I wanted Secure Folder feature ever since I saw it in Note 7. But the Bummer is that you cant use it in Rooted Devices.
Today I found Secure folder Apk on APKMirror and tried getting it to work with Root.
Spent my whole day Downloading various ROMs and kernels and installing the secure folder APK (as some ROMs have included knox in their recent releases). But in every ROM I install the secure folder and Samsung Knox I get a warning "Failed to create Knox mode".
So I decided to give stock firmware a try and with the help of Superstock kernel got it working at last..
For those of u who want Secure folder, Knox, S-health, S-pay, Android pay, Banking apps support etc etc, follow these steps and Enjoy these stuffs in your Rooted S7E. Cheers
Currently none of the custom ROMs can run Secure folder fully even after having all knox status modifications.. So until its included and fully Functional in custom ROMs you can follow this guide.
Steps:
1. Download latest Nougat firmware from Sammobile(or any other website which u prefer)
2. Flash it with Odin.
3. Flash TWRP
3. Root it (The usual stuff - no-verity.zip and SuperSU.zip)
4. Flash Superstock Kernel
5. Flash all the MODs and stuff (to customize your phone- sound mods, camera mods etc etc)
6. Reboot.
7. Download MyKnox or any other app from Samsung store or Play store
8. Install Secure folder from here
Enjoy your new daily driver with latest security patch, mods and Knox,secure folder, SamsungPay...
Hit Thanks if u find it useful
EDIT: you can use TGP kernel with any custom ROMS to have secure folder working...
Just flash TGP kernel after flashing any ROM. U should be able to use all the above stuff
Credits:
Samsung - for the firmware
@Chainfire - for supersu
@Tkkg1994 - for Superstock Kernel
Any body try?
How about samsung pass?
What's the difference between secure folder and private mode? Can i create a secure folder in external SD card?
I'm using renovate ROM and I'm able to run secure folder. Even with root.
And does Samsung pay works for you ? Like are you able to add you card and make a purchase?
Finally someone did it thanks x 1000!
---------- Post added at 01:22 AM ---------- Previous post was at 01:06 AM ----------
Secure folder can't create knox mode.. And my knox FCs
I use Solid Explorer to create a secure encrypted folder. Works with the fingerprint sensor and you can create on your SDcard
I dont think Samsung Pay will work...it will get stuck somewhere down the line...either initializing or adding a card.
Use TGP kernel with any available stock custom ROMs. You will be able to run secure folder and knox.
I have tried the Samsung Pay but when I click on STARTS > I get Connection error: Unable to connect to Samsung Pay temporarily. Try again later.
Mmmh secure folder still not working, app is opening but after introduction stucks on "creating secure folder" for 1 minute, then the error "impossible to use knox mode" appears
---------- Post added at 08:29 AM ---------- Previous post was at 08:29 AM ----------
Also link for downloading secure folder is not working
Sprov said:
Mmmh secure folder still not working, app is opening but after introduction stucks on "creating secure folder" for 1 minute, then the error "impossible to use knox mode" appears
---------- Post added at 08:29 AM ---------- Previous post was at 08:29 AM ----------
Also link for downloading secure folder is not working
Click to expand...
Click to collapse
Well, I have no problems...
The link is working too.
Now Im using Superman ROM with TGP kernel. The method in this thread works too. It's upto you to choose from custom ROMs or modifying the stock ROM yourself. .
Don't use magisk.. If u do then hide magisk from knox apps properly..
Also Install phone info app and check if the knox counter is hidden..
I always use SuperSU systemless root method.. give it a try..
Get back here If u still can't use secure folder properly.
Dragneel96 said:
Well, I have no problems...
Click to expand...
Click to collapse
My Phone Info show Knox Warranty Void: 0x0
But cant get Samsung pay working.
Is Samsung pay working for you?
@Dragneel96 could this work for marshmallow too?
austibor said:
My Phone Info show Knox Warranty Void: 0x0
But cant get Samsung pay working.
Is Samsung pay working for you?
Click to expand...
Click to collapse
The app is working..
But my country doesn't have Spay yet.. so my bank isnt listed in that
Vivacity said:
@Dragneel96 could this work for marshmallow too?
Click to expand...
Click to collapse
Sorry bro.
Secure folder works only in Nougat
Sprov said:
Mmmh secure folder still not working, app is opening but after introduction stucks on "creating secure folder" for 1 minute, then the error "impossible to use knox mode" appears
---------- Post added at 08:29 AM ---------- Previous post was at 08:29 AM ----------
Also link for downloading secure folder is not working
Click to expand...
Click to collapse
I have the same problem
Tried with phh superuser, supersu, magisk - always same....
Hello i follow steps and i got secure folder working but now apearrs me this if I re root i can get a bootlop or secure folder stop working again?
Enviado desde mi SM-G935F mediante Tapatalk
Nicoga97 said:
Hello i follow steps and i got secure folder working but now apearrs me this if I re root i can get a bootlop or secure folder stop working again?
View attachment 4059140
Enviado desde mi SM-G935F mediante Tapatalk
Click to expand...
Click to collapse
Flash the kernel again ( Either TGP Kernel or Superstock Kernel. I'm using TGP though works well with secure folder).
Flash superSU after flashing kernel at the same time..
It will boot normally with root.
Dragneel96 said:
Well, I have no problems...
The link is working too.
Now Im using Superman ROM with TGP kernel. The method in this thread works too. It's upto you to choose from custom ROMs or modifying the stock ROM yourself. .
Don't use magisk.. If u do then hide magisk from knox apps properly..
Also Install phone info app and check if the knox counter is hidden..
I always use SuperSU systemless root method.. give it a try..
Get back here If u still can't use secure folder properly.
Click to expand...
Click to collapse
Tried with superman rom and tgp kernel and supersu.Secure folder still doesn't work.In superman rom do you have all knox stuff or just securefolder apk installed?
Dragneel96 said:
Well, I have no problems...
