So I've got a Mate 8 from the Alibaba website. Got it yesterday, did OTA upgrade. Latest one was NXTL-L29C432B180. I wanted to upgrade to the new EMUI 5.0. I've successfully unlocked the bootloader. Tried all bunch of Update.zip files. Most wouldn't work. One actually worked but whenever it finished install (i used manual update through the *#*# keypad sequence) it went back into original 6.0MM as if no update was finished. Tried that few more times with same results. They i saw on the forum a way to update with flashing SU fFirst, followed by the some EU_HW file then followed by the UPDATE.ZIP. Well that messed up my phone, Tried everything to unbrck it..
I then turn over my phone and I see that the model number is actually NXT-DL00. So I am assuming the seller flashed the EU Firmware on the Chinese version of the phone. I've tried Rayglove Knife Unbrick method, but it hasn't helped.
I've found a Nougat 7 update_data_full_dualcu_cn.zip file and flashed using TRWP. Instead going into Huawei Erecovery (which hasn't work either) it just sits in the "Your device has been unlocked and can't be trusted screen" with a message "Your device is booting now".
I am getting pretty desperate guys. I've never had this much issue with my Note 3 and Note 4 phones. Can somebody please suggest what I can do next?
You want the EU or China Firmware?
letschky said:
You want the EU or China Firmware?
Click to expand...
Click to collapse
At the point ill take whatever works. Also, I've never seen this before but my Touch functions on TWRP, eRecovery or any other thing no longer works.
Have you flash only update_data_full_dualcu_cn.zip without the Update.zip?There are 2 Files to flash
letschky said:
Have you flash only update_data_full_dualcu_cn.zip without the Update.zip?There are 2 Files to flash
Click to expand...
Click to collapse
At this point because my touch function is not working I can't use TWRP. How can I flash this now?
another Question,have you changed your Custom.bin and Oem.info from L29 to DL00?
Do you have no successfully Update to Emui 5.0 with no Version with Dload or Twrp and you are still on Android 6.0?
---------- Post added at 08:51 AM ---------- Previous post was at 08:35 AM ----------
If you on C432
Download this Firmware B180 and unpack it.
Download Huawei Extractor here and install it
Open Huawei Extractor and extract from the downloaded unpacked UPDATE.APP,system,cust,boot and recovery and copy in your Fastboot/adb Folder.
Boot in Bootloader and connect the M8 to the Pc.
With this commands flash the img files (cd C:\ADB)
fastboot flash boot BOOT.img
fastboot flash recovery RECOVERY.img
fastboot flash cust CUST.img
fastboot flash system SYSTEM.img
After flash all img files,Factory Reset.
if you on Bricked Emui 5.0
Flash Stock Recovery from Emui 5.0 also extract from Update.zip and extract the recovery from the Update.app to your adb Folder and flash the recovery
fastboot flash recovery RECOVERY.img
And look here
srdjmor said:
At this point because my touch function is not working I can't use TWRP. How can I flash this now?
Click to expand...
Click to collapse
Use Logitech Wireless Touch Keyboard K400 or any keyboard with touchpad built in via mirco port.
And you need not Touch to reboot in Bootloader and flash the img files.
Can you Power off the Phone?
If not,
Press 10 sec Power to reboot,after vibrate Press Volume - and hold and put in your USB Cable when comes the Huawei Logo release the Vol-.
And you booting in Bootloader
If Bootloader locked,unlock again
Flash the img files via Fastboot.
letschky said:
another Question,have you changed your Custom.bin and Oem.info from L29 to DL00?
Do you have no successfully Update to Emui 5.0 with no Version with Dload or Twrp and you are still on Android 6.0?
---------- Post added at 08:51 AM ---------- Previous post was at 08:35 AM ----------
If you on C432
Download this Firmware B180 and unpack it.
Download Huawei Extractor here and install it
Open Huawei Extractor and extract from the downloaded unpacked UPDATE.APP,system,cust,boot and recovery and copy in your Fastboot/adb Folder.
Boot in Bootloader and connect the M8 to the Pc.
