[ROOT][Stable]Root galaxy C7 PRO Running nougat - Miscellaneous Android Development

سید جواد میر حسینی
IRANIAN DEVELOPER​
Hi to all C7 PRO User(C7010)
Im rooted C7010 Nougat on Hong Kong Rom C7010ZHU1BQL4
its tested and Stable
just working on HONG KONG ROM C7010ZHU1BQL4
ok lets go...
steps :
1 : backup your all data
2 :download the root file
3 : reboot to download mode
4 : flash root file with ODIN (AP)
5 : after you flashed the root file you see a black page for do factory reset(you most do this)
after factory reset your GALAXY C7 PRO (C7010ZHU1BQL4)ROOTED AND YOU CAN INSTALL Magisk manager.apk For root access NO NEED TO INSTALL SUPER SU.apk
DONT FORGET PREES THANKS​DOWNLOAD ROOT FILE​
For install Xposed :
Download and install This App and open it then top on Install/update and wait
DOWNLOAD XPOSED INSTALLER​
Tester : @unjaster
Version : V15.3
Status:Stable
Created : 2018-01-12

thank you bro
mr javad thank u for this metod
---------- Post added at 05:31 PM ---------- Previous post was at 05:24 PM ----------
mr javad thank u for this awsome root metod
after flashing this root metod if not work magisk modules don't wory
flash again magisk 15.3 file.
metod of falshing :
1. open magisk maneger
2. instal magisk 15.3.zip
3. wait until instaling
4. finish and enjoy instaling any modules of magisk

When will it be released?

android 7 with twrp and root is troublesome .. google account when you turn off the phone and do not like the solution is like ...
SM-C7000 cihazımdan Tapatalk kullanılarak gönderildi

Does anyone know the solution? frp lock error ??? rum is recovering but want to get rid of this hat, help !!!
SM-C7000 cihazımdan Tapatalk kullanılarak gönderildi

nazmi28 said:
Does anyone know the solution? frp lock error ??? rum is recovering but want to get rid of this hat, help !!!
SM-C7000 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
That means you have an active Google account. Unfortunately, you can't remove your Google account unless you do a factory reset.

Download Link Added

javad0644 said:
Download Link Added
Click to expand...
Click to collapse
Hello, I have encountered an issue when I flashed the root file and signed in Google account.
My devices fails to boot since then and get the following error:
***********************************************************
Custom binary blocked by FRP Lock! (boot.img)
SECURE FAIL: KERNEL
(and a "Caution" icon in the center)
***********************************************************
And if I am not signing in my G account, it boot up just fine.
Also wondered, was there any ways to fix it?
Or, should I not to sign in my G account after rooted?
Thanks.

MarcusMario0605 said:
Hello, I have encountered an issue when I flashed the root file and signed in Google account.
My devices fails to boot since then and get the following error:
***********************************************************
Custom binary blocked by FRP Lock! (boot.img)
SECURE FAIL: KERNEL
(and a "Caution" icon in the center)
***********************************************************
And if I am not signing in my G account, it boot up just fine.
Also wondered, was there any ways to fix it?
Or, should I not to sign in my G account after rooted?
Thanks.
Click to expand...
Click to collapse
im tested on 3 phone but there is no problem
try to disable frp(search on google)

hi (salam dada)
does it work for c7018????
i want c7018 root for android nougat

mortezarauf said:
hi (salam dada)
does it work for c7018????
i want c7018 root for android nougat
Click to expand...
Click to collapse
Hi,no just for c7010but i can make for c7018
just pm me on telegram
t.me/sjvdm

MarcusMario0605 said:
Hello, I have encountered an issue when I flashed the root file and signed in Google account.
My devices fails to boot since then and get the following error:
***********************************************************
Custom binary blocked by FRP Lock! (boot.img)
SECURE FAIL: KERNEL
(and a "Caution" icon in the center)
***********************************************************
And if I am not signing in my G account, it boot up just fine.
Also wondered, was there any ways to fix it?
Or, should I not to sign in my G account after rooted?
Thanks.
Click to expand...
Click to collapse
before flashing the file remove all lock screen(Password.pattern and etc...

