Database Info

[Q] C-ROM locked SM-G9200

Hi, I hope somebody can help me.
I have a Chinese SM-G9200. I did the following:
- pingpong root
- installed Flashify to install TWRP (success) and it asked to reboot
but during reboot now it says "Custom binary blocked by C-ROM" in pink on the top left corner of the screen of the boot Galaxy logo, then it shuts down :crying:
I cannot have it to complete the boot sequence anymore. See the picture attached.
Also when I try recovery mode is the same pink writing and then shuts down.
Only possibility is to go in download mode, but if I try to upload with Odin, the usual screen that says:
Installation Failure
You need to unlock your device to install a custom OS.
For information about how to unlock, please refer to your device information at wwwsamsungcom/cn.
Please press the power key to restart.
Please somebody help me to get back the phone to life!!! how can I unblock it?
thanks

try to flash only stock recovery, and only from your original rom. if boot's just unlock bootloader with crome aplication found on galaxy store

criszz said:
try to flash only stock recovery, and only from your original rom. if boot's just unlock bootloader with crome aplication found on galaxy store
Click to expand...
Click to collapse
Hi criszz,
Thanks! Where can I get the stock recovery? And then do I flash it with Odin in the PDA button?
Ciao

Ciccetti said:
Hi criszz,
Thanks! Where can I get the stock recovery? And then do I flash it with Odin in the PDA button?
Ciao
Click to expand...
Click to collapse
you need to first install CROM from Galaxy app store and then unclock the bootloader. CROM is official Samsung software.

Hemant said:
you need to first install CROM from Galaxy app store and then unclock the bootloader. CROM is official Samsung software.
Click to expand...
Click to collapse
WORKS!!!
Reinstalled the whole stock ROM, then CROM from Galaxy Store.
My phone is back and now it's unlocked. Thanks!!! :highfive:

enjoy your phone mate

Criszz,
Could you explain the procedure in detail as I have the same exact problem with my HK version Edge. Thanks

criszz said:
enjoy your phone mate
Click to expand...
Click to collapse
well... I've installed TWRP, but the touchscreen doesn't work, and also the buttons don't work in TWRP. How can I move the cursor?
I need to install the gapps...
I've installed TWRP 2.8.6.2. Is there any other version or any other recovery tool that works?
Or: is there any other way to install the gapps on this chinese S6?
Thanks for the support!!! :angel:

Ciccetti,
Could you tell me what steps you have taken to put the phone back to life. My phone always stuck at the logo screen like yours.

Leelowbang said:
Criszz,
Could you explain the procedure in detail as I have the same exact problem with my HK version Edge. Thanks
Click to expand...
Click to collapse
you need to reinstall the exact stock ROM for your mobile. You can find it for example on the sammobile website.
then install it with Odin: you can find the procedure by googling. the phone should not complain about "installing custom software", because it is the stock ROM.
once you are done, go on the galaxy store (icon on the phone) and search for C-ROM app. Install it and unlock your phone.
once done, you can reinstall TWRP with Flashify.
One hint: at the end of the flashify flashing, do not hit reboot button, otherwise the phone will only boot in TWRP and will not boot anymore into normal mode, and you have to reflash everything again.
Instead, after the flashify, do not press reboot, but hold the power button until the popup comes up and then press power off. Then after the phone is well off, keep volume up, home and power to boot into TWRP. Then you will be able to boot again into the normal phone.
Problem is: I can't get the touchscreen to work on TWRP and also the hardware buttons. How can I install the gapps?

So the stock rom should include the stock recovery so that once Odin finishes installation, it will replace TWRP recovery and the phone should be able to bypass the boot lock?

Leelowbang said:
So the stock rom should include the stock recovery so that once Odin finishes installation, it will replace TWRP recovery and the phone should be able to bypass the boot lock?
Click to expand...
Click to collapse
Exactly!

