Related
Not being detected in Odin3 1.3, 1.83, 1.85, Drivers are installed properly, Tried in two systems and all USB ports, I had flashed UC V8, Was in MIUI and was updating when new updates were releasing through CW mode, Even had tried cm7 V2, now the USB mass storage isn't working, its just charging, and when i go to download mode and connect to system with Odin on, phone isn't detecting, USB Debugging is checked, Firewall and anti virus is off.
Working : CW mode, can flash through that.
Can not bear battery drain anymore in MIUI, so going back to Stock/Titanium.
My phone is Samsung Galaxy Sl I9003
Can you tell us what did u do before this happened?
First i was in stock KPN, then i flashed UC V8 and then through CW mode i flashed zip file of MIUI 9, then when update came, i had inatalled zip MIUI 10 through cw mode, then since there was heavy battery drain, i flashed cm 7.2, but since i used to like UI of MIUI and no change in battery drain, i flashed MIUI next version.. between this, i forgot till when i could do mass storage, but suddenly few days back it was just battery charging when i connect to sys, then i thought it will be fine if i go back to stock( also battery is better in that)/ thought to install titanium rom DDKP3, but now to do that, odin is not detecting device..
driver is installed properly, tried uninstalling and installing, tried in diff systems, diff cables, all the USB ports, but its just getting charged, USB Debugging is checked..
Help please..
recovery and downloading mode working.. i can also flash from zip files without any problem..
Re install...
RE
install drivers........kies
check ur ports....
download new odin.....
check ur usb cable....try ur friends..
nd finally if all is good...nd still nt working..
format ur windows..
Hope this helped
He tried on two systems, I guess its not Windows. When you connect your running device (not download mode) do you hear that typical device connected sound?
Sent from my GT-I9003 using XDA
YEAH...
Im in w7..
I also hear while in download mode.......also..dat tring
I guess it would be driver(kies)problem.....
Sure this would also work in download mode, but if she does, I wanted to ask whether she is able to communicate with the phone over adb or not...
If yes -> Some strange problem. Try to reinstall the drivers, but i think she has a low chance that this will work.
If no -> Probably the drivers are damaged?!? The system recognizes a usb device. Try a reinstall...
If she doesn't even hear a sound from her computer its something with the phone that probably only gets charged due to voltage on the usb port...
Sent from my GT-I9003 using XDA
Even i face this problem in MIUI. USB storage works occasionally for me. When it worked i had transferred CM7 rom.
USB works in CM7 but not in MIUI for me. So it isnt any driver problem on the pc.
my samsung galaxy s gt i9003 mt booting
my samsung galaxy s gt i9003 stop on booting screen hang on startup screen
When I tried to enter in "Recovery mode" it give followin massage:
Android system recovery <3e>
Enter : Ok Key, Select : Vol Up/ Vol Down
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
---------------------------------------------------------
E:failed to mount /data (no such file or directory)
--Copying media files...
Sucessfully copied media files.
# MANUAL MODE #
-- Appling Multi-CSS...
Installing Multi-CSS
Can't access to '/system/csc/INU/system/'.
Successfully applied multi-CSS.
and sometime When I tried to enter in "recovery mode" it give followin massage:
Android system recovery <3e>
Enter : Ok Key, Select : Vol Up/ Vol Down
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
---------------------------------------------------------
E:failed to mount /data (no such file or directory)
--Copying media files...
E:failed to mount /data (File exists)
E:copy_cache_media:Can't mount /sdcard
your storage not prepared yet, Please use UI menu for format and reboot action.
Media files copy failed.
# MANUAL MODE #
-- Appling Multi-CSS...
Installing Multi-CSS
Can't access to '/system/csc/INU/system/'.
Successfully applied multi-CSS.
its not detecting in odin also
someone help me plz
try to take away external sd card and sim i got the same problem on the original froyo rom and was unable to update the phone whitout pulling them out (both odin and kies was unable to recognize the phone but i was able to use it as mass storage)
Heya,
Since there is not enough info on the web regarding the rooting procedure for Videocon A55 HD and custom recovery for this awesomely smooth device, I'm uploading the necessary files and step by step guide. Hope it helps all the users of this device.
Remember rooting would tamper the warranty of the device and should be exercised carefully. The procedures mentioned below have been personally tested by me however I take no responsibility in case you ruin your device although I would be here to help you in such a scenario. Besides this the rooting script was not created by me and all the credit goes to the respective developer.
1. Rooting Procedure
Make sure you have enabled "USB Debugging" under Developer Options on your phone.