FIrst of all Thankyou so much.. it worked.
But one question, in my Samasung boot logo , "Set Warranty Bit : Kernal" appears in the upper left corner of the screen, why?

shahzeb khattak said:
FIrst of all Thankyou so much.. it worked.
But one question, in my Samasung boot logo , "Set Warranty Bit : Kernal" appears in the upper left corner of the screen, why?
Click to expand...
Click to collapse
its normal bcz the kernel edited

javad0644 said:
its normal bcz the kernel edited
Click to expand...
Click to collapse
ok thankyou.

MarcusMario0605 said:
Hello, I have encountered an issue when I flashed the root file and signed in Google account.
My devices fails to boot since then and get the following error:
***********************************************************
Custom binary blocked by FRP Lock! (boot.img)
SECURE FAIL: KERNEL
(and a "Caution" icon in the center)
***********************************************************
And if I am not signing in my G account, it boot up just fine.
Also wondered, was there any ways to fix it?
Or, should I not to sign in my G account after rooted?
Thanks.
Click to expand...
Click to collapse
install app CROM Service 1.0.4

how install twrp?
javad0644 said:
before flashing the file remove all lock screen(Password.pattern and etc...
Click to expand...
Click to collapse
hello members!
i did this method on my phone its rooted when i flashed twrp in it, in twrp recovery no storage shown, mount errors.........

mine is c7010zhu1brc1 would it create any problems if i use this root file of urs.

I have smg c7 pro (c7010) can someone say me if my phone bootloader is locked or unlocked ? And can you give link for android 9.0 ROM (costum) and link for twrp thanks.

javad0644 said:
its normal bcz the kernel edited
Click to expand...
Click to collapse
hi, my phone stayed at this screen for more than half hours, cannot work......what should i do now?

Related

Upgrade from 32.2.A.0.305 to 32.2.A.5.11

Hi!
Did anybody managed to upgrade from unlocked an rooted 32.2.A.0.305 to 32.2.A.5.11?!
I tried it at least five times and I failed.
Everything seems to work, except unlocking the bootloader and gaining root access.
1) Flashed the new firmware with Flashtool (without TA partitions!).
2) Tried to unlock the bootloader but this is not working as expected.
The service menu tells me that I can unlock my bootloader.
But when I try to unlock it via fastboot I am getting a message, that my device is already rooted/unlocked.
FAILED (remote: Device is already rooted)
So I locked it again using the "Sony Mobile Flasher". After a reboot the "fastboot -i 0x0fce oem unlock 0x....." command gives me an OKAY and after the next reboot my device is automatically wiped.
But the service menu still tells me that my bootloader is unlockable and not that is unlocked!
Installing the patched kernel and TWRP seems to work because fastboot returns an "OKAY".
But neither I can access the TWRP recovery (LED won't get amber) nor the device is rooted.
Okay.... does anybody can give me a hint, how to root the current FW version?!
Ok, I downgraded to 32.2.A.0.305 and everything is working fine again!
I have root access and I can boot into recovery!
What is wrong with 32.2.A.5.11?
im on .I 1 , bootloader unlocked , rooted
got same error as u
device already rooted
so i just didnt check what services menu say and rooted my z5
mohalazio said:
so i just didnt check what services menu say and rooted my z5
Click to expand...
Click to collapse
How did you do this?
I flashed a modifyed kernel (dm-verity: off, RIC: off, TWRP: no, DRM fix: yes, busybox: no) with
fastboot flash boot boot.img