Ciccetti said:
Exactly!
Click to expand...
Click to collapse
ok. found the way to install gapps using flashify.
telling flashify to install gapps through twrp doesn't require to use any button or touch in twrp. so now it is all set!!! :victory:

Do I need to locate the exact version of the stock rom in the phone? if it is a different (either older or newer) version, will it work? I ask this because I rooted the phone by pingpong root about three weeks ago and since then, Samsung has updated at least twice of their official stock rom.

@cicceti
mate, TWRP chinese version with english theme you need.
HERE>>> http://pan.baidu.com/s/1eQxVcIm?thi...6%98%9FS6%E8%B5%84%E6%BA%90%E5%90%88%E9%9B%86

criszz said:
@cicceti
mate, TWRP chinese version with english theme you need.
HERE>>> http://pan.baidu.com/s/1eQxVcIm?thi...6%98%9FS6%E8%B5%84%E6%BA%90%E5%90%88%E9%9B%86
Click to expand...
Click to collapse
IT WORKS!!! thanks BrasoV!!!! :highfive:
so to recap:
Galaxy S6 bought in China SM-G9200
root with Pingpong (google it)
download C-ROM from the Galaxy Store to unlock it from flashing custom roms
download TWRP Chinese version (the "normal" one is not responsive to touch screen), with the English translation (for example, google "SVA SM-G9200" and download G9200-TWRP-2.8.6.0-CN(0601).tar and S6_TWRP_English_theme.zip)
Copy the English theme for TWRP on the phone (extract ui.zip from archive, put it into "/sdcard/TWRP/theme/" directory)
activate the USB debug mode on the phone (google "how to ...")
Install TWRP with Odin 3.10.6 (google "how to ...")
Boot the phone in normal mode
google "Flashify apk", download it and install it
run Flashify, click install GAPPS (choose gapps 5.0), choosing the TWRP option
DONE!!! now you have a S6 dual sim with GAPPS and a working TWRP!!!
NB: KNOX gets tripped and Triangle away doesn't work (yet)
THANKS BRASOV and all the other people!!!

also you can try my stock rom for 9200 hk P >>>>
https://drive.google.com/file/d/0Bzwq8_00PhMUOUtMSW5waTF5ekE/view

Google Play Services on G9200 CHC
Absolutely Awesome :good: You guys saved my life with this solution having almost given up on my G9200 CHC version entirely.
No matter what I tried I always kept getting the "Google Services stopped working" message, even after I had rooted the phone. Then I did the mistake of updating to latest official firmware via Samsung Switch - only made everything worse.
If you did it anyway, here's how to fix it, and get back on track so you can apply the solution provided in this thread:
1. Download the firmware version that was originally installed on the phone (in my case G9200ZCU1AOD9)
2. Boot the phone in download mode and push the original firmware via Odin 3.10.6
3. Boot the phone normally and let it get to the Samsung logo - where it will get stuck/freeze
3. Now enter recovery mode (hold down Volume Up, Power and Home until the boot logo appears)
4. now Wipe data / factory reset and Wipe cache partition, then boot your phone normally.
5. The rest was piece of cake once I found this thread
I tried a million ways to get Gapps on my phone without rooting, but none of them work, even many methods with rooting never worked for me. This one worked, and everything is running smoothly now.
Thanks everyone.......
Ciccetti said:
IT WORKS!!! thanks BrasoV!!!! :highfive:
so to recap:
Galaxy S6 bought in China SM-G9200
root with Pingpong (google it)
download C-ROM from the Galaxy Store to unlock it from flashing custom roms
download TWRP Chinese version (the "normal" one is not responsive to touch screen), with the English translation (for example, google "SVA SM-G9200" and download G9200-TWRP-2.8.6.0-CN(0601).tar and S6_TWRP_English_theme.zip)
Copy the English theme for TWRP on the phone (extract ui.zip from archive, put it into "/sdcard/TWRP/theme/" directory)
activate the USB debug mode on the phone (google "how to ...")
Install TWRP with Odin 3.10.6 (google "how to ...")
Boot the phone in normal mode
google "Flashify apk", download it and install it
run Flashify, click install GAPPS (choose gapps 5.0), choosing the TWRP option
DONE!!! now you have a S6 dual sim with GAPPS and a working TWRP!!!
NB: KNOX gets tripped and Triangle away doesn't work (yet)
THANKS BRASOV and all the other people!!!
Click to expand...
Click to collapse