Keep your phone disconnected from computer via USB
a) Download and Install the ADB Interface driver for MTK 6589
Link to ADB Drivers
b) Download and extract the rooting package
Link to the Rooting Package
c) Now go to the extracted package and open a command prompt to that location as Administrator.
d) Type run.bat in Command Prompt and a message must appear "Press enter to root your phone..."
e) Press any key
f) Now after a few seconds the message should be " * daemon started successfully *"
g) Now connect your phone via USB to the computer
h) The cmd would automatically start pushing the necessary files onto your phone and when the process completes your phone will restart
Now you are rooted.To check install any Root checker application from playstore. Remember to grant permission while running Root Checker app when a pop up appears. It is suggested to update the SuperSU app from playstore and execute it at least once after that to update the su binary. You can also update the busybox package from playstore because busybox supplied with the rooting package is pretty old.
2. Installing CWM Recovery
Okie, since you are now rooted, most likely you would require a custom recovery to create full nandroid backups or test different ROMs. The CWM recovery provided here was created using MTKDroid Tools and is version 5.x (Non Touch). Again all credit goes to the developer of MTKDroid Tools for making such a powerful piece of software.
a) Download and extract the recovery package.
Link to CWM 5.x and Original Recovery for A55 HD
b) There are two files in the package , one is the custom CWM recovery and the other one is Stock Recovery (Names are pretty self understood)
c) Copy "Custom_Recovery_CWM_A55HD.img" to the root of your SD card
d) Rename it to "recovery.img"
e) Install Mobile Uncle Tools [MUT] from the playstore.
f) Open MUT and go to recovery update
g) Now you must see the recovery.img in a list. Just select it and follow the pop ups.
h) Now your phone would restart.
i) To check if the recovery update was successful, go to MUT and select "Reboot into Recovery" and your phone would most likely start in CWM recovery..
Alternative to get into recovery mode is to Press Power button + Volume Down key together when switched off.
3. Stock ROM for Videocon A55 HD
Okie, here we go, as I mentioned that I had got hold of the stock rom, so here I'm publishing it. The credit goes to Pratap Solunke (psolunke) for providing the Factory ROM zip.
I have just divided it into update.zip and files for SPFT for ease of downloading. Besides I have splitted each section into 4 parts and reuploaded it so you can download them at your ease. I'm providing the link for the whole folder which includes the changelog, update.zip and files for SPFT.
The ROM version is V7 (2013.07.15) which is different from the original ROM which was V5 (2013.06.08).
You can read the changelog for the updates in this ROM.
Link to ROM Folder
If using update.zip to flash this ROM, then
Step 1. Open the update.zip with winrar, Do not extract.
Step 2. Navigate to \META-INF\com\google\android\updater-script and extract this file only, then use "Notepad++" to open the file.Don't use default notepad.
Step 3. Delete assert(getprop("ro.product.device") == "A55HD" || getprop("ro.build.product") == "A55HD");
Step 4. Save the file, put it back to the same location in archive (It will take some time to add to archive)..Done...then proceed as usual.
a) update.zip is for reinstalling Factory Image of the ROM from recovery mode. The zip file is signed.
b) Files for SPFT are to be used with SP Flash Tool and can be used in case your phone is bricked. Do not flash the preloader unless you know what you are doing.
c) To download the files just go to the respective folder and right click on each file and hit download. After all four parts are downloaded, extract Part 1 of the downloaded splitted files and the files would be ready to be used as is.
d) Keep all four parts of the splitted files in a single folder and do not rename the splitted files.
If you have any questions related to A55 HD you can ask them here and I would try to help you the best way I can.
I'm still testing some custom ROMS but none seem to work . So far I've tested LEWA OS and MIUI ROM for xiacoao G6 Youth. However I'll keep trying and update once I have a working Custom ROM.
One more project in mind is to port Custom ROMS to A55 HD if none is available as is on the web.
If anyone of you is able to find a working Custom ROM for A55 HD kindly post it here so that we can have a repository of successful and useless attempts. I'm sure it would help others.
Rooting procedure worked after two attempts. The device is rooted.
While trying to install CWM recovery, get a problem. Can not see custom recovery in MUT. Pasted on both SD cards, internal and external also.
---------- Post added at 01:35 PM ---------- Previous post was at 01:34 PM ----------
Rooting procedure worked after two attempts. The device is rooted.
While trying to install CWM recovery, get a problem. Can not see custom recovery in MUT. Pasted on both SD cards, internal and external also. All the recoveries shown in the list are only remote recoveries
nanachitang420 said:
Rooting procedure worked after two attempts. The device is rooted.
While trying to install CWM recovery, get a problem. Can not see custom recovery in MUT. Pasted on both SD cards, internal and external also.