But I cannot install SuperSU from PlayStore.
It sais that the su binary is missing and that it cannot be installed.
So, next I tried to install TWRP with
fastboot install recovery twrp-3.0.2-0-E6653-20160504.img
But on a reboot the LED is not getting amber and I cannot enter recovery.
It seems that neither the patched kernel nor the recovery has been installed. Even though fastboot returned with an OKAY for both install commands!
First I thought that something went wrong patching the kernel with rootkernel5.0. So I downloaded and flashed an already patched one for 32.2.A.5.11. But I have still no root access!
From loud despair I flashed the SLIMX REBORN ROM (1.17BEATMODE). Now I have full root access again, but on 32.2.A.0.305 with my old problems: a) The SU binary cannot be updated from within SuperSU app and b) SONY annoys me to update to the new version every day.
I can't believe that it is not possible to root the new version or that it just doesn't work for my device.
u missed 1 small detail
first : download flashable supersu ( supersu. zip )
then put it in rootkernel folder
build the kernel
u will get extra question asking u to install supersu ( the answer is yes )
flash ur boot. img
thats it
Hi!
I know that I can integrate SuperSU into the kernel image.
But I cannot upgrade a su binary installed that way by using the SuperSU app from playstore.
The PlayStore / TWRP method for SuperSU works like a charm on 32.2.A.0.305.
But I will give it a seventh try with "AndroPlusKernel Permissive v42" instead of the patched stock kernel.
mohalazio said:
u missed 1 small detail
first : download flashable supersu ( supersu. zip )
then put it in rootkernel folder
Click to expand...
Click to collapse
Okay, I am giving up for now!
Buying a SONY phone was one of my worst decisions in 2016.
After a Samsung Galaxy Nexus and a HTC One M8 the SONY Z5 drives me crazy.
After installing 32.2.A.5.11, SuperSU 2.79 and AndroPlus kernel v42 I still have a phone that is unrooted!
And TWRP is reporting the unknown partition "/keymaster"....
so u have supersu installed and working ?
if thats the case i also have binary update problem when updating it from playstore
---------- Post added at 10:53 PM ---------- Previous post was at 10:49 PM ----------
i would suggest one way
first u have 2 IMEI
try unlocking the bootloader with the the other IMEI
UNLOCK using flashtool
then root kernel
---------- Post added at 10:58 PM ---------- Previous post was at 10:53 PM ----------
if things didnt work out
use this rom on .305
http://forum.xda-developers.com/xpe...m-32-2-0-305-e6653-e6683-1-0-0-t3498626/page1
mohalazio said:
so u have supersu installed and working ?
Click to expand...
Click to collapse
I managed to install it via TWRP but as you can see "Root Check" says that my device is not rooted and that the SU binary cannot be found! The same error with the SuperSU app itself. The message means that the su binary cannot be found and SuperSU is not able to install it!
mohalazio said:
i would suggest one way
first u have 2 IMEI
try unlocking the bootloader with the the other IMEI
UNLOCK using flashtool
then root kernel
Click to expand...
Click to collapse
Two IMEI?! My Z5 is the single SIM model.
what supersu version u used?
mohalazio said:
what supersu version u used?
Click to expand...
Click to collapse
SuperSU-v2.79-201612051815
try 2.78
Still not working!
Damn, why I am the only person on this planet that fails to root its XPeria Z5?!
good news for u
new rom based on .11
http://forum.xda-developers.com/xpe...m-32-2-0-305-e6653-e6683-1-0-0-t3498626/page1
Thank you!!
I'll give it a try!

