Related
Hi all.
Today i give you all my work. I create flashable zip pack for twrp.
This rom's based on stock B560 & B571 for MT7-L09/TL10 Oficiall.
What i added :
- Manual Call Eecorder
- Double Touch to wakeup
- Lte on in statusbar and setting
- Show Network Speed
- Show Other Ring
- Louder Headphones
- SuperSu v2.64 systemless
- Busybox v1.24.2 systemless
No more backup restore from twrp.
Now We can flash full rom using twrp 3.0.2.0
What we need:
1. Unlocked bootloader
2. Twrp 2.8.7.x or 3.0.2.0 ( recomended 3.0.2.0 because i use this to install this rom )
3. You must be on Android 6.0 ---> B522, B560 or B571 ( I use B571 )- USE CORRECTLY
4. Unrooted firmware
How install this rom:
1. Dowload rom from mega.nz
2. Copy to internal sdcard or extsdcard.
3. Backup you current firmware using twrp 3.0.2.0
4. Flash Stock Full Rom in stock recovery ( dload/update.app)
5. Do it wipe in stock recovery.
6. Flash Twrp 3.0.2.0
7. Flash MT7-LO9C432B571 Stock Odex by Chudy_85 ( it's take some time )
8. Double reboot after flash ( Root Install )
This rom wipe your cache and dalvic cache but no data
Rom MT7-L09
MT7-L09C432B571---> mega
MT7-L09C185B560 --->
MT7-TL10
MT7-TL10C432B560 ---> https://mega.nz/#!FJ5SUBoA!-yV4-8t-jQzB8zmQm2ANX3olxSc_Ae7KZdejiREAY2E
MT7-TL10C432B571 ---> https://mega.nz/#!JAhnTIwI!We3afWleBD8LN-2DWY1UVxC8X68zvHz2xFiVIr_Z0lM
MT7-TL10C185B560 --->
What be my next step???
My next step it's do it De-odex and porting kangvip setting if i can do it. Keep your fingers crossed for me :highfive:
Special Thank's for:
@Chainfire for his systemless root
@SuperR. for his kitchen
@osm0sis for his systemless busybox v1.24.2
@chudy_85 for my work here
If you like my work you can buy me �� ������.
List of person who buy me �� ������:
1. @The-Cronos x2
2 @zelvuc
3.
4.
.........
P.s All grants allotting not for the purposes of their own, but my son who is in need of rehabilitation due to cerebral palsy. Thank you on his behalf. If anyone needed proof that send pm on the page where my son is part of the foundation.
Sounds good. Good work, will try when ready.
hi
hi. Now I have a Huawei MT7-09. Firmware B328. Root is and recovery TWRP 3.0.2 for 5.1. Can I just install the recovery of your rom, or do I need any additional actions?
When i upload you must be on Android 6.0 and then flash my rom.
I have little problem with xposed and pre-installed app.
When I reapair this error I upload
send from ? if I help you you can buy me ?
Very interesting project... Wait for your release...
leonardus_magnus said:
Very interesting project... Wait for your release...
Click to expand...
Click to collapse
+1
Ok i finish now last test and if this be work correct i upload dotay but link added tomorrow
Very interesting!! I'll keep my eyes open, really want to see kangvip features implemented.
Link added to first post!!!!
Dear @chudy_85 thanks for your Work....i have some questions....
You wrote 'This rom based on stock B571 for MT7-L09 Oficiall.' and than 'You must be on Android 6.0 ---> B522, B560 or B571 ( I use B571 ) and the last question is: Double reboot after flash ( Root Install )...whats mean you with this?
Do you have some Screen Shots?
@Skorpi58 no need screen shot because this it's full stock. I create full Rom from official b571 for mt7-l09. This it's my idea because when share your twrp backup you added recovery log and then I see all information that as s/n device when backup be create.
If you rooting mm you now supersu after root when you reboot can 2 time reset device to include root
send from ? if I help you you can buy me ?
Tomorrow I added more Marshmallows Rom for MT7-L09 and MT7-TL10
send from ? if I help you you can buy me ?
Hi chudy!
At the moment I'm on B561 v3 kangvip... Do I really need to flash stock B571? Can I simply wipe and flash you release?
You can try but you can lose swype and some pre-installed apps
send from ? if I help you you can buy me ?
Cant wait to have this ROM on my MT7 TL10 .
Really appreciate the double tap option and the screen recorder (very important for me)
Hope i can use xposed with this Rom so i can put the Greenify.
you are the boos! U deserve the beer !
Cheers from Italy
ok a little help i am already on B571............ what should i do ??
chudy_85 said:
You can try but you can lose swype and some pre-installed apps
send from ? if I help you you can buy me ?
Click to expand...
Click to collapse
Thanks for your reply. I'll think about it...
Ciao!
--__-- Reeyan --__-- said:
ok a little help i am already on B571............ what should i do ??
Click to expand...
Click to collapse
If you on B571 flash full rom B571 do it wipe data/cache in stock recovery then flash twrp and rom
send from ? if I help you you can buy me ?