With this commands flash the img files (cd C:\ADB)
fastboot flash boot BOOT.img
fastboot flash recovery RECOVERY.img
fastboot flash cust CUST.img
fastboot flash system SYSTEM.img
After flash all img files,Factory Reset.
if you on Bricked Emui 5.0
Flash Stock Recovery from Emui 5.0 also extract from Update.zip and extract the recovery from the Update.app to your adb Folder and flash the recovery
fastboot flash recovery RECOVERY.img
And look here
Click to expand...
Click to collapse
I haven't done anything myself. As soon as I got the phone i did 3 or 4 OTA updates. Final version was NXT-L29C432B180, but on the back of the phone its a DL00. What gave me the bootloop was when i flashed
these 3 files and then restarted the phone from this thread
https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042
1- Download these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/d...ull/update.zip
1.2- http://update.hicloud.com:8180/TDS/d...full_hw_eu.zip
1.3- http://www.sillanwali.com/downloads/..._v2.79_sr2.zip
So I am not really sure on what EMUI I am on.
I will try your procedure above. How do I factory reset the phone after I flashed the img files?
srdjmor said:
I haven't done anything myself. As soon as I got the phone i did 3 or 4 OTA updates. Final version was NXT-L29C432B180, but on the back of the phone its a DL00. What gave me the bootloop was when i flashed
these 3 files and then restarted the phone from this thread
https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042
1- Download these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/d...ull/update.zip
1.2- http://update.hicloud.com:8180/TDS/d...full_hw_eu.zip
1.3- http://www.sillanwali.com/downloads/..._v2.79_sr2.zip
So I am not really sure on what EMUI I am on.
I will try your procedure above. How do I factory reset the phone after I flashed the img files?
Click to expand...
Click to collapse
I flashed all 4 image files from the 180 FW, restarted the phone with reboot command. Phone boots once, restarts, boots second time and goes straight into eRecovery
letschky said:
another Question,have you changed your Custom.bin and Oem.info from L29 to DL00?
Do you have no successfully Update to Emui 5.0 with no Version with Dload or Twrp and you are still on Android 6.0?
---------- Post added at 08:51 AM ---------- Previous post was at 08:35 AM ----------
If you on C432
Download this Firmware B180 and unpack it.
Download Huawei Extractor here and install it
Open Huawei Extractor and extract from the downloaded unpacked UPDATE.APP,system,cust,boot and recovery and copy in your Fastboot/adb Folder.
Boot in Bootloader and connect the M8 to the Pc.
With this commands flash the img files (cd C:\ADB)
fastboot flash boot BOOT.img
fastboot flash recovery RECOVERY.img
fastboot flash cust CUST.img
fastboot flash system SYSTEM.img
After flash all img files,Factory Reset.
if you on Bricked Emui 5.0
Flash Stock Recovery from Emui 5.0 also extract from Update.zip and extract the recovery from the Update.app to your adb Folder and flash the recovery
fastboot flash recovery RECOVERY.img
And look here
Click to expand...
Click to collapse
I have also just tried flashing recovery.img from the EMUI 5 located at this thread . No change in behaviour.
https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c432b560-official-t3540042
What about the update_full_hw_eu.zip file?
On 180 your Bootloops have you tried a Factory Reset?
You are on C432 this is Euro Version Your Phone is china Version.
I have Asia C636 Version and converted to Euro Version and is good so.
You are from Europe?
Data EU zip is for Euro Version with all Data for Europe and Apps....
My Situation on B180,Ota to B192 and Ota to B560 and all works,later i install Twrp Insecure Boot img and Root the Phone,its all very easy
letschky said:
On 180 your Bootloops have you tried a Factory Reset?
You are on C432 this is Euro Version Your Phone is china Version.
I have Asia C636 Version and converted to Euro Version and is good so.
You are from Europe?
Data EU zip is for Euro Version with all Data for Europe and Apps....
My Situation on B180,Ota to B192 and Ota to B560 and all works,later i install Twrp Insecure Boot img and Root the Phone,its all very easy
Click to expand...
Click to collapse
How do I perform a factory reset? All I have done was just flashed the IMG files and rebooted the phone using the fastboot reboot command
letschky said:
On 180 your Bootloops have you tried a Factory Reset?
You are on C432 this is Euro Version Your Phone is china Version.
I have Asia C636 Version and converted to Euro Version and is good so.