ROOT & TWRP for C9 Pro HK Firmware

This Root has been tested on Hong Kong firmware version AQA2
-Enable developer options (Tap 7 times on build number)
-Enable OEM unlock
-Disable Samsung reactivation lock
-Download Crom services from galaxy app store, open it and unlock bootloader, You will loose waranty !!
-Download stock AQA2 rom just in case ... from this link >>> https://drive.google.com/file/d/0Bzwq8_00PhMUUnNFaWFtZXVnTVk/view?usp=sharing
-Download Odin latest version
-Download TWRP Recovery from this link >>> https://drive.google.com/file/d/0Bzwq8_00PhMUVTJ5ZkRaZGtlZDQ/view?usp=sharing
-Copy TWRP on sd card (NOT internal memory)
-Download SuperSU from this link >>> https://drive.google.com/file/d/0Bzwq8_00PhMUYzE5TkxDSVdlakU/view?usp=sharing
-Start phone in download mode (Switch off , then hold volume down + home button and power button) then press volume up to enter recovery mode
-Flash TWRP with Odin in PDA mode
-Enter in TWRP recovery at FIRST BOOT (important)
-TWRP will be in chinese, don’t tap on anything just swipe . Set language to english. Format data (wipe ) 2 times (important).
-Install su from sd card. Reboot.
DONE !!
Do this steps on your risc.
Source : Gfan.com&ministryofsolutions.com
Errors
Dalvik/ART Cache and Cache not working...
TWRP reboot China Language open.
Thanks....
SM-C9000 cihazımdan Tapatalk kullanılarak gönderildi
kikiri said:
Errors
Dalvik/ART Cache and Cache not working...
TWRP reboot China Language open.
Thanks....
SM-C9000 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Hi kikiri, do you find a issue ?
Hi Lykeul
Yes....
SM-C9000 cihazımdan Tapatalk kullanılarak gönderildi
kikiri said:
Hi Lykeul
Yes....
SM-C9000 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
So can you explain step by step the real process please ?
1: Reboot TWRP China Language opening.
2: Hard reset no.... or factory reset no...
3: Custom rom not install...
SM-C9000 cihazımdan Tapatalk kullanılarak gönderildi
criszz said:
-Enable OEM unlock
-Disable Samsung reactivation lock
Source : Gfan.com&ministryofsolutions.com
Click to expand...
Click to collapse
OEM unlock OK
Disable Samsung reactivation lock don't find ???
Where is it please
Is find my device.
I rootet 2 devices c9000 with this
I can read Chinese and follow the instructions in gfan http://bbs.gfan.com/android-8411113-1-1.html (basically the same as the first post here). And installed twrp on my Hong Kong version AQA2 without problem.
I also odin the the China rom (QA6), follow the same instructions for QA6 twrp, and installed the only custom rom (QA6) over there. It unlocks a lot more features (I need split windows for ALL apps), and 4 ways power menu.
I can't post the link here as it includes some softwares that shouldn't allowed. But it shouldn't be hard to find.
Hi, i also have Aurora rom v1 but i didnt installed. Is compatibile with c9 hk version? Have chinese aps inside? Languages? Is stable? Thank you.
Can anyone please root SM-C900F (Indian version)?
criszz said:
Hi, i also have Aurora rom v1 but i didnt installed. Is compatibile with c9 hk version? Have chinese aps inside? Languages? Is stable? Thank you.
Click to expand...
Click to collapse
Yes, completely compatible and I am using it in HK and China (but have to flash stock China rom or bootloader first with odin or wifi not working). Some Chinese apps but can be uninstall or manually remove using root explorer (under /system/app or /system/priv-app. Google is not enable by default, but U can enable it very easily by using the supplied config tool)
Very stable for me so far. I need custom room to enable split windows for all apps.
Sorry guys for asking again, can we use this process to root c9 indian version?
You can try, make sure you have original rom to flash back if not working
mragankberi said:
Sorry guys for asking again, can we use this process to root c9 indian version?
Click to expand...
Click to collapse
i tried to root my phone sm-c900f using all links here & on google.
Odin said PASS.
But the phone will not boot into twrp..
It says booting into recovery and quickly flashes some text in red and another line in yellow and boots into the phone.
Not sure what it says and I am not sure how to capture that text..
Pariki said:
i tried to root my phone sm-c900f using all links here & on google.
Odin said PASS.
But the phone will not boot into twrp..
It says booting into recovery and quickly flashes some text in red and another line in yellow and boots into the phone.
Not sure what it says and I am not sure how to capture that text..
Click to expand...
Click to collapse
So after flashing TWRP with Odin, are you not able to login into TWRP recovery mode? Could you please confirm if you have saved TWRP file in the SD card?
Yes, I m not able to login into Twrp.
Phone boots to android only.
It's giving an error when entering the twrp but I cannot capture it..
mragankberi said:
So after flashing TWRP with Odin, are you not able to login into TWRP recovery mode? Could you please confirm if you have saved TWRP file in the SD card?
Click to expand...
Click to collapse
No root/custom roms development for this phone.
Eagerly waiting for a Dev to start working on this...
eagerly waiting for C9 pro indian version root
What is specific on this aurora rom?

