Database Info

Ways to Root your Samsung Galaxy Tab 4

Ways to root your Samsung Galaxy Tab 4 7.0​All of the guys on the list is tested by me and it's working
For those guys who can't root their tablet, this thread is the right place for you
1. This is the Easiest Way to Root your tablet
KingRoot App Download it here
http://www.appsandroidapk.com/apk/kingroot-v4-6-2-apk-file-for-android/
Download the app
Before installing it Go to Settings > General Tab > Security > and Enable "Unknown Sources"
Install the app and Root your phone.
You might wanting to have a SuperSU instead of kingroot's SU
Google it SuperSU Me Download the latest version or you can find it here in this link
http://forum.xda-developers.com/general/paid-software/supersu-please-t3110954
Update the SUBinary
Reboot
2. KingoRoot App apk version
Download Link
https://root-apk.kingoapp.com/
Download the app
Before installing it Go to Settings > General Tab > Security > and Enable "Unknown Sources"
Set your device atleast 10 minutes before sleep due to inactivity
Install and Root your Device
Do nothing while rooting "Like tapping or bringing down the notification bar" this is why i make you set the 10minute-sleep
1st/2nd attempt might fail but on the other hand it will succeed
You might wanting to have a SuperSU instead of kingoroot's SU
Google it SuperSU Me Download the latest version or you can find the link here
http://forum.xda-developers.com/general/paid-software/supersu-please-t3110954
Update the SUBinary
Reboot
3. Root Using TWRP (old)
Requirements
TWRP link is here
http://forum.xda-developers.com/attachment.php?attachmentid=3128455&d=1421957427
Important: Odin3 v1.85 Direct download Link
http://forum.xda-developers.com/attachment.php?attachmentid=581913
PC
On your pc Open Odin3 v1.85
Click PDA and choose the tar file that you've downloaded
Tick Auto Reboot and F. Reset time
Now go to your device, Boot into download mode ( Power it off wait until it vibrates then press Home,Power and Volume Down Simultaneously)
Plug your device into your Computer (Install drivers here's the link http://www.mediafire.com/download/o3exocwabcxax3b/SAMSUNG_USB_Driver.exe)/ Some Pc install drivers automatically just wait them to install or if you already install the drivers skip driver installation procedure)
Click Start if the Odin detects your phone, your phone will automatically reboot
Now Boot your phone into Recovery Mode by (Turning it off and Press Power + Home + Volume up)
It will boot into TWRP
Press Reboot > System and it will ask you if you want to get root and swipe it to install
Update SuperSU and make another reboot
You can also update your TWRP using this zip file
https://www.androidfilehost.com/?fid=24052804347818249
Now if you really can't root your tablet and you're desperate, try another version of your stock firmware, you can find your stock firmware on Google, after that do this procedure again
Done.
Other Links to make your tab Rooted
http://forum.xda-developers.com/showthread.php?t=3111934
http://forum.xda-developers.com/tab-4/help/twrp-install-twrp-root-samsung-galaxy-t3095736
Developers that has credit on all of this
@BRoy_98
@pinksworld
@gatesjunior
and sorry if i haven't mentioned the others, i dont know who to give credits
SORRY SOME OF MY ENGLISH IS REALLY BAD

Yay another one, I think this is the fourth of this same exact thread
You might want to mention how kingroot/kingoroot send your personal data to Chinese servers and the twrp builds you linked to only work fur the SM-T230, SM-T230NU, and SM-T231, and will not work for any of the several other Tab 4 7" variants

Just imagine that I just put all those threads together ahaha: )

thisisapoorusernamechoice said:
Yay another one, I think this is the fourth of this same exact thread
You might want to mention how kingroot/kingoroot send your personal data to Chinese servers and the twrp builds you linked to only work fur the SM-T230, SM-T230NU, and SM-T231, and will not work for any of the several other Tab 4 7" variants
Click to expand...
Click to collapse
I dunno if that issue is real, but no worries we have supersu me

thisisapoorusernamechoice said:
Yay another one, I think this is the fourth of this same exact thread
You might want to mention how kingroot/kingoroot send your personal data to Chinese servers and the twrp builds you linked to only work fur the SM-T230, SM-T230NU, and SM-T231, and will not work for any of the several other Tab 4 7" variants
Click to expand...
Click to collapse
I dont think that if you install first supersu me and then kingroot your tab, after root turn wifi off and use supersu me, no data sent to anyone........ anyways it doesnt send your passowords etc to china, just like browser data and few app datas.... but theres no way to get passwords.... all are crypted or hidden well in smali

thelous said:
I dont think that if you install first supersu me and then kingroot your tab, after root turn wifi off and use supersu me, no data sent to anyone........ anyways it doesnt send your passowords etc to china, just like browser data and few app datas.... but theres no way to get passwords.... all are crypted or hidden well in smali
Click to expand...
Click to collapse
I wouldn't be sure about that. If you type in your password, once rooted, anything can easily capture the keyboard input and log it or send it out. Let me elaborate. It's like the guys who say, "Hey I have a firewall installed so it cannot communicate out." Yeah, o.k., so all the firewalls do is manage IPTABLES, so if I am an application and have root access, I can do what I want to avoid your firewall rules quite easily. Just a thought.

Hmm, updating the binary will remove the @#$%&* thing , we're just going to use the app to root our phone, and I guess wiping cache and dalvik is necessary

BTW tab 4 is best for gaming because of it looks and size but due to a stupid Samsung company, 1.2ghz + vivante gc1000 expect lagging, I hope some kind hearted will make a custom kernel for overclocking this tab.