dear all,
did anybody succeed in installing the GAPPS on the SM-G9200 with the new update to lollipop 5.1.1?
i'm referring to ROM G9200ZCU1BOH2.
i succeeded in installing the G9200-TWRP-2.8.7.0-LL51-CN, but when I flash the GAPPS for 5.1.x and hit reboot, the phone doesn't boot anymore and I have to reinstall the stock ROM...
any clue?
thanks
ciao

umbacos said:
dear all,
did anybody succeed in installing the GAPPS on the SM-G9200 with the new update to lollipop 5.1.1?
i'm referring to ROM G9200ZCU1BOH2.
i succeeded in installing the G9200-TWRP-2.8.7.0-LL51-CN, but when I flash the GAPPS for 5.1.x and hit reboot, the phone doesn't boot anymore and I have to reinstall the stock ROM...
any clue?
thanks
ciao
Click to expand...
Click to collapse
Its a kernel problem i think,i had same issue so i flashed older version of unikernel phone bootup fully but touch not working,im too looking for solution,cannot even downgrade cause of protected bootloader.

[help]need full backup twrp l04-c432b805 [eu]

English language:
Please I have an absolute need to have a full backup TWRP of L04-C432B805 (Europe Version)
The only way to "fix my Honor 6"! Thank you! :good:
Italian language:
Per favore, ho un estremo bisogno di avere un backup Twrp della rom L04-C432B805 (Versione Europea) Mi salveresti il mio dispositivo! Grazie! :good:

Steve Giordano said:
English language:
Please I have an absolute need to have a full backup TWRP of L04-C432B805 (Europe Version)
The only way to "fix my Honor 6"! Thank you! :good:
Italian language:
Per favore, ho un estremo bisogno di avere un backup Twrp della rom L04-C432B805 (Versione Europea) Mi salveresti il mio dispositivo! Grazie! :good:
Click to expand...
Click to collapse
enjoy
mega:///#!jMBjxLrS!fIlgtdWIdo9SWEQ_rN-n7K4occ9bFJwXiYajT81Kwys

i want downgrade to 5.1.1, i tried many downgrade files of indian beta but none works.... my version is l04-c432b805 (beta eu). Can somebody help me? thanks

luis_20_p7 said:
i want downgrade to 5.1.1, i tried many downgrade files of indian beta but none works.... my version is l04-c432b805 (beta eu). Can somebody help me? thanks
Click to expand...
Click to collapse
Nobody knows how to downgrade?
Enviado desde mi H60-L04 mediante Tapatalk

luisjo_ace said:
Nobody knows how to downgrade?
Enviado desde mi H60-L04 mediante Tapatalk
Click to expand...
Click to collapse
http://pantomath.xyz/how-to-unbrick-honor-6-from-android-m/

elroysk said:
http://pantomath.xyz/how-to-unbrick-honor-6-from-android-m/
Click to expand...
Click to collapse
This downgrade files not working if you have a eu beta
Enviado desde mi H60-L04 mediante Tapatalk

luisjo_ace said:
This downgrade files not working if you have a eu beta
Enviado desde mi H60-L04 mediante Tapatalk
Click to expand...
Click to collapse
1. Unlock bootloader
2. Flash twrp
3. Backup your rom in twrp
4. Restore full indian810backup in twrp and flash oeminfo-normal in twrp
4.a Flash stock recovery
4.b Flash this with 3 button and make factory reset
5. Use this and flash B560
6. Use downgrade pack 500
7. Flash european b521
8. Flash oeiminfo-eu with twrp
9. Flash stock recovery