You are from Europe?
Data EU zip is for Euro Version with all Data for Europe and Apps....
My Situation on B180,Ota to B192 and Ota to B560 and all works,later i install Twrp Insecure Boot img and Root the Phone,its all very easy
Click to expand...
Click to collapse
I am in Canada. When I received the phone with the B180 it worked fine before i tried to upgrade to 5.0
Press Power 10 sec the Phone reboot,Hold Vol+ and Power Button at same Time so long to ser the Huawei Logo,this boot in Menu to Factory Reset
---------- Post added at 07:31 PM ---------- Previous post was at 07:25 PM ----------
I think you must be on B192 to Update to B560
---------- Post added at 07:32 PM ---------- Previous post was at 07:31 PM ----------
Is there no Ota for you from 180 to 192?
letschky said:
Press Power 10 sec the Phone reboot,Hold Vol+ and Power Button at same Time so long to ser the Huawei Logo,this boot in Menu to Factory Reset
---------- Post added at 07:31 PM ---------- Previous post was at 07:25 PM ----------
I think you must be on B192 to Update to B560
---------- Post added at 07:32 PM ---------- Previous post was at 07:31 PM ----------
Is there no Ota for you from 180 to 192?
Click to expand...
Click to collapse
the very last OTA was L29c43b180. I remember i wrote it down on a piece of paper infront of me just so I know in case this happened. EMUI was 4.0. There were no available updates after that.
Ive tried holding the Power key + VolUp...it just takes me to eRecovery
Ok boot to erecovery and shot down.
Press and hold at same time Volume up and Power Button and release when you see the Huawei Logo.
You are on B180 Stock Recovery.img and not on B560 Recovery?
---------- Post added at 07:58 PM ---------- Previous post was at 07:55 PM ----------
Better first Volume up and then Power Button
letschky said:
Ok boot to erecovery and shot down.
Press and hold at same time Volume up and Power Button and release when you see the Huawei Logo.
You are on B180 Stock Recovery.img and not on B560 Recovery?
---------- Post added at 07:58 PM ---------- Previous post was at 07:55 PM ----------
Better first Volume up and then Power Button
Click to expand...
Click to collapse
Came into Factory Reset. Selected Whipe data/Factory Reset. After half a second, it flashed failed and goes back to the Factory Reset menu with an ! ( a red exclamation mark). I've tried few times. Yes, i've just reflashed boot, recovery, cust, and system from 180 that I extracted from update.app file.
I dont understand what is happening. I've worked on Note 3 and Note 4 with roots and bootloops and was always able to reflash it with a stock rom very easily. but this .....
Ok,next,copy the UPDATE.APP from B180 on Sd Card in Folder named:dload
Power off the Phone
Press and hold Vol up,Vol down and Power Button at same time so long to see flash Flash Procedur.
in c432b180 you can upgrade from hisuite way, is simple.
your problem is unbrick...
try srk tool, (flash boot, recovery, system and cust img files)
Enviado desde mi HUAWEI NXT-L29 mediante Tapatalk
Related
bricked my huawei Mate 8 NXT-L29 after flash plzz HELP :crying:
[email protected] said:
bricked my huawei Mate 8 NXT-L29 after flash plzz HELP :crying:
Click to expand...
Click to collapse
Follow instructions here: http://forum.xda-developers.com/mate-8/development/rayglobe-italian-knife-t3295526 you should be up and running after.
First check if u can enter into recovery with the vol-up+power combo
additional info would also be nice as to what exactly u did...
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
Hi all, I have a problem with my mate8 ... after I installed TWRP next rom (NXT-L29C432B170) can not just write anything in fastboot. I fastboot unlocked but not take any order. I can not do root. I can not flash custom recovery. I can not flash another rom. I can not change themes. Help me please.
I'm going through the same problem .. and I've tried all possible methods I found on internet but nothing worked for me ..
now my phone situation is:
I can maximum go to fastboot or Huawei eRecovery mode ..
on Fastboot:
I tried to use italian knife to; unbrick, install recovery but nothing worked ..
on Huawei eRecovery:
I connect with my wifi but after few searches or loading it give the error ..
I tried Huawei PC software it says I can't use system recovery ...