The link is working too.
Now Im using Superman ROM with TGP kernel. The method in this thread works too. It's upto you to choose from custom ROMs or modifying the stock ROM yourself. .
Don't use magisk.. If u do then hide magisk from knox apps properly..
Also Install phone info app and check if the knox counter is hidden..
I always use SuperSU systemless root method.. give it a try..
Get back here If u still can't use secure folder properly.
Click to expand...
Click to collapse
I'm using Superman Rom with Superstock kernel. My Knox counter is 0x1. How do I get it to be 0x0? I'm using magisk and using Magisk Hide I have checked Knox and SPay. But still can't get get My Knox or Spay to work.
Related
This is a modified version of @jrkruse stock BPB1 deodexed ROM with all(or most) of the stock BS removed.
INSTRUCTIONS:
I've included the links needed if you want to use xposed. If you chose not to use Xposed, then skip that step in the flashing process.
I have only used Safestrap to install this ROM, but FlashFire should work as well.
1) Flash NO_BS_BPB1_ROM_DEODEXED.zip
2) Flash Extra_toggles.zip
3) Flash xposed-v75-sdk21-arm-arter97-snapdragon.zip
4) Flash Lollipop_Safestrap_Reboot_Extended_PM_PB1.zip
5) Flash BPB1_Firmware_No_Bootloaders.zip
6) After first boot, open Lollipop Recovery Control and install the latest Safestrap.
7) Open up Viper4Android and install the driver. Then install Viper Fix 1.1.apk and run the Viper fix in the app.
There is no need to flash any Viper zips with this ROM. This ROM has all the same apps as BOK3 V5, but obviously updated to the BPB1 apps. The only app added is multiwindow. I don't use multiwindow, so I can be certain that all aspects of it work, but everything seemed to work normally when I played with it.
Note: Don't pay attention to the 1- prefix in front of some of the ROM versions. I prefix all my flashables in my ROM folder with a 1-, 2-, 3-, ect, so that I have them all in order when I flash them instead of having to remember the order every time lol. I forgot to remove those prefixes when I uploaded the ROMs.
reserved
reserved1
Can this be dirty flashed over your bs free bok3?
Sent from my SM-G900V using Tapatalk
---------- Post added at 05:14 PM ---------- Previous post was at 04:53 PM ----------
Just dirty flashed. All is good so far. Thank you
Sent from my SM-G900V using Tapatalk
I've downloaded it multiple times from multiple mirrors, I keep getting 6619258FCFF93587050F9E15B2FFBAA9 as the md5 not
a1d8316898d604314b884dafb09298b0 that is listed for 1-NO_BS_BPB1_ROM_DEODEXED.zip on the download page. I'll give it a try anyway since I can always reflash my NCG stock.
Edit:
It works! But now I have 492 errors anytime I want to download something from google play? Anyone else with this issue?
renthispace said:
I've downloaded it multiple times from multiple mirrors, I keep getting 6619258FCFF93587050F9E15B2FFBAA9 as the md5 not
a1d8316898d604314b884dafb09298b0 that is listed for 1-NO_BS_BPB1_ROM_DEODEXED.zip on the download page. I'll give it a try anyway since I can always reflash my NCG stock.
Click to expand...
Click to collapse
Does anyone know what exactly is new/improved in this BPB1? I feel like these versions keep getting released, but I have no idea what is actually improved LOL.
Thanks! Seems to be working well. Google Calendar kept force closing, so I removed it and installed the Play Store version.
Some apps seen to have a touch recognition problem, like titanium backup. Haven't had any FC errors.
renthispace said:
Edit:
It works! But now I have 492 errors anytime I want to download something from google play? Anyone else with this issue?
Click to expand...
Click to collapse
twelvevyan said:
Some apps seen to have a touch recognition problem, like titanium backup. Haven't had any FC errors.
Click to expand...
Click to collapse
I don't have any of these problems on mine. Does anybody else? It sounds like you guys might have some bad data from a previous ROM. The Play Store was updated in this ROM, so clear data for the Play Store, and that might fix the problem.
Stupifier said:
Does anyone know what exactly is new/improved in this BPB1? I feel like these versions keep getting released, but I have no idea what is actually improved LOL.
Click to expand...
Click to collapse
It is just security patches in this ROM. I haven't found anything really new.
btonetbone said:
Thanks! Seems to be working well. Google Calendar kept force closing, so I removed it and installed the Play Store version.
Click to expand...
Click to collapse
I wouldn't expect Google Calendar to work, because it's not in the ROM lol.
Few Questions
First, since I'm pretty new to flashing ROMs with SafeStrap...
At each step of your process when you say "Flash" does that mean Safestrap-> Boot to Recovery ->Install Zip ???
I'm looking at needing Xposed in order to bypass my company's Exchange security requirement of encrypting my device in order to allow email access.
I got a little confused with all the Xposed documentation out there.
Does this set of instructions get me to where I can load the Xposed module to bypass that security and then continue from there?
Big Thanks for your help.
I'm going to start a backup of current ROM so I'll be ready to install this soon.
Regards,
NerdyKowboy
NerdyKowboy said:
First, since I'm pretty new to flashing ROMs with SafeStrap...
At each step of your process when you say "Flash" does that mean Safestrap-> Boot to Recovery ->Install Zip ???
I'm looking at needing Xposed in order to bypass my company's Exchange security requirement of encrypting my device in order to allow email access.
I got a little confused with all the Xposed documentation out there.
Does this set of instructions get me to where I can load the Xposed module to bypass that security and then continue from there?
Click to expand...
Click to collapse
Yes, flash means install in Safestrap.
If you flash the Xposed zip I linked in the original post, then you can use modules in the Xposed installer app included in the ROM.
CVertigo1 said:
This is a modified version of @jrkruse stock BPB1 deodexed ROM with all(or most) of the stock BS removed.