---------- Post added at 01:35 PM ---------- Previous post was at 01:34 PM ----------
Rooting procedure worked after two attempts. The device is rooted.
While trying to install CWM recovery, get a problem. Can not see custom recovery in MUT. Pasted on both SD cards, internal and external also. All the recoveries shown in the list are only remote recoveries
Click to expand...
Click to collapse
I forgot to mention , rename the recovery image to "recovery.img" and then put it in root of SD card and it would get detected by MUT...It will get detected instantly...Thankyou for bringing it to notice...Just updating the post...
done but some observations!!!!
DONE.
Some observations:
1. In CWM, cant see internal SD card. While, after mounting usb storage, can see external SD card only. NOTE, CANT SEE INTERNAL SD CARD ONLY WHEN TRY TO MOUNT INTERNAL PHONE STORAGE IN CWM. WHILE NORMAL WORKING NO PROBLEM.
2. Deleted.
3. Deleted.
4. Deleted,
5. Deleted.
6. The font size of Stock and CWM recovery is very small still it can serve the purpose.
Do any body have original/stock update.zip from Company?
Updates:
I think I figured out the problem with touch. Uninstalled an application called "Go Power Master" and the touch is ok even after connecting USB or charger. Thanks man. The phone is working very nice after rooting.
nanachitang420 said:
DONE.
Some observations:
1. In CWM, cant see internal SD card. While, after mounting usb storage, can see external SD card only.
2. After rooting, before even installing CWM, got some irratic behavior with touch. Like, while USB is connected, touch was not working as expected, it took long time to make USB storage active as after touching a specific required operation, like pulling down task bar it was doing something else like opening play store, opening game, or opening date and time settings. While unlocking lock screen, it was just opening any random phone application and is not even allowing to go back with back button or home button. Don't know this is related with what?
3. Irratic application were opening while touching different application but after removing USB, things were working better.
4. Rebooted in CWM and first tried to "fix permissions" to avoid that irratic touch behavior, thinking there was problem with permissions. Took nandroid back up, after fixing permissions. Wiped cache and dalvik cache and restarted.
5. Now, till now phone is not connected to PC with USB cable or connected to charging; it behaves better with touch but it is very troublesome to perform any operation after phone connected to PC with USB or to charger.
May be you have faced these issues or may not! Any suggested solution? Do any body have original/stock update.zip from Videocon?
Updates:
I think I figured out the problem with touch. Uninstalled an application called "Go Power Master" and the touch is ok even after connecting USB or charger. Thanks man.
Click to expand...
Click to collapse
For me the touch works without any problems...and as for detecting internal sd card...that also works flawlessly..i don't have the phone with me right now...Yesterday I was trying something and the nvram got corrupted [No baseband]...so right now it is resting at service center...Hope to get it next week...
One suggestion never install Carliv Touch Recovery on this phone...it messes with the baseband and display...Stick to this recovery until I build a more updated CWM...
Latest V-Store attached
Attached
nanachitang420 said:
Attached
Click to expand...
Click to collapse
Nice...let's make this thread a repository of A55 HD..And I have also got hold of the original update.zip and files for SPFT ...Will split them and upload to my google drive...and then share them..
update.zip
Aaaaanuj1 said:
Nice...let's make this thread a repository of A55 HD..And I have also got hold of the original update.zip and files for SPFT ...Will split them and upload to my google drive...and then share them..
Click to expand...
Click to collapse
The current version of my phone is 08062013. Can I flash this latest version through CWM and upgrade?
Tried to flash update.zip through CWM...
Installing: /sdcard/update.zip
Finding update package...
Opening update package....
Installing update....
assert failed: getprop("ro.product.device")=="A55HD" || getprop("ro.build.product")=="A55HD".
E: Error in /sdcard/update.zip
(Status 7)
Installation aborted...
Restored nandroid backup after this.
nanachitang420 said:
Installing: /sdcard/update.zip
Finding update package...
Opening update package....
Installing update....
assert failed: getprop("ro.product.device")=="A55HD" || getprop("ro.build.product")=="A55HD".
E: Error in /sdcard/update.zip
(Status 7)
Installation aborted...
Restored nandroid backup after this.
Click to expand...
Click to collapse
Okie it is an easy fix...
Step 1.Open the update.zip with winrar, Do not extract.
Step 2.Navigate to \META-INF\com\google\android\updater-script ,use "Notepad++" to open the file.Don't use default notepad.
Step 3.delete assert(getprop("ro.product.device") == "A55HD" ||
getprop("ro.build.product") == "A55HD");
Step 4.Save the file, update to archive..Done
Done
Successful.