elroysk said:
1. Unlock bootloader
2. Flash twrp
3. Backup your rom in twrp
4. Restore full indian810backup in twrp and flash stock recovery
5. Use this (previous) downgrade method
6. Use downgrade pack 500
7. Flash european b521
Click to expand...
Click to collapse
can you put links for (indian810backup, downgrade pack 500 & stock recovery) please .it will help a lot

elroysk said:
1. Unlock bootloader
2. Flash twrp
3. Backup your rom in twrp
4. Restore full indian810backup in twrp and flash stock recovery
5. Use this (previous) downgrade method
6. Use downgrade pack 500
7. Flash european b521
Click to expand...
Click to collapse
when i restore indian backup the phone doesn't start, then automatically does a factory reset then enters a boot loop, and when i tried to use the downgrade package the problem was still there (failed at 36%) i've been trying many packages in the past 2 weeks and nothing worked.. i'm beginning to lose hope.. is there any other possible solution i should try??

monmon20077 said:
when i restore indian backup the phone doesn't start, then automatically does a factory reset then enters a boot loop, and when i tried to use the downgrade package the problem was still there (failed at 36%) i've been trying many packages in the past 2 weeks and nothing worked.. i'm beginning to lose hope.. is there any other possible solution i should try??
Click to expand...
Click to collapse
check this another method

elroysk said:
check this another method
Click to expand...
Click to collapse
thanks for the response.. but can you tell me how to flash oeminfo_normal or eu in twrp... what step or tool should i use... i've no experience in this

monmon20077 said:
thanks for the response.. but can you tell me how to flash oeminfo_normal or eu in twrp... what step or tool should i use... i've no experience in this
Click to expand...
Click to collapse
with oeminfo files change the location (normal is india and other countries, eu is europe, ru is russia...) source

elroysk said:
with oeminfo files change the location (normal is india and other countries, eu is europe, ru is russia...) source
Click to expand...
Click to collapse
i know what the files mean.. what i need to know is how to flash them using twrp?? should i use install from zip?? or is there another way to flash them??
i'm a noob and i need to know the exact steps so that i won't brick the phone

monmon20077 said:
i know what the files mean.. what i need to know is how to flash them using twrp?? should i use install from zip?? or is there another way to flash them??
i'm a noob and i need to know the exact steps so that i won't brick the phone
Click to expand...
Click to collapse
this .zip is install in twrp.
go to twrp and tap to "install" and select your file.

elroysk said:
1. Unlock bootloader
2. Flash twrp
3. Backup your rom in twrp
4. Restore full indian810backup in twrp and flash oeminfo-normal in twrp
4.a Flash stock recovery
4.b Flash this with 3 button and make factory reset
5. Use this and flash B560
6. Use downgrade pack 500
7. Flash european b521
8. Flash oeiminfo-eu with twrp
9. Flash stock recovery
Click to expand...
Click to collapse
Can i use this method
Hi my bootloader is locked i install b810 but phone not open honor logo downgrade pack is work but b560 app is not install can you help me my phone l04 thanks…
Sory my bad english
Edit:Is it possible to re-open after the locked boot loader

elroysk said:
check this another method
Click to expand...
Click to collapse
i did the steps till the b560 but it didn't start up.. tried to use downgrade package 500 with 3 button method but update didn't even start.. can i restore the backup i did with twrp??

Sory i want to open my bootloder but idont know my product id my phone is honor logo
İs there any method
I must wait

was able to learn the product id with fastboot command?
Thanks...