INSTRUCTIONS:
I've included the links needed if you want to use xposed. If you chose not to use Xposed, then skip that step in the flashing process.
I have only used Safestrap to install this ROM, but FlashFire should work as well.
1) Flash NO_BS_BPB1_ROM_DEODEXED.zip
2) Flash Extra_toggles.zip
3) Flash xposed-v75-sdk21-arm-arter97-snapdragon.zip
4) Flash Lollipop_Safestrap_Reboot_Extended_PM_PB1.zip
5) Flash BPB1_Firmware_No_Bootloaders.zip
6) After first boot, open Lollipop Recovery Control and install the latest Safestrap.
7) Open up Viper4Android and install the driver. Then install Viper Fix 1.1.apk and run the Viper fix in the app.
There is no need to flash any Viper zips with this ROM. This ROM has all the same apps as BOK3 V5, but obviously updated to the BPB1 apps. The only app added is multiwindow. I don't use multiwindow, so I can be certain that all aspects of it work, but everything seemed to work normally when I played with it.
Note: Don't pay attention to the 1- prefix in front of some of the ROM versions. I prefix all my flashables in my ROM folder with a 1-, 2-, 3-, ect, so that I have them all in order when I flash them instead of having to remember the order every time lol. I forgot to remove those prefixes when I uploaded the ROMs.
Click to expand...
Click to collapse
1.) In safestrap, just do wipe->factory reset or is more of a wipe required?
2.) Can I flash them all using the Zip Queue in Safestrap (TWRP 2.7.1.0) or should I do them one at a time?
Factory reset in factory recovery. You can install all of them on one queue.
CVertigo1 said:
Factory reset in factory recovery. You can install all of them on one queue.
Click to expand...
Click to collapse
I did that, and this is AWESOME. Love the ROM. Tough to decide between the two launchers. Haven't had this level of control in a while.
Only snag was that Android Pay doesn't recognize the device as Android authentic, so can't use Android Pay (which I almost never used anyway).
Thanks for all the work @CVertigo1
NerdyKowboy said:
Only snag was that Android Pay doesn't recognize the device as Android authentic, so can't use Android Pay (which I almost never used anyway).
Thanks for all the work @CVertigo1
Click to expand...
Click to collapse
I believe Android Pay doesn't work sheerly because the device is rooted, not because of the ROM itself.
Can't get snapchat to login with Xposed. I've read the solution is to do an Xposed framework uninstall, login to Snap, then reinstall Xposed, but have found a lot of people get hung in a bootloop when uninstalling.
Is this from using the wrong uninstaller or something else?
Which uninstaller is correct?
Do you have another solution?
I have tried removing the modules and doing a reboot to see if that'd be adequate.
EDIT:
The issue was the xposed framework.
To anyone else doing this on Galaxy S5 with this ROM (or same version of Xposed)
1.) uninstall Snapchat
2.) Deactivate modules from Xposed
3.) Download and Flash "xposed-uninstaller-arter97.zip" from this post: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
4.) Reboot and wait for all the apps to Optimize
5.) Reinstall snapchat and login
6.) Flash the same Xposed framework in original post of this thread (apps will re-optimize)
Is there a way to disable the high volume warning? I can't believe they now also have it on Bluetooth...
renthispace said:
Is there a way to disable the high volume warning? I can't believe they now also have it on Bluetooth...
Click to expand...
Click to collapse
Since Xposed is already in the ROM, inside of Xposed, go to Downloads & download the module "NoSafeVolumeWarning". Enable it and reboot.
Boom. No more volume warning.
NerdyKowboy said:
Can't get snapchat to login with Xposed. I've read the solution is to do an Xposed framework uninstall, login to Snap, then reinstall Xposed, but have found a lot of people get hung in a bootloop when uninstalling.
Is this from using the wrong uninstaller or something else?
Which uninstaller is correct?
Do you have another solution?
I have tried removing the modules and doing a reboot to see if that'd be adequate.
EDIT:
The issue was the xposed framework.
To anyone else doing this on Galaxy S5 with this ROM (or same version of Xposed)
1.) uninstall Snapchat
2.) Deactivate modules from Xposed
3.) Download and Flash "xposed-uninstaller-arter97.zip" from this post: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
4.) Reboot and wait for all the apps to Optimize
5.) Reinstall snapchat and login
6.) Flash the same Xposed framework in original post of this thread (apps will re-optimize)
Click to expand...
Click to collapse
So were you able to uninstall Xposed? I see your edit of "fixed issue" but in case you didn't or having issues I posted this in another thread.
http://forum.xda-developers.com/showpost.php?p=65635081&postcount=18
al50 said:
So were you able to uninstall Xposed? I see your edit of "fixed issue" but in case you didn't or having issues I posted this in another thread.
http://forum.xda-developers.com/showpost.php?p=65635081&postcount=18
Click to expand...
Click to collapse
Yes, that fixed the issue.
Successfully uninstalled Xposed, Reinstalled SnapChat and logged in without issue. Then, reflashed the Xposed framework.
So easy, but I was so nervous doing it after seeing many, many people talking about getting hung in a bootloop.
As some of you will know, Samsung have no longer allowed S-Health to work on devices where Knox has been tripped.
This guide will show you how to get the latest version of S-Health to run without this block
Rooted Devices
This method requires you to be rooted. You can always unroot after doing this
If you are not rooted you can root your device by following the instructions below:
Download TWRP and save it somewhere you will remember.
Open ODIN and press AP then select the TWRP file you just downloaded.
Put your phone into Download Mode by holding Power + Volume Down + Home.
Connect your phone to your computer using a USB cable. Then Press Start in ODIN.
Download SuperSU-v2.79-SR3 and save it to your phone's SD Card.
Power off the phone and then hold Power + Volume Up + Home to boot to TWRP.
Press Install and locate the SuperSU file you downloaded earlier. Select it and Install.
You are now rooted.
To remove root, simple open the SuperSU app from your app drawer, go to settings and select Full Unroot
Follow the steps below to remove the S-Health block.