BTW There's no Tex plugin on gltools, installing default will not work, so you have to find a cracked version of gltools, well if you do that... R.I.P expect force closes

gatesjunior said:
I wouldn't be sure about that. If you type in your password, once rooted, anything can easily capture the keyboard input and log it or send it out. Let me elaborate. It's like the guys who say, "Hey I have a firewall installed so it cannot communicate out." Yeah, o.k., so all the firewalls do is manage IPTABLES, so if I am an application and have root access, I can do what I want to avoid your firewall rules quite easily. Just a thought.
Click to expand...
Click to collapse
Well i didnt say anything about firewalls i was daying if you manually disable wifi and use king root, it wont be able to connect anywhere to send any data.... also you can search by date and time files made during root session and remove everything to prevent any keyloger to work

Have ODIN and a stock image ready!!!
Be careful with this root process! The sm-t237p 5.1.1 OH7 boot loops and won't hold the root or Philz recovery... Yet!:cyclops:

thelous said:
Well i didnt say anything about firewalls i was daying if you manually disable wifi and use king root, it wont be able to connect anywhere to send any data.... also you can search by date and time files made during root session and remove everything to prevent any keyloger to work
Click to expand...
Click to collapse
No. I can easily change the file and date stamp to match any given system file you already have so that it is not easy to find. Also, Kingroot will not run correctly and root your device properly if it cannot contact it's servers to download the proper exploit for your device. Now, if you are talking about disabling wifi only so that Kingroot cannot contact it's servers after you are rooted, well, if you use any data what so ever, it can use that same data connection. As an example, I have to have data of some type to login to my bank site, etc..

SM-T237P Specific maybe others with PhilZ recovery...
Root Success! Check this out... http://forum.xda-developers.com/showpost.php?p=64182938&postcount=15

gatesjunior said:
No. I can easily change the file and date stamp to match any given system file you already have so that it is not easy to find. Also, Kingroot will not run correctly and root your device properly if it cannot contact it's servers to download the proper exploit for your device. Now, if you are talking about disabling wifi only so that Kingroot cannot contact it's servers after you are rooted, well, if you use any data what so ever, it can use that same data connection. As an example, I have to have data of some type to login to my bank site, etc..
Click to expand...
Click to collapse
Well, atleast my bank account cant be logged with different ip and if its tried i recice message wheres code that you need write to bank website to access account.... however i havent lodt any accounts yet after rooting with kingroot, it has so manynusers that they cant check all information they recive, just like facebook and whatsapp... (they're spying watnu do but they have too many users so it would take like unlimited time to check all accounts and keybindings thru.....

K94U said:
Root Success! Check this out... http://forum.xda-developers.com/showpost.php?p=64182938&postcount=15
Click to expand...
Click to collapse
You can use any kind of cwm to flash a zip file that can root your device, This was an alternative way, just find a cwm to flash hehe

Siegharf said:
You can use any kind of cwm to flash a zip file that can root your device, This was an alternative way, just find a cwm to flash hehe
Click to expand...
Click to collapse
Flashing recovery trips KNOX (no warranty or OTA updates) and the other method sometimes doesn't... Also, the recovery/zip method stopped working on lollipop and marshmallow with the older SuperSU builds but... Chainfire has a new BETA SuperSU 2.6X that is a systemless root and now working on the newer Android builds using the recovery/zip method. This seems to work for mostly ALL Samsung and Nexus devices... Read about it here:
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
I restored my nandroid backup in recovery just to try this on my sm-t237p lollipop and it worked the first time!!! All apps get root access OK except es file explorer(now bloatware anyway)... You might need to install busybox for things to work... :good: :laugh:

K94U said:
Flashing recovery trips KNOX (no warranty or OTA updates) and the other method sometimes doesn't... Also, the recovery/zip method stopped working on lollipop and marshmallow with the older SuperSU builds but... Chainfire has a new BETA SuperSU 2.6X that is a systemless root and now working on the newer Android builds using the recovery/zip method. This seems to work for mostly ALL Samsung and Nexus devices... Read about it here:
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
I restored my nandroid backup in recovery just to try this on my sm-t237p lollipop and it worked the first time!!! All apps get root access OK except es file explorer(now bloatware anyway)... You might need to install busybox for things to work... :good: :laugh:
Click to expand...
Click to collapse
There's kies or custom ota flashing

K94U said:
Flashing recovery trips KNOX (no warranty or OTA updates) and the other method sometimes doesn't... Also, the recovery/zip method stopped working on lollipop and marshmallow with the older SuperSU builds but... Chainfire has a new BETA SuperSU 2.6X that is a systemless root and now working on the newer Android builds using the recovery/zip method. This seems to work for mostly ALL Samsung and Nexus devices... Read about it here:
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
I restored my nandroid backup in recovery just to try this on my sm-t237p lollipop and it worked the first time!!! All apps get root access OK except es file explorer(now bloatware anyway)... You might need to install busybox for things to work... :good: :laugh:
Click to expand...
Click to collapse
235 LTE 5.1.1 rooted as well
http://forum.xda-developers.com/showpost.php?p=64255121&postcount=1
(not spamming in case anyone got the idea)