Hi there, is any oeminfo for malaysia version.. i have sucessful downgrade to lolipop , but no matter what version i flash, it still show my build version as H60-L04C900B500, I have try flash B521, nor B524, it still show B500....

can i flash L29 ROM OVER AL10

Hello guys.. i am confused.. i own a AL10.. Huawei Mate 8 128 gb gold... i am rooted with twrp.. but on the original AL10 B168 Rom.... can i normally flash the B172 AL29 rom? i know that i have to make a clean flash... could anyone tell me if its OK?
thx in advance
Sent from my HUAWEI NXT-AL10 using XDA-Developers mobile app

yes you can. I did.
NEXT cihazımdan Tapatalk kullanılarak gönderildi

yes you can
also i have Chinese version 128 gb mocha gold
i do boot loader unlock
i do recovery via twrp
then i do root
download the stock L29 full size firmware ( ROM ) in zip form
copy it to the phone memory ( to me i used external micro sd and copy the ROM to it)
enter the recovery mode ( press and hold upper volume key + power key ) then when the phone restart release your finger from power key and stay for a while pressing on upper volume key the release you will enter in recovery twrp mode
chose instill then select the path were you copy the full rom
and so on
note the ROM will format you phone ( internal storage ) if not formatted you need to do wipe in order to be free from any issue and have stable rom
note if you flash a stock ROM you will loss recovery and root need to re do recovery and root again
if you do flashing with deodex stock rom or any developer ROM you still can keep root
in stock ROM i face an issue with applying huawei themes
missing of main huawei file browsing
that my simple experience in this phone ( Chinese model )
good luck

thx for your clear instructions
Sent from my HUAWEI NXT-AL10 using XDA-Developers mobile app

Hi everyone. Just came back from a trip to Asia and bought 64gb AL10. I have read several post about it but will appreciate if somebody could resolve my confusion.
I would like to have a stock not rooted international rom on it. Flashing instruction is straight forward. Main question is will I get the same phone as a L29 after flashing? Everything works the same way? Also due to some apps that I'm using at work I can't have a rooted phone.
Could anybody help as I'm a bit confused.
Thanks
J

[SOLVED from FRD-AL00 to FRD-L09] Soft-bricked honor 8 FRD-AL00

I've an honor 8 FRD-AL00. I've fastboot installed and I'm able to access it. I'm also able to access eRecovery.
I've used SRK Tool to change the oeminfo and custom.bin. After trying to install the official L09 I think I bricked my phone.
Here are the steps I've done:
- Unlock bootloader
- Install recovery 6.0
- Root
- Changed oeminfo and custom.bin
- Reboot and tried to install a stock recovery.img boot.img and system.img (which failed while installing it) from offical L09 UPDATE.APP.
Current status: unable to boot either to recovery or android. what should I do in order to get my phone or install the L09 update or at least something that I can use? I've also used the 3 button trick with the dload/UPDATE.APP in the memory card but the phone doesn't show the loading screen it gets stuck into the huawei logo.
I've then tried to install CM13. I've successfully installed twrp-recovery.img but I'm not able to access it (button + vol down nor button + vol up).
Thanks for the help

djx24 said:
I've an honor 8 FRD-AL00. I've fastboot installed and I'm able to access it. I'm also able to access eRecovery.
I've used SRK Tool to change the oeminfo and custom.bin. After trying to install the official L09 I think I bricked my phone.
Here are the steps I've done:
- Unlock bootloader
- Install recovery 6.0
- Root
- Changed oeminfo and custom.bin
- Reboot and tried to install a stock recovery.img boot.img and system.img (which failed while installing it) from offical L09 UPDATE.APP.
Current status: unable to boot either to recovery or android. what should I do in order to get my phone or install the L09 update or at least something that I can use? I've also used the 3 button trick with the dload/UPDATE.APP in the memory card but the phone doesn't show the loading screen it gets stuck into the huawei logo.
I've then tried to install CM13. I've successfully installed twrp-recovery.img but I'm not able to access it (button + vol down nor button + vol up).
Thanks for the help
Click to expand...
Click to collapse
Why did you change the oenimfo and custom.bin?
Sent from my Galaxy Tab 3 using XDA Labs

adriansticoid said:
Why did you change the oenimfo and custom.bin?
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
My main goal was to try to change from FRD-AL00 to FRD-L09. (chinese version to european)

djx24 said:
My main goal was to try to change from FRD-AL00 to FRD-L09. (chinese version to european)
Click to expand...
Click to collapse
Go back To stock .. try dload method body