First I was able to go to TWRP recovery and there I tried different custom and stock roms to flash but after flash it was giving 'System is booting now....' and stays here and when I tried to resolved it, I lost my TWRP recovery too ... now I've nothing except fastboot and Huawei eRecovery ... can anybody please help us all ..?
muqaddas_dunyatv said:
I'm going through the same problem .. and I've tried all possible methods I found on internet but nothing worked for me ..
now my phone situation is:
I can maximum go to fastboot or Huawei eRecovery mode ..
on Fastboot:
I tried to use italian knife to; unbrick, install recovery but nothing worked ..
on Huawei eRecovery:
I connect with my wifi but after few searches or loading it give the error ..
I tried Huawei PC software it says I can't use system recovery ...
First I was able to go to TWRP recovery and there I tried different custom and stock roms to flash but after flash it was giving 'System is booting now....' and stays here and when I tried to resolved it, I lost my TWRP recovery too ... now I've nothing except fastboot and Huawei eRecovery ... can anybody please help us all ..?
Click to expand...
Click to collapse
Try the followings:
1) download the update.zip from: http://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727
2) Extract UPDATE.APP
3) Create a folder dload on a SD card and put it in the phone
4) Push the power+volume up+volume down at the same time
If it works the phone will run the UPDATE.APP and you will be back with the stock rom.
---------- Post added at 02:39 PM ---------- Previous post was at 02:36 PM ----------
muqaddas_dunyatv said:
I'm going through the same problem .. and I've tried all possible methods I found on internet but nothing worked for me ..
now my phone situation is:
I can maximum go to fastboot or Huawei eRecovery mode ..
on Fastboot:
I tried to use italian knife to; unbrick, install recovery but nothing worked ..
on Huawei eRecovery:
I connect with my wifi but after few searches or loading it give the error ..
I tried Huawei PC software it says I can't use system recovery ...
First I was able to go to TWRP recovery and there I tried different custom and stock roms to flash but after flash it was giving 'System is booting now....' and stays here and when I tried to resolved it, I lost my TWRP recovery too ... now I've nothing except fastboot and Huawei eRecovery ... can anybody please help us all ..?
Click to expand...
Click to collapse
In step 3 you need to put the UPDATE.APP in the dload folder.
[email protected] said:
Try the followings:
1) download the update.zip from: http://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727
2) Extract UPDATE.APP
3) Create a folder dload on a SD card and put it in the phone
4) Push the power+volume up+volume down at the same time
If it works the phone will run the UPDATE.APP and you will be back with the stock rom.
---------- Post added at 02:39 PM ---------- Previous post was at 02:36 PM ----------
In step 3 you need to put the UPDATE.APP in the dload folder.
Click to expand...
Click to collapse
I have try but still cannot done . I think I'm wrongly flash other version.
What can i do???
Raymondpop said:
I have try but still cannot done . I think I'm wrongly flash other version.
What can i do???
Click to expand...
Click to collapse
Try to dload the update.app from the rollback package from this website:
http://forum.xda-developers.com/mate-8/general/best-easiest-to-rollback-to-emui-4-0-t3507399
Try all three to see which one works for you. If the rollback update.app works then you can dload the update.app for the firmware you used before.
Delete pls.
im looking for the same thing and i still didnt find a solution. someone help plz!
I Downgrade from B320 to B180 and works,but Bootloader must be unlocked.I have a L29 C636 with B180 on it
Extract System.img,Cust.img,Recovery.img and Boot.img from B180 with Huawei Extractor
Copy the B180 on your SD Card in dload Folder
Flash all the img File via Fastboot.
Reboot and set it up.
Power off the Phone and press Volume+Volume- and Power Button at same time and wait until it is completely installed B180.
After this Procedur make a Factory Reset
This works for me
---------- Post added at 03:33 PM ---------- Previous post was at 03:29 PM ----------
maybe it works only if you B180 update.app over it install and Factory Reset,but I have not tried.
letschky said:
I Downgrade from B320 to B180 and works,but Bootloader must be unlocked.I have a L29 C636 with B180 on it
Extract System.img,Cust.img,Recovery.img and Boot.img from B180 with Huawei Extractor
Copy the B180 on your SD Card in dload Folder
Flash all the img File via Fastboot.
