Samsung Galaxy Fit is one of the most famous device which is known because of it’s affordability and great price. Galaxy Fit users can now enjoy Rooting the device, and due course of this article we will tell you how you can install Custom Recovery on your device after Rooting it..
Warning for Beginners:
Note: This is an rooting and installing process for the mobile phone named Galaxy Fit S5670 and has to be applied to the Mobile phone using the Recovery Mode in the mobile phone. The steps which are included in this guide are very risky and can even brick off your mobile phone. Unless you are aware with Custom ROMS, Firmwares and ODIN, don’t even try these things on your mobile phone..
Pre-Requisites to Root and Install Custom Recovery on your Samsung Galaxy Fit
The instructions are working for Samsung Galaxy Fit, S5670 Originally manufactured.
Backup all of your SMS Messages using SMS Backup Application.
Sync all of your Contacts with the Gmail Application.
Copy all of your notes manually to somewhere else, as if in case your mobile phone gets bricked these notes will be deleted from the mobile phone.
Take a backup of call logs, APN Settings, and other important things.
Charge your mobile phone so that it would be having more than 60% battery.
Now, enable USB Debugging Mode in your mobile phone (Settings > Applications >Development > USB Debugging).
Samsung Device drivers installed in your computer.
Follow all steps carefully in order to get 100% assured success.
How To Root and Install Custom Recovery on your Samsung Galaxy Fit
Note: We have written each and every step clearly in order to make the rooting process successful but if any wrong step is taken then Neither me nor thedroidnation.com will be held responsible in case your device gets bricked.
Download Odin, Rooting File and the OPS File from the links to your computer and move them to a new folder in order to prevent any confusions.
Turn off your mobile phone and bring the mobile phone to download mode (hold the Volume Down button + Home Key + Power Button and the device will start itself).
Now, Shoot up the ODIN executable file.
Click on the OPS Tab in the ODIN window and select the “BENI_v1.0.ops” file after that tick the “One Package” option and select the file “beni_cwm-5_ext4_v2“.
Connect your mobile phone to the computer, and wait for the device drivers to get installed. After the installation of drivers is complete then the ID:COM section in the ODIN downloader window will turn yellow.
Wait for some time, and as soon as the installation is complete the phone will reboot itself. Now, you can remove the USB cable.
Now, You can access recovery mode on your mobile phone by holding Volume Up + Home Button + Power Key and the device will start itself.
Now, select “Wipe data/factory reset” & “Wipe Cache partition” one-by-one and the device caches will be cleared off. After this select “Wipe dalvik cache“.
Congratulations!! You’ve successfully installed Custom Recovery in your Samsung Galaxy Fit...
Press Thanks button If I help U in any manner...
Source
http://thedroidnation.com/samsung/g...s5670-root-install-custom-recovery-image.html
Aspire said:
Source
http://thedroidnation.com/samsung/g...s5670-root-install-custom-recovery-image.html
Click to expand...
Click to collapse
Thankss for d souce..
copied
samo_gf said:
copied
Click to expand...
Click to collapse
Everything he puts on this portal is a copied.
Universal Gingerbread Root & Unroot 2.3.3 -> 2.3.7+
If somebody want to ROOT and UNROOT on Gingerbread you can follow me here: GT-S5670, GT-S5670B, GT-S5670L
I get stuck at RAMDUMP Mode (ARM9 mode) D:
Did i do something wrong? (when accessing the recovery)
Hello!
This process works on GT-S5670B?
Thank you! =D
Alternative Way Of Rooting Your Mobile
1.Download The update.zip from this link
2.Put In the sdcard.
3.Boot In the recovery menu by pressing "home + power" button.
4. select "apply update.zip" from the menu.
5.wait 2-5 seconds to take the effect
6. Now select "reboot system".
4.Thats It.... You've Rooted Your Phone And have Got The SuperUser Access!!
Thank You!!
Thanks a lot!!!
asen121 said:
1.Download The update.zip from this link
2.Put In the sdcard.
3.Boot In the recovery menu by pressing "home + power" button.
4. select "apply update.zip" from the menu.
5.wait 2-5 seconds to take the effect
6. Now select "reboot system".
4.Thats It.... You've Rooted Your Phone And have Got The SuperUser Access!!