[Q&A][FAQ][TW][N][7.0][SM-G930F/FD/K/L/S/W8] SuperMan/SuperStock-Rom

Hello guys, I open a Question and Answer Thread for all SuperMan Rom users, so even users under 10 posts can ask their questions here.
Below I added some basic Q&A stuff which can also be found at the main thread, if you have any question, read through them before posting, thanks!
In case you search for the changelog have a look: Changelog post
If you want to see my post with all useful links such as TWRP, magisk, xposed and more visit: useful post​
Basic Questions:
Q: How to get into Download Mode?
A: Power off your phone, than hold: home + volume down + power on button until you see the download mode.
Q: How to get into Recovery Mode?
A: Power off your phone, than hold: home + volume up + power on button until you see the recovery mode.
Q: My Phone is stuck at boot and doesn't start, what to do??
A: Update your bootloader and modem. Also make sure you have made a fresh install of the rom. Bootloader and Modem can be found in the OP. Another problem can be that you are didn't decrypt your phone. To fix this read below how to disable encryption.
Q: Do I need to update bootloader and modem after every update?
A: It's recommend to update your bootloader and modem everytime there is a new base yes. The developer will tell you if necessary on every rom changelog.
Q: I get verification failed at start up!?!? My phone is broken now?
A: Yes, you have to buy a new phone now. Just kidding You did not disable force encryption in TWRP (how to do so you will find below in how to decrypt your phone).
Q: I get verification FRP LOCK? WHYYYYYY???
A: Very simple answer, you did not enable OEM Unlock in developer options. Now you need to flash full rom with odin again and start from scratch. But don't forget to enable OEM Unlock this time!
Q: Which devices are supported at the moment?
A: Current supported devices are: SM-G930F/FD/K/L/S/W8. Snapdragons are NOT supported
Q: Is this rom working on Snapdragon 820 variants?
A: No, sadly not.
Q: I want to change something in my rom setup, how can I do that?
A: Simply reflash the same rom version without any wipe and than choose the correct things you want.
Q: Some features are not present in this rom, but they are on stock rom, so where are they?
A: In aroma installer you have the option to select bloat you want to install or not, you probably didn't select all package, this is why it's missing now.
Q: After a clean install my phone is overblated with many custom settings. What to do?
A: Open my romcontrol, grant it root permissions and then my default settings will be applied.
Q: Will you add X or Y feature?
A: You can kindly ask in the thread for that, if I like your suggestion I will think about adding it to the rom.
Q: You said you fixed SD card RW but Titanium Backup can't write to external SD card, why???
A: This is because of googles changes concerning SD card, to fix this open Titanium Backup, Menu, Preferences, Backup Folder Location, Storage provider and than hit DocumentProvider Storage and select your SD card. Problem solved
Q: I can't find X and Y mod. Please help
A: I've added many links and useful stuff to this post here. Hope that's what you have been looking for!
Q: I want to have my external storage like an internal as well. Google introduced it with android Marshmallow, but I can't see this option?
A: Just follow this Guide here and you can setup your SD card as normal storage
Q: I got a new strange icon appearing after nougat update. What's that?
A: This is a new advanced calling feature introduced in android nougat. Should make your call quality better or something like this. To hide it please visit following forum: Get rid of RCS icon
Questions concerning rom updates:
Q: Do I have to do a full wipe for the new version?
A: It is always the best option to make a clean install, otherwise please don't come and report bugs!
Q: But I don't want to make a full wipe when only small stuff changed!
A: For updates using the same bases you can install the rom with a dirty flash. BUT with a new base a clean install is highly recommend!
Q: What steps should I do to update to a new version with a full wipe but keep all data?
A: There are some different ways. One way is to make a backup with Titanium Backup, you can backup all Apps and Preferences there. Make sure to store this backup on external SD card (if you have one). Second way would be to save your data onto a google account or samsung cloud and restore it after a clean install.
Q: I miss an apk after rom update, how can I get it back?
A: Simply reflash rom and select "dirty flash" in aroma + select the app this time in aroma.
Q: My battery life is so bad and performance is very poor after an update!?!?
A: This comes actually not form the rom itself, dirty flash can cause problems even if only some small things have been changed. So simply install it clean again and it will solve your problem.
Q: Performance and battery is very poor even after clean install. What should I do now?
A: I assume you installed Xposed than, some modules can cause batterydrain and performance problems. So try to make a clean install of the rom WITHOUT xposed installed.
Questions about log and logcats:
Q: I got FC's and other Problems with the rom, what to do?
A: Take a logcat for me, developers use to say: without a log, it never happened . A logcat can be grabed with a PC and ADB installed, simply type: adb logcat > log.txt while your phone is connected and the error is happening. Same can be done if you have a terminal installed on your phone. Simply type adb logcat > log.txt and you will have the same output as on the PC.
Q: What kind of logs can I provide to help you?
A: Logcat: This one is for general infos about FC's
DMESG: this is for kernel related things
Last_Kmsg: this can be used after a random reboot
Q: How to get logs?
A: 1. Connect your phone to your pc
2. Make sure you got usb debugging enabled
3. Install Minimal ADB tool
4. After install open it and type: adb logcat > logcat.txt, adb shell dmesg > dmesg.log, adb shell cat proc/last_kmsg kmsg.log
5. Send me the file you got
You can also send me a log created by your phones terminal with the exact same commands!
Questions about RomControl:
Q: None of my romcontrol changes do anything, why are you such a bad dev!?!?
A: The problem is not on my end, you installed stock systemUI (which is STOCK and does not support one single mod). Use another one in aroma instead. The same thing can happen with good lock!
Q: Romcontrol gives FC's to me. HELP!
A: Very simple answer here: wipe data and cache from superman control application. Also make sure storage permissions are given to the romcontrol.
Q: Romcontrol still FC after cleaning data and cache!
A: Make sure you allow storage permission in main settings.
Q: I try to backup my current RomControl setup, but it won't work?
A: It works. Just make sure to enable storage permission in main samsung applicatoin settings. You will find it in internal sdcard under RomControl folder.
Q: I can't restore SuperMan control settings after a clean base update, why?
A: Backup for SuperMan control only works as long as you use the same version of the app, I mostly change very much things in new releases that's why it won't work there.