Reboot and set it up.
Power off the Phone and press Volume+Volume- and Power Button at same time and wait until it is completely installed B180.
After this Procedur make a Factory Reset
This works for me
---------- Post added at 03:33 PM ---------- Previous post was at 03:29 PM ----------
maybe it works only if you B180 update.app over it install and Factory Reset,but I have not tried.
Click to expand...
Click to collapse
its the same method that i did when i upgrade from B180 to B320 but it doesnt work for me when i want to downgrade, after flashing .img files i restart the phone stuck on "your device is booting now..." and i cant enter stock recovery. so to solve the prob i have to restart bootloader and flash twrp and go back to B320 i hate B3xx its so buggy, slow, apps crashing freezing, too much problems....) B180 was working perfect for me. btw i have a L29C652 no firmwares no updates.... my bootloader is unlocked i was using C900B180 and now C900B320.
then Flash the img files System,Boot,Cust and Recovery from B180 via fastboot,reboot and set up the Phone,power off and press the three buttons to flash the B180 update.app and Factory reset,this works for me without Problems.
Make you a Factory Reset after flash B320?Mine is not freezing or Buggy but the loction is total wrong.
or you can Flash the international B180 in Twrp,before flash this format system,data,,dalvik cache,cache and cust in twrp and flash B180 int.
Then reboot into Bootloader and flash Stockrecovery and Power off.Install update app B180 with the three buttons
letschky said:
then Flash the img files System,Boot,Cust and Recovery from B180 via fastboot,reboot and set up the Phone,power off and press the three buttons to flash the B180 update.app and Factory reset,this works for me without Problems.
Make you a Factory Reset after flash B320?Mine is not freezing or Buggy but the loction is total wrong.
or you can Flash the international B180 in Twrp,before flash this format system,data,,dalvik cache,cache and cust in twrp and flash B180 int.
Then reboot into Bootloader and flash Stockrecovery and Power off.Install update app B180 with the three buttons
Click to expand...
Click to collapse
thank you for your help finaly i did it !! i forget to flash stock firmware.zip on twrp before flashing .img files via fastboot now im on B180, i think in my opinion its the best version on Mate 8, and i hope that they can fix this EMUI its the worst android system
Hello, i have same problem. I download update.zip, extract via HuaweiUpdateExtractor, install all 4 .img. Then i restart phone and stuck at botloader. I try to install recovery via SRKToolHuawei but always stuck at waiting for devices. Fastboot work ok. I have put update.zip in dload folder in phone.
noodle123 said:
Hello, i have same problem. I download update.zip, extract via HuaweiUpdateExtractor, install all 4 .img. Then i restart phone and stuck at botloader. I try to install recovery via SRKToolHuawei but always stuck at waiting for devices. Fastboot work ok. I have put update.zip in dload folder in phone.
Click to expand...
Click to collapse
before flashing img files i flashed update.zip via twrp it will finish with error but it doesnt matter and then reboot bootloader and flash that 4 img files via fastboot and restart, after that the system will start correctly...
azyounes said:
before flashing img files i flashed update.zip via twrp it will finish with error but it doesnt matter and then reboot bootloader and flash that 4 img files via fastboot and restart, after that the system will start correctly...
Click to expand...
Click to collapse
Question,is your Bootloader Locked after downgrade to B180?
My Bootloader is Locked after downgrade to B180 and upgrade to B320,is no Problem i unlock again,but is strange,not Relocked rather “Locked“
letschky said:
Question,is your Bootloader Locked after downgrade to B180?
My Bootloader is Locked after downgrade to B180 and upgrade to B320,is no Problem i unlock again,but is strange,not Relocked rather “Locked“
Click to expand...
Click to collapse
no its always unlocked. i already update with same method to B320 and then downgrade to B180 there's no problem with bootloader.
Ok thanks for Answer
Where are the .img file?
I cant boot my mate 8 after i stupidly tried to debrand it flashing the images of firmware with fastboot. Now i can only boot in erecovery (but it doesnt download and recover the phone) and in fastboot mode, i really need your help guys. My phone model is NXT-L29C432 and firmware preflash B320
DLOAD METHOD WASNT WORKING BECAUSE OF A PROBLEM OF MY MICROSD, THREAD CAN BE CLOSED.