Thank You!!
Click to expand...
Click to collapse
this is the best method ive ever seen to root a device
easy and safe...it can b done eyes closed!!!
asen121 said:
1.Download The update.zip from this link
2.Put In the sdcard.
3.Boot In the recovery menu by pressing "home + power" button.
4. select "apply update.zip" from the menu.
5.wait 2-5 seconds to take the effect
6. Now select "reboot system".
4.Thats It.... You've Rooted Your Phone And have Got The SuperUser Access!!
Thank You!!
Click to expand...
Click to collapse
is it for gingerbread 2.3.4version?? and if not will it work for that version..??
adyt5 said:
is it for gingerbread 2.3.4version?? and if not will it work for that version..??
Click to expand...
Click to collapse
yup!
it works!
Use Root Genius or srs root...
Dear funbook users i have seen a lot many people are very much confused about rooting the funbook and are using the Sparky Root method and are getting nothing from it.
Below is a details step by step procedure for getting root in a safe manner.
For this i am assuming that you have no knowledge and you are doing this for the first time.
Step 1: Installing ADB Drivers
Step 2: Installing ClockworkMod Recovery
Step 3: Installing SuperSU by Chainfire
Important:If you have completed any of the above steps then you dont have to repeat them.
First of all download the 2 files in the link below
cwm5ics.rar
CWM-SuperSU-v0.75.zip
Step 1: Installing ADB Drivers
(i). Extract the ADB folder from the cwm5ics.rar and put it onto your desktop.
(ii). Then Connect your device with the computer and it will start detecting it. If you haven’t installed the drivers then the installation of the device will fail. Don’t Worry.
(iii). Go to the device manager and there you will find and unknown device. Right click on it and click on Update driver link.
(iv). Then click the browse my computer link and navigate to the ADB folder link on the Desktop. Inside the ADB folder you will find two folders 32Bit drivers and 64Bit drivers. Select your computer specific and select ok.
(v). I many cases you will get a warning about installing the driver. Dont bother it and click on the Install Anyway button.
(vi). Wait for some seconds and the Drivers will be installed and your device will be listed in the device manager.
Important: Before installing Recovery just transfer the CWM-SuperSU 0.75.rar to your device internal memory.
Step 2: Installing ClockworkMod Recovery
Android Debugging should be enabled in your Device.
Go to Setting>Developer Options>Android Debugging---Tick this
(i). Go to the cmw5ics folder and you will find a file naming Recovery-install.bat run that file.
(ii). Follow the onscreen instructions and it will give you 3 options. Select the first option by pressing 1 and then enter. This will install ClockworkMod Recovery.
(iii). After it is done the menu will appear again and the select the option 2 and your device will boot into clockwork MOD recovery.
(iv). Disconnect your device from the USB as it starts to reboot.
Alternate way of entering into the Recovey is that switch off your device and switch it on by pressing the power button while peressing the home/Options button.
Navigation in Clockwork Mod Recovery
Power Key = For Selection
Volume Keys = For going up and Down
Back Key = For going back.
Step 3: Installing SuperSU
(i). Now you are into the clockwork mod recovery
(ii). Select the option Install zip from SD card
(iii). Then select the option choose zip from internal SD card as we have placed CWM-SuperSU 0.75.rar in the internal Sdcard.
Alternatively: If you have placed the file on you external SDcard then you have to select the option of Choose zip from SDcard.
(iv). There you will see the file CWM-SuperSU 0.75.rar navigate to it by the volume keys and select it with the power keys.
(v). After selecting it you will see multiple lines with 'NO' and a single line with the name of the file. Go to the line with the name of the file and select it.
(vi). Installation will be done and Supersu will be installed on your device. Just press the back key after the installaton is complete and select the option of rebooting the device.
(vii). Just run the SuperSU app after the reboot and update the SU Binary and you are done.
The method contains all the necessary steps top bne taken and are well ordered and placed. If there is any mistake menting them in the posts below and i will correct them.
If you want any other guide then also post below i will try and help as much as i can.
This method is preffered by me and is proven better then the superuser app. This method is followed by me always for this device.
