[Guide][Pokemon go][gps spoof] Universal cheat method to gps spoof play pokemon go wi

[Guide][Pokemon go][gps spoof] Universal cheat method to gps spoof play pokemon go wi - Android Apps and Games

Tried and tested on march/may security update and works
PLEASE HIT THE LIKE BUTTONS IF IT WORKS (WHICH IT DOES).
1. This first step was originally found by @deathdefiler and thought it might help people so I've presented a neat manual to get started spoofing.
You need to root your phone
dont matter if you use a autoroot oneclickroot or what ever you prefer
Because we will be deleting (or NOT as mentioned in step 2) root later.
Just make sure SuperSu(optional for cm/lineage users) and busybox is installed
after your phone is rooted and
busybox: https://play.google.com/store/apps/details?id=stericson.busybox
are installed
go to playstore and download this exactly
(GPS Joystick Fake GPS Location)
https://play.google.com/store/apps/details?id=com.theappninjas.gpsjoystick
by dev. The app ninjas
as while youre in playstore also download (/system/app mover Root) by dev. j4velin
https://play.google.com/store/apps/details?id=de.j4velin.systemappmover
now openup /system/app mover and search for fake gps joystick
tap it and choose yes or ok to move it to /system/app
At this point you should reboot your phone( MUST DO )!
Once your phone is rebooted you can unroot your phone
Even if you unroot Gps joystick will remain in /system/app
Now go into your phone location settings
Set location modus to Device only
I also set google location service off otherwise it will go back to high accuracy mode.
Now we can open Fake gps joystick and go to settings from menu in the top left corner
Make sure that these following options are on
". Enable System Mode
Disable Location Service
Enable A-GPS reset. "
Now Restart your device for changes to take effect
thats it now we can start fake gps choose location of your liking
open pokenmon go and start playing (make sure loction is on device only mode)
If you want your location to work back normal
for example playing pokemon go normal or use googlemaps
then open fake gps settings and make sure Disable location service is set to off
Reboot your device and your good to go
Note by @reis1996 : In settings menu change "Background Handler" to another value from default to remove the time lag between spoofs. It varies for different devices
DONATE IF I WAS HELPFUL
HERE

Optional step for users who want to keep root/run custom ROMs
NOTE: YOU HAVE TO HAVE A CM/LINEAGE BASED ROM FOR THIS STEP TO WORK
NO MAGISK!!! OR SUPERSU!!!
2. The next step is to temporarily disabled root but still have root access
*****NOUGAT USERS DON'T FLASH ANYTHING*****
Pokemon checks for root status and SELinux status
iSU is an app made @bhb27
Head over to the iSU thread and flash (for 6.0.1 and below as nougat just needs the app installed)
a)iSU kernal file. permissive if your selinux is already permissive / enforcing if your selinux is enforcing
You can check your seLinux status of your phone in settings>about phone.
https://forum.xda-developers.com/an...le-app-to-deactivate-activate-t3478348/page56
b)use the iSU app
To change your build.prop file of your phone
This makes the phone think its not rooted
In the prop editor in the app, set all values to green/safe.
Next set root deactivated and seLinux to enforcing.
The app has an inbuilt safety net checker to see if you pass safety net.
Note that you should toggle root and selinux status to pass safety net via the iSU app only.

as soon as i move gps fake location app to system it disappears, and i have no means to open it up. i did cf autoroot.
also i have galaxy s6, where do i find settings below.
Now go into your phone location settings
Set location modus to Device only
I also set google location service off

zayf said:
as soon as i move gps fake location app to system it disappears, and i have no means to open it up. i did cf autoroot.
also i have galaxy s6, where do i find settings below.
Now go into your phone location settings
Set location modus to Device only
I also set google location service off
Click to expand...
Click to collapse
Did you restart the phone after making the GPS a system app. RESTART IS A MUST AFTER MAKING ANY APP SYSTEM APP
OK a little more information would be nice. What ROM are you running? Android version? Stock?
My advice for now would be to use a system APP uninstaller and remove the app. Then use another app ( various apps are present in play store) to make the GPS app a system app. Then unroot

hi man i did everything u said and works perfect,i have motorola x force, LineageOS with root from magisk and android 7.1.

nyw said:
hi man i did everything u said and works perfect,i have motorola x force, LineageOS with root from magisk and android 7.1.
Click to expand...
Click to collapse
Did you remove root after making fake gps system? Magisk that is

Ky$h said:
Did you remove root after making fake gps system? Magisk that is
Click to expand...
Click to collapse
No,i actualy want root thats why i unlocked the bootloader in the first place.

Ky$h said:
Did you remove root after making fake gps system? Magisk that is
Click to expand...
Click to collapse
As mentioned in my second step use the iSU app

No root , no soft ban, 5.0-7.xx: https://forum.xda-developers.com/ap...-mock-root-t3623235/post72708198#post72708198