[GUIDE][Stock] Lenovo P2 Nougat Root Method

EXPLANATION
Hello friends, I will tell you how to get a Root without bootlooping Lenovo P2 device. Looking at other methods, you can get root without any problem if it is a little longer.
FOOTNOTE
Remember to take a backup of your device in case of any problems.
My, OneTeam and XDA are not Responsible for Possible Problems.
Your device needs to be unlocked by OEM.
Your device must have TWRP installed.
ROOT LOADING INSTRUCTIONS
First of all download all the Files Needed from Below.
When the download is completed, all files are discarded.
Install PhH's SuperUser Application when installation is finished.
Once the installation is done, start your device in TWRP mode.
Then load the zip files you downloaded from below.
When the installation is complete, install the Install / SuperUser- R259_OneTeam.zip file.
Restart the device when installation is complete.
Your device will be root when your device is restarted.
DOWNLOAD LINK
phh's SuperUser
superuser-r259_OneTeam.zip
Credit
@wzedlare
OneTeam Forum
Worked P2a42 and P2c72
Thanks for the tutorial bro!
Did not work on the [7.1.1_r28][UNOFFICIAL] LineageOS 14.1 for Lenovo P2.
Was unrooted by Magisk.
ilmervanhattem said:
Did not work on the [7.1.1_r28][UNOFFICIAL] LineageOS 14.1 for Lenovo P2.
Was unrooted by Magisk.
Click to expand...
Click to collapse
Its for stock roms, not lineage roms
don't use this,doesn't work !!! after update on nougat i want to root it with this method and phone stuck in bootloop with permanent blue led !
EDIT :
after long searching i have found solution for this case. i have found whole OTA nougat update and after download i have flashed boot image(only) and phone is started again.after that i try this solution for root and it works !
what i can see with new update is that battery life much better is !
I would like to ask is OneTeam (or anybody else) working on some root method that will not require TWRP/unlocking bootloader?
spawnn617 said:
I would like to ask is OneTeam (or anybody else) working on some root method that will not require TWRP/unlocking bootloader?
Click to expand...
Click to collapse
Unfortunately you can not be anything with the vote, you have to wait 14 days
A am not worried about the waiting period, I don't want to lose warranty.. with rooting only it is not certain, with unlocking bootloader it is certain that warranty is void...
spawnn617 said:
A am not worried about the waiting period, I don't want to lose warranty.. with rooting only it is not certain, with unlocking bootloader it is certain that warranty is void...
Click to expand...
Click to collapse
The guarantee is not so important. Root and use it without problems. The solution for closing soon may also come.
mirot said:
don't use this,doesn't work !!! after update on nougat i want to root it with this method and phone stuck in bootloop with permanent blue led !
EDIT :
after long searching i have found solution for this case. i have found whole OTA nougat update and after download i have flashed boot image(only) and phone is started again.after that i try this solution for root and it works !
what i can see with new update is that battery life much better is !
Click to expand...
Click to collapse
Can you send us a link for the whole nougat update rom
Working Root Method
I can confirm that the rooting method described above works well. I have successfully rooted the nougat rom on my P2
my phone is restarting without properly flashing that ZIP you have given !!
why is it happening like that ??
i am on Stock 7.0, i want to ROOT it, i flashed TWRP official now when i am trying to flash the ZIP , its not completely flashing its stopping at a point making TWRP unresponsive...
then its Rebooting automatically..
so any idea ??
NOTE : i am not in bootloops, phone is booting and working, but cant ROOT !!
---------- Post added at 12:42 PM ---------- Previous post was at 12:30 PM ----------
Under Boot image patcher section :
- Flashing boot image
This where its getting Stopped !!!
Same here, no Root, phone Hang with Blue LED
nandakis4 said:
my phone is restarting without properly flashing that ZIP you have given !!
why is it happening like that ??
i am on Stock 7.0, i want to ROOT it, i flashed TWRP official now when i am trying to flash the ZIP , its not completely flashing its stopping at a point making TWRP unresponsive...
then its Rebooting automatically..
so any idea ??
NOTE : i am not in bootloops, phone is booting and working, but cant ROOT !!
---------- Post added at 12:42 PM ---------- Previous post was at 12:30 PM ----------
Under Boot image patcher section :
- Flashing boot image
This where its getting Stopped !!!
Click to expand...
Click to collapse
jimmybeimer1972 said:
Same here, no Root, phone Hang with Blue LED
Click to expand...
Click to collapse
Have you unlocked your boot loader?
Yes, bootloader is unlocked
spunxhoe said:
Have you unlocked your boot loader?
Click to expand...
Click to collapse
with the new unofficial-twrp-3.1.0-0-p2a42 it works!!!
jimmybeimer1972 said:
Same here, no Root, phone Hang with Blue LED
Click to expand...
Click to collapse
i tried with new unofficial Twrp also !! its failing ! any more ideas??
Phone hanged with BlueLED , flashed boot.img to make it boot again !
nandakis4 said:
Phone hanged with BlueLED , flashed boot.img to make it boot again !
Click to expand...
Click to collapse
Same problem here... blueled and only boot.img is getting me out... not rooted of course!
Any ideas?