Please add in above step 2 "to extract file Updater-script on PC" and then use N.........
Flashed modified update.zip from CWM and phone upgraded to version 15072013. To be strange it is showing v1.0 20130715 in build ie in about phone. All the applications were intact but lost root and also CWM recovery; then managed to root the phone and flash CWM with your fantastic guide.
After booting in CWM, wiped cache and dalvik cache(why? don't know). Phone is working nice. Thanks,
nanachitang420 said:
Successful.
Please add in above step 2 "to extract file Updater-script on PC" and then use N.........
Flashed modified update.zip from CWM and phone upgraded to version 15072013. To be strange it is showing v1.0 20130715 in build ie in about phone. All the applications were intact but lost root and also CWM recovery; then managed to root the phone and flash CWM with your fantastic guide.
After booting in CWM, wiped cache and dalvik cache(why? don't know). Phone is working nice. Thanks,
Click to expand...
Click to collapse
Nice...Yeah, people at Videocon forgot to change the version number i guess...and loss of root and cwm was due to restoring of system.img and recovery.img in the ROM file...so it's normal..
Besides one should always perform a clean install from CWM..i.e. Clear Data, Clear Cache, Clear Dalvik Cache, Format /system/ and then install ROMS..
And yes this ROM is a bit better then the one on phone..I received my phone today from service center and software was updated to this ROM..It felt much better .And the version was same , so this seems to be the latest ROM for A55 HD.. Enjoy
How to flash phone with sp flash tools
was trying to flash a recovery build on CWM site. I think it has spoiled baseband. No sim is getting detected. Any idea how to flash phone with SP tool? Don't have access to service station as am very far.
Edit: Managed to flash with SP tool. Used the files you have uploaded for SPFT. Selected all options and now phone is on and showing base band version, also sim are getting detected. The issue was preloader drivers for windows 8 which managed to install by disabling driver signature verification. Device rooted and installation of CWM through MUT was successful. Thanks.
Try this and this. Its as good as custom rom installation works very well with MTK6589
nanachitang420 said:
was trying to flash a recovery build on CWM site. I think it has spoiled baseband. No sim is getting detected. Any idea how to flash phone with SP tool? Don't have access to service station as am very far.
Edit: Managed to flash with SP tool. Used the files you have uploaded for SPFT. Selected all options and now phone is on and showing base band version, also sim are getting detected. The issue was preloader drivers for windows 8 which managed to install by disabling driver signature verification. Device rooted and installation of CWM through MUT was successful. Thanks.
Try this and this. Its as good as custom rom installation works very well with MTK6589
Click to expand...
Click to collapse
You must understand that the recovery partition is of 6 mb....and most likely the recovery you received from CWM online builder was more than 6 mb..hence your secro.img was also overwritten...hence the problems with baseband and imei....same thing happened with me 7 days back when I had to submit my phone to Service center. Unfortunately i didn't had the flash image then but it is good to know that it can also recover baseband and imei. And congrats for recovering your phone and I'm glad my contribution helps you...
Just remember one thing...if the boot, recovery,secro partitions are of more than 6mb then don't flash them as they would mess one thing or other...and hopefully you had disabled preloader in SPFT.....if not then from next time onwards please do it....because rarely you need to flash preloader...and a wrong flash can make your device a brick which can only be recovered by Test points.Hence never flash preloader until unless you know what you are doing.....And yes, I already use Gravity Box along with Xposed Framework...Great mod...Besides them I also use xhalofloatingwindow with bubble launcher and lwinrecent ...Both are xposed modules and work as expected.I also have init.d support which allows to make boot persistent changes on device....Along with that a few build.prop tweaks that take my ROM to the custom level...Let me know if you need any of this...
Please
Thanks for preloader advise. was not that much aware and will take care next time. Please share init.d support, build.prop tweaks and their usefulness.
For init.d, use term-init by ryuinferno.
http://forum.xda-developers.com/showthread.php?t=1933849
This is the link to the thread. Do not use zip-init or uni-init. Follow the guide on the thread. It works flawlessly.
Sent from my A55HD using Tapatalk
Which other phones has MTK6589 and same config ?
Tell me model number and brand, i will try to upload stock firmware.
it will help us built custom rom with custom features.
@anuj - Anyways if it brick again and need to send service center, please text me imei and location, i will make it done fast for you dear.:fingers-crossed:
Thank you Pratap bro. I'll let you know next time if I get to the point where I need to go to service center but I'm sure that with the ROM you provided I wouldn't need to go to one. And yes people you can ask for stock ROM from Pratap. He has excellent connections and can get you at least the Videocon ROM and may be others . Don't forget to thank him. Besides he is an excellent person who wouldn't shy away from helping you if he can. Ciao Pratap brother.