Q: SystemUI reboot doesn't work in SuperMan settings app, why?
A: Since Nougat update, you need to install busybox in order to get this button working. Without busybox the button will just do nothing.
Q: I enabled weather on lockscreen but I can't see anything...
A: You probably didn't setup or even installed samsungs weather widget. Without it weather on lockscreen won't work too. So reflash the rom with the widget installed this time and set it up.
How to go back to stock:
Q: I like to go back to stock rom, how is this possible?
A: I can provide you here all steps which are needed to go back to a full stock rom.
0. Make a backup and than wipe all partitions in TWRP
1. Go to Sammobile and choose your country
2. Download the file and the attached Odin on sammobile
3. After downloading, put your phone into download mode
4. Make sure drivers are installed and your pc can detect your phone in odin
5. If the box in odin turns blue, add the AP file to AP tab, BL file to BL tab, CP file to CP tab and CSC_HOME to CSC tab
6. Hit start and wait until it is finished.
7. Reboot and you have a stock rom again
Questions about Encryption:
Q: On TWRP there is an error about /data mount, what to do?
A: Your device is encrypted, follow the steps below to get rid of your encryption.
Q: Help, I never had a code and now after installing the rom my phone asks for a password??
A: Your device is still encrypted, on step 0 of my rom instructions it tells you to be sure you're not. So, what do you need to to in case you are still encrypted.
A: HOW TO DISABLE ENCRYPTION:
1. Boot into TWRP
2. Select Wipe
3. Select format data
4. Then you manually need to type "yes" with the keyboard
5. Confirm the wipe (this will remove the encryption)
6. Reboot your recovery
Q: Is there a way to get rid of encryption which is simpler?
A: Not really, you could also wipe data with stock recovery but this is quite a big hassle so above method works better.
Q: And if I want to use this rom with encryption?
A: Normally we can use the stock kernel to encrypt our device, but since the Android 7.0 Nougat update samsung makes a check kernel sides to block deodexed roms from booting. This means that even the stock kernel is build by me to disable knox and tima. So encryption won't work there and you have to encrypt your device after you set up your phone. After that go to settings, security, encrypt device. It may need some additional steps to work...
Questions about CSC/Signal:
Q: Where has the CSC selection gone?
A: To include all csc files, the rom get way to big, so it got it's own thread now, take a look here: CSC installer
Q: I have a weak cellular signal, what can I do against it?
A: Two things: first, install your providers CSC using CSC installer and flash in TWRP or flashing stock CSC with Odin. Second Thing: You can install the modem from your provider, also find your modem on Sammobile and install it with Odin in CP tab.
Q: I don't have all sHealth features, how come?
A: Not all CSCs include this feature. I recommend to use AUT or DBT as it has the best compatibility!
Q: Can I flash MM CSC on N and vis a verse?
A: No, this is clearly not recommend! You can and will face call fc's!
Questions about Xposed:
Q: Does Xposed work yet on Android N 7.0?
A: No it does not! You will end up in a bootloop when you flash it on android N
Q: I selected xposed but now I don't see an app for it?
A: Maybe there went something wrong with installing the app to /data/app from my installer script. But xposed is actually installed only the app is missing, so head over to the download page of xposed app: Material Xposed Thread
Q: I selected xposed but the app shows not active or something else with xposed is not working.
A: This can have 2 reasons:
1. You have installed latest xposed version without installing magisk, magisk is required for most recent xposed version!
2. You used 86.2 xposed (which does not need magisk) but you did not install supersu. Since 86.2 does not use magisk to be systemless it uses supersu instead!
Questions about Magisk:
Q: How can I pass safetynet?
A: 1. Make sure to fully uninstall SuperSU by chainfire
2. Flash most recent 2.4.3 SuperStock Kernel
3. Flash Magisk V12
4. install latest Magisk Manager from playstore
5. Open Magiks Manager, go to settings
6. Enable MagiskHide, systemless hosts and systemless busybox
7. Reboot the phone and check safetynet!
Q: I got out of date binary issue?
A: Since Magisk V11.1 there is no need for phh root anymore. Everything is handled inside the MagiskManager apk!
Q: Where can I configure the root settings in Magisk?
A: Since Magisk V11.1 Magisk uses MagiskSU, you can find it in latest Magisk Manager V4.1
Questions about Snapchat:
Q: Even when I did not use xposed during my setup in rom I can't login to snapchat anymore!
A: Snapchat got updated and now detects even root access on your phone!
Q: What to do to login to snapchat then?
A: Clean install the rom without root and xposed and login to your snapchat, save the app with titanium backup, flash back xposed and root. For the next update of the rom just restore snapchat backup in TB.
Q: Any other possibility?
A: You could enable MagiskHide and check Snapchat inside it so root will be hidden from Snapchat. You will be able to perfectly login without any issues.
Q: I want to discuss this problem a bit deeper. Should I do so?
A: Do that, but this has nothing to do with this rom, so please go ahead and post your experience here on this Snapchat Thread.
Questions about Kernels:
Q: I want to switch kernel, how?
A: Since we have systemless xposed and systemless supersu, we have patches in ramdisk of boot.img. This means you have to reflash Magisk and supersu (or any other zip that changes some stuff in ramdisk partition) after every change of kernel!
Q: Synapse shows no UCI support!
A: Most comon issue is that no busybox is installed. Download the one from here: Latest busybox and flash it in recovery.
Q: I got random reboots, heeelp!
A: This is most likely from a custom kernel, if you face random reboots please check if you have the latest kernel installed or switch back to the stock kernel included in the rom.
Q: My screen is kind of yellow/orange and the touchscreen doesn't work at all!
A: You have chosen the wrong kernel in aroma selection. Reflash the rom without any wipe selecting the right kernel version.
Questions about Root:
Q: I lost root after installing this rom. What to do?
A: All mods (like supersu, phh's root, xposed and magisk) are stored in ramdisk of kernel boot.img. So if you flash this rom, and after this another kernel, simply reflash your preferred root method and it will work again!
Q: I selected phh root but my phone tells me I am not rooted!!
A: There are two possibilities:
1. You have mixed supersu/phh with magisk.
2. You did not install phhs root app from playstore.
Q: I get a warning about binary out of date. Help!
A: That happens on latest Magisk V11.1. Reason: Root has fully moved into Magisk Manager, no additional app required. Uninstall phh or supersu apps and only use magisk!
Q: I want to use su hide on my phone, how to do so?
A: Both below variants are outdated, I recommend to use Magisk with its build in MagiskHide. Check the thread: Magisk Thread
Link to phh's hidesu: Phh's thread
Link to chainfires suhide: Chainfires thread