There are other methods as running a script will give you superuser but the method followed above is a better and a persistent one.
Trust me you wont regret.
Disclaimer: All the above steps are really safe to attempt but in any case if your device wont work after all these then i am not responsible in any way.
You accept and agree that all the risks and rewards incidental to this act will be yours.
Earlier we posted the screenshots, claiming to finally have nailed Qmobile Noir A7. Here is the most requested post for the step by step method of rooting, All you are required to do is follow the steps.
Installing CWMR
1. Download the Files
i. Scatter and CWMR for A7(Download Here)
ii. SPFlashTool ( Download Here )
iii. Drivers for A7 – CD or from the Q site.
iv. root_a7.zip( Download Here )
2. With phone on, connect the phone to the computer and start USB Debugging.
3. Install the Drivers to it through driver file.
4. Now Switch the phone off and connect the phone to the computer again. It’ll ask you to install the another driver. Install it from the preloaders downloaded.
5. Put the file in Scatter per Image Below.
6. Ensure nothing but the recovery check box is clicked. Rest remain unchecked.
7. Switch off your Phone. Take the Battery out for 5 Secs and reinsert the Battery.
8. On Flashtool press download.
9. Connect your phone cable connecting it to the computer. No hurries take your time. (Ensure when download was clicked your phone was not connected to the phone)
10. Upon successful flashing you will see the green circle icon.
11. Close the tool and restart your phone in recovery mode by holding power + Volume up
12. You should be able to enter CWMR.
Rooting Phone
Download Root_A7.zip file
Copy to SD card.
Power off your phone.
Turn on by pressing power button + volume up button.
Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “Root_A7.zip” –> Select Yes
When done Successfully Go Back main CWMR And Reboot your phone.
Check your applications section you’d have superuser there.
Open Superuser app and in settings update your binaries.(Congratulations you are rooted).
PS : INCPak never lied to anyone, doubt ever us we just ensure that this procedure is verified and doesn’t mess your phone !
- See more at: http://www.incpak.com/tech/lets-root-qmobile-noir-a7/#sthash.Vds1TVe2.dpuf
CREDITS:UBAID KHAN AND KHURRAM
Well, This thread is under construction!
Pending
1. Rooting Done :good:
2. Custom Recovery Done :good:
3. Patches/Addons
4. Custom Roms
Click to expand...
Click to collapse
Flashing Stock Rom (Unbricking)
Did you bricked your device ? are you looking for a way to fix it? If yes, Follow the steps given below.. This tutorial will take you through the fixing process. This method is compatible only with the mtk devices. So, lets start.
Stock Rom - Click Here!
For steps, watch this video. This is made for Micromax Unite2, so you must use 'Download' option instead of 'firmware>upgrade' in SP Flash tools.
Rooting
You can use Kingroot or framaroot to get root access.
Kingroot - <MOD EDIT - LINK REMOVED> Click Here!
ClockWorkMod Recovery
Download these:
Recovery + Patched Boot - <MOD EDIT - LINK REMOVED> Click Here!
SP Flash Tools + Drivers - <MOD EDIT - LINK REMOVED> Click Here!
Mobile Uncle Tools -<MOD EDIT - LINK REMOVED> Click Here!
Backup your IMEI/NVRAM
Step 1: Open Settings > About Phone (tap on 'build number' for 7 times.)
Step 2: Go back, Then open 'Developer Options'.
Step 3: Enable USB debugging.
Step 4: Open MTKdroidTools on PC & connect your phone via USB cable.
Step 5: In MTKdroidTools click ROOT and grant root permission in phone.
Step 6: Click IMEI/NVRAM.
Step 7: Click Backup.
Making a Nandroid Backup
Step 1: Make sure at least 3-4 GB space is free in external sd card. The backup size can be 2 GB, 3 GB or even more depending on installed apps and data size.
Step 2: Reboot to recovery (Switch off phone. Press vol up + vol down + power button to reboot to recovery).
Step 3: Press vol down to select backup and restore then press power button.
Step 4: Select backup then press power button.
Step 5: Wait for backup to complete. If shows error while backing up data then reboot phone and delete unsuccessful backup from clockworkmod folder and delete some more files to free space in sd card. Repeat from step 1.