reis1996 said:
Tried and tested on march/may security update and works
PLEASE HIT THE LIKE BUTTONS IF IT WORKS (WHICH IT DOES).
1. This first step was originally found by @deathdefiler and thought it might help people so I've presented a neat manual to get started spoofing.
You need to root your phone
dont matter if you use a autoroot oneclickroot or what ever you prefer
Because we will be deleting (or NOT as mentioned in step 2) root later.
Just make sure SuperSu(optional for cm/lineage users) and busybox is installed
after your phone is rooted and
busybox: https://play.google.com/store/apps/details?id=stericson.busybox
are installed
go to playstore and download this exactly
(GPS Joystick Fake GPS Location)
https://play.google.com/store/apps/details?id=com.theappninjas.gpsjoystick
by dev. The app ninjas
as while youre in playstore also download (/system/app mover Root) by dev. j4velin
https://play.google.com/store/apps/details?id=de.j4velin.systemappmover
now openup /system/app mover and search for fake gps joystick
tap it and choose yes or ok to move it to /system/app
At this point you should reboot your phone( MUST DO )!
Once your phone is rebooted you can unroot your phone
Even if you unroot Gps joystick will remain in /system/app
Now go into your phone location settings
Set location modus to Device only
I also set google location service off otherwise it will go back to high accuracy mode.
Now we can open Fake gps joystick and go to settings from menu in the top left corner
Make sure that these following options are on
". Enable System Mode
Disable Location Service
Enable A-GPS reset. "
Now Restart your device for changes to take effect
thats it now we can start fake gps choose location of your liking
open pokenmon go and start playing (make sure loction is on device only mode)
If you want your location to work back normal
for example playing pokemon go normal or use googlemaps
then open fake gps settings and make sure Disable location service is set to off
Reboot your device and your good to go
Note by @reis1996 : In settings menu change "Background Handler" to another value from default to remove the time lag between spoofs. It varies for different devices
DONATE IF I WAS HELPFUL
HERE
Click to expand...
Click to collapse
I flashed lineage custom rom unrooted
But pokemon go still detects my root
And said game is not compatible with rom
What is the solution??
Sent from my H30-U10 using Tapatalk

MadMax0067 said:
I flashed lineage custom rom unrooted
But pokemon go still detects my root
And said game is not compatible with rom
What is the solution??
Click to expand...
Click to collapse
Please read my instructions carefully without asking doubts. You have to use an app called iSU. Link in the second post

reis1996 said:
Please read my instructions carefully without asking doubts. You have to use an app called iSU. Link in the second post
Click to expand...
Click to collapse
ISU is not supported by my ROM
Sent from my H30-U10 using Tapatalk
---------- Post added at 11:45 AM ---------- Previous post was at 11:43 AM ----------
ISU is not supported by my ROM
Sent from my H30-U10 using Tapatalk

I install as system app, reboot, but when i unroot, the app doesn't appear on screen but i checked to see if it's still in system/app and it is. If I root back, the app does appear on screen as system app.
Huawei P10 Stock ROM, Nougat 7.0

MusicHeat said:
I install as system app, reboot, but when i unroot, the app doesn't appear on screen but i checked to see if it's still in system/app and it is. If I root back, the app does appear on screen as system app.
Huawei P10 Stock ROM, Nougat 7.0
Click to expand...
Click to collapse
Does iSU work on your ROM? You won't need to remove root if you are using a Nougat ROM

MadMax0067 said:
I flashed lineage custom rom unrooted
But pokemon go still detects my root
And said game is not compatible with rom
What is the solution??
Click to expand...
Click to collapse
Have you installed busybox?
If you are using a custom ROM like lineage your build.prop values have to be changed.

MadMax0067 said:
ISU is not supported by my ROM
Sent from my H30-U10 using Tapatalk
---------- Post added at 11:45 AM ---------- Previous post was at 11:43 AM ----------
ISU is not supported by my ROM
Click to expand...
Click to collapse
You need to download an app to edit your build.prop file and you will need root for this.
3ctoolbox can edit the build.prop but you can use anything else.
Trying using the iSU app to just change the values only. Its a one click method by clicking the safe (green) button under props menu

reis1996 said:
Have you installed busybox?
If you are using a custom ROM like lineage your build.prop values have to be changed.
Click to expand...
Click to collapse
Have installed busybox
But what to change??
Sent from my H30-U10 using Tapatalk
---------- Post added at 05:09 PM ---------- Previous post was at 05:08 PM ----------
reis1996 said:
You need to download an app to edit your build.prop file and you will need root for this.
3ctoolbox can edit the build.prop but you can use anything else.
Trying using the iSU app to just change the values only. Its a one click method by clicking the safe (green) button under props menu
Click to expand...
Click to collapse
Sent from my H30-U10 using Tapatalk

reis1996 said:
Does iSU work on your ROM? You won't need to remove root if you are using a Nougat ROM
Click to expand...
Click to collapse
So you are saying that iSu can hide root from SN?

MadMax0067 said:
Have installed busybox
But what to change??
Click to expand...
Click to collapse
You need to make a clean flash again. Wipe data. Dalvik cache (not internal) flash ROM again.
DO NOT INSTALL BUSYBOX

MusicHeat said:
So you are saying that iSu can hide root from SN?
Click to expand...
Click to collapse
Yes. If you are on nougat just install the app and don't flash anything. You will then have to toggle root and selinux status through that app only

Related

[4.3+] [Root] App Ops for Root (Version 1.1)

As you may know, Google has remove App Ops on Android 4.4.2. This app helps you to bring it back
Root device only for now
What is App Ops
App Ops is an activity, within the Settings app, that allows users to enable or disable operations on a per-app basis. These operations cover many common scenarios identified by permissions (e.g., read contacts, write contacts, access location), though it is not a pure one-to-one mapping.
Operations blocked by App Ops are inaccessible by the affected app, though that may vary by device.
Toggle-able permissions
- Access notifications
- Alarm volume
- Audio focus
- Bluetooth volume
- Call phone
- Camera
- Draw on top
- Keep awake
- Location
- Master volume
- Media buttons
- Media volume
- Modify calendar
- Modify call log
- Modify clipboard
- Modify contacts
- Modify settings
- Notification volume
- Play audio
- Post notification
- Read calendar
- Read call log
- Read clipboard
- Read contacts
- Read SMS/MMS
- Receive SMS/MMS
- Record audio
- Ring volume
- Send SMS/MMS
- Vibrate
- Voice volume
- Write SMS/MMS
Download
Google Play:
Free: https://play.google.com/store/apps/details?id=droidmate.appopsinstaller
Pro: https://play.google.com/store/apps/details?id=droidmate.appopsinstallerpro
Any feedback, report, please leave your comment.
Change logs
Ver 1.1
- Add uninstall AppOps
- Add update AppOps
- Fixed minor bugs
- Refine permission list
Ver 1.0
- Initial release

It's weird that this thread has no activity.. it's a proper mod tbh.