Sent from my A55HD using Tapatalk
Any new updates from Videocon for our A55HD?
File not found
File not found bro
Q&A for [Tipo][Tipo Dual][Miro][J]Clockworkmod[Locked/Unlocked Bootloader]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Tipo][Tipo Dual][Miro][J]Clockworkmod[Locked/Unlocked Bootloader]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
I format system partition and reboot before installing compatible ROM. CWM will also get erased during format,and usb not connet with system.
It only show sony symbol
What should i do?
Please help me...
dayalcalicut said:
I format system partition and reboot before installing compatible ROM. CWM will also get erased during format,and usb not connet with system.
It only show sony symbol
What should i do?
Please help me...
Click to expand...
Click to collapse
Did you install boot.img from other ROM??
Read this link first: http://xperiafirmware.com/2-uncategorised/30-androxyde-xperia-flashtool
2. Download flashtool from
http://www.firmwaremobile.com/index.php/xperiadownload/file/233-flashtool-9-2014
3. Download the firmware from
http://d-h.st/nCu
4. Install the flashtool in C:
5. Go to C:\flashtool\flashtool drivers and install the drivers
6. paste the ftf firmware file downloaded in step 3, to folder „Firmware“ included in the XPERIA Flashtool i.e. C:\flashtool\firmwares
7. open the XPERIA Flashtool, click on flash and choose downloaded firmware, than click ok. Important - if you do not want to delete any data of your phone, just uncheck flashing userdata.sin file. All data will remain in your phone, but sometimes it can cause additional troubles. So it is better (and I recommend that) to do the backup of your personal data, than proceed with clean instalation and then restore your personal data.
8.*turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button*
9. after few minutes all is done and your phone gets started
Hit thanks if it helped!! And tell me when it is done
help
I cant connect usb of phone with my pc,it shows any detected device.
Is can i use flash tool in this situation
dayalcalicut said:
I cant connect usb of phone with my pc,it shows any detected device.
Is can i use flash tool in this situation
Click to expand...
Click to collapse
Install the fastboot and flashmode drivers and then try again
plz clear. ma doubt..!!
Battery_charging
#!/system/xbin/sh
cat /dev/input/event2 > /dev/keycheck&
sleep 3
kill -9 $!
if [ -s /dev/keycheck -o -e /cache/recovery/boot ]
then
# fixing CPU clocks to avoid issues in recovery
echo 1008000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
echo 245000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
rm /cache/recovery/boot
# remount rootfs rw
mount -o remount,rw rootfs /
# Umount
## /data/idd
umount -l /dev/block/mmcblk0p15
## /data
umount -l /dev/block/mmcblk0p11
# Mount recovery partition
cd /
rm -r /sbin /sdcard
rm -f etc init* uevent* default*
if [ -f /system/bin/recovery.tar ]
then
tar -xf /system/bin/recovery.tar
fi
# Umount /system
umount -l /dev/block/mmcblk0p10
# chroot
chroot / /init
fi
# Continue booting
/system/bin/battery_charging_help $1
in this file what does that 3rd line implement
In my Xperia j I get a black screen
And in that file it is written that
"sleep 3"
is there any relationship between them??
ST23I Cannot Install ROM after Clockworkmod Install , any help appreciated
Hi all.
This 60 yr old bloke cant take stuff in too easy these days so please be patient with me.
I do the clockwork mod as in post #1
I check by turning phone ON and pressing down vol button . YES , It's now ROOTED and I get the options in clockwork-mod.
I clear cache and Delivik .
Now I try to install zip ( yes I put ..... http://forum.xda-developers.com/attachment.php?attachmentid=1702748&d=1359981583 ... Into my SD card , along with the gapps stripped.zip )
Unfortunately I I cannot get to the external_SD card as it is NOT mounted. I cannot even see it after I click "mount external-SD" .
To be truthful I am a little confused as to how I get a ROM either onto the Xperia ST23I internal memory or external SD card.
At one point I bricked it but used the sony PC companion and brought it back , I tried install CWM again and success but again have the same problem ... I cant get to the zips on external SD .
Any guidance would be appreciated , especially since I spent the last 3 days going round and round on forum threads.
Please explain ?
aksh1892 said:
Did you install boot.img from other ROM??