Step 6: You'll see Backup Complete! after successful backup. Now you can use this backup to restore system if you face any error in future like bootloop or soft brick. You can also use this nandroid backup to revert back from new ROM. The backup is stored in clockworkmod folder in external SD card.
Warning: Never try to edit nandroid backup files. Keep nandroid backup in SD card as it is. Tips: Don't forget to delete old nandroid backup after taking new backup. You can also keep two or more nandroid backups for safety.
Credits:
(for stock Rom)
Thread is closed since OP Chose to use Pay Per Click Links in violation of XDA Rules.
How to root, how to install custom recovery last but not the least how to install custom ROM and make your Mobile FAST
How to ROOT
Step 1. You need to download MI4I TOOLKIT.
Step 2. Once file is downloaded extract .zip file.
Step 3. Go to your Phone Settings-About phone-Click MIUI version option and tap it for 7 times. After 7 taps, a notification should appear saying " You are now a developer"."Developer mode has been enabled" or "You have enabled Developer Options".
Step 4. Go to Settings-Additional Settings-Developers Options. Turn on USB Debugging.
Step 5. Go to the folder where you had downloaded the Toolkit . Open the folder you will found Start Command Prompt file (CMD FILE), and Right click on Start and Run as Administrator. (Make sure Xiaomi PC suit is not working in background to end the PC suit process , open Task Manager click on the process find Mi PC Suit select the process and click End Process).
Step 6. For rooting your phone:- press 1 and Press Enter and there will be a notification in your phone Allow this notification and your phone will go into Bootloader, have patience it will take 5 minutes.
After your phone is restarted you will find the APP called SUPERSU. Open supersu and update binary, click the Normal button and reboot your phone.
How to install CUSTOM RECOVERY
Step 1. Go to the folder where you downloaded the Toolkit. Open the folder you will found Start Command Prompt file (CMD FILE) and Right click on Start and Run as Administrator.
Step 2. Press 2 and Hit Enter and there will be a notification in your phone, Allow this notification and your will go into Bootloader, it will take 2 minutes. After your phone restarted TWRP CUSTOM RECOVERY is successfully installed.
Step 3. To find your phone is having custom recovery, you will have to press Volume UP and Power Button/Lock Button together about 6 or 7 seconds your phone will restarted in TWRP CUSTOM RECOVERY MODE.
How to install Custom ROM
BACKUP YOUR PHONE DATA IN SECURE PLACE for backup your data Download BACKUP App
Step 1. First thing first you need to select and download the custom rom. For ROMS click here.
Step 2. You need to download GAPPS (Google Apps i.e Play Store). For MI4I you will select PLATFORM-ARM64, ANDROID-it depends upon on your rom android version, VARIANT-if don't want lots of google apps download PICO either you need to download STOCK.
Step 3. Copy these zip file into your OTG Pen-drive or with the help of OTG cable and insert your pen-drive in your phone.
Step 4. Open your Custom Recovery (press Volume UP and Power/Lock Button together).
Step 5. When Custom Recovery is open click on WIPE-ADVANCED, WIPE-Tick Dalvik Cache, System, Cache and Data. Slide Swipe to Wipe Left to Right.
Step 6. Click On Home Button and now click install then Click UP A LEVEL swipe down you will found USB_OTG and Navigate your Custom Rom and GAPPS.
Step 7. Install Custom Rom, after installation wipe cache and install GAPPS when gapps is installed successfully, you need to wipe cache and format the data when data is formatted click on REBOOT-System.
This Process will take max 15 minutes.
Now you are successfully installed the ROM enjoy . PEACE
'fastboot' is not recognised as an internal or external command, operable program or batch file.
what did it mean. and im getting this when i press 1 to root my mi 4i .
i turned on usb debugging successfully .
what shall i do now
Pavankumar1999 said:
'fastboot' is not recognised as an internal or external command, operable program or batch file.
what did it mean. and im getting this when i press 1 to root my mi 4i .
i turned on usb debugging successfully .
what shall i do now
Click to expand...
Click to collapse
install fastboot drivers
https://www14.zippyshare.com/v/ufYG71o0/file.html
thwn follow process