After clicking to "Install AppOps Root", the device reboots, but nothing seems to change. Starting the Installer again still shows the same message: "Click to install AppOps Root..."
If I click "Launch Stock App Ops", I see Settings that promptly closes.
I am rooted and running a 4.4.2 ROM.
What am I missing?

App is working great. But can you please change the Icon in the drawer? It is really hard to see with this dark grey color
gadgetguy08 said:
After clicking to "Install AppOps Root", the device reboots, but nothing seems to change. Starting the Installer again still shows the same message: "Click to install AppOps Root..."
If I click "Launch Stock App Ops", I see Settings that promptly closes.
I am rooted and running a 4.4.2 ROM.
What am I missing?
Click to expand...
Click to collapse
There are now two icons in the Drawer to choose. Select "AppOps Root"

haelmchen said:
There are now two icons in the Drawer to choose. Select "AppOps Root"
Click to expand...
Click to collapse
Not for me.
I have run through installation twice and didn't see any errors.

I just got prompted to d/l new firmware for my note 3 today. and after hearing they took this out. I declined it! keeping an eye on this, hopefully there will be a way to bring this back for non rooted devices. as my phone is only 2 months old. and I wana wait 4-6 months to make sure its not faulty B4 I go rooting it. plus there arent enough stable ROMS for note 3 anyway. I like Wanam as its stock ish without bloat. so waiting for wanam!

Reboot after install
Im using CM11.0 and the phone reboots after I click "Install AppOps Root" but seems to work fine with the "Lauch Stock AppOps" option.
Good job. Thank you.

Works great for me running Stock 4.4.2 on Nexus 5.

Can i use this app with ART?
Gesendet von meinem Nexus 4 mit Tapatalk

[email protected] said:
Can i use this app with ART?
Gesendet von meinem Nexus 4 mit Tapatalk
Click to expand...
Click to collapse
It's working for me with ART

same here
gadgetguy08 said:
After clicking to "Install AppOps Root", the device reboots, but nothing seems to change. Starting the Installer again still shows the same message: "Click to install AppOps Root..."
If I click "Launch Stock App Ops", I see Settings that promptly closes.
I am rooted and running a 4.4.2 ROM.
What am I missing?
Click to expand...
Click to collapse
same for me. i can only run "Launch Stock AppOps", install method causes restart with no change. I can change permissions though, which is nice. (running codefirex ROM, android 4.3 on Oppo Find 5 - couldnt find app ops option in this ROM )
thanks developer

Awesome. I was looking for something like this.

As this changes this system files can we uninstall if we want? I have not installed it yet

Jarvis4 said:
As this changes this system files can we uninstall if we want? I have not installed it yet
Click to expand...
Click to collapse
It only installs one apk in /system/priv-app/
If you are rooted and have titanium backup or other toolbox you can easily uninstall it (titanium can uninstall system apps); second easiest option is to use ES File Explorer or other root file manager; other ways include adb shell commands (mount / rm), and finally another method that actually doesn't require root is via custom recovery that has a builtin file manager like twrp does... you would mount /system and delete the apk from /system/priv-app

sordna said:
It only installs one apk in /system/priv-app/
If you are rooted and have titanium backup or other toolbox you can easily uninstall it (titanium can uninstall system apps); second easiest option is to use ES File Explorer or other root file manager; other ways include adb shell commands (mount / rm), and finally another method that actually doesn't require root is via custom recovery that has a builtin file manager like twrp does... you would mount /system and delete the apk from /system/priv-app
Click to expand...
Click to collapse
Thanks have titanium backup installed, will just use that if I want to uninstall, good to know for other root apps that I might use in the future
:good:

How does this compare to the likes of XPrivacy. It appears this completely denies the permission which would cause certain apps to crash vs providing random false data.

SilentSummer said:
How does this compare to the likes of XPrivacy. It appears this completely denies the permission which would cause certain apps to crash vs providing random false data.
Click to expand...
Click to collapse
XPrivacy is way more powerful and allows you to revoke many more permissions, but App Ops although limited, works quite well. You cannot remove network access with it, but I removed location, contacts, vibrate, camera, from some apps, and none crashed so far. I've been using App Ops since it was introduced in Jelly Bean, and still do in KitKat.

Jarvis4 said:
As this changes this system files can we uninstall if we want? I have not installed it yet
Click to expand...
Click to collapse
Version 1.1 is out which supports to unisntall App Ops.

safet.me said:
Version 1.1 is out which supports to unisntall App Ops.
Click to expand...
Click to collapse
I still get a quick reboot and nothing else.
On 4.4.2, rooted and have given the app SuperUser privileges.

gadgetguy08 said:
I still get a quick reboot and nothing else.
On 4.4.2, rooted and have given the app SuperUser privileges.
Click to expand...
Click to collapse
If it works, you should see a new app named "App Ops [Root]" in your app drawer. Anyway, which is your ROM?