Read this link first: xxxxx
2. Download flashtool from xxxxx
3. Download the firmware from xxxxx
4. Install the flashtool in C:
5. Go to C:\flashtool\flashtool drivers and install the drivers
6. paste the ftf firmware file downloaded in step 3, to folder „Firmware“ included in the XPERIA Flashtool i.e. C:\flashtool\firmwares
7. open the XPERIA Flashtool, click on flash and choose downloaded firmware, than click ok. Important - if you do not want to delete any data of your phone, just uncheck flashing userdata.sin file. All data will remain in your phone, but sometimes it can cause additional troubles. So it is better (and I recommend that) to do the backup of your personal data, than proceed with clean instalation and then restore your personal data.
8.*turn off your phone and when Flashtool shows pop up window, connect phone to PC with holding volume down button*
9. after few minutes all is done and your phone gets started
Hit thanks if it helped!! And tell me when it is done
Click to expand...
Click to collapse
You say at No. 5 " Go to C:\flashtool\flashtool drivers and install the drivers " .
Please tell us how to do this ?
Mrstream said:
You say at No. 5 " Go to C:\flashtool\flashtool drivers and install the drivers " .
Please tell us how to do this ?
Click to expand...
Click to collapse
When you install Flashtool you'll have folder in Flashtool/drivers there is driver.exe just double click it select fastboot and flash drivers and install. If you have Windows 8/8.1 you'll have to disable signature verification first, search for it ther are plenty tutorials how to.
Xperia M2 D2303 on K.K. 4.4.4
Dzepar said:
When you install Flashtool you'll have folder in Flashtool/drivers there is driver.exe just double click it select fastboot and flash drivers and install. If you have Windows 8/8.1 you'll have to disable signature verification first, search for it ther are plenty tutorials how to.
Xperia M2 D2303 on K.K. 4.4.4
Click to expand...
Click to collapse
Hi, Thank you , your expalanation was very clear . Only problem is I do see all the drivers but there is none for ST23I which is my device.
If I look in Devices folder I DO see the ST23I folder ... BUT .. when I click in > C:\Flashtool\drivers then double click the ICON ( Flashtool-drivers ) it comes up with the options list and tick boxes yet my device is NOT shown . In fact NO ST devices are shown as options.
Still puzzled !
Mrstream said:
Hi, Thank you , your expalanation was very clear . Only problem is I do see all the drivers but there is none for ST23I which is my device.
If I look in Devices folder I DO see the ST23I folder ... BUT .. when I click in > C:\Flashtool\drivers then double click the ICON ( Flashtool-drivers ) it comes up with the options list and tick boxes yet my device is NOT shown . In fact NO ST devices are shown as options.
Still puzzled !
Click to expand...
Click to collapse
Just install sony pc companion.
Once installed , connect your phone in flashmode (green led) and it will install required drivers by itself.
Press the thumb up button on lower right hand corner of this post if I helped you.
Anupam_Dey said:
Just install sony pc companion.
Once installed , connect your phone in flashmode (green led) and it will install required drivers by itself.
Press the thumb up button on lower right hand corner of this post if I helped you.
Click to expand...
Click to collapse
Hi, I already have it installed and have used it several times ...... 2 times to unbrick and return to stock rom .
To be truthfull, I do appreciate your help but feel that I m out of my depth . Bit too old to take it all in .
I have clockwork installed but cannot get acces to any zips I put onto external SD . The problem is there is NO Boot image so I am still stuck with the stock rom. Even if I mount the External SD via CWM it does not give me access to external. I am trying to download the zips to the phone via my dropbox to phone internal memory . I will see how that goes. I am still messing , you never know I might just get lucky.
Once again ,thank you so much .
Emergency!
What i did is flash stock kernel with fusion kernel for Xperia miro. the phone won't boot. i reflashed stock kernel. in cwm i wiped system partition, cache, and dalvik cache and installed super jelly bean rom with stock kernel. upon reboot my phone is stuck in sony logo. i flashed fusion kernel again but no boot. lastly, i flashed stock kernel and is hung in bootloop. Can you hep me please. My stock rom is in sd card. if only i could acces it with cwm i'd restore my stock rom. please help me. thank you.
---------- Post added at 02:37 AM ---------- Previous post was at 02:23 AM ----------
Mrstream said:
Hi all.
This 60 yr old bloke cant take stuff in too easy these days so please be patient with me.
I do the clockwork mod as in post #1
I check by turning phone ON and pressing down vol button . YES , It's now ROOTED and I get the options in clockwork-mod.
I clear cache and Delivik .
Now I try to install zip ( yes I put ..... http://forum.xda-developers.com/attachment.php?attachmentid=1702748&d=1359981583 ... Into my SD card , along with the gapps stripped.zip )
Unfortunately I I cannot get to the external_SD card as it is NOT mounted. I cannot even see it after I click "mount external-SD" .