I finally got to twrp with an insecure boot.img, if someone can help me now, i dont know what to flash to make my phone work again
Download last ROM you were on and extract and put update.app in your Sd card root directory in dload folder (create one if you dont have). Insert SD card in phone, boot into software update mode and it will start updating automatically
---------- Post added at 12:58 PM ---------- Previous post was at 12:57 PM ----------
First lock your bootloader again....
Installation failed at 39%
any ideas? no one? also twrp doesnt work anymore, dload installation still fails at 39% (i used the file before the brick and it was working) and i cant restore via erecovery or hisuite
Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.
Flo.B said:
Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.
Click to expand...
Click to collapse
But please confirm , was the update from b120 to b316 successfull?
Sent from my KIW-L22 using Tapatalk
gopinaidu77 said:
But please confirm , was the update from b120 to b316 successfull?
Click to expand...
Click to collapse
I think it failed because the warning screen showed right?
Sent from my honor 5X using XDA Labs
adriansticoid said:
I think it failed because the warning screen showed right?
Click to expand...
Click to collapse
Right that was what I am also thinking bro.
---------- Post added at 01:35 PM ---------- Previous post was at 01:35 PM ----------
adriansticoid said:
I think it failed because the warning screen showed right?
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
So it's a failure . which mean that it is a semi flashed update . which doesn't installed update.app .
Extract update.app from ota and put it in dload folder .later flash it manually using dload method .
He should follow this way to overcome those reboots
Sent from my KIW-L22 using Tapatalk
---------- Post added at 01:36 PM ---------- Previous post was at 01:35 PM ----------
Flo.B said:
Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.
Click to expand...
Click to collapse
Consider reading my above post bro.
Sent from my KIW-L22 using Tapatalk
HONOR 8 Bricked
Hello ,
It happened on my FRD-L04, but I think is the same.
Bootloader is unlocked ?
1. Do you have all drivers installed ? OK
2.Do you have STOCK ROM ? OK. If not, use Huawei Firmare Finder to find suitable ROM. Be aware what you choose !!!
3. Unzipp (WinRar) the ROM.
4.Download and install Huawei Update Extractor. Run Huawei Update Extractor . Choose Update.app from the folder you unzipped the ROM.
5. Select cust.img , boot.img , recovery.img and system.img and extract them on a folder.
6.. Install MultiTool by Team (Multi Tool Team). The instalation will make a folder named UNBRICK.
7. Move the files extracted : cust.img , boot.img , recovery.img and system.img on the folder UNBRICK
8. Run MultiTool . Choose option 6 (unbrick) and after that choose option 2 ( if you already have files on folder UNBRICK)
9. Let the tool finish the job.
NOTE : You must have all drivers installed and the phone in FASTBOOT mode ( turn phone OFF - Press VOL- and insert USB cable simultaneously.)
Good luck !
Hi, thanks everyone for your reply.
Unfortunatly, the dload method seems not work. I think that to run this method, i need to press simultaneously vol+, vol- and the power button to run it, right ?
If it's like that, the method doesn't work anymore.
I will try the process given by technoguy09 and I said to you if it's ok !
So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?
Flo.B said:
So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?
Click to expand...
Click to collapse
Was the bootloader unlocked ?
Do u have twrp installed ?
Sent from my KIW-L22 using Tapatalk
---------- Post added at 03:53 PM ---------- Previous post was at 03:53 PM ----------
Flo.B said:
Hi, thanks everyone for your reply.
Unfortunatly, the dload method seems not work. I think that to run this method, i need to press simultaneously vol+, vol- and the power button to run it, right ?
If it's like that, the method doesn't work anymore.
I will try the process given by technoguy09 and I said to you if it's ok !
Click to expand...
Click to collapse
If u have twrp I will make a flashable zip of stock ROM and cust
Sent from my KIW-L22 using Tapatalk
The bootloader is unlock and TWRP was install but now I can't access it. I try to restore stock recovery and it's the same result.
Flo.B said:
The bootloader is unlock and TWRP was install but now I can't access it. I try to restore stock recovery and it's the same result.
Click to expand...
Click to collapse
Can fastboot detect your phone?