[Guide] Root Oppo R9tm/X9009 F1 Plus Marshmallow D.01

Prerequisites: root permission.
Before to start make a full backup of everything! I cannot warranty this method is working in every phone, actually tested only with the r9tm variant.
With the X9009 and r9 variant must be tested!!
Make attention!! This procedure can brick your device!!
Procedure:
1. Flash this TWRP with Rashr. http://www.mediafire.com/file/e76ptigzjcg4i07/UNOFFICIAL-TWRP-3.1.1_X9009.img
2. Reboot into recovery. (At the first boot the screen can remain black, to solve just press the power button 2 times, then in settings change the brightness different from 100%. )
3. Connect the usb cable and copy the marshmallow zip (R9 variant) http://www.oppo.com/au/supports/announcement/test
4. Copy this file to fix the systemui root warning http://www.mediafire.com/file/9nxmc64x4gm6xro/SystemUI_OppoF1Plus_X9009_LP_MM_TWRP.zip
5. Copy the latest Supersu zip installer (tested v82) http://www.supersu.com/download
6. Backup Nvram and Nvdata
7 Flash the marshmallow rom (Do not consider the final error about the wipe data)
8. make a full wipe data (advanced wipe: select data, cache and dalvik)
9. Flash the supersu
10. Flash SysteUI fix
11. Reboot (First boot will take 10 minutes)
12. If the IMEI is missing, reboot in recovery and restore the nvram and nvdata
13. Enjoy
Release: beta1
Twrp is very good, root is perfect with modified systemui. But I have a nonsense problem that black screen after screen unlock. And I know that it is boot.img related issue. When i flash r9m mm boot.img it is working but no sim. And both r9tm and x9009 6.0 mm firmware, fingerprint is not working.
On 5.1 x9009 i have no issue all is working perfect.
I dont know the threater point. He said Prerequisites: root permission
But everyone here want to root
But he said that for what? ?
xk3v1lx said:
I dont know the threater point. He said Prerequisites: root permission
But everyone here want to root
But he said that for what?
Click to expand...
Click to collapse
Saying that downgrade your system, root your device than reupdate with this procedure, if you want root on marshmallow.
or flash unofficial TWRP3.1 recovery via flash tool , than finish Luxios's tutorial, this is the best way
Oh i see
Thanks
But now how to downgrade F1 plus? Oppo locked this feature that i am not able to root it ?
Line: ttddzz
https://vnrom.net/2016/10/free-rom-stock-oppo-f1-plus-x9009-flashtool-ok/
here is a flashtool rom for F1 Plus download and flash it
https://forum.xda-developers.com/op...-f1plus-irgent-spflashtool-rom-t3516145/page9
and here is a tutorial about it(you dont need to change META.INF).
emreagacli said:
https://vnrom.net/2016/10/free-rom-stock-oppo-f1-plus-x9009-flashtool-ok/
here is a flashtool rom for F1 Plus download and flash it
https://forum.xda-developers.com/op...-f1plus-irgent-spflashtool-rom-t3516145/page9
and here is a tutorial about it(you dont need to change META.INF).
Click to expand...
Click to collapse
Sorry
It getting error 0xc0020029
...Vietnamese User...
Use modified mtk_allinone_da.bin . this is the most important think to flash.
I dont know how to modified it ?
...Vietnamese User...
if you read the subject , you don't need to modify, it is modified.
4_ Use this custom DA file: http://www.mediafire.com/file/69l8nxs22r24m7f/MTK_AllInOne_DA.bin
emreagacli said:
if you read the subject , you don't need to modify, it is modified.
4_ Use this custom DA file: http://www.mediafire.com/file/69l8nxs22r24m7f/MTK_AllInOne_DA.bin
Click to expand...
Click to collapse
Thanks
Let me try ?
...Vietnamese User...
has anyone tried it?
I am using 27.05 firmware with root on my r9tm device. I have flashed Luxios's recovery via şp flash tool than installed latest supersu via twrp. Systemui trick didnt work fir me but no need to it on 27.05 firmware.
emreagacli said:
I am using 27.05 firmware with root on my r9tm device. I have flashed Luxios's recovery via şp flash tool than installed latest supersu via twrp. Systemui trick didnt work fir me but no need to it on 27.05 firmware.
Click to expand...
Click to collapse
is that mm? or lp?
x.nallydb28 said:
has anyone tried it?
Click to expand...
Click to collapse
My X9009 was bricked (only virbrate when start) due to flash in a wrong way (Format and Download)
I sent it to warranty center and wait
They said "main error"
? nothing to say...
PS: i did that before trying to use modified DA bin. I will try after take it back
...Vietnamese User...
emreagacli said:
I am using 27.05 firmware with root on my r9tm device. I have flashed Luxios's recovery via şp flash tool than installed latest supersu via twrp. Systemui trick didnt work fir me but no need to it on 27.05 firmware.
Click to expand...
Click to collapse
xk3v1lx said:
My X9009 was bricked (only virbrate when start) due to flash in a wrong way (Format and Download)
I sent it to warranty center and wait
They said "main error"
nothing to say...
PS: i did that before trying to use modified DA bin. I will try after take it back
...Vietnamese User...
Click to expand...
Click to collapse
Sorry to hear that mate. Still waiting to someone who have already tried this procedure.
İt was not problem ypu could reflash via custom da file.
---------- Post added at 02:26 PM ---------- Previous post was at 02:01 PM ----------
x.nallydb28 said:
is that mm? or lp?
Click to expand...
Click to collapse
Lp
emreagacli said:
İt was not problem ypu could reflash via custom da file.
---------- Post added at 02:26 PM ---------- Previous post was at 02:01 PM ----------
Lp
Click to expand...
Click to collapse
So I can still downgrade my x9009EX to LP??
I am making it every time. The most important thing is , using custom da.bin file.
emreagacli said:
I am making it every time. The most important thing is , using custom da.bin file.
Click to expand...
Click to collapse
I'm on MM now, how can I flash it? Do I need to flash something to activate the fastboot on my F1 Plus?

