So I downloaded the stock firmware for this phone and I've tried to use odin to flash it. But, it will not flash. If anyone can help me, it would be greatly appreciated. Also, here is the script I got from odin when I try to flash.
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2365 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Koleman1312 said:
So I downloaded the stock firmware for this phone and I've tried to use odin to flash it. But, it will not flash. If anyone can help me, it would be greatly appreciated. Also, here is the script I got from odin when I try to flash.
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2365 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Boot your device into recovery mode and then factory reset then wipe cache partition, then power off the device, then boot into download mode and try flashing again.
Sent from my LGL84VL using Tapatalk
Droidriven said:
Boot your device into recovery mode and then factory reset then wipe cache partition, then power off the device, then boot into download mode and try flashing again.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
So I forgot to mention that’s the phone is stuck in emergency software mode and I can’t do thing. Also smart switch says the device isn’t supported
Related
Hello everybody
I recently flashed a custom ROM to my phone but i want to restore to stock ROM but nothing is working for me. i tried flashing with odin(FAILED) i tried emergency software and initialization(FAILED) EDIT: LOG from ODIN <ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase... <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
second try:
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> cm.bin
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> recovery.img
<ID:0/005> sboot.bin
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any suggestions?
iJabui said:
Hello everybody
I recently flashed a custom ROM to my phone but i want to restore to stock ROM but nothing is working for me. i tried flashing with odin(FAILED) i tried emergency software and initialization(FAILED) EDIT: LOG from ODIN <ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase... <ID:0/005> Get PIT for mapping.. <ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
second try:
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> cache.img
<ID:0/005> cm.bin
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> recovery.img
<ID:0/005> sboot.bin
<ID:0/005> system.img
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any suggestions?
Click to expand...
Click to collapse
I have got the same problem, As you did u find a good custom Rom for sm_920r4?
Make sure that the ROM that you have downloaded is exactly for your device. Use always the original USB cable. Recommended version of ODIN is 3.10.6
I'm not sure if i just retarded or not. but i used this guide.
https://forum.xda-developers.com/ga...root-g955u-g955u1-snapdragon-sampwnd-t3658911
and my phone is currently BQK5, G955U, and every time i try to run the flash i get
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> abl.elf
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ive tried doing one file at a time but then i get a boot img fail because im not using the BL and the others just give model mismatch so my bad maybe? idk
i cant figure out whats going on. need some help on this one.
After flashing twrp-3.0.2-0-n801x.taz with Odin I can't acces Twrp Recovery.
Model: gt-n8013
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 7 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Power btt + volume up don't work fo me. How to acess recovery mode ?
You may have flashed a wrong TWRP or flash did not complete.
JJEgan said:
You may have flashed a wrong TWRP or flash did not complete.
Click to expand...
Click to collapse
what?
i flashed twrp.3.0.2-n801x.tar man
use another recovery man.
Suggest the one twrp.me has listed for your device.That's not the one you flashed.
JJEgan said:
use another recovery man.
Suggest the one twrp.me has listed for your device.That's not the one you flashed.
Click to expand...
Click to collapse
give link? I just found this one for download
www.twrp.me
imakaay said:
After flashing twrp-3.0.2-0-n801x.taz with Odin I can't acces Twrp Recovery.
Model: gt-n8013
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 7 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Power btt + volume up don't work fo me. How to acess recovery mode ?
Click to expand...
Click to collapse
If anyone has this happen after updating the rom you need to enable developer options and Settings developer options activate advanced restart
I am exactly getting the behaviour. No Matter what TWRP or other recovery I've tried to flash on my N8000, odin says successful, but no way to boot on the recovery.
I've tried almost all TWRP version available.
When I try to flash with odin it fails on boot.bin.
What am doing wrong?
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 3961 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Must flash the lattest firmware versión (check your binary version) if you have Binary 6 you cannt flash Binary 5
hey,
I have a problem with my Note 10 plus, i tried to install another firmware ( because i installed busybox and after i had bootloop); now an error shows on the screen " an error has occurred while updating the device software...." i understand that this is download mod ( i cant access download mod or recovery now).
The problem is that when i try to install the firmware with odin it starts but after a while fails, like down below:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 8172 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> dt.img
<ID:0/005> dtbo.img
<ID:0/005> system.img
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
What could i do?
Solved, set just the pit file with nand erese and repartition checked.