Hi,
I have a bit of a silly question. I have enabled the torch to be turned on by the volume button but now want to turn that function off and can't remember where i enabled it from. I have looked everywhere but can't find it. Are you able to point me in the right direction.
Many thanks.

reeves72 said:
Hi,
I have a bit of a silly question. I have enabled the torch to be turned on by the volume button but now want to turn that function off and can't remember where i enabled it from. I have looked everywhere but can't find it. Are you able to point me in the right direction.
Many thanks.
Click to expand...
Click to collapse
Hello
Settings, display, torchlight
Sent from my SuperMan powered SM-G930F

Tkkg1994 said:
Hello
Settings, display, torchlight
Sent from my SuperMan powered SM-G930F
Click to expand...
Click to collapse
Thanks that was driving me crazy.

downloadable files verification
Can some one verify that all of the downloadable files on the OP are the correct ones?
Can't seem to get it working, the steps I follow, are as following.
-> flash to stock rom from sammobile
-> OEM unlock
-> flash latest TWRP
-> in TWRP, format data
->install latest BL and CP from OP
-> flash rom -> Clean install
result is a non booting superman rom.. What can I do? I have been trying for DAYS now...

grave-diggers said:
Can some one verify that all of the downloadable files on the OP are the correct ones?
Can't seem to get it working, the steps I follow, are as following.
-> flash to stock rom from sammobile
-> OEM unlock
-> flash latest TWRP
-> in TWRP, format data
->install latest BL and CP from OP
-> flash rom -> Clean install
result is a non booting superman rom.. What can I do? I have been trying for DAYS now...
Click to expand...
Click to collapse
There are several reasons:
1. Encryption is still enabled
2. BL/CP was not successfull
3. You mixed your settings about G930F or G935F model

I noticed a few things in aroma log when it was installing
failure to boot.img extracting ramdisk failure, aborting, is this something that's causing the problem?
I am still not getting it right..

grave-diggers said:
I noticed a few things in aroma log when it was installing
failure to boot.img extracting ramdisk failure, aborting, is this something that's causing the problem?
I am still not getting it right..
Click to expand...
Click to collapse
Thats not really good lol. Redownload the rom. Maybe you got a corrupt zip file
Sent from my SuperMan powered SM-G930F

Holy crap I got it to work.. 4 days of trying to get this to work made me get alot of knowledge about this stuff, the file was corrupt, redownloading the file worked.

grave-diggers said:
Holy crap I got it to work.. 4 days of trying to get this to work made me get alot of knowledge about this stuff, the file was corrupt, redownloading the file worked.
Click to expand...
Click to collapse
Finally!
Sent from my SuperMan powered SM-G930F

Right at this point I am wondering why snapchat doesn't want to log me in. There's no xposed or snapprefs on my phone, exposed uninstaller was flashed. Does this come familliar? There has to be a workaround without having to use bluestacks right?

grave-diggers said:
Right at this point I am wondering why snapchat doesn't want to log me in. There's no xposed or snapprefs on my phone, exposed uninstaller was flashed. Does this come familliar? There has to be a workaround without having to use bluestacks right?
Click to expand...
Click to collapse
Someone said that it even checks for root now

Okay, here's the solution. If you find yourself having trouble logging in in to snapchat on a rooted device without xposed framework installed. Make sure to search for xposed using root explorer, delete all system files manually.. For some reason xposed uninstaller did not completely remove every xposed file in my phone.

SM-G930L
Does this ROM works on Korean variant? SM-G930L is the model. Thanks in advance

genorazer said:
Does this ROM works on Korean variant? SM-G930L is the model. Thanks in advance
Click to expand...
Click to collapse
Make a full backup and try
Sent from my SuperMan powered SM-G930F

Im on fully stocked g930fd
Can u confirmed is this the correct sequence
Root
Install twrp
Make a back up
Make a clean flash
Install superman rom

tatuboy said:
Im on fully stocked g930fd
Can u confirmed is this the correct sequence
Root
Install twrp
Make a back up
Make a clean flash
Install superman rom
Click to expand...
Click to collapse
No need to flash root. Flash twrp, flash bl and cp? backup, wipe (remove encryption) flash rom.
Sent from my SuperMan powered SM-G930F

Tkkg1994 said:
No need to flash root. Flash twrp, flash bl and cp? backup, wipe (remove encryption) flash rom.
Sent from my SuperMan powered SM-G930F
Click to expand...
Click to collapse
Can u link to me the needed files?
If it have video tutorial much better..
Im from oneplus3 users before.
So i dont have much knowlege in s7.
I need to know
First how to flash TWRP?
2ND What is bl? U mean boot loader?
Cp? What does it mean for?
Then after i back up. And wipe.
How to remove encryption?

tatuboy said:
Can u link to me the needed files?
If it have video tutorial much better..
Im from oneplus3 users before.
So i dont have much knowlege in s7.
I need to know
First how to flash TWRP?
2ND What is bl? U mean boot loader?
Cp? What does it mean for?
Then after i back up. And wipe.
How to remove encryption?
Click to expand...
Click to collapse
Okay you want to install this rom. So go to my main page and follow all android beginner steps. Very detailed guide there
Sent from my SuperMan powered SM-G930F

Tkkg1994 said:
Make a full backup and try
Sent from my SuperMan powered SM-G930F
Click to expand...
Click to collapse
is there a chance it could brick the phone?