Yes, fastboot is detect, I can launch some command (fastboot devices display my phone, flash etc) everything work but flash recovery didn't change anything and flash system response an error (sparse flash write failure).
Flo.B said:
Yes, fastboot is detect, I can launch some command (fastboot devices display my phone, flash etc) everything work but flash recovery didn't change anything and flash system response an error (sparse flash write failure).
Click to expand...
Click to collapse
From what you said, looks like it is reallt bricked. Service center is your friend.
I think too... I hope that there will be no problem with service center because of the phone is unclocked !
I was never had this kind of problem with my previous android phone. I'm really bad ^^
Thanks for all everybody.
Flo.B said:
So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?
Click to expand...
Click to collapse
Try another ROM.
Flo.B said:
I think too... I hope that there will be no problem with service center because of the phone is unclocked !
I was never had this kind of problem with my previous android phone. I'm really bad ^^
Thanks for all everybody.
Click to expand...
Click to collapse
Goodluck with it buddy.
technoguy09 said:
Try another ROM.
Click to expand...
Click to collapse
I try at least 3 ROM download on different website. I don't think that it can change anything.
I had the same problem.
Dont worry, Honor 8 phones are nearly unbrickable.
Take your B120 ROM extract recovery, cust and boot partitions. (use huawei update extractor)
Flash Them via fastboot (adb) then force the dload method via the 3 buttons combo.
I had all the problems you described and restored my phone as new. (even the "sparse flash write failure" error)
Now i'm on EMUI 5 rooted, no problem
---------- Post added at 06:30 PM ---------- Previous post was at 06:25 PM ----------
Please refer this thread as it might help you.
http://forum.xda-developers.com/mate-8/general/fuss-debrick-restore-mate-8-t3457969
Have a little faith in your Honor
Flo.B said:
I try at least 3 ROM download on different website. I don't think that it can change anything.
Click to expand...
Click to collapse
Did you use Huawei Firmare Finder for your model ?
morpheus302 said:
I had the same problem.
Dont worry, Honor 8 phones are nearly unbrickable.
Take your B120 ROM extract recovery, cust and boot partitions. (use huawei update extractor)
Flash Them via fastboot (adb) then force the dload method via the 3 buttons combo.
I had all the problems you described and restored my phone as new. (even the "sparse flash write failure" error)
Now i'm on EMUI 5 rooted, no problem
---------- Post added at 06:30 PM ---------- Previous post was at 06:25 PM ----------
Please refer this thread as it might help you.
http://forum.xda-developers.com/mate-8/general/fuss-debrick-restore-mate-8-t3457969
Have a little faith in your Honor
Click to expand...
Click to collapse
I have extract all this img but the flash of cust won't work too so, the dload method can't be launch. Now, I send my phone to the service center yesterday. Wait and See ^^
technoguy09 said:
Did you use Huawei Firmare Finder for your model ?
Click to expand...
Click to collapse
Yes, I Download 2 ROM on it but same problem on both.
Flo.B said:
I have extract all this img but the flash of cust won't work too so, the dload method can't be launch. Now, I send my phone to the service center yesterday. Wait and See ^^
Yes, I Download 2 ROM on it but same problem on both.
Click to expand...
Click to collapse
Leave it for service centre people .they will take care
Sent from my KIW-L22 using Tapatalk
hi i just got a honor 6x and i have been following guides and at one point i had lineage os 13 on the phone but it would only boot to the password screen
so then i side loaded resurrection os 5.7 and it didnt have wifi so i tried upgrading emui and now i can't install any rom it just hangs at "patching ssytem unconditonally"
i have TWRP running on the phone. i just want to go back to stock OS. please help how do i do this?
unknown command [errno] update_huawei_pkg_from_ota_zip from zip failed
when i try to flash the stock huawei rom
i can run fastboot and twrp but nothing else works. i will paypal 15 dollars to someone who can help me
You can download the full firmware directly from honor, unzip it, and place the update.app file in a dload folder that you create on your sd card. Power of the phone then hold volume up, down, and power at the same time to initiate an automatic flash of the room you downloaded. This will erase everything, so be aware.