Ways to Root your Samsung Galaxy Tab 4

Ways to root your Samsung Galaxy Tab 4 7.0All of the guys on the list is tested by me and it's working
For those guys who can't root their tablet, this thread is the right place for you
1. This is the Easiest Way to Root your tablet
KingRoot App Download it here
http://www.appsandroidapk.com/apk/kingroot-v4-6-2-apk-file-for-android/
Download the app
Before installing it Go to Settings > General Tab > Security > and Enable "Unknown Sources"
Install the app and Root your phone.
You might wanting to have a SuperSU instead of kingroot's SU
Google it SuperSU Me Download the latest version or you can find it here in this link
http://forum.xda-developers.com/general/paid-software/supersu-please-t3110954
Update the SUBinary
Reboot
2. KingoRoot App apk version
Download Link
https://root-apk.kingoapp.com/
Download the app
Before installing it Go to Settings > General Tab > Security > and Enable "Unknown Sources"
Set your device atleast 10 minutes before sleep due to inactivity
Install and Root your Device
Do nothing while rooting "Like tapping or bringing down the notification bar" this is why i make you set the 10minute-sleep
1st/2nd attempt might fail but on the other hand it will succeed
You might wanting to have a SuperSU instead of kingoroot's SU
Google it SuperSU Me Download the latest version or you can find the link here
http://forum.xda-developers.com/general/paid-software/supersu-please-t3110954
Update the SUBinary
Reboot
3. Root Using TWRP (old)
Requirements
TWRP link is here
http://forum.xda-developers.com/attachment.php?attachmentid=3128455&d=1421957427
Important: Odin3 v1.85 Direct download Link
http://forum.xda-developers.com/attachment.php?attachmentid=581913
PC
On your pc Open Odin3 v1.85
Click PDA and choose the tar file that you've downloaded
Tick Auto Reboot and F. Reset time
Now go to your device, Boot into download mode ( Power it off wait until it vibrates then press Home,Power and Volume Down Simultaneously)
Plug your device into your Computer (Install drivers here's the link http://www.mediafire.com/download/o3exocwabcxax3b/SAMSUNG_USB_Driver.exe)/ Some Pc install drivers automatically just wait them to install or if you already install the drivers skip driver installation procedure)
Click Start if the Odin detects your phone, your phone will automatically reboot
Now Boot your phone into Recovery Mode by (Turning it off and Press Power + Home + Volume up)
It will boot into TWRP
Press Reboot > System and it will ask you if you want to get root and swipe it to install
Update SuperSU and make another reboot
You can also update your TWRP using this zip file
https://www.androidfilehost.com/?fid=24052804347818249
Now if you really can't root your tablet and you're desperate, try another version of your stock firmware, you can find your stock firmware on Google, after that do this procedure again
Done.
Other Links to make your tab Rooted
http://forum.xda-developers.com/showthread.php?t=3111934
http://forum.xda-developers.com/tab-4/help/twrp-install-twrp-root-samsung-galaxy-t3095736
Developers that has credit on all of this
@BRoy_98
@pinksworld
@gatesjunior
and sorry if i haven't mentioned the others, i dont know who to give credits
SORRY SOME OF MY ENGLISH IS REALLY BAD

Yay another one, I think this is the fourth of this same exact thread
You might want to mention how kingroot/kingoroot send your personal data to Chinese servers and the twrp builds you linked to only work fur the SM-T230, SM-T230NU, and SM-T231, and will not work for any of the several other Tab 4 7" variants

Just imagine that I just put all those threads together ahaha: )

thisisapoorusernamechoice said:
Yay another one, I think this is the fourth of this same exact thread
You might want to mention how kingroot/kingoroot send your personal data to Chinese servers and the twrp builds you linked to only work fur the SM-T230, SM-T230NU, and SM-T231, and will not work for any of the several other Tab 4 7" variants
Click to expand...
Click to collapse
I dunno if that issue is real, but no worries we have supersu me

thisisapoorusernamechoice said:
Yay another one, I think this is the fourth of this same exact thread
You might want to mention how kingroot/kingoroot send your personal data to Chinese servers and the twrp builds you linked to only work fur the SM-T230, SM-T230NU, and SM-T231, and will not work for any of the several other Tab 4 7" variants
Click to expand...
Click to collapse
I dont think that if you install first supersu me and then kingroot your tab, after root turn wifi off and use supersu me, no data sent to anyone........ anyways it doesnt send your passowords etc to china, just like browser data and few app datas.... but theres no way to get passwords.... all are crypted or hidden well in smali

thelous said:
I dont think that if you install first supersu me and then kingroot your tab, after root turn wifi off and use supersu me, no data sent to anyone........ anyways it doesnt send your passowords etc to china, just like browser data and few app datas.... but theres no way to get passwords.... all are crypted or hidden well in smali
Click to expand...
Click to collapse
I wouldn't be sure about that. If you type in your password, once rooted, anything can easily capture the keyboard input and log it or send it out. Let me elaborate. It's like the guys who say, "Hey I have a firewall installed so it cannot communicate out." Yeah, o.k., so all the firewalls do is manage IPTABLES, so if I am an application and have root access, I can do what I want to avoid your firewall rules quite easily. Just a thought.

Hmm, updating the binary will remove the @#$%&* thing , we're just going to use the app to root our phone, and I guess wiping cache and dalvik is necessary

BTW tab 4 is best for gaming because of it looks and size but due to a stupid Samsung company, 1.2ghz + vivante gc1000 expect lagging, I hope some kind hearted will make a custom kernel for overclocking this tab.

BTW There's no Tex plugin on gltools, installing default will not work, so you have to find a cracked version of gltools, well if you do that... R.I.P expect force closes

gatesjunior said:
I wouldn't be sure about that. If you type in your password, once rooted, anything can easily capture the keyboard input and log it or send it out. Let me elaborate. It's like the guys who say, "Hey I have a firewall installed so it cannot communicate out." Yeah, o.k., so all the firewalls do is manage IPTABLES, so if I am an application and have root access, I can do what I want to avoid your firewall rules quite easily. Just a thought.
Click to expand...
Click to collapse
Well i didnt say anything about firewalls i was daying if you manually disable wifi and use king root, it wont be able to connect anywhere to send any data.... also you can search by date and time files made during root session and remove everything to prevent any keyloger to work

Have ODIN and a stock image ready!!!
Be careful with this root process! The sm-t237p 5.1.1 OH7 boot loops and won't hold the root or Philz recovery... Yet!:cyclops:

thelous said:
Well i didnt say anything about firewalls i was daying if you manually disable wifi and use king root, it wont be able to connect anywhere to send any data.... also you can search by date and time files made during root session and remove everything to prevent any keyloger to work
Click to expand...
Click to collapse
No. I can easily change the file and date stamp to match any given system file you already have so that it is not easy to find. Also, Kingroot will not run correctly and root your device properly if it cannot contact it's servers to download the proper exploit for your device. Now, if you are talking about disabling wifi only so that Kingroot cannot contact it's servers after you are rooted, well, if you use any data what so ever, it can use that same data connection. As an example, I have to have data of some type to login to my bank site, etc..