Download a root file explorer (such as Root Explorer, Root Browser or ES File Explorer).
Open the root file explorer and go to the /system folder.
Open the file named build.prop in text editor
In the build.prop file look for ro.config.tima=1
Change this line to ro.config.tima=0, simply changing the 1 to a 0
Reboor phone
Run the S-Health app
Non-Rooted Devices
If you are not rooted and/or cannot root then you can follow the steps below to get S-Health working (this will only work if the app is not installed as a system app).
Uninstall the S-Health App (if you cannot uninstall the app, this means it is installed to the system partition. Try Method 2 below).
Install version 4 of the S-Health app which can be found HERE
Open the app and complete setup
Update the S-Health app via the app store
You should now be able to use the S-Health app without issue
You can now use S-Health even with tripped Knox!!
{Mod edit: Download links via a suspicious URL has been removed}
Cannot download your S Health 4.8.1. Clicking the link asks me to log in to Facebook but, when I do, I get Sorry, your request could not be processed. Please try again. Can you upload it somewhere else?
Wonderful! It worked!
Hi
I update to nougat today an checked if i can use s health abd i didn't notice any problem.......no Error....i can use it normally as i use to do....keep in mind that I already've lost the knox waranty and it tells me that i got the latest version of s health
norm2002 said:
Cannot download your S Health 4.8.1. Clicking the link asks me to log in to Facebook but, when I do, I get Sorry, your request could not be processed. Please try again. Can you upload it somewhere else?
Click to expand...
Click to collapse
Apologies. I have updated the link in the OP.
Hammoud Abbas said:
Hi
I update to nougat today an checked if i can use s health abd i didn't notice any problem.......no Error....i can use it normally as i use to do....keep in mind that I already've lost the knox waranty and it tells me that i got the latest version of s health
Click to expand...
Click to collapse
Ye some people don't seem to be locked out. I've no idea why.
CuBz90 said:
Apologies. I have updated the link in the OP.
Ye some people don't seem to be locked out. I've no idea why.
Click to expand...
Click to collapse
thank God then
My S health version is 5.4.1.0003. Working perfectly on Nougat. And have never had an issue with s health before.
Sent from my SM-G935F using XDA-Developers Legacy app
Shidapu said:
My S health version is 5.4.1.0003. Working perfectly on Nougat. And have never had an issue with s health before.
Sent from my SM-G935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Like I said, it works fine for some. This is for those that cannot access it.
Shidapu said:
My S health version is 5.4.1.0003. Working perfectly on Nougat. And have never had an issue with s health before.
Sent from my SM-G935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Also here works perfectly with knox 0x1
ManDone.vRs said:
Also here works perfectly with knox 0x1
Click to expand...
Click to collapse
yes, but if u ever do a factory reset will not work anymore...with knox 0x1
Anyone having problem on step 11?
I cant install the app, giving me "there a problem pardon the package"
I have "unknown source selected", and I have downloaded 3 other times the app to make sure there was no problem...
Can someone help me, m
Thank
frumy said:
yes, but if u ever do a factory reset will not work anymore...with knox 0x1
Click to expand...
Click to collapse
i made it twices to test the latest build nougat , is the same , every day in gym i use SHealth... is ok .
mar_wu said:
Anyone having problem on step 11?
I cant install the app, giving me "there a problem pardon the package"
I have "unknown source selected", and I have downloaded 3 other times the app to make sure there was no problem...
Can someone help me, m
Thank
Click to expand...
Click to collapse
Have you enabled "Allow installation of apps from Unknown Sources"?
Have you tried re-downloading the app? It may have corrupt whilst downloading.
CuBz90 said:
Have you enabled "Allow installation of apps from Unknown Sources"?
Have you tried re-downloading the app? It may have corrupt whilst downloading.
Click to expand...
Click to collapse
Thanks for the reply...
Yes set for installation from unknown sources...
Yesterday after many hours of playing... I remembered about permission setting...
So I set to
RW
R
R
Restarted, and boom. Done!
Thanks, works great, now I have S health. Again
I have 5.4.1
CuBz90 said:
As some of you will know, Samsung have no longer allowed S-Health to work on devices where Knox has been tripped.
This guide will show you how to get the latest version of S-Health to run without this block
This method requires you to be rooted. You can always unroot after doing this
You can now use S-Health even with tripped Knox!!
Click to expand...
Click to collapse
Cool mate !!
Working
Should we have the device rooted? true? The only one nougat rom i have is a stock no rooted. No way to install Shealth from system/app because I´m don´t have root permissions on this folder
and how do root the device on nougat? I read in different threads that currently rooting the device leads to broken wifi and brightness-adjustment.
Can somebody provide us with a proper root guide or does a simple unroot fix these problems after installing S-Health???
deliyan said:
Should we have the device rooted? true? The only one nougat rom i have is a stock no rooted. No way to install Shealth from system/app because I´m don´t have root permissions on this folder
Click to expand...
Click to collapse
sirhC6 said:
and how do root the device on nougat? I read in different threads that currently rooting the device leads to broken wifi and brightness-adjustment.
Can somebody provide us with a proper root guide or does a simple unroot fix these problems after installing S-Health???
Click to expand...
Click to collapse
Flash TWRP in ODIN.
Then boot to TWRP and flash SuperSU-v2.79-SR3
To unroot, open the SuperSU app and select 'Full unroot'. S-health will still work as normal.
I use this root method and it works without causing any issues to the functionality of my phone.
CuBz90 said:
Flash TWRP in ODIN.
Then boot to TWRP and flash SuperSU-v2.79-SR3
To unroot, open the SuperSU app and select 'Full unroot'. S-health will still work as normal.
I use this root method and it works without causing any issues to the functionality of my phone.
Click to expand...
Click to collapse
Shealth working with your tip.thanks
Tried and tested on march/may security update and works
PLEASE HIT THE LIKE BUTTONS IF IT WORKS (WHICH IT DOES).