Romiui said:
Go back To stock .. try dload method body
Click to expand...
Click to collapse
Doesn't work, it gets stuck at the huawei logo.
After a couple of tries I was able to get TWRP installed so I'm able to access and modify the filesystem.
I've noticed that, for some reason, my phone has the "default.prop" set up to "ro.product.model=eva" shouldn't this be FRD's or something like that?
Can someone provide me a copy of their /default.prop file so I could compare?

djx24 said:
Doesn't work, it gets stuck at the huawei logo.
After a couple of tries I was able to get TWRP installed so I'm able to access and modify the filesystem.
I've noticed that, for some reason, my phone has the "default.prop" set up to "ro.product.model=eva" shouldn't this be FRD's or something like that?
Can someone provide me a copy of their /default.prop file so I could compare?
Click to expand...
Click to collapse
Yes. EVA is another Honor phone. It can be caused of the process you did earlier.
Sent from my Galaxy Tab 3 using XDA Labs

adriansticoid said:
Yes. EVA is another Honor phone. It can be caused of the process you did earlier.
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
Yes I think it's the P9, do you have a copy of a valid "default.prop" file?
Thank you

djx24 said:
Yes I think it's the P9, do you have a copy of a valid "default.prop" file?
Thank you
Click to expand...
Click to collapse
Unfortunately no man.
Sent from my Galaxy Tab 3 using XDA Labs

This is solved and I'm successfully running a FRD-AL00 with the FRD-L09C432B120 (EMUI 4.1 + Android 6.0). It's a painful process and I only recommend it to advanced users since you can brick your phone. I almost bricked mine.

djx24 said:
This is solved and I'm successfully running a FRD-AL00 with the FRD-L09C432B120 (EMUI 4.1 + Android 6.0). It's a painful process and I only recommend it to advanced users since you can brick your phone. I almost bricked mine.
Click to expand...
Click to collapse
Glad you fixed it.
Sent from my Galaxy Tab 3 using XDA Labs

Can you please share the instruction please? I have FRD-AL00 and I have followed the debrand steps from VDO - GUIDE
I can see the info that changed to FRD-L09C432B131 but when I play the video, the phone just restart.

Step by Step guide please

Transfer to European version
Hi, it whould be realy helpfull, if you consider to shere how you menadge to transfer to european rom from chinese al-00. It whoul hepl meny of forum members.
djx24 said:
This is solved and I'm successfully running a FRD-AL00 with the FRD-L09C432B120 (EMUI 4.1 + Android 6.0). It's a painful process and I only recommend it to advanced users since you can brick your phone. I almost bricked mine.
Click to expand...
Click to collapse

Hey , Why ???

I changed from AL10 to L19C432 an have the same problem. By pictures and videos my phone reboots.
but not always. can someone help me? thanks

mawe5 said:
I changed from AL10 to L19C432 an have the same problem. By pictures and videos my phone reboots.
but not always. can someone help me? thanks
Click to expand...
Click to collapse
I also have the same mistakes. Help please ...

For now a moment there is no solution for those issues - the only way is to change back to AL00.