SM-T237P Specific maybe others with PhilZ recovery...
Root Success! Check this out... http://forum.xda-developers.com/showpost.php?p=64182938&postcount=15

gatesjunior said:
No. I can easily change the file and date stamp to match any given system file you already have so that it is not easy to find. Also, Kingroot will not run correctly and root your device properly if it cannot contact it's servers to download the proper exploit for your device. Now, if you are talking about disabling wifi only so that Kingroot cannot contact it's servers after you are rooted, well, if you use any data what so ever, it can use that same data connection. As an example, I have to have data of some type to login to my bank site, etc..
Click to expand...
Click to collapse
Well, atleast my bank account cant be logged with different ip and if its tried i recice message wheres code that you need write to bank website to access account.... however i havent lodt any accounts yet after rooting with kingroot, it has so manynusers that they cant check all information they recive, just like facebook and whatsapp... (they're spying watnu do but they have too many users so it would take like unlimited time to check all accounts and keybindings thru.....

K94U said:
Root Success! Check this out... http://forum.xda-developers.com/showpost.php?p=64182938&postcount=15
Click to expand...
Click to collapse
You can use any kind of cwm to flash a zip file that can root your device, This was an alternative way, just find a cwm to flash hehe

Siegharf said:
You can use any kind of cwm to flash a zip file that can root your device, This was an alternative way, just find a cwm to flash hehe
Click to expand...
Click to collapse
Flashing recovery trips KNOX (no warranty or OTA updates) and the other method sometimes doesn't... Also, the recovery/zip method stopped working on lollipop and marshmallow with the older SuperSU builds but... Chainfire has a new BETA SuperSU 2.6X that is a systemless root and now working on the newer Android builds using the recovery/zip method. This seems to work for mostly ALL Samsung and Nexus devices... Read about it here:
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
I restored my nandroid backup in recovery just to try this on my sm-t237p lollipop and it worked the first time!!! All apps get root access OK except es file explorer(now bloatware anyway)... You might need to install busybox for things to work... :good: :laugh:

K94U said:
Flashing recovery trips KNOX (no warranty or OTA updates) and the other method sometimes doesn't... Also, the recovery/zip method stopped working on lollipop and marshmallow with the older SuperSU builds but... Chainfire has a new BETA SuperSU 2.6X that is a systemless root and now working on the newer Android builds using the recovery/zip method. This seems to work for mostly ALL Samsung and Nexus devices... Read about it here:
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
I restored my nandroid backup in recovery just to try this on my sm-t237p lollipop and it worked the first time!!! All apps get root access OK except es file explorer(now bloatware anyway)... You might need to install busybox for things to work... :good: :laugh:
Click to expand...
Click to collapse
There's kies or custom ota flashing

K94U said:
Flashing recovery trips KNOX (no warranty or OTA updates) and the other method sometimes doesn't... Also, the recovery/zip method stopped working on lollipop and marshmallow with the older SuperSU builds but... Chainfire has a new BETA SuperSU 2.6X that is a systemless root and now working on the newer Android builds using the recovery/zip method. This seems to work for mostly ALL Samsung and Nexus devices... Read about it here:
http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
I restored my nandroid backup in recovery just to try this on my sm-t237p lollipop and it worked the first time!!! All apps get root access OK except es file explorer(now bloatware anyway)... You might need to install busybox for things to work... :good: :laugh:
Click to expand...
Click to collapse
235 LTE 5.1.1 rooted as well
http://forum.xda-developers.com/showpost.php?p=64255121&postcount=1
(not spamming in case anyone got the idea)

[Guide] How to use latest S-Health on devices with Knox tripped (0x1)

As some of you will know, Samsung have no longer allowed S-Health to work on devices where Knox has been tripped.
This guide will show you how to get the latest version of S-Health to run without this block
Rooted Devices
This method requires you to be rooted. You can always unroot after doing this
If you are not rooted you can root your device by following the instructions below:

Download TWRP and save it somewhere you will remember.
Open ODIN and press AP then select the TWRP file you just downloaded.
Put your phone into Download Mode by holding Power + Volume Down + Home.
Connect your phone to your computer using a USB cable. Then Press Start in ODIN.
Download SuperSU-v2.79-SR3 and save it to your phone's SD Card.
Power off the phone and then hold Power + Volume Up + Home to boot to TWRP.
Press Install and locate the SuperSU file you downloaded earlier. Select it and Install.
You are now rooted.
To remove root, simple open the SuperSU app from your app drawer, go to settings and select Full Unroot

Follow the steps below to remove the S-Health block.
Download a root file explorer (such as Root Explorer, Root Browser or ES File Explorer).
Open the root file explorer and go to the /system folder.
Open the file named build.prop in text editor
In the build.prop file look for ro.config.tima=1
Change this line to ro.config.tima=0, simply changing the 1 to a 0
Reboor phone
Run the S-Health app
Non-Rooted Devices
If you are not rooted and/or cannot root then you can follow the steps below to get S-Health working (this will only work if the app is not installed as a system app).
Uninstall the S-Health App (if you cannot uninstall the app, this means it is installed to the system partition. Try Method 2 below).
Install version 4 of the S-Health app which can be found HERE
Open the app and complete setup
Update the S-Health app via the app store
You should now be able to use the S-Health app without issue
You can now use S-Health even with tripped Knox!!
{Mod edit: Download links via a suspicious URL has been removed}

Cannot download your S Health 4.8.1. Clicking the link asks me to log in to Facebook but, when I do, I get Sorry, your request could not be processed. Please try again. Can you upload it somewhere else?

Wonderful! It worked!