1. This first step was originally found by @deathdefiler and thought it might help people so I've presented a neat manual to get started spoofing.
You need to root your phone
dont matter if you use a autoroot oneclickroot or what ever you prefer
Because we will be deleting (or NOT as mentioned in step 2) root later.
Just make sure SuperSu(optional for cm/lineage users) and busybox is installed
after your phone is rooted and
busybox: https://play.google.com/store/apps/details?id=stericson.busybox
are installed
go to playstore and download this exactly
(GPS Joystick Fake GPS Location)
https://play.google.com/store/apps/details?id=com.theappninjas.gpsjoystick
by dev. The app ninjas
as while youre in playstore also download (/system/app mover Root) by dev. j4velin
https://play.google.com/store/apps/details?id=de.j4velin.systemappmover
now openup /system/app mover and search for fake gps joystick
tap it and choose yes or ok to move it to /system/app
At this point you should reboot your phone( MUST DO )!
Once your phone is rebooted you can unroot your phone
Even if you unroot Gps joystick will remain in /system/app
Now go into your phone location settings
Set location modus to Device only
I also set google location service off otherwise it will go back to high accuracy mode.
Now we can open Fake gps joystick and go to settings from menu in the top left corner
Make sure that these following options are on
". Enable System Mode
Disable Location Service
Enable A-GPS reset. "
Now Restart your device for changes to take effect
thats it now we can start fake gps choose location of your liking
open pokenmon go and start playing (make sure loction is on device only mode)
If you want your location to work back normal
for example playing pokemon go normal or use googlemaps
then open fake gps settings and make sure Disable location service is set to off
Reboot your device and your good to go
Note by @reis1996 : In settings menu change "Background Handler" to another value from default to remove the time lag between spoofs. It varies for different devices
DONATE IF I WAS HELPFUL
HERE
Optional step for users who want to keep root/run custom ROMs
NOTE: YOU HAVE TO HAVE A CM/LINEAGE BASED ROM FOR THIS STEP TO WORK
NO MAGISK!!! OR SUPERSU!!!
2. The next step is to temporarily disabled root but still have root access
*****NOUGAT USERS DON'T FLASH ANYTHING*****
Pokemon checks for root status and SELinux status
iSU is an app made @bhb27
Head over to the iSU thread and flash (for 6.0.1 and below as nougat just needs the app installed)
a)iSU kernal file. permissive if your selinux is already permissive / enforcing if your selinux is enforcing
You can check your seLinux status of your phone in settings>about phone.
https://forum.xda-developers.com/an...le-app-to-deactivate-activate-t3478348/page56
b)use the iSU app
To change your build.prop file of your phone
This makes the phone think its not rooted
In the prop editor in the app, set all values to green/safe.
Next set root deactivated and seLinux to enforcing.
The app has an inbuilt safety net checker to see if you pass safety net.
Note that you should toggle root and selinux status to pass safety net via the iSU app only.
as soon as i move gps fake location app to system it disappears, and i have no means to open it up. i did cf autoroot.
also i have galaxy s6, where do i find settings below.
Now go into your phone location settings
Set location modus to Device only
I also set google location service off
zayf said:
as soon as i move gps fake location app to system it disappears, and i have no means to open it up. i did cf autoroot.
also i have galaxy s6, where do i find settings below.
Now go into your phone location settings
Set location modus to Device only
I also set google location service off
Click to expand...
Click to collapse
Did you restart the phone after making the GPS a system app. RESTART IS A MUST AFTER MAKING ANY APP SYSTEM APP
OK a little more information would be nice. What ROM are you running? Android version? Stock?
My advice for now would be to use a system APP uninstaller and remove the app. Then use another app ( various apps are present in play store) to make the GPS app a system app. Then unroot
hi man i did everything u said and works perfect,i have motorola x force, LineageOS with root from magisk and android 7.1.
nyw said:
hi man i did everything u said and works perfect,i have motorola x force, LineageOS with root from magisk and android 7.1.
Click to expand...
Click to collapse
Did you remove root after making fake gps system? Magisk that is
Ky$h said:
Did you remove root after making fake gps system? Magisk that is
Click to expand...
Click to collapse
No,i actualy want root thats why i unlocked the bootloader in the first place.
Ky$h said:
Did you remove root after making fake gps system? Magisk that is
Click to expand...
Click to collapse
As mentioned in my second step use the iSU app
No root , no soft ban, 5.0-7.xx: https://forum.xda-developers.com/ap...-mock-root-t3623235/post72708198#post72708198
reis1996 said:
Tried and tested on march/may security update and works
PLEASE HIT THE LIKE BUTTONS IF IT WORKS (WHICH IT DOES).
1. This first step was originally found by @deathdefiler and thought it might help people so I've presented a neat manual to get started spoofing.
You need to root your phone
dont matter if you use a autoroot oneclickroot or what ever you prefer
Because we will be deleting (or NOT as mentioned in step 2) root later.
Just make sure SuperSu(optional for cm/lineage users) and busybox is installed
after your phone is rooted and
busybox: https://play.google.com/store/apps/details?id=stericson.busybox
are installed
go to playstore and download this exactly
(GPS Joystick Fake GPS Location)
https://play.google.com/store/apps/details?id=com.theappninjas.gpsjoystick
by dev. The app ninjas
as while youre in playstore also download (/system/app mover Root) by dev. j4velin
https://play.google.com/store/apps/details?id=de.j4velin.systemappmover
now openup /system/app mover and search for fake gps joystick
tap it and choose yes or ok to move it to /system/app
At this point you should reboot your phone( MUST DO )!
Once your phone is rebooted you can unroot your phone
Even if you unroot Gps joystick will remain in /system/app
Now go into your phone location settings
Set location modus to Device only
I also set google location service off otherwise it will go back to high accuracy mode.