Before you do, please install HiSuite, this tool installs all necessary drivers as well.
1) Unlock bootloader and install TWRP: https://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-tested-root-t3443946
2) ROOT: Download SuperSU and flash it using TWRP
2.1) Power off, press volume up + power on
2.2) After TWRP loads, click on Install, select SuperSU zip file you just downloaded and flash it
2.3) Reboot
3) Debrand: https://www.youtube.com/watch?v=JZVsIKtdgV4&t=307s
3.1) This video shows how to debrand P9 but it works on Honor 8 (AL00, AL10, AL09 and AL19)
4) Flash new ROM
4.1) More info about ROMs: https://forum.xda-developers.com/honor-8/how-to/frd-al-00-04-09-10-14-19-differences-t3452924
4.2) ALXX ROM download: https://forum.xda-developers.com/ho...rk-tool-huawei-bootloader-root-t3470823/page3
4.2) LXX ROM download: https://www.androidsage.com/2016/12...rshmallow-emui-5-0-4-1-stock-firmware-update/
Hope this helps but please note FRD-L09 ROM running on FRD-AL00 phone is unstable.
Please let me know if you have any other questions.
---------- Post added at 11:42 PM ---------- Previous post was at 11:39 PM ----------
qsqa said:
For now a moment there is no solution for those issues - the only way is to change back to AL00.
Click to expand...
Click to collapse
Do you know if is there any hardware difference between AL00 and L09? What is the reason phone gets so unstable when you debrand to L09 and flash EU ROM?

i have honor 8 FRD-AL00C00B377 , i need unlock bootloader, but no have option in developer ( OEM UNLOCK ) , in CMD the code , adb unlock bootloader ( my code ) no work , FAIL
i need change my chines version for internacional, is possible ???

aureliomilitao said:
i have honor 8 FRD-AL00C00B377 , i need unlock bootloader, but no have option in developer ( OEM UNLOCK ) , in CMD the code , adb unlock bootloader ( my code ) no work , FAIL
i need change my chines version for internacional, is possible ???
Click to expand...
Click to collapse
adb reboot bootloader
fastboot oem unlock xxxxxxxxxxxxxxxx
I think my command is right.

[ROOT][Stable]Root galaxy C7 PRO Running nougat

سید جواد میر حسینی
IRANIAN DEVELOPER​
Hi to all C7 PRO User(C7010)
Im rooted C7010 Nougat on Hong Kong Rom C7010ZHU1BQL4
its tested and Stable
just working on HONG KONG ROM C7010ZHU1BQL4
ok lets go...
steps :
1 : backup your all data
2 :download the root file
3 : reboot to download mode
4 : flash root file with ODIN (AP)
5 : after you flashed the root file you see a black page for do factory reset(you most do this)
after factory reset your GALAXY C7 PRO (C7010ZHU1BQL4)ROOTED AND YOU CAN INSTALL Magisk manager.apk For root access NO NEED TO INSTALL SUPER SU.apk
DONT FORGET PREES THANKS​DOWNLOAD ROOT FILE​
For install Xposed :
Download and install This App and open it then top on Install/update and wait
DOWNLOAD XPOSED INSTALLER​
Tester : @unjaster
Version : V15.3
Status:Stable
Created : 2018-01-12

thank you bro
mr javad thank u for this metod
---------- Post added at 05:31 PM ---------- Previous post was at 05:24 PM ----------
mr javad thank u for this awsome root metod
after flashing this root metod if not work magisk modules don't wory
flash again magisk 15.3 file.
metod of falshing :
1. open magisk maneger
2. instal magisk 15.3.zip
3. wait until instaling
4. finish and enjoy instaling any modules of magisk

When will it be released?

android 7 with twrp and root is troublesome .. google account when you turn off the phone and do not like the solution is like ...
SM-C7000 cihazımdan Tapatalk kullanılarak gönderildi

Does anyone know the solution? frp lock error ??? rum is recovering but want to get rid of this hat, help !!!
SM-C7000 cihazımdan Tapatalk kullanılarak gönderildi

nazmi28 said:
Does anyone know the solution? frp lock error ??? rum is recovering but want to get rid of this hat, help !!!
SM-C7000 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
That means you have an active Google account. Unfortunately, you can't remove your Google account unless you do a factory reset.