[HOW-TO] Get Pokémon Go working on Verizon Samsung Galaxy S5 with unlocked bootloader

This is working for me. Not exactly sure of the exact steps as I've been trying everything for months now. That being said this is what I currently have working for me.
1. Install xposed
2. Install hide much locations and add Pokémon go to the blacklist.
3. Reboot to TWRP recovery.
4. Run Uninstall xposed zip file.
5. In TWRP mount system and open file manager.
6. Delete system/bin/su folder and xbin/su folder.
7. Reboot system
8. Install Fake GPS from play store if you want a working joystick.
Sent from my SM-G900V using Xposed Modules

cool work around. thanks for figuring this out

MrTwigglesworth said:
This is working for me. Not exactly sure of the exact steps as I've been trying everything for months now. That being said this is what I currently have working for me.
1. Install xposed
2. Install hide much locations and add Pokémon go to the blacklist.
3. Reboot to TWRP recovery.
4. Run Uninstall xposed zip file.
5. In TWRP mount system and open file manager.
6. Delete system/bin/su folder and xbin/su folder.
7. Reboot system
8. Install Fake GPS from play store if you want a working joystick.
Sent from my SM-G900V using Xposed Modules
Click to expand...
Click to collapse
Does this method work on both AOSP & Touchwiz roms?

krazie1 said:
Does this method work on both AOSP & Touchwiz roms?
Click to expand...
Click to collapse
I'm not sure bud, it's still working for me on CM. I think there must still be some settings from when phone was rooted with exposed running that didn't get wiped out when I uprooted. I can still access and run most of the xposed modules I had running but they behave a bit differently.

[Guide] How to use latest S-Health on devices with Knox tripped (0x1)

As some of you will know, Samsung have no longer allowed S-Health to work on devices where Knox has been tripped.
This guide will show you how to get the latest version of S-Health to run without this block
Rooted Devices
This method requires you to be rooted. You can always unroot after doing this
​If you are not rooted you can root your device by following the instructions below:​​
​
Download TWRP and save it somewhere you will remember.
Open ODIN and press AP then select the TWRP file you just downloaded.
Put your phone into Download Mode by holding Power + Volume Down + Home.
Connect your phone to your computer using a USB cable. Then Press Start in ODIN.
Download SuperSU-v2.79-SR3 and save it to your phone's SD Card.
Power off the phone and then hold Power + Volume Up + Home to boot to TWRP.
Press Install and locate the SuperSU file you downloaded earlier. Select it and Install.
You are now rooted.
​To remove root, simple open the SuperSU app from your app drawer, go to settings and select Full Unroot​
​
Follow the steps below to remove the S-Health block.
Download a root file explorer (such as Root Explorer, Root Browser or ES File Explorer).
Open the root file explorer and go to the /system folder.
Open the file named build.prop in text editor
In the build.prop file look for ro.config.tima=1
Change this line to ro.config.tima=0, simply changing the 1 to a 0
Reboor phone
Run the S-Health app
Non-Rooted Devices
If you are not rooted and/or cannot root then you can follow the steps below to get S-Health working (this will only work if the app is not installed as a system app).
Uninstall the S-Health App (if you cannot uninstall the app, this means it is installed to the system partition. Try Method 2 below).
Install version 4 of the S-Health app which can be found HERE
Open the app and complete setup
Update the S-Health app via the app store
You should now be able to use the S-Health app without issue
You can now use S-Health even with tripped Knox!!
{Mod edit: Download links via a suspicious URL has been removed}

Cannot download your S Health 4.8.1. Clicking the link asks me to log in to Facebook but, when I do, I get Sorry, your request could not be processed. Please try again. Can you upload it somewhere else?

Wonderful! It worked!

Hi
I update to nougat today an checked if i can use s health abd i didn't notice any problem.......no Error....i can use it normally as i use to do....keep in mind that I already've lost the knox waranty and it tells me that i got the latest version of s health

norm2002 said:
Cannot download your S Health 4.8.1. Clicking the link asks me to log in to Facebook but, when I do, I get Sorry, your request could not be processed. Please try again. Can you upload it somewhere else?
Click to expand...
Click to collapse
Apologies. I have updated the link in the OP.
Hammoud Abbas said:
Hi
I update to nougat today an checked if i can use s health abd i didn't notice any problem.......no Error....i can use it normally as i use to do....keep in mind that I already've lost the knox waranty and it tells me that i got the latest version of s health
Click to expand...
Click to collapse
Ye some people don't seem to be locked out. I've no idea why.

CuBz90 said:
Apologies. I have updated the link in the OP.
Ye some people don't seem to be locked out. I've no idea why.
Click to expand...
Click to collapse
thank God then

My S health version is 5.4.1.0003. Working perfectly on Nougat. And have never had an issue with s health before.
Sent from my SM-G935F using XDA-Developers Legacy app

Shidapu said:
My S health version is 5.4.1.0003. Working perfectly on Nougat. And have never had an issue with s health before.
Sent from my SM-G935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Like I said, it works fine for some. This is for those that cannot access it.

Shidapu said:
My S health version is 5.4.1.0003. Working perfectly on Nougat. And have never had an issue with s health before.
Sent from my SM-G935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Also here works perfectly with knox 0x1

ManDone.vRs said:
Also here works perfectly with knox 0x1
Click to expand...
Click to collapse
yes, but if u ever do a factory reset will not work anymore...with knox 0x1

Anyone having problem on step 11?
I cant install the app, giving me "there a problem pardon the package"
I have "unknown source selected", and I have downloaded 3 other times the app to make sure there was no problem...
Can someone help me, m
Thank

frumy said:
yes, but if u ever do a factory reset will not work anymore...with knox 0x1
Click to expand...
Click to collapse
i made it twices to test the latest build nougat , is the same , every day in gym i use SHealth... is ok .

mar_wu said:
Anyone having problem on step 11?
I cant install the app, giving me "there a problem pardon the package"
I have "unknown source selected", and I have downloaded 3 other times the app to make sure there was no problem...
Can someone help me, m
Thank
Click to expand...
Click to collapse
Have you enabled "Allow installation of apps from Unknown Sources"?
Have you tried re-downloading the app? It may have corrupt whilst downloading.