Hi
I update to nougat today an checked if i can use s health abd i didn't notice any problem.......no Error....i can use it normally as i use to do....keep in mind that I already've lost the knox waranty and it tells me that i got the latest version of s health

norm2002 said:
Cannot download your S Health 4.8.1. Clicking the link asks me to log in to Facebook but, when I do, I get Sorry, your request could not be processed. Please try again. Can you upload it somewhere else?
Click to expand...
Click to collapse
Apologies. I have updated the link in the OP.
Hammoud Abbas said:
Hi
I update to nougat today an checked if i can use s health abd i didn't notice any problem.......no Error....i can use it normally as i use to do....keep in mind that I already've lost the knox waranty and it tells me that i got the latest version of s health
Click to expand...
Click to collapse
Ye some people don't seem to be locked out. I've no idea why.

CuBz90 said:
Apologies. I have updated the link in the OP.
Ye some people don't seem to be locked out. I've no idea why.
Click to expand...
Click to collapse
thank God then

My S health version is 5.4.1.0003. Working perfectly on Nougat. And have never had an issue with s health before.
Sent from my SM-G935F using XDA-Developers Legacy app

Shidapu said:
My S health version is 5.4.1.0003. Working perfectly on Nougat. And have never had an issue with s health before.
Sent from my SM-G935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Like I said, it works fine for some. This is for those that cannot access it.

Shidapu said:
My S health version is 5.4.1.0003. Working perfectly on Nougat. And have never had an issue with s health before.
Sent from my SM-G935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Also here works perfectly with knox 0x1

ManDone.vRs said:
Also here works perfectly with knox 0x1
Click to expand...
Click to collapse
yes, but if u ever do a factory reset will not work anymore...with knox 0x1

Anyone having problem on step 11?
I cant install the app, giving me "there a problem pardon the package"
I have "unknown source selected", and I have downloaded 3 other times the app to make sure there was no problem...
Can someone help me, m
Thank

frumy said:
yes, but if u ever do a factory reset will not work anymore...with knox 0x1
Click to expand...
Click to collapse
i made it twices to test the latest build nougat , is the same , every day in gym i use SHealth... is ok .

mar_wu said:
Anyone having problem on step 11?
I cant install the app, giving me "there a problem pardon the package"
I have "unknown source selected", and I have downloaded 3 other times the app to make sure there was no problem...
Can someone help me, m
Thank
Click to expand...
Click to collapse
Have you enabled "Allow installation of apps from Unknown Sources"?
Have you tried re-downloading the app? It may have corrupt whilst downloading.

CuBz90 said:
Have you enabled "Allow installation of apps from Unknown Sources"?
Have you tried re-downloading the app? It may have corrupt whilst downloading.
Click to expand...
Click to collapse
Thanks for the reply...
Yes set for installation from unknown sources...
Yesterday after many hours of playing... I remembered about permission setting...
So I set to
RW
R
R
Restarted, and boom. Done!
Thanks, works great, now I have S health. Again

I have 5.4.1

CuBz90 said:
As some of you will know, Samsung have no longer allowed S-Health to work on devices where Knox has been tripped.
This guide will show you how to get the latest version of S-Health to run without this block
This method requires you to be rooted. You can always unroot after doing this
You can now use S-Health even with tripped Knox!!
Click to expand...
Click to collapse
Cool mate !!
Working

Should we have the device rooted? true? The only one nougat rom i have is a stock no rooted. No way to install Shealth from system/app because I´m don´t have root permissions on this folder

and how do root the device on nougat? I read in different threads that currently rooting the device leads to broken wifi and brightness-adjustment.
Can somebody provide us with a proper root guide or does a simple unroot fix these problems after installing S-Health???

deliyan said:
Should we have the device rooted? true? The only one nougat rom i have is a stock no rooted. No way to install Shealth from system/app because I´m don´t have root permissions on this folder
Click to expand...
Click to collapse
sirhC6 said:
and how do root the device on nougat? I read in different threads that currently rooting the device leads to broken wifi and brightness-adjustment.
Can somebody provide us with a proper root guide or does a simple unroot fix these problems after installing S-Health???
Click to expand...
Click to collapse
Flash TWRP in ODIN.
Then boot to TWRP and flash SuperSU-v2.79-SR3
To unroot, open the SuperSU app and select 'Full unroot'. S-health will still work as normal.
I use this root method and it works without causing any issues to the functionality of my phone.

CuBz90 said:
Flash TWRP in ODIN.
Then boot to TWRP and flash SuperSU-v2.79-SR3
To unroot, open the SuperSU app and select 'Full unroot'. S-health will still work as normal.
I use this root method and it works without causing any issues to the functionality of my phone.
Click to expand...
Click to collapse
Shealth working with your tip.thanks

Pokemon Go Joystick!! (No allow mock, No root, No softbans, Nougat 7.x.x) 07/24/17

So, I've been toying around with this idea of getting a spoofing app into the system files without root and I finally did it!
Do not set as mock app, if it works you just need the settings below for GPS joystick. If you enabled mock app as GPS joystick you will rubberband (jump location).
Flash v2
Update in playstore
Setup settings below
Version 2: Click here (link fixed)
Pokemaps:
Singapore Pokémon and raid map
Philly Pokémon and Raid map
Pokémon and gym finder
This method requires TWRP recovery
Once install check to see if you are tripping safetynet (playstore checkers)
If so, just keep your stock recovery handly to flash in odin.
If not, well then you don't have to worried about changing back to stock (means you can flash this and other mods without tripping safetynet, such as bootanimations)
First download file and place on your phone
Next reboot into recovery and flash file
reboot
Next, (if needed) flash your stock recovery so you don't trip safeynet anymore.
Now, Open GPS Joystick
Click menu button and click settings
Turn on the following:
Enable Indirect Mocking
Enable System Mode
*Must Enable this option* Disable Location (Will need to disable and reboot if you need Maps or other gps app, but can enable and reboot to lock your spoofing location anytime)
Finally, after you turn all of those on reboot and open app and set location.
No jumping
No soft bans (unless you jump from new york to singapore in under 2.5 hours)
Full spoofing with no root needed!
Tested on Sprint s6 edge plus running Nougat.
All Sprint Samsung devices s5 and up should 100% work with this.
Screen Shots:
Screenshot 1
Screenshot 2
Screenshot 3
Screenshot 4
Download Links version 1:
Server 1
Server 2
Server 3