Download Link Added

javad0644 said:
Download Link Added
Click to expand...
Click to collapse
Hello, I have encountered an issue when I flashed the root file and signed in Google account.
My devices fails to boot since then and get the following error:
***********************************************************
Custom binary blocked by FRP Lock! (boot.img)
SECURE FAIL: KERNEL
(and a "Caution" icon in the center)
***********************************************************
And if I am not signing in my G account, it boot up just fine.
Also wondered, was there any ways to fix it?
Or, should I not to sign in my G account after rooted?
Thanks.

MarcusMario0605 said:
Hello, I have encountered an issue when I flashed the root file and signed in Google account.
My devices fails to boot since then and get the following error:
***********************************************************
Custom binary blocked by FRP Lock! (boot.img)
SECURE FAIL: KERNEL
(and a "Caution" icon in the center)
***********************************************************
And if I am not signing in my G account, it boot up just fine.
Also wondered, was there any ways to fix it?
Or, should I not to sign in my G account after rooted?
Thanks.
Click to expand...
Click to collapse
im tested on 3 phone but there is no problem
try to disable frp(search on google)

hi (salam dada)
does it work for c7018????
i want c7018 root for android nougat

mortezarauf said:
hi (salam dada)
does it work for c7018????
i want c7018 root for android nougat
Click to expand...
Click to collapse
Hi,no just for c7010but i can make for c7018
just pm me on telegram
t.me/sjvdm

MarcusMario0605 said:
Hello, I have encountered an issue when I flashed the root file and signed in Google account.
My devices fails to boot since then and get the following error:
***********************************************************
Custom binary blocked by FRP Lock! (boot.img)
SECURE FAIL: KERNEL
(and a "Caution" icon in the center)
***********************************************************
And if I am not signing in my G account, it boot up just fine.
Also wondered, was there any ways to fix it?
Or, should I not to sign in my G account after rooted?
Thanks.
Click to expand...
Click to collapse
before flashing the file remove all lock screen(Password.pattern and etc...

FIrst of all Thankyou so much.. it worked.
But one question, in my Samasung boot logo , "Set Warranty Bit : Kernal" appears in the upper left corner of the screen, why?

shahzeb khattak said:
FIrst of all Thankyou so much.. it worked.
But one question, in my Samasung boot logo , "Set Warranty Bit : Kernal" appears in the upper left corner of the screen, why?
Click to expand...
Click to collapse
its normal bcz the kernel edited

javad0644 said:
its normal bcz the kernel edited
Click to expand...
Click to collapse
ok thankyou.

MarcusMario0605 said:
Hello, I have encountered an issue when I flashed the root file and signed in Google account.
My devices fails to boot since then and get the following error:
***********************************************************
Custom binary blocked by FRP Lock! (boot.img)
SECURE FAIL: KERNEL
(and a "Caution" icon in the center)
***********************************************************
And if I am not signing in my G account, it boot up just fine.
Also wondered, was there any ways to fix it?
Or, should I not to sign in my G account after rooted?
Thanks.
Click to expand...
Click to collapse
install app CROM Service 1.0.4

how install twrp?
javad0644 said:
before flashing the file remove all lock screen(Password.pattern and etc...
Click to expand...
Click to collapse
hello members!
i did this method on my phone its rooted when i flashed twrp in it, in twrp recovery no storage shown, mount errors.........

mine is c7010zhu1brc1 would it create any problems if i use this root file of urs.

I have smg c7 pro (c7010) can someone say me if my phone bootloader is locked or unlocked ? And can you give link for android 9.0 ROM (costum) and link for twrp thanks.

javad0644 said:
its normal bcz the kernel edited
Click to expand...
Click to collapse
hi, my phone stayed at this screen for more than half hours, cannot work......what should i do now?