Hello, here is my problem, I have a tablet GT-N8010 that remains blocked on the logo Samsung, I can not access the mode recovery (it displays the android logo then the tablet reboot) against the downloading mode I can access, odin Recognizes the tablet I tried several official rom but odin always shows me FAILED even with TWR in the recovery mode the tablet display :
Odin mode (in red)
Product name: GT-N8010
CURRENT BINARY: Custom
SYSTEM: Custom
RP swrev: A2 (gray)
Thank you for your help
At what point does Odin fail ??
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<<NAND Write fail > search the forum multiple posts .
Probable memory block failure .
Related
I got an over the air update from AT&T which I guess didn't go well because the settings app kept crashing. I had never done anything technical with the phone so I called them and they recommended doing a factory reset. I tried this and it didn't solve the problem and I was out of warranty so I decided to try and fix it myself. I have tried a few different methods of trying to get the phone to work with different md5 files but nothing has worked so far. I can get to download mode and recovery mode but nothing else. I tried putting version on called root66_ATT_I747UCDLK3.7z and got this error message (see below). This one seemed to get the furthest but I'm at a loss now. I believe I have already rooted the phone but at this point I don't care I just wanted to have a working phone.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> NON-HLOS.bin
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin mode
Product name:sgh-1747
Current binary :custom
System status: custom
Qualcom secureboot: enable
Warranty bit:1
Bootloader ap swrev: 3
Secure check fail: modem
shooter7788 said:
I got an over the air update from AT&T which I guess didn't go well because the settings app kept crashing. I had never done anything technical with the phone so I called them and they recommended doing a factory reset. I tried this and it didn't solve the problem and I was out of warranty so I decided to try and fix it myself. I have tried a few different methods of trying to get the phone to work with different md5 files but nothing has worked so far. I can get to download mode and recovery mode but nothing else. I tried putting version on called root66_ATT_I747UCDLK3.7z and got this error message (see below). This one seemed to get the furthest but I'm at a loss now. I believe I have already rooted the phone but at this point I don't care I just wanted to have a working phone.
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> NON-HLOS.bin
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Odin mode
Product name:sgh-1747
Current binary :custom
System status: custom
Qualcom secureboot: enable
Warranty bit:1
Bootloader ap swrev: 3
Secure check fail: modem
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble. Fortunately there is an XDA area dedicated to the AT&T Samsung Galaxy S3 at http://forum.xda-developers.com/galaxy-s3-att which would be a good starting place. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/galaxy-s3-att/help where the experts familiar with your device will be best able to guide you.
Good luck!
Hello,sorry for my english, I have a problem, my phone bootloop yesterday, and I can go to the recovery mode, so I was trying to flash the four parts of my firmware, but it was failed. in param.bin
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
So I try to install a recovery :
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Same problem...
But my downloading mod display :
ODIN MODE
PRODUCT NAME: SM-G925F
CURRENT BINARY: Custom
SYSTEM STATUT: Custom
REACTIVATION LOCK: OFF
Secure download: Enabled
KNOX WARRANTY VOID: 1 (0*0500)
AP SWAEV: B:5 K:2 S:2
KERNEL REV. CHECK FAIL. DEVICE:2, BINARY:1
I can't flashing anyway... I'm lost ! I tried with differents odin3 version, differents rom but always failed...
Please help me
Hi !
There are several threads on the Galaxy S6 Edge Q&A, Help & Troubleshooting
You may have a look here https://forum.xda-developers.com/galaxy-s6-edge/help/bricked-stuck-using-odin-root-t3077615
Important is to have a working Odin version and a good USB cable , if the original doesn`t work , they have a tendency to get damaged for data , use a different one
Good luck !
After flashing twrp-3.0.2-0-n801x.taz with Odin I can't acces Twrp Recovery.
Model: gt-n8013
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 7 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Power btt + volume up don't work fo me. How to acess recovery mode ?
You may have flashed a wrong TWRP or flash did not complete.
JJEgan said:
You may have flashed a wrong TWRP or flash did not complete.
Click to expand...
Click to collapse
what?
i flashed twrp.3.0.2-n801x.tar man
use another recovery man.
Suggest the one twrp.me has listed for your device.That's not the one you flashed.
JJEgan said:
use another recovery man.
Suggest the one twrp.me has listed for your device.That's not the one you flashed.
Click to expand...
Click to collapse
give link? I just found this one for download
www.twrp.me
imakaay said:
After flashing twrp-3.0.2-0-n801x.taz with Odin I can't acces Twrp Recovery.
Model: gt-n8013
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 7 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Power btt + volume up don't work fo me. How to acess recovery mode ?
Click to expand...
Click to collapse
If anyone has this happen after updating the rom you need to enable developer options and Settings developer options activate advanced restart
I am exactly getting the behaviour. No Matter what TWRP or other recovery I've tried to flash on my N8000, odin says successful, but no way to boot on the recovery.
I've tried almost all TWRP version available.
So I downloaded the stock firmware for this phone and I've tried to use odin to flash it. But, it will not flash. If anyone can help me, it would be greatly appreciated. Also, here is the script I got from odin when I try to flash.
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2365 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Koleman1312 said:
So I downloaded the stock firmware for this phone and I've tried to use odin to flash it. But, it will not flash. If anyone can help me, it would be greatly appreciated. Also, here is the script I got from odin when I try to flash.
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2365 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Boot your device into recovery mode and then factory reset then wipe cache partition, then power off the device, then boot into download mode and try flashing again.
Sent from my LGL84VL using Tapatalk
Droidriven said:
Boot your device into recovery mode and then factory reset then wipe cache partition, then power off the device, then boot into download mode and try flashing again.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
So I forgot to mention that’s the phone is stuck in emergency software mode and I can’t do thing. Also smart switch says the device isn’t supported
hey,
I have a problem with my Note 10 plus, i tried to install another firmware ( because i installed busybox and after i had bootloop); now an error shows on the screen " an error has occurred while updating the device software...." i understand that this is download mod ( i cant access download mod or recovery now).
The problem is that when i try to install the firmware with odin it starts but after a while fails, like down below:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 8172 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> dt.img
<ID:0/005> dtbo.img
<ID:0/005> system.img
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
What could i do?
Solved, set just the pit file with nand erese and repartition checked.