Dbzfan said:
So, I've been toying around with this idea of getting a spoofing app into the system files without root and I finally did it!
This method requires TWRP recovery
Once install check to see if you are tripping safetynet (playstore checkers)
If so, just keep your stock recovery handly to flash in odin.
If not, well then you don't have to worried about changing back to stock (means you can flash this and other mods without tripping safetynet, such as bootanimations)
First download file and place on your phone
Next reboot into recovery and flash file
reboot
Next, (if needed) flash your stock recovery so you don't trip safeynet anymore.
Now, Open GPS Joystick
Click menu button and click settings
Turn on the following:
Enable Indirect Mocking
Enable System Mode
*Must Enable this option* Disable Location (Will need to disable and reboot if you need Maps or other gps app, but can enable and reboot to lock your spoofing location anytime)
Finally, after you turn all of those on reboot and open app and set location.
No jumping
No soft bans (unless you jump from new york to singapore in under 2.5 hours)
Full spoofing with no root needed!
Download Links:
Server 1
Server 2
Server 3
Server 4
Server 5
Click to expand...
Click to collapse
Can work on custom roms??
Sent from my H30-U10 using Tapatalk

What does this have to do with Magisk?

MadMax0067 said:
Can work on custom roms??
If pokemon go does detect your rom /root, yes!
If your rom does have root, yes
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
Didgeridoohan said:
What does this have to do with Magisk?
Click to expand...
Click to collapse
I figured a lot of people are using magisk root to bypass the root check for pokemon go and this will work with out the need to be rooted.

Dbzfan said:
I figured a lot of people are using magisk root to bypass the root check for pokemon go and this will work with out the need to be rooted.
Click to expand...
Click to collapse
My rom is unrooted
Shoud i root it first
Sent from my H30-U10 using Tapatalk

A video tutorial would be great!

MadMax0067 said:
My rom is unrooted
Shoud i root it first
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
No, you just need to flash twrp as your recovery and flash zip, then just turn on those settings above, that's it. Your location will be locked anywhere you set it with no jumping at all. If your jumping you need to reboot after you turn on those settings. Pretty much with root you would move it to system but since safetynet is in place and blocks most root this will place the file in system from recovery with no root needed.

Dbzfan said:
No, you just need to flash twrp as your recovery and flash zip, then just turn on those settings above, that's it. Your location will be locked anywhere you set it with no jumping at all. If your jumping you need to reboot after you turn on those settings.
Click to expand...
Click to collapse
Lets hope it works
M really wanna play Pokemon go bt no poke desk at my place yet
Sent from my H30-U10 using Tapatalk

Dbzfan said:
So, I've been toying around with this idea of getting a spoofing app into the system files without root and I finally did it!
This method requires TWRP recovery
Once install check to see if you are tripping safetynet (playstore checkers)
If so, just keep your stock recovery handly to flash in odin.
If not, well then you don't have to worried about changing back to stock (means you can flash this and other mods without tripping safetynet, such as bootanimations)
First download file and place on your phone
Next reboot into recovery and flash file
reboot
Next, (if needed) flash your stock recovery so you don't trip safeynet anymore.
Now, Open GPS Joystick
Click menu button and click settings
Turn on the following:
Enable Indirect Mocking
Enable System Mode
*Must Enable this option* Disable Location (Will need to disable and reboot if you need Maps or other gps app, but can enable and reboot to lock your spoofing location anytime)
Finally, after you turn all of those on reboot and open app and set location.
No jumping
No soft bans (unless you jump from new york to singapore in under 2.5 hours)
Full spoofing with no root needed!
Download Links:
Server 1
Server 2
Server 3
Click to expand...
Click to collapse
Couldn't you just download the app from the Play Store? It's even a newer version...
https://play.google.com/store/apps/details?id=com.theappninjas.gpsjoystick&hl=en

Just to say this is working 100% on ViperOS 1.1 (7.1.2) on my Athene. Aka Moto G4 plus.. thanks!!

Is there any solution??
My custom rom is not rooted but game says your rom is not compatible...
Sent from my H30-U10 using Tapatalk

MadMax0067 said:
Is there any solution??
My custom rom is not rooted but game says your rom is not compatible...
Click to expand...
Click to collapse
What ROM?

ldiomedi said:
What ROM?
Click to expand...
Click to collapse
Lineage marshmallow
Sent from my H30-U10 using Tapatalk

MadMax0067 said:
Lineage marshmallow
Click to expand...
Click to collapse
Lineage it's pre rooted. You can enable or disable root in dev options. If you didn't remove the su binary from the system, then pogo will detect it.

ldiomedi said:
Lineage it's pre rooted. You can enable or disable root in dev options. If you didn't remove the su binary from the system, then pogo will detect it.
Click to expand...
Click to collapse
I have removed it before flashing it
But it still detects
Is there any other option to remove su binary??
Sent from my H30-U10 using Tapatalk

iSu

I'm guessing that after flashing the file it should appear without installing it from play store.For me it doenst install automatically after flashing.