1.Download full rom from huawei support site then extract update.app
2.place it in dload folder using twrp (in twrp enable MTP)
3.Now extract the recovery.img from update.app using huawei extractor and flash it using fastboot flash recovery recovery.img
4.now power off phone then start phone holding Volume Up ,Volume Down & power button simultaneously
5.it will start updating
Rommco05 said:
Which is your model number and which twrp u have installed?
Click to expand...
Click to collapse
l24 and twrp-3.1.1-0-berlin.img
siddhrsh said:
1.Download full rom from huawei support site then extract update.app
2.place it in dload folder using twrp (in twrp enable MTP)
3.Now extract the recovery.img from update.app using huawei extractor and flash it using fastboot flash recovery recovery.img
4.now power off phone then start phone holding Volume Up ,Volume Down & power button simultaneously
5.it will start updating
Click to expand...
Click to collapse
I tried this method and it hangs on "your device is booting now..."
i also tried again after flashing system.img and boot.img from the huawei extractor. not sure what im doing wrong
do i have to flash anything else? i am on linux btw
juicyapply said:
I tried this method and it hangs on "your device is booting now..."
i also tried again after flashing system.img and boot.img from the huawei extractor. not sure what im doing wrong
do i have to flash anything else? i am on linux btw
Click to expand...
Click to collapse
flash recovery only after placing the update.app in dload folder
---------- Post added at 10:45 PM ---------- Previous post was at 10:44 PM ----------
juicyapply said:
I tried this method and it hangs on "your device is booting now..."
i also tried again after flashing system.img and boot.img from the huawei extractor. not sure what im doing wrong
do i have to flash anything else? i am on linux btw
Click to expand...
Click to collapse
flash recovery only after placing the update.app in dload folder then reboot your device using 3 button
Rommco05 said:
BLN-L24C567? If yes flash via twrp this two zips, after make reboot recovery in twrp. Should by now in stock recovery and here tap factory reset and after reboot. Now you will be hopefully in emui. Follow only if is correct your fw number which is mentioned here
http://update.hicloud.com:8180/TDS/...24_hw_usa/update_data_full_BLN-L24_hw_usa.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1279/g104/v82815/f1/full/update.zip
Click to expand...
Click to collapse
by flash, you mean press the top left install button?
Rommco05 said:
Yes, download them and put to sdcard or inter memory. Flash first region and after update zip
Click to expand...
Click to collapse
The region flashes sucessfully but update.zup fails on '32k crc check'
Rommco05 said:
Any news juicyapply ?
Click to expand...
Click to collapse
update_huawei_pkg_from_ota_zip: update pcakage from zip failed
updater process ended with ERROR: ?
Errror installinc zip file '/sdcard/update.zip'
3.1.0-2 is the twrp version
it just says your device is booting now forever
i put it on stock recovery, i can put it back on twrp though
juicyapply said:
i put it on stock recovery, i can put it back on twrp though
Click to expand...
Click to collapse
No, just do a reset in stock recovery.
venugopalu007 said:
No, just do a reset in stock recovery.
Click to expand...
Click to collapse
it doesn't boot to stock recovery, even when i hold down volume and power buttons
i got the recovery using the extractor using huawei
oh my god ok now it is stuck at blue honor screen for an hour after update installed automatically without pressing anything. i just pressed volume and power buttons and it started updating. no menu was provided
now it says your device failed verificitaion
so now the bootloader is locked again and the update installed, but it still doesn't boot and when i try to update again it says verification failed
juicyapply said:
now it says your device failed verificitaion
Click to expand...
Click to collapse
I had the same problem once.
You can try to flash the cust partition of your phone. The "device verification failed"-message should disappear then. It's not enough to only flash boot, system and recovery. If there is a problem with the cust partition of your phone you can also have problems with flashing stock roms via "dload"-method.
1. Download the right stock firmware via the huawei firmware finder. You usually have two .zip files (e.g. update.zip & update_full_BLN-L21_hw_eu.zip). The image file for the cust partition can be found in the update_full_BLN-L21_hw_eu.zip (choose the right one for your model).
2. Unpack update_full_BLN-L21_hw_eu.zip and extract the cust partition with the huawei firmware extractor.
3. Put your phone into fastboot mode
4. Use the following command: fastboot flash cust cust.img
5. Try to boot into your stock rom.