Now we can open Fake gps joystick and go to settings from menu in the top left corner
Make sure that these following options are on
". Enable System Mode
Disable Location Service
Enable A-GPS reset. "
Now Restart your device for changes to take effect
thats it now we can start fake gps choose location of your liking
open pokenmon go and start playing (make sure loction is on device only mode)
If you want your location to work back normal
for example playing pokemon go normal or use googlemaps
then open fake gps settings and make sure Disable location service is set to off
Reboot your device and your good to go
Note by @reis1996 : In settings menu change "Background Handler" to another value from default to remove the time lag between spoofs. It varies for different devices
DONATE IF I WAS HELPFUL
HERE
Click to expand...
Click to collapse
I flashed lineage custom rom unrooted
But pokemon go still detects my root
And said game is not compatible with rom
What is the solution??
Sent from my H30-U10 using Tapatalk
MadMax0067 said:
I flashed lineage custom rom unrooted
But pokemon go still detects my root
And said game is not compatible with rom
What is the solution??
Click to expand...
Click to collapse
Please read my instructions carefully without asking doubts. You have to use an app called iSU. Link in the second post
reis1996 said:
Please read my instructions carefully without asking doubts. You have to use an app called iSU. Link in the second post
Click to expand...
Click to collapse
ISU is not supported by my ROM
Sent from my H30-U10 using Tapatalk
---------- Post added at 11:45 AM ---------- Previous post was at 11:43 AM ----------
ISU is not supported by my ROM
Sent from my H30-U10 using Tapatalk
I install as system app, reboot, but when i unroot, the app doesn't appear on screen but i checked to see if it's still in system/app and it is. If I root back, the app does appear on screen as system app.
Huawei P10 Stock ROM, Nougat 7.0
MusicHeat said:
I install as system app, reboot, but when i unroot, the app doesn't appear on screen but i checked to see if it's still in system/app and it is. If I root back, the app does appear on screen as system app.
Huawei P10 Stock ROM, Nougat 7.0
Click to expand...
Click to collapse
Does iSU work on your ROM? You won't need to remove root if you are using a Nougat ROM
MadMax0067 said:
I flashed lineage custom rom unrooted
But pokemon go still detects my root
And said game is not compatible with rom
What is the solution??
Click to expand...
Click to collapse
Have you installed busybox?
If you are using a custom ROM like lineage your build.prop values have to be changed.
MadMax0067 said:
ISU is not supported by my ROM
Sent from my H30-U10 using Tapatalk
---------- Post added at 11:45 AM ---------- Previous post was at 11:43 AM ----------
ISU is not supported by my ROM
Click to expand...
Click to collapse
You need to download an app to edit your build.prop file and you will need root for this.
3ctoolbox can edit the build.prop but you can use anything else.
Trying using the iSU app to just change the values only. Its a one click method by clicking the safe (green) button under props menu
reis1996 said:
Have you installed busybox?
If you are using a custom ROM like lineage your build.prop values have to be changed.
Click to expand...
Click to collapse
Have installed busybox
But what to change??
Sent from my H30-U10 using Tapatalk
---------- Post added at 05:09 PM ---------- Previous post was at 05:08 PM ----------
reis1996 said:
You need to download an app to edit your build.prop file and you will need root for this.
3ctoolbox can edit the build.prop but you can use anything else.
Trying using the iSU app to just change the values only. Its a one click method by clicking the safe (green) button under props menu
Click to expand...
Click to collapse
Sent from my H30-U10 using Tapatalk
reis1996 said:
Does iSU work on your ROM? You won't need to remove root if you are using a Nougat ROM
Click to expand...
Click to collapse
So you are saying that iSu can hide root from SN?
MadMax0067 said:
Have installed busybox
But what to change??
Click to expand...
Click to collapse
You need to make a clean flash again. Wipe data. Dalvik cache (not internal) flash ROM again.
DO NOT INSTALL BUSYBOX
MusicHeat said:
So you are saying that iSu can hide root from SN?
Click to expand...
Click to collapse
Yes. If you are on nougat just install the app and don't flash anything. You will then have to toggle root and selinux status through that app only
So, I've been toying around with this idea of getting a spoofing app into the system files without root and I finally did it!
Do not set as mock app, if it works you just need the settings below for GPS joystick. If you enabled mock app as GPS joystick you will rubberband (jump location).
Flash v2
Update in playstore
Setup settings below
Version 2: Click here (link fixed)
Pokemaps:
Singapore Pokémon and raid map
Philly Pokémon and Raid map
Pokémon and gym finder
This method requires TWRP recovery
Once install check to see if you are tripping safetynet (playstore checkers)
If so, just keep your stock recovery handly to flash in odin.
If not, well then you don't have to worried about changing back to stock (means you can flash this and other mods without tripping safetynet, such as bootanimations)
First download file and place on your phone
Next reboot into recovery and flash file
reboot
Next, (if needed) flash your stock recovery so you don't trip safeynet anymore.
Now, Open GPS Joystick
Click menu button and click settings
Turn on the following:
Enable Indirect Mocking
Enable System Mode
*Must Enable this option* Disable Location (Will need to disable and reboot if you need Maps or other gps app, but can enable and reboot to lock your spoofing location anytime)
Finally, after you turn all of those on reboot and open app and set location.
No jumping
No soft bans (unless you jump from new york to singapore in under 2.5 hours)
Full spoofing with no root needed!
Tested on Sprint s6 edge plus running Nougat.
All Sprint Samsung devices s5 and up should 100% work with this.
Screen Shots:
Screenshot 1
Screenshot 2
Screenshot 3
Screenshot 4
Download Links version 1:
Server 1
Server 2
Server 3
Dbzfan said:
So, I've been toying around with this idea of getting a spoofing app into the system files without root and I finally did it!
This method requires TWRP recovery
Once install check to see if you are tripping safetynet (playstore checkers)
If so, just keep your stock recovery handly to flash in odin.