CuBz90 said:
Have you enabled "Allow installation of apps from Unknown Sources"?
Have you tried re-downloading the app? It may have corrupt whilst downloading.
Click to expand...
Click to collapse
Thanks for the reply...
Yes set for installation from unknown sources...
Yesterday after many hours of playing... I remembered about permission setting...
So I set to
RW
R
R
Restarted, and boom. Done!
Thanks, works great, now I have S health. Again

I have 5.4.1

CuBz90 said:
As some of you will know, Samsung have no longer allowed S-Health to work on devices where Knox has been tripped.
This guide will show you how to get the latest version of S-Health to run without this block
This method requires you to be rooted. You can always unroot after doing this
You can now use S-Health even with tripped Knox!!
Click to expand...
Click to collapse
Cool mate !!
Working

Should we have the device rooted? true? The only one nougat rom i have is a stock no rooted. No way to install Shealth from system/app because I´m don´t have root permissions on this folder

and how do root the device on nougat? I read in different threads that currently rooting the device leads to broken wifi and brightness-adjustment.
Can somebody provide us with a proper root guide or does a simple unroot fix these problems after installing S-Health???

deliyan said:
Should we have the device rooted? true? The only one nougat rom i have is a stock no rooted. No way to install Shealth from system/app because I´m don´t have root permissions on this folder
Click to expand...
Click to collapse
sirhC6 said:
and how do root the device on nougat? I read in different threads that currently rooting the device leads to broken wifi and brightness-adjustment.
Can somebody provide us with a proper root guide or does a simple unroot fix these problems after installing S-Health???
Click to expand...
Click to collapse
Flash TWRP in ODIN.
Then boot to TWRP and flash SuperSU-v2.79-SR3
To unroot, open the SuperSU app and select 'Full unroot'. S-health will still work as normal.
I use this root method and it works without causing any issues to the functionality of my phone.

CuBz90 said:
Flash TWRP in ODIN.
Then boot to TWRP and flash SuperSU-v2.79-SR3
To unroot, open the SuperSU app and select 'Full unroot'. S-health will still work as normal.
I use this root method and it works without causing any issues to the functionality of my phone.
Click to expand...
Click to collapse
Shealth working with your tip.thanks

[Guide][Pokemon go][gps spoof] Universal cheat method to gps spoof play pokemon go wi

Tried and tested on march/may security update and works
PLEASE HIT THE LIKE BUTTONS IF IT WORKS (WHICH IT DOES).
1. This first step was originally found by @deathdefiler and thought it might help people so I've presented a neat manual to get started spoofing.
You need to root your phone
dont matter if you use a autoroot oneclickroot or what ever you prefer
Because we will be deleting (or NOT as mentioned in step 2) root later.
Just make sure SuperSu(optional for cm/lineage users) and busybox is installed
after your phone is rooted and
busybox: https://play.google.com/store/apps/details?id=stericson.busybox
are installed
go to playstore and download this exactly
(GPS Joystick Fake GPS Location)
https://play.google.com/store/apps/details?id=com.theappninjas.gpsjoystick
by dev. The app ninjas
as while youre in playstore also download (/system/app mover Root) by dev. j4velin
https://play.google.com/store/apps/details?id=de.j4velin.systemappmover
now openup /system/app mover and search for fake gps joystick
tap it and choose yes or ok to move it to /system/app
At this point you should reboot your phone( MUST DO )!
Once your phone is rebooted you can unroot your phone
Even if you unroot Gps joystick will remain in /system/app
Now go into your phone location settings
Set location modus to Device only
I also set google location service off otherwise it will go back to high accuracy mode.
Now we can open Fake gps joystick and go to settings from menu in the top left corner
Make sure that these following options are on
". Enable System Mode
Disable Location Service
Enable A-GPS reset. "
Now Restart your device for changes to take effect
thats it now we can start fake gps choose location of your liking
open pokenmon go and start playing (make sure loction is on device only mode)
If you want your location to work back normal
for example playing pokemon go normal or use googlemaps
then open fake gps settings and make sure Disable location service is set to off
Reboot your device and your good to go
Note by @reis1996 : In settings menu change "Background Handler" to another value from default to remove the time lag between spoofs. It varies for different devices
DONATE IF I WAS HELPFUL
HERE

Optional step for users who want to keep root/run custom ROMs
NOTE: YOU HAVE TO HAVE A CM/LINEAGE BASED ROM FOR THIS STEP TO WORK
NO MAGISK!!! OR SUPERSU!!!
2. The next step is to temporarily disabled root but still have root access
*****NOUGAT USERS DON'T FLASH ANYTHING*****
Pokemon checks for root status and SELinux status
iSU is an app made @bhb27
Head over to the iSU thread and flash (for 6.0.1 and below as nougat just needs the app installed)
a)iSU kernal file. permissive if your selinux is already permissive / enforcing if your selinux is enforcing
You can check your seLinux status of your phone in settings>about phone.
https://forum.xda-developers.com/an...le-app-to-deactivate-activate-t3478348/page56
b)use the iSU app
To change your build.prop file of your phone
This makes the phone think its not rooted
In the prop editor in the app, set all values to green/safe.
Next set root deactivated and seLinux to enforcing.
The app has an inbuilt safety net checker to see if you pass safety net.
Note that you should toggle root and selinux status to pass safety net via the iSU app only.

as soon as i move gps fake location app to system it disappears, and i have no means to open it up. i did cf autoroot.
also i have galaxy s6, where do i find settings below.
Now go into your phone location settings
Set location modus to Device only
I also set google location service off

zayf said:
as soon as i move gps fake location app to system it disappears, and i have no means to open it up. i did cf autoroot.
also i have galaxy s6, where do i find settings below.
Now go into your phone location settings
Set location modus to Device only
I also set google location service off
Click to expand...
Click to collapse
Did you restart the phone after making the GPS a system app. RESTART IS A MUST AFTER MAKING ANY APP SYSTEM APP
OK a little more information would be nice. What ROM are you running? Android version? Stock?
My advice for now would be to use a system APP uninstaller and remove the app. Then use another app ( various apps are present in play store) to make the GPS app a system app. Then unroot

hi man i did everything u said and works perfect,i have motorola x force, LineageOS with root from magisk and android 7.1.

nyw said:
hi man i did everything u said and works perfect,i have motorola x force, LineageOS with root from magisk and android 7.1.
Click to expand...
Click to collapse
Did you remove root after making fake gps system? Magisk that is

Ky$h said:
Did you remove root after making fake gps system? Magisk that is
Click to expand...
Click to collapse
No,i actualy want root thats why i unlocked the bootloader in the first place.