One thing I noticed when trying to flash it on a Galaxy S7 with Android 6.0.1, is that it didn't like the app being put in priv-app
I recommend putting it in /system/app where it does work.

djb77 said:
One thing I noticed when trying to flash it on a Galaxy S7 with 6.0.1, is that it didn't like the app being put in priv-app
I recommend putting it in /system/app where it does work.
Click to expand...
Click to collapse
I checked through TWRP file manager to see if it installed in priv-app so i copied it(not moved) from there to /system/app but still doesn't work..
If i install root it will show it,but if i unroot it goes away but still stays in priv-app or system/app.
I'm on Nougat 7.0

Try this one instead

[Magisk Module] Nokia Extensions

Nokia Extensions!Telegram Group
This thread is discontinued. Future posts will be made here.
Module description
Why should the Chinese have all the fun? This module aims at porting features from the Chinese variants of Nokia phones to Global variants (Android One).
Features
1. AI Floating Ball
The phone will recommend relevant application shortcut settings according to your usage. You can also:
Use the custom shortcuts to customize the shortcut menu.
Use gestures to enrich your interaction with the phone.
2. Data speed indicator
Tested and working on Nokia 6, Nokia 8 and Nokia 7 plus on Oreo. After installation, go to Settings - Network & Internet - Data Usage and toggle Show data speed. Now you should be able to see your internet speed on your status bar.
3. Screenshot Plus
Take long screenshots, edit them on the go.
4. Screen Recorder
Supports FHD, HD and SD at 30 and 60 FPS, records audio too.
5. Junk Cleaner
Clears cache and junk files.
6. Task Manager
View and end a running task.
7. Smart Boost
Enjoy gaming without frame drops and hiccups!
8.. Virus scanner
Scan for virus and keep your phone secure.
9. NokiaPure fonts
Change your system font to NokiaPure
How to's
To install the module, flash the zip using Magisk manager or TWRP and reboot.
To uninstall the module, flash the same zip again and reboot.
To get the internet speed on the status bar, go to Settings - Network & Internet - Data Usage and toggle Show data speed.
To use Screenshot plus and Screen Recorder, add them to Quick Settings.
To open AI Floating Touch, Smart boost, Task manager, Junk Cleaner and Virus scan use NEX Launcher.
Compatibility
Nokia Phones
Magisk 17+
Android 8.1.0 and above
Download from Magisk Manager.
Source code: Github[/SIZE]
Credits
@topjohnwu for Magisk
@ahrion & @Zackptg5 for Unity template and Volume Key Selector
FIH/Evenwell/HMD Global (whoever it is) for making these apps

Changelog
v1
Initial release
v1.1
Added more features - Screenshot plus, Screen Recorder, System dashboard
Added NokiaPure fonts
v1.2
Added smart boost
fixed some FCs
v1.3
Merged Pie and Oreo files into a single package
Users can now select only the files they want to install using volume keys

How to use these apps? I am unable to use the apks after downloading.

yagyanshskumar said:
How to use these apps? I am unable to use the apks after downloading.
Click to expand...
Click to collapse
The Title shows that it's a Magisk Module. Means that you need to be rooted using Magisk

Akilesh T said:
Nokia Extensions!
Module description
Why should the Chinese have all the fun?
Click to expand...
Click to collapse
Haha, great!

maybe is not working on nokia 6 with magisk root which have locked bootloader

frnsl3 said:
maybe is not working on nokia 6 with magisk root which have locked bootloader
Click to expand...
Click to collapse
I guess you are using Magisk 16.1
This module requires Magisk 17+

ZeroPointMax said:
Haha, great!
Click to expand...
Click to collapse
These features could have been added by Nokia mobile itself if they wanted to. But they decided to keep it only for China, going with "Pure stock" Android for the rest of the markets. You can say that it might reduce the speed of the updates, but China variants have been getting updates at almost the same speed as the global variants. It would have been great if they had gone with something like OOS.

Akilesh T said:
I guess you are using Magisk 16.1
This module requires Magisk 17+
Click to expand...
Click to collapse
yep so sad, able rooting but not maximum potential and soft brick too often if we modify the system

frnsl3 said:
yep so sad, able rooting but not maximum potential and soft brick too often if we modify the system
Click to expand...
Click to collapse
Magisk is systemless

Akilesh T said:
Magisk is systemless
Click to expand...
Click to collapse
not talking about magisk there, i tell you about rooting

Unable to install
I have nokia 8. When i try to install this module, it says that my decvice is pixel Xl and refuses to install. I think this is because i have installed daydream enabler module. Is there a way to bypass the device check and proceed with installing this module?

audiophile55 said:
I have nokia 8. When i try to install this module, it says that my decvice is pixel Xl and refuses to install. I think this is because i have installed daydream enabler module. Is there a way to bypass the device check and proceed with installing this module?
Click to expand...
Click to collapse
Looks like that module edited your build.prop
You can bypass it. Extract the zip. Remove the device check part in install_module function inside the config.sh file. Rezip it and flash again

Akilesh T said:
Looks like that module edited your build.prop
You can bypass it. Extract the zip. Remove the device check part in install_module function inside the config.sh file. Rezip it and flash again
Click to expand...
Click to collapse
Can you tell me exactly which lines to remove? I try removing few lines but getting the same error. I am a noob at this. BTW, i also tried deleting the entire config.sh file and still I get the same error.
EDIT: My bad. I kept flashing the original zip and not extracted zip. All good now.

audiophile55 said:
Can you tell me exactly which lines to remove? I try removing few lines but getting the same error. I am a noob at this. BTW, i also tried deleting the entire config.sh file and still I get the same error.
EDIT: My bad. I kept flashing the original zip and not extracted zip. All good now.
Click to expand...
Click to collapse
You mustn't delete config.sh file
:good:

does this module work with other android one phones? im using xiaomi a2 lite @ oreo 8.1

How can i use ai floating? . I cant find where to activate it

cbkottege said:
How can i use ai floating? . I cant find where to activate it
Click to expand...
Click to collapse
Search for "touch" in settings. There'll be a result like "Hide in do not disturb apps". That'll take you to the AI floating button' settings

Hi. I am using nokia 8. After installation module and restart, i get smart tuner and data speed indicator force close, how to fix it sir?
(Sorry for my bad english)

zeronatdo said:
Hi. I am using nokia 8. After installation module and restart, i get smart tuner and data speed indicator force close, how to fix it sir?
(Sorry for my bad english)
Click to expand...
Click to collapse
Are you using the latest version (v1.3)?

Database Info

welcome