To be truthful I am a little confused as to how I get a ROM either onto the Xperia ST23I internal memory or external SD card.
At one point I bricked it but used the sony PC companion and brought it back , I tried install CWM again and success but again have the same problem ... I cant get to the zips on external SD .
Any guidance would be appreciated , especially since I spent the last 3 days going round and round on forum threads.
Click to expand...
Click to collapse
You said, "At one point I bricked it but used the sony PC companion and brought it back , I tried install CWM again and success". Can you please explain how did you do it?
HERE IS THE FIRST OFFICIAL
CWM FOR KARBONN TITANIUM S20
ORIGINAL BOOT N RECOVERY .IMG
join FB GROUP:::<ww.facebook.com/groups/323894334469784>
sTOCK ROM (SOON BE UPLOADING)
Site ::: karbonnts20.blogspot.in/
nEWBIE PROBLEM THATS WHY LINKS ARE NOT ALLOWED TO POST
Rooting KArbonn Titanium s20
#Requirements:
"I am not responsible if you brick your phone"
CWM recovery (Link)
SU & Binary files (Link)
Use SP Flasher v 5.0xx to flash (Link) .
Download the scatter file MT6582(Link)
#Procedure :
Open SP flasher and choose scatter file Mt6582_android_emmc.txt
Goto recovery link and choose the CWM recovery (downloaded).
Now connect your device in switch off Mode with its battery inside and Download it
Now open CWM by pressing Vol up+Power Key
Choose "Install zip from sd card" >Choose zip from Sd card > select the update SU.zip
Reboot and we are done rooting.
for links check the site!!
Repartition Internal SDCARD
As we know this device {MTK6582}comes with 4GB ROM with APP data to be 1GB and user Storage 1.59 GB.
Such small APP space cause a lots of problems Thus best way is to repartition it with HKRom Manager.
For links visit the site :-htp://karbonnts20.blogspot.in/
"I am not responsible if u brick your phone , dead internal sd or so n so .Better do it on your own risk"
Requisites:
Hk rom manager.apk
CWM /TPRW recovery
A full backup CWM or TPRW.
Procedure:
Before you proceed take a full CWM or TPRW backup as phone internal partition may not work or respond sometimes.
Now install the app
Open the app and select mt6582 fast runner (2nd option) ::it will be the only highlighted option .
Choose your required data size (say 2GB , its fine ) and hit apply and now wait.
It will show boot into recovery ,hit yes
After 3 mins you are done. ReBoot it
Now You have 1.8GB APP space and 540MB for storage
"Remember all your phone data will be lost as phone is re-partitioned and Formatted. "
thanks to XDA
Ways to extract stock rom
How to Extract Stock Rom {Detailed procedure with Video tutorial}
FOR LINKS PLEASE VISIT THE SITE :- []ttp://karbonnts20.blogspot.in/[/url]
"This Tutorial is applicable MTK devices "
Required :-
SP flasher- [ttp://sh.st/o9xC5[/url]
MTK Droid Tools- [tp://sh.st/o895X[/url]
Scatter file
ABD Drivers
Ways to extract stock rom:- Video Links
1.Case I:- "If you have a unrooted and no CWM ANDROID Phone with USB Debugging Enabled "
Tutorial Visit:- ttp://sh.st/ocUme[/url]
2. Case II :- An Android Phone having CWM (with or without Root)
Tutorial Visit:- ttp://sh.st/ocOaC[/url]
3. Case III :- "A rooted Android phone (with or without CWM) USB Debugging Enabled"
Tutorial Visit :- ttp://sh.st/ocOBw[/url]
Thanks to XDA , and the Developers
Procedure:-
Case-I :If you have a unrooted and no CWM ANDROID Phone with USB Debugging Enabled
First TURN ON the USB Debugging Option :: ie , Settings>Developer options>USB debugging and install ADB drivers
Start MTK Droid Tools <Provided above> ,Grant the USB debugging request and wait till device get discovered .
Then click on BLOCKs Map and you will get all partition and their length .Here you can create a scatter file also. and minimise the window .\, We would require the location later.
Then TURN OFF the phone . OPEN SP flasher , Choose the scatter file you made or provided in the link.
Then Goto READBACK tab and add a readback file ie ROM_0
Click on ROM_0 and choose the destination Folder .
Now a Box will open and ask for Start address and length ,SET it in hex and do the following
start address:0x0000000 and length 0x7FB80000 [The length of FAT as in scatter file] ,Remember if you want the length shown in block map then just ADD 0x [length] .
Now HIT readback. Connect the Phone using USB with battery inside the phone and wait till its get discovered and yellow bar will represent the work.
It would nearly take 30-45 mins and we got our ROM_0 file.