If not, well then you don't have to worried about changing back to stock (means you can flash this and other mods without tripping safetynet, such as bootanimations)
First download file and place on your phone
Next reboot into recovery and flash file
reboot
Next, (if needed) flash your stock recovery so you don't trip safeynet anymore.
Now, Open GPS Joystick
Click menu button and click settings
Turn on the following:
Enable Indirect Mocking
Enable System Mode
*Must Enable this option* Disable Location (Will need to disable and reboot if you need Maps or other gps app, but can enable and reboot to lock your spoofing location anytime)
Finally, after you turn all of those on reboot and open app and set location.
No jumping
No soft bans (unless you jump from new york to singapore in under 2.5 hours)
Full spoofing with no root needed!
Download Links:
Server 1
Server 2
Server 3
Server 4
Server 5
Click to expand...
Click to collapse
Can work on custom roms??
Sent from my H30-U10 using Tapatalk
What does this have to do with Magisk?
MadMax0067 said:
Can work on custom roms??
If pokemon go does detect your rom /root, yes!
If your rom does have root, yes
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
Didgeridoohan said:
What does this have to do with Magisk?
Click to expand...
Click to collapse
I figured a lot of people are using magisk root to bypass the root check for pokemon go and this will work with out the need to be rooted.
Dbzfan said:
I figured a lot of people are using magisk root to bypass the root check for pokemon go and this will work with out the need to be rooted.
Click to expand...
Click to collapse
My rom is unrooted
Shoud i root it first
Sent from my H30-U10 using Tapatalk
A video tutorial would be great!
MadMax0067 said:
My rom is unrooted
Shoud i root it first
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
No, you just need to flash twrp as your recovery and flash zip, then just turn on those settings above, that's it. Your location will be locked anywhere you set it with no jumping at all. If your jumping you need to reboot after you turn on those settings. Pretty much with root you would move it to system but since safetynet is in place and blocks most root this will place the file in system from recovery with no root needed.
Dbzfan said:
No, you just need to flash twrp as your recovery and flash zip, then just turn on those settings above, that's it. Your location will be locked anywhere you set it with no jumping at all. If your jumping you need to reboot after you turn on those settings.
Click to expand...
Click to collapse
Lets hope it works
M really wanna play Pokemon go bt no poke desk at my place yet
Sent from my H30-U10 using Tapatalk
Dbzfan said:
So, I've been toying around with this idea of getting a spoofing app into the system files without root and I finally did it!
This method requires TWRP recovery
Once install check to see if you are tripping safetynet (playstore checkers)
If so, just keep your stock recovery handly to flash in odin.
If not, well then you don't have to worried about changing back to stock (means you can flash this and other mods without tripping safetynet, such as bootanimations)
First download file and place on your phone
Next reboot into recovery and flash file
reboot
Next, (if needed) flash your stock recovery so you don't trip safeynet anymore.
Now, Open GPS Joystick
Click menu button and click settings
Turn on the following:
Enable Indirect Mocking
Enable System Mode
*Must Enable this option* Disable Location (Will need to disable and reboot if you need Maps or other gps app, but can enable and reboot to lock your spoofing location anytime)
Finally, after you turn all of those on reboot and open app and set location.
No jumping
No soft bans (unless you jump from new york to singapore in under 2.5 hours)
Full spoofing with no root needed!
Download Links:
Server 1
Server 2
Server 3
Click to expand...
Click to collapse
Couldn't you just download the app from the Play Store? It's even a newer version...
https://play.google.com/store/apps/details?id=com.theappninjas.gpsjoystick&hl=en
Just to say this is working 100% on ViperOS 1.1 (7.1.2) on my Athene. Aka Moto G4 plus.. thanks!!
Is there any solution??
My custom rom is not rooted but game says your rom is not compatible...
Sent from my H30-U10 using Tapatalk
MadMax0067 said:
Is there any solution??
My custom rom is not rooted but game says your rom is not compatible...
Click to expand...
Click to collapse
What ROM?
ldiomedi said:
What ROM?
Click to expand...
Click to collapse
Lineage marshmallow
Sent from my H30-U10 using Tapatalk
MadMax0067 said:
Lineage marshmallow
Click to expand...
Click to collapse
Lineage it's pre rooted. You can enable or disable root in dev options. If you didn't remove the su binary from the system, then pogo will detect it.
ldiomedi said:
Lineage it's pre rooted. You can enable or disable root in dev options. If you didn't remove the su binary from the system, then pogo will detect it.
Click to expand...
Click to collapse
I have removed it before flashing it
But it still detects
Is there any other option to remove su binary??
Sent from my H30-U10 using Tapatalk
iSu
I'm guessing that after flashing the file it should appear without installing it from play store.For me it doenst install automatically after flashing.
One thing I noticed when trying to flash it on a Galaxy S7 with Android 6.0.1, is that it didn't like the app being put in priv-app
I recommend putting it in /system/app where it does work.
djb77 said:
One thing I noticed when trying to flash it on a Galaxy S7 with 6.0.1, is that it didn't like the app being put in priv-app
I recommend putting it in /system/app where it does work.
Click to expand...
Click to collapse
I checked through TWRP file manager to see if it installed in priv-app so i copied it(not moved) from there to /system/app but still doesn't work..
If i install root it will show it,but if i unroot it goes away but still stays in priv-app or system/app.
I'm on Nougat 7.0
Try this one instead
For all Samsung Galaxy J701F users - Test Root with bypass defex
With the last TW firmwares Samsung released A new security called [Defex].
And this protection prevent any process to run as root if it was not in the whitelist that provided in the kernel source code:
Code:
/system/bin/run-as
/init
/sbin/
/system/bin/
/system/xbin/
/system/vendor/bin/
/vendor/bin/
/tmp/update_binary
So if any app wants to run an elf executable in [e.x "/data/local/tmp"] like [Titanium Backup] of [ES File Explorer] the elf executing process will returns with Killed.
