After flashing twrp-3.0.2-0-n801x.taz with Odin I can't acces Twrp Recovery.
Model: gt-n8013
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 7 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Power btt + volume up don't work fo me. How to acess recovery mode ?
You may have flashed a wrong TWRP or flash did not complete.
JJEgan said:
You may have flashed a wrong TWRP or flash did not complete.
Click to expand...
Click to collapse
what?
i flashed twrp.3.0.2-n801x.tar man
use another recovery man.
Suggest the one twrp.me has listed for your device.That's not the one you flashed.
JJEgan said:
use another recovery man.
Suggest the one twrp.me has listed for your device.That's not the one you flashed.
Click to expand...
Click to collapse
give link? I just found this one for download
www.twrp.me
imakaay said:
After flashing twrp-3.0.2-0-n801x.taz with Odin I can't acces Twrp Recovery.
Model: gt-n8013
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 7 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Power btt + volume up don't work fo me. How to acess recovery mode ?
Click to expand...
Click to collapse
If anyone has this happen after updating the rom you need to enable developer options and Settings developer options activate advanced restart
I am exactly getting the behaviour. No Matter what TWRP or other recovery I've tried to flash on my N8000, odin says successful, but no way to boot on the recovery.
I've tried almost all TWRP version available.
Related
Hello,
I'm having problem flashing the orignal firmware package for galaxy Y.
I'm using ODIN v1.85 And downloaded the (Indian) firmware packages form [URL="http://forum.xda-developers.com/showthread.php?t=1465800"[/URL]
It gives me the following messages:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
When I restart my phone it would boot into in custom ROM.
Screen shots attached...
Please help me....
Thank you.
Try flashing it again with another odin file/firmware. Did you a get a green progress bar on your phone while odin process was going on?
Use the odin i am giving here.
https://www.dropbox.com/s/tc32llywhly4nb0/Odin3-v1.85.zip
______________________________________
A HeRo can be AnyOne....© even a PO TA TOE....
Thank you very much i actually flashed another package and its done thanks for your help.:laugh::good:
Just as an added note, always make sure you do an MD5 check on anything you are about to flash in Odin.
Friends,
I try to install Twrp( twrp-3.0-915P_915R4) using Odin, it show success (pass) and reboot,but when i go back to recovery mode its stock recovery !!
any can tell me where i am making mistake
why after successful installation of twrp.tar i am not getting custom recovery
In note edge about me (it show software status : custom)
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
samaly said:
Friends,
I try to install Twrp( twrp-3.0-915P_915R4) using Odin, it show success (pass) and reboot,but when i go back to recovery mode its stock recovery !!
any can tell me where i am making mistake
why after successful installation of twrp.tar i am not getting custom recovery
In note edge about me (it show software status : custom)
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
I remember, that after flashing custom recovery most stock roms reflash the stock recovery during first boot. Try to flash twrp, when process is finished pull battery, put it back in and drictly boot into recovery. When leaving twrp it usually says something like "prevent ROM from flashing stock recovery" which must be answered with "Yes". That should do the trick.
charly-whiskey said:
I remember, that after flashing custom recovery most stock roms reflash the stock recovery during first boot. Try to flash twrp, when process is finished pull battery, put it back in and drictly boot into recovery. When leaving twrp it usually says something like "prevent ROM from flashing stock recovery" which must be answered with "Yes". That should do the trick.
Click to expand...
Click to collapse
Well i flashed the Twrp recovery thrice than finally i got custom recovery
Thank you Charly
So I downloaded the stock firmware for this phone and I've tried to use odin to flash it. But, it will not flash. If anyone can help me, it would be greatly appreciated. Also, here is the script I got from odin when I try to flash.
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2365 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Koleman1312 said:
So I downloaded the stock firmware for this phone and I've tried to use odin to flash it. But, it will not flash. If anyone can help me, it would be greatly appreciated. Also, here is the script I got from odin when I try to flash.
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 2365 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Boot your device into recovery mode and then factory reset then wipe cache partition, then power off the device, then boot into download mode and try flashing again.
Sent from my LGL84VL using Tapatalk
Droidriven said:
Boot your device into recovery mode and then factory reset then wipe cache partition, then power off the device, then boot into download mode and try flashing again.
Sent from my LGL84VL using Tapatalk
Click to expand...
Click to collapse
So I forgot to mention that’s the phone is stuck in emergency software mode and I can’t do thing. Also smart switch says the device isn’t supported
When I try to flash with odin it fails on boot.bin.
What am doing wrong?
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 3961 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Must flash the lattest firmware versión (check your binary version) if you have Binary 6 you cannt flash Binary 5
hey,
I have a problem with my Note 10 plus, i tried to install another firmware ( because i installed busybox and after i had bootloop); now an error shows on the screen " an error has occurred while updating the device software...." i understand that this is download mod ( i cant access download mod or recovery now).
The problem is that when i try to install the firmware with odin it starts but after a while fails, like down below:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 8172 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> dt.img
<ID:0/005> dtbo.img
<ID:0/005> system.img
<ID:0/005> __XmitData_Write
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
What could i do?
Solved, set just the pit file with nand erese and repartition checked.