours.
Step 2.4: if you really cant find any, just log-in to your Facebook Account, and Search for a fan group of your device, from there you may find a Recovery and Custom Rom files
Step 3: now you have the requirements, lets install the Rom
Step 3.1: Copy your "Custom Rom" and "Recovery" on Internal "AND" External Storage of the Phone, if you dont have enough space, please delete or back up some of your files
Step 3.2: Install Mobile Uncle App
Step 3.3: After installing open Mobile Uncle App and "grant root access" on your device
Step 3.2: Now go to Recovery Update, and select the recovery.img you downloaded
Goal: is to install Custom Recovery, by installing the ".img" that you put on internal or external
Step 3.4: if its said reboot to recovery, click yes!
GOal: to go to the recovery, for few seconds it will reboot, and you will the the interface of the recovery, if it doenst go to recovery, you repeat the process of installing the recovery, or you got the wrong ".img" for your device, and you must find the proper one again.
Step 4: Back Up Current/Stock Rom
- For CWM Recovery ( ClockWorkMod )
How to Use: Volume UP = UP, Volume Down = Down, Power = Select, Back Button = Back )
Step 4.1: go to...
- Back up and restore
- Then select Back Up or Back up to internal/external SD Card
Warning: if it fails, reboot to Android, and delete/back up again all the files
- For TWRP Recovery ( Team Win Recovery Project )
How to use: it is touch based
Step 4.1: go to...
- Back Up
- Put "X" mark on each box ( "x" means select or "check" )
- Slide to Back up
Warning: if it fails, reboot to Android, and delete/back up again all the files
Note: it will now start to back up, you can charge the phone while backing up or connect it to your PC, and wait for the process to complete
Step 5: Put the Custom Rom on your device
- For CWM Recovery
Step 5.1: go to...
- Install Zip
- "Choose Zip from /sdcard" or "Choose Zip from extsdcard
- Then Find the ".zip" file you put there
- and click "yes"
Note: it will now start to Install the Rom, you can charge the phone while installing the rom or connect it to your PC, and wait for the process to complete
Warning: if it fails, you got a wrong/corrupt custom rom and you must download another or you must find a TWRP recovery for your device
- For TWRP Recovery
Step 5.2: go to...
- Install Zip
- Find the ".zip" file you put on both internal and external
- and Slide to Install
Note: it will now start to Install the Rom, you can charge the phone while installing the rom or connect it to your PC, and wait for the process to complete
Warning: if it fails, you got a wrong/corrupt custom romand you must download another or you must find a CWM recovery for your device
Step 5.3: if everything now goes smooth, it finnished the installing of the rom, without warning you must factory reset your device, to avoid Bootlopp ( Softbrick )
- For CWm
Step 5.3.1: go to...
- Wipe Data / Factory Reset
- and yes
- then Advanced
- Wipe Dalvik Cache ( Select "Yes" if it prompt )
- then Reboot
- For TWRP
Step 5.3.1: go to...
- Wipe
- Mark "x" only "Data", "Cache", "Dalvik Cache"
- Then Slide
- After Thar Reboot to System
Note: if you do exactly everything, it must boot to android, and everything should be working smoothly
Hi all,
I tried to install Android Revolution HD 52.0, but it didn't work. I tried to do it according the following steps:
I rooted my samsung galaxy S3:
Step 1 – Download the above mentioned file for Galaxy S3 to your computer. (Android Revolution HD 52.0)
Step 2 – Connect and mount your Galaxy S3 USB memory on your computer using the USB cable.
Step 3 – Now copy/paste the downloaded Android_Revolution_HD-SGS3_40.0.zip file to your SD card. Make sure the file is in the SD card root (not in any folder).
Step 4 – Then turn OFF your phone and disconnect from the USB cable.
Step 5 – Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together.
Step 6 – Then, perform a cache wipe by selecting “wipe cache partition” as you can see in the image below
Until here everything just work fine, but step 7 didn't work. I don't have an advanced option so I couldn't clear the dalvik cache.
Step 7 – Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.
The I did step 8 and 9.
Step 8 – Then go back to the main recovery screen and select “install zip from SD card"
Step 9 – Now select “choose zip from sdcard” as shown below. Using your volume keys, navigate to the Android_Revolution_HD-SGS3_40.0.zip file that you copied to your SD card and select it using the Power button. Setup will start now.
It looked like everything went OK because it said everything was installed, but there wasn't a next step anymore.
I just got back in recovery mode. So 10 and 11 aren't done.
I rebooted the device and the stock ROM was on the device.
Step 10 – AROMA Installer will start now. Choose Data Wiping Option if you’re coming from stock firmware or any other Custom ROM. (Skip this step if you’re coming from an earlier version of this Firmware). Follow the on-screen instructions.
Step 11 – After the installation completes, Reboot your phone by selecting “Reboot system now” from ClockworkMod Recovery menu as shown in the picture below. It might take a couple of minutes on first boot. So, be patient.
Can someone help me with this?
If you need more information I can provide it.
With kind regards
Harm
What recovery are you using and which version?
Pls Help Me to Root My Device
Sent from my Karbonn TITANIUM S20 using XDA Free mobile app
Alas!
alKavinraj said:
Pls Help Me to Root My Device
Sent from my Karbonn TITANIUM S20 using XDA Free mobile app
Click to expand...
Click to collapse
I see no one cared to answer the question so here I am with a full solution. This method below is there on other blogs and is the one i used.
Note: I take no responsibility if you brick your phone or something even though its an extremely simple procedure. Excluding the download time and the other stuff this process will take less than 2 minutes. Also, since you are not replacing you rom or something, all your data should remain intact, still please make a backup of all your important stuff. Lets get on with it.
Step 1: First of all download the drivers from the following link, install them on your PC and restart it.
http://www.mobistel.com/wordpress/wp-content/download/Driver.zip
Step 2: Download and extract the Karbonn titanium Rooting Kit.
http://www.4shared.com/zip/nfiO8VUWce/Titanium_S20_Rooting_kit.html
Step 3: Extract the Karbonn T S20 CWM Recovery.zip and the Sp-flashtools.zip.
Step 4: Go to the spflash tools extracted folder and open the "Flashtool.exe" as administrator.
Step 5: After it opens click on the "Load Scatter" option and select the "MTK6582_Android_scatter_emmc.txt".
Step 6: Check the box next to Recovery option among the options that comes after selecting scatter file. Click on the locations tab in the row of "recovery option" which you just selected.
Step 7: After doing the above, click on download.
Step 8: Now switch off your Karbonn Titanium S20 and connect the phone to PC via Data cable with the battery inside
Step 9: Wait till the process is finished and a green color Tick mark appears on the screen of the Sptools.
Step 10: After this remove the data cable, and press (Vol up + Power) Button simultaneously to go into the CWM recovery mode.
Step 11: In CWM recovery mode, select Mount and Storage -> Mount USB storage -> now connect the phone via data cable.
Step 12: Put the "Update-SuperSu.zip" in the Sd card (Do not extract it). Now Disconnect the phone and reboot it in CWM (recovery mode) again.
Step 13: Select the "Install Zip from sd card" -> "Choose Zip from Sd card" -> "Update-binary.zip" on the Sd card and flash it.
Step 14: Reboot. Now you have rooted your karbonn titanium s20 and also installed the CWM on your phone.
Step 15: Profit!
Do hit the thanks button if this helps ya!