The first release of this protection was in Galaxy A8 2018 (SM-A530F) Android 8.0.0
and then released in Galaxy Note 9 (SM-N960F) 8.1.0
And all of these protections was defeated by some hex patching.
Now it is the time for SM-J701F:
Samsung released the source code of J701F today so i downloaded it and get a new patch to defeat the security
Magisk for deflex
Yes it is working on oreo rom but twrp is not mounting internal storage while using oreo rom on j7 nxt but twrp is working with naugat roms perfectly
Suraj199 said:
Yes it is working on oreo rom but twrp is not mounting internal storage while using oreo rom on j7 nxt but twrp is working with naugat roms perfectly
Click to expand...
Click to collapse
Did you try a factory reset and did you try the Root or what ?
defexer said:
Did you try a factory reset and did you try the Root or what ?
Click to expand...
Click to collapse
now my device is rooted its working
when i format through twrp it mount internal memory but after reboot again it unmount internal memory
thank you
avishekthapamagar said:
now my device is rooted its working
when i format through twrp it mount internal memory but after reboot again it unmount internal memory
thank you
Click to expand...
Click to collapse
Thanks for confirmation
Yes working successfully Root 8.1 Rom Thankyou Very much No Bugs
The magisk manager doesn't show any modules available for download but for root it works fine.
Thanks a bunch for fixing root. I didn't upgrade until this was available!
Hey ! do working successfully ? my phone no sim card error then magisk 17.1 17.2 or 16.4 install from TWRP
File removed
Hi defexer, You shared the twrp recovery file has removed from the link. I need the recovery because I have updated my j7 nxt to android version 8.1 and need to root the mobile. please help.
This work in j5 prime and j7 prime?
gabrielunm said:
This work in j5 prime and j7 prime?
Click to expand...
Click to collapse
Not sure. But take a backup and try Magisk/SuperSU from here: https://forum.xda-developers.com/an.../test-disable-defex-security-samsung-t3851487
Don't forget to confirm in that thread if it works. :good:
The link you provided isn't working. It must have been deleted due to some violations.
DJBhardwaj said:
Not sure. But take a backup and try Magisk/SuperSU from here: https://forum.xda-developers.com/an.../test-disable-defex-security-samsung-t3851487
Don't forget to confirm in that thread if it works. :good:
Click to expand...
Click to collapse
teraworld said:
The link you provided isn't working. It must have been deleted due to some violations.
Click to expand...
Click to collapse
Its back up
I recently updated my J7 Core to Oreo and after that, my oem option is gone and download mode displays RMM State: Prenormal. It hasnt been rooted before and whenever I install a font or themes, nothing shows up. What should I do?
kindly share your twrp?
shahidrok said:
Yes working successfully Root 8.1 Rom Thankyou Very much No Bugs
Click to expand...
Click to collapse
ive updated mine and my previous twrp is not working
Need help sir .. after launch official update from samsung to upgrade from nougat to oreo , my touchscreen not working at all .. only back and menu softkey still working . I followed many tutorial from many threads but still cant fix my j7 core / nxt touchscreen . now my j7 core / nxt is in oreo 8.1.0 , samsung experience version version 9.5 , build number M1AJQ.J701FDDU6BRI1
i can still using it with usb otg mouse to control ...
realy realy need help sir .. can you and anyone here help me please .. need solution
https://drive.google.com/open?id=1hgmUNrS4UdQjQt-sg5wKVEzNze_PWNxU
Magisk has been updated a couple times since the missing file was first uploaded so perhaps this isn't necessary anymore.
PantsDownJedi said:
https://drive.google.com/open?id=1hgmUNrS4UdQjQt-sg5wKVEzNze_PWNxU
Magisk has been updated a couple times since the missing file was first uploaded so perhaps this isn't necessary anymore.
Click to expand...
Click to collapse
i tried rooting my fone and it booted successfully.. but after few moments the antivirus kept on prompting to reboot the fone
jam24ph said:
i tried rooting my fone and it booted successfully.. but after few moments the antivirus kept on prompting to reboot the fone
Click to expand...
Click to collapse
I don't know if you have 3rd party antivirus or not, but if so you'll want to whitelist what its complaining about if you can, otherwise uninstall or freeze the antivirus.
You also want to freeze down Security Log Agent, possibly Device Security, and also Knox related apps are important. There's lots of apps to freeze things down but I've used Titanium Backup for so long that I haven't payed attention to other ones and don't know what they're names are. It can be done at the command line as well. Search for what works and is free, because that feature I think isn't free in non paid version of Titanium backup.
---------- Post added at 03:55 PM ---------- Previous post was at 03:51 PM ----------
Also, if you've gotten errors at TWRP not being able to mount /data you might want to install the Magisk apk separately and then update the Magisk app from the running phone environment assuming it lets you.
PantsDownJedi said:
https://drive.google.com/open?id=1hgmUNrS4UdQjQt-sg5wKVEzNze_PWNxU
Magisk has been updated a couple times since the missing file was first uploaded so perhaps this isn't necessary anymore.
Click to expand...
Click to collapse
PantsDownJedi said:
I don't know if you have 3rd party antivirus or not, but if so you'll want to whitelist what its complaining about if you can, otherwise uninstall or freeze the antivirus.
You also want to freeze down Security Log Agent, possibly Device Security, and also Knox related apps are important. There's lots of apps to freeze things down but I've used Titanium Backup for so long that I haven't payed attention to other ones and don't know what they're names are. It can be done at the command line as well. Search for what works and is free, because that feature I think isn't free in non paid version of Titanium backup.
---------- Post added at 03:55 PM ---------- Previous post was at 03:51 PM ----------
Also, if you've gotten errors at TWRP not being able to mount /data you might want to install the Magisk apk separately and then update the Magisk app from the running phone environment assuming it lets you.
Click to expand...
Click to collapse
what im referring to is the device security, after the succesfull bootup from flashing magisk..