Question [SOLVED] Samsung A12 / SM-A127F/DSN - Root problem

Hello,
I have problem with patch my boot.img with Magisk manager. After patching I got error : "The phone is not running Samsung's official software". After flash again stock boot.img everything works.
I use Odin to flash.
I tried to install unofficial TWRP from other thread but I got SVD Fail and vbmeta errors during boot.
Somebody have any idea how solve this problem?
Model : SM-A127F/DSN
Baseband version : A127FXXU2AUG7
Android 11 (UI 3.1)
Info from download mode :
KG STATE : Checking
FRP LOCK : OFF
OEM LOCK : OFF(U)
Secure Download : Enabled
RP SWREV : B:2 K:2 S:2
I found similar situation on movie :
But for me recovery mode and factory reset not solve problem. Phone stuck on "Samsung's official software" and reboot after a few minutes.
Best Regards
Patch the boot image of the fimware your phone is currently running.
I used the same boot.img and instructions from This thread
In attachment magisk patching log
I solved this problem by This thread
SM-A127F have a different hardware than for example SM-A125F and working on Exynos 850 the same as Samsung A21s.
Magisk 23 still not working.
Regards
cryptoranger said:
I solved this problem by This thread
SM-A127F have a different hardware than for example SM-A125F and working on Exynos 850 the same as Samsung A21s.
Magisk 23 still not working.
Regards
Click to expand...
Click to collapse
I have same phone A127
Do you rooted your device now ?
If yes how do you root device ?
And thank you
khaledoghlo said:
I have same phone A127
Do you rooted your device now ?
If yes how do you root device ?
And thank you
Click to expand...
Click to collapse
Hi, Yes I have root on this device !
It's very simple, but official Magisk have a bug which prevents the device from booting properly and your phone will be stuck with in bootloop.
1. You must get custom patched Magisk (jn attachment) - from This thread and install it on phone.
2. Get your original firmware from : https://samfw.com/firmware/SM-A127F
3. Unpack your firmware and upload AP_XXXXX file on phone and patch it with magisk.
4. Flash with ODIN and done
You have full instruction : Here but I recommend patch full AP_XXX file not only boot.img. Full AP patch It will allow you to turn off DM-Verity immediately and trouble with vbmeta.
SAMSUNG A127F/DS ROOTED FIRMWARE
Samsung A127F rooted firmware Bit2 hang on logo fixed file is free Enjoyhttps://drive.google.com/file/d/1hX8Jv2FlHHiWWhclqhNEbWncMyO8yiFb/view?usp=sharing
ultratechgeek.com
Here is the pre Rooted firmware buy Ultratech geek Team
you can download free via google drive link
no password
tested by me Working 100%
cryptoranger said:
Hi, Yes I have root on this device !
It's very simple, but official Magisk have a bug which prevents the device from booting properly and your phone will be stuck with in bootloop.
1. You must get custom patched Magisk (jn attachment) - from This thread and install it on phone.
2. Get your original firmware from : https://samfw.com/firmware/SM-A127F
3. Unpack your firmware and upload AP_XXXXX file on phone and patch it with magisk.
4. Flash with ODIN and done
You have full instruction : Here but I recommend patch full AP_XXX file not only boot.img. Full AP patch It will allow you to turn off DM-Verity immediately and trouble with vbmeta.
Click to expand...
Click to collapse
Thanks for this.
I just bought this phone and looking forward to building a custom kernel for it.
marrygsm said:
SAMSUNG A127F/DS ROOTED FIRMWARE
Samsung A127F rooted firmware Bit2 hang on logo fixed file is free Enjoyhttps://drive.google.com/file/d/1hX8Jv2FlHHiWWhclqhNEbWncMyO8yiFb/view?usp=sharing