Ky$h said:
Did you remove root after making fake gps system? Magisk that is
Click to expand...
Click to collapse
As mentioned in my second step use the iSU app

No root , no soft ban, 5.0-7.xx: https://forum.xda-developers.com/ap...-mock-root-t3623235/post72708198#post72708198

reis1996 said:
Tried and tested on march/may security update and works
PLEASE HIT THE LIKE BUTTONS IF IT WORKS (WHICH IT DOES).
1. This first step was originally found by @deathdefiler and thought it might help people so I've presented a neat manual to get started spoofing.
You need to root your phone
dont matter if you use a autoroot oneclickroot or what ever you prefer
Because we will be deleting (or NOT as mentioned in step 2) root later.
Just make sure SuperSu(optional for cm/lineage users) and busybox is installed
after your phone is rooted and
busybox: https://play.google.com/store/apps/details?id=stericson.busybox
are installed
go to playstore and download this exactly
(GPS Joystick Fake GPS Location)
https://play.google.com/store/apps/details?id=com.theappninjas.gpsjoystick
by dev. The app ninjas
as while youre in playstore also download (/system/app mover Root) by dev. j4velin
https://play.google.com/store/apps/details?id=de.j4velin.systemappmover
now openup /system/app mover and search for fake gps joystick
tap it and choose yes or ok to move it to /system/app
At this point you should reboot your phone( MUST DO )!
Once your phone is rebooted you can unroot your phone
Even if you unroot Gps joystick will remain in /system/app
Now go into your phone location settings
Set location modus to Device only
I also set google location service off otherwise it will go back to high accuracy mode.
Now we can open Fake gps joystick and go to settings from menu in the top left corner
Make sure that these following options are on
". Enable System Mode
Disable Location Service
Enable A-GPS reset. "
Now Restart your device for changes to take effect
thats it now we can start fake gps choose location of your liking
open pokenmon go and start playing (make sure loction is on device only mode)
If you want your location to work back normal
for example playing pokemon go normal or use googlemaps
then open fake gps settings and make sure Disable location service is set to off
Reboot your device and your good to go
Note by @reis1996 : In settings menu change "Background Handler" to another value from default to remove the time lag between spoofs. It varies for different devices
DONATE IF I WAS HELPFUL
HERE
Click to expand...
Click to collapse
I flashed lineage custom rom unrooted
But pokemon go still detects my root
And said game is not compatible with rom
What is the solution??
Sent from my H30-U10 using Tapatalk

MadMax0067 said:
I flashed lineage custom rom unrooted
But pokemon go still detects my root
And said game is not compatible with rom
What is the solution??
Click to expand...
Click to collapse
Please read my instructions carefully without asking doubts. You have to use an app called iSU. Link in the second post

reis1996 said:
Please read my instructions carefully without asking doubts. You have to use an app called iSU. Link in the second post
Click to expand...
Click to collapse
ISU is not supported by my ROM
Sent from my H30-U10 using Tapatalk
---------- Post added at 11:45 AM ---------- Previous post was at 11:43 AM ----------
ISU is not supported by my ROM
Sent from my H30-U10 using Tapatalk

I install as system app, reboot, but when i unroot, the app doesn't appear on screen but i checked to see if it's still in system/app and it is. If I root back, the app does appear on screen as system app.
Huawei P10 Stock ROM, Nougat 7.0

MusicHeat said:
I install as system app, reboot, but when i unroot, the app doesn't appear on screen but i checked to see if it's still in system/app and it is. If I root back, the app does appear on screen as system app.
Huawei P10 Stock ROM, Nougat 7.0
Click to expand...
Click to collapse
Does iSU work on your ROM? You won't need to remove root if you are using a Nougat ROM

MadMax0067 said:
I flashed lineage custom rom unrooted
But pokemon go still detects my root
And said game is not compatible with rom
What is the solution??
Click to expand...
Click to collapse
Have you installed busybox?
If you are using a custom ROM like lineage your build.prop values have to be changed.

MadMax0067 said:
ISU is not supported by my ROM
Sent from my H30-U10 using Tapatalk
---------- Post added at 11:45 AM ---------- Previous post was at 11:43 AM ----------
ISU is not supported by my ROM
Click to expand...
Click to collapse
You need to download an app to edit your build.prop file and you will need root for this.
3ctoolbox can edit the build.prop but you can use anything else.
Trying using the iSU app to just change the values only. Its a one click method by clicking the safe (green) button under props menu

reis1996 said:
Have you installed busybox?
If you are using a custom ROM like lineage your build.prop values have to be changed.
Click to expand...
Click to collapse
Have installed busybox
But what to change??
Sent from my H30-U10 using Tapatalk
---------- Post added at 05:09 PM ---------- Previous post was at 05:08 PM ----------
reis1996 said:
You need to download an app to edit your build.prop file and you will need root for this.
3ctoolbox can edit the build.prop but you can use anything else.
Trying using the iSU app to just change the values only. Its a one click method by clicking the safe (green) button under props menu
Click to expand...
Click to collapse
Sent from my H30-U10 using Tapatalk

reis1996 said:
Does iSU work on your ROM? You won't need to remove root if you are using a Nougat ROM
Click to expand...
Click to collapse
So you are saying that iSu can hide root from SN?

MadMax0067 said:
Have installed busybox
But what to change??
Click to expand...
Click to collapse
You need to make a clean flash again. Wipe data. Dalvik cache (not internal) flash ROM again.
DO NOT INSTALL BUSYBOX

MusicHeat said:
So you are saying that iSu can hide root from SN?
Click to expand...
Click to collapse
Yes. If you are on nougat just install the app and don't flash anything. You will then have to toggle root and selinux status through that app only