Again Turn ON the phone and connect with USB debugging ON.
Open Minimised MTK Droid tools and Goto Root,backup tab and Hit Process ROM_0.
It will ask to make CWM recovery from original recovery ,if u want CWM fro your phone here you can get it HIT Yes.
After Processing finished we will get our SP flashable STOCK Rom Files in mtkdroidtools>backup
Hence we are done . And In RESULT we get ,ScAtter File ,SP Flashable STOCK Rom images and CWM Recovery for the phone.
Thank You
Case II:-An Android Phone having CWM (with or without Root)
Here we get CWM Backup For Stock Rom which is good for Porting like purposes.
Keep 3 GB of space empty in SD card.
First Turn OFF the Phone and HOLD UP+ Power Key
Enter to Recovery Menu>Backup and Restore
Hit Backup
After it completes Goto SDCARD>CLOCKWORKMOD>BACKUP
Result we get CWM Backup of STOCK ROM which can be flashed By CWM on Hitting restore in Backup and Restore.
Case-III:-A rooted Android phone (with or without CWM) USB Debugging Enabled
Here we can get CWM recovery,SP Flashable Stock Rom and to work with Rom files.
Connect the phone phone to PC via USB and turn ON the USB Debugging.Keep 3GB SDcard Space
Then start MTK Droid Tools and let it detect your Phone.
Then Hit ROOT button just at Down right.
Let it connect to phone and Grant the SU Permission in the phone.
The yellow mark in down left corner will turn Green .
Goto Root, Backup Tab and Select userdata and cache in Bacup option.
Now hit Backup. It would take and hour or so.
Then click on" prepare blocks for flash tools" and wait .
After it Finishes you have CWM recovery,SP Flashable Stock Rom and to work with Rom files.
Mtkdroidtools>backups>"[Phone name]">!imagesfor flashtool
Hope it help You
Hit like and Share
Hi all,
i have xolo q3000 . i have twrp 2.8..5.0 as recovery. i wiped everything from dalvik/cache to system to cache to data to emmc .. i have miui 7.9.30 with its port path .... when i install the miui zip file it says corrupt file , i downloaded the file twice but still says "E:Zip file is corrupt!".
i downloaded xolo_q3000_KK_S007_2052014.zip
it (twrp) says zip signature verification failed
error flashing ip /sdcard/xolo_ the whole file mentioned above.
how should i proceed ... now that i dont have OS installed , when i plug the phone to my desktop it says USB device not recognized inspite of all the mediatek usb vcom file , android cdc file installed
i ran some software which changed the partition ... my /emmc partition now is 9GB. i cant find the other
7 GB, it must be somewhere!
Where is Mr. iammurugesh?
anandvoyager said:
Hi all,
i have xolo q3000 . i have twrp 2.8..5.0 as recovery. i wiped everything from dalvik/cache to system to cache to data to emmc .. i have miui 7.9.30 with its port path .... when i install the miui zip file it says corrupt file , i downloaded the file twice but still says "E:Zip file is corrupt!".
i downloaded xolo_q3000_KK_S007_2052014.zip
it (twrp) says zip signature verification failed
error flashing ip /sdcard/xolo_ the whole file mentioned above.
how should i proceed ... now that i dont have OS installed , when i plug the phone to my desktop it says USB device not recognized inspite of all the mediatek usb vcom file , android cdc file installed
i ran some software which changed the partition ... my /emmc partition now is 9GB. i cant find the other
7 GB, it must be somewhere!
Where is Mr. iammurugesh?
Click to expand...
Click to collapse
Hi....
Download stock rom,sp flash tool,vcom driver.
And remove battery and put it again (not start device only battery put)then connect device to pc during rom flashing.
First driver of mtk is installed properly then flash it
iammrugesh said:
Hi....
Download stock rom,sp flash tool,vcom driver.
And remove battery and put it again (not start device only battery put)then connect device to pc during rom flashing.
First driver of mtk is installed properly then flash it
Click to expand...
Click to collapse
i am so happy for the reply .... my concern at this point is your last statement
"First driver of mtk is installed properly then flash it".
i have installed every possible drivers related to mtk65xx , but my desktop wont detect the connect mobile with or without battery.. any idea ?... if you have time i can provide you teamviewer bro!. what you say...
anandvoyager said:
i am so happy for the reply .... my concern at this point is your last statement
"First driver of mtk is installed properly then flash it".
i have installed every possible drivers related to mtk65xx , but my desktop wont detect the connect mobile with or without battery.. any idea ?... if you have time i can provide you teamviewer bro!. what you say...
Click to expand...
Click to collapse
Pm me