ultratechgeek.com
Here is the pre Rooted firmware buy Ultratech geek Team
you can download free via google drive link
no password
tested by me Working 100%
Click to expand...
Click to collapse
Nice work
Thanks for the root method.
I've discovered that this phone has the same set of CPU frequencies for big and little
Twrp and custom kernels now being developed.
I'll post as soon as they have been tested.
ROOTed ROM for Galaxy A12 A127F A127FXXU2AUH4 (magisk) (OS11)
AP > https://drive.google.com/file/d/1o4qJCAkqZJ7AmakJ4jcGLsCchTeN9VF7/view?usp=sharing
BL > https://drive.google.com/file/d/1W8BBaNND401qeGFV5chqX6jaE1e9P__Q/view?usp=sharing
CP > https://drive.google.com/file/d/1negTtWBj7pcR0NrW8T_k0Onthc_O-Ac_/view?usp=sharing
CSC > https://drive.google.com/file/d/1_cvoKKUunfjHxBQ1T2Tvtb_ASBPWxaZe/view?usp=sharing
HOME CSC > https://drive.google.com/file/d/1oCYzRTONa2JezHsWxkrPppnwvRNWBYWF/view?usp=sharing
PS . flash patched versions odin3 ... uncheck autoreboot ... manual reboot device when flash finished.
DONE !
Bonus > back original state > boot.img vbmeta.img
boot_vbmeta_orig_auh4_tar.tar
drive.google.com
Twrp and custom kernel now available
physwizz said:
Twrp and custom kernel now available
Click to expand...
Click to collapse
really ? working ?
hesen_89 said:
really ? working ?
Click to expand...
Click to collapse
Yep
See my kernel thread
[ROOT] [TWRP] [KERNEL] [GSI] for SM-A127f (a12s)
Root Method https://forum.xda-developers.com/t/root-for-all-exynos-850-devices.4367799/ Twrp and Kernel https://forum.xda-developers.com/t/custom-kernel-and-recoveries-for-m127f.4361841/ Latest twrp...
forum.xda-developers.com
physwizz said:
Yep
See my kernel thread
Click to expand...
Click to collapse
install twrp but not kernel
kernel need install or not ??
Thanks . great work
hesen_89 said:
install twrp but not kernel
kernel need install or not ??
Thanks . great work
Click to expand...
Click to collapse
kernel dont working ( how i install old kernel ?? i cant find it
hesen_89 said:
kernel dont working ( how i install old kernel ?? i cant find it
Click to expand...
Click to collapse
What do you mean?
hesen_89 said:
kernel dont working ( how i install old kernel ?? i cant find it
Click to expand...
Click to collapse
Not exactly sure, maybe physwizz confirm, I presume, you tried install kernel file by Install button in TWRP. I tried it too, failed it too and
a) you have done backup in TWRP, thats usual reason to setup TWRP - you just in case backup those special partition and if you done it, restore boot from backup will help
b) really not sure about that, but Odin, button BL and flash BL file from original stock ROM.
Can anybody advanced confirm? Maybe it can be helpful to know exactly, what for sure are kernel (AFAIK part of boot partition), "bootloader" and "boot" partion, BL button in Odin
honzazkrumlova said:
Not exactly sure, maybe physwizz confirm, I presume, you tried install kernel file by Install button in TWRP. I tried it too, failed it too and
a) you have done backup in TWRP, thats usual reason to setup TWRP - you just in case backup those special partition and if you done it, restore boot from backup will help
b) really not sure about that, but Odin, button BL and flash BL file from original stock ROM.
Can anybody advanced confirm? Maybe it can be helpful to know exactly, what for sure are kernel (AFAIK part of boot partition), "bootloader" and "boot" partion, BL button in Odin
Click to expand...
Click to collapse
can't do another type. yes i did that type. but twrp does not work and does not mount any unit. install fails. I returned everything. deleted

Categories

Resources