The-Cronos said:
Cant wait to have this ROM on my MT7 TL10 .
Really appreciate the double tap option and the screen recorder (very important for me)
Hope i can use xposed with this Rom so i can put the Greenify.
you are the boos! U deserve the beer !
Cheers from Italy
Click to expand...
Click to collapse
Today I upload B560 for MT7-TL10
send from ? if I help you you can buy me ?
Should I wait for the B571? Hope you will upload it also. Thank you!
Sent from my Redmi Note 3 using XDA-Developers mobile app
I've an honor 8 FRD-AL00. I've fastboot installed and I'm able to access it. I'm also able to access eRecovery.
I've used SRK Tool to change the oeminfo and custom.bin. After trying to install the official L09 I think I bricked my phone.
Here are the steps I've done:
- Unlock bootloader
- Install recovery 6.0
- Root
- Changed oeminfo and custom.bin
- Reboot and tried to install a stock recovery.img boot.img and system.img (which failed while installing it) from offical L09 UPDATE.APP.
Current status: unable to boot either to recovery or android. what should I do in order to get my phone or install the L09 update or at least something that I can use? I've also used the 3 button trick with the dload/UPDATE.APP in the memory card but the phone doesn't show the loading screen it gets stuck into the huawei logo.
I've then tried to install CM13. I've successfully installed twrp-recovery.img but I'm not able to access it (button + vol down nor button + vol up).
Thanks for the help
djx24 said:
I've an honor 8 FRD-AL00. I've fastboot installed and I'm able to access it. I'm also able to access eRecovery.
I've used SRK Tool to change the oeminfo and custom.bin. After trying to install the official L09 I think I bricked my phone.
Here are the steps I've done:
- Unlock bootloader
- Install recovery 6.0
- Root
- Changed oeminfo and custom.bin
- Reboot and tried to install a stock recovery.img boot.img and system.img (which failed while installing it) from offical L09 UPDATE.APP.
Current status: unable to boot either to recovery or android. what should I do in order to get my phone or install the L09 update or at least something that I can use? I've also used the 3 button trick with the dload/UPDATE.APP in the memory card but the phone doesn't show the loading screen it gets stuck into the huawei logo.
I've then tried to install CM13. I've successfully installed twrp-recovery.img but I'm not able to access it (button + vol down nor button + vol up).
Thanks for the help
Click to expand...
Click to collapse
Why did you change the oenimfo and custom.bin?
Sent from my Galaxy Tab 3 using XDA Labs
adriansticoid said:
Why did you change the oenimfo and custom.bin?
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
My main goal was to try to change from FRD-AL00 to FRD-L09. (chinese version to european)
djx24 said:
My main goal was to try to change from FRD-AL00 to FRD-L09. (chinese version to european)
Click to expand...
Click to collapse
Go back To stock .. try dload method body
Romiui said:
Go back To stock .. try dload method body
Click to expand...
Click to collapse
Doesn't work, it gets stuck at the huawei logo.
After a couple of tries I was able to get TWRP installed so I'm able to access and modify the filesystem.
I've noticed that, for some reason, my phone has the "default.prop" set up to "ro.product.model=eva" shouldn't this be FRD's or something like that?
Can someone provide me a copy of their /default.prop file so I could compare?
djx24 said:
Doesn't work, it gets stuck at the huawei logo.
After a couple of tries I was able to get TWRP installed so I'm able to access and modify the filesystem.
I've noticed that, for some reason, my phone has the "default.prop" set up to "ro.product.model=eva" shouldn't this be FRD's or something like that?
Can someone provide me a copy of their /default.prop file so I could compare?
Click to expand...
Click to collapse
Yes. EVA is another Honor phone. It can be caused of the process you did earlier.
Sent from my Galaxy Tab 3 using XDA Labs
adriansticoid said:
Yes. EVA is another Honor phone. It can be caused of the process you did earlier.
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
Yes I think it's the P9, do you have a copy of a valid "default.prop" file?
Thank you
djx24 said:
Yes I think it's the P9, do you have a copy of a valid "default.prop" file?
Thank you
Click to expand...
Click to collapse
Unfortunately no man.
Sent from my Galaxy Tab 3 using XDA Labs
This is solved and I'm successfully running a FRD-AL00 with the FRD-L09C432B120 (EMUI 4.1 + Android 6.0). It's a painful process and I only recommend it to advanced users since you can brick your phone. I almost bricked mine.
djx24 said:
This is solved and I'm successfully running a FRD-AL00 with the FRD-L09C432B120 (EMUI 4.1 + Android 6.0). It's a painful process and I only recommend it to advanced users since you can brick your phone. I almost bricked mine.
Click to expand...
Click to collapse
Glad you fixed it.
Sent from my Galaxy Tab 3 using XDA Labs
Can you please share the instruction please? I have FRD-AL00 and I have followed the debrand steps from VDO - GUIDE
I can see the info that changed to FRD-L09C432B131 but when I play the video, the phone just restart.
Step by Step guide please
Transfer to European version
Hi, it whould be realy helpfull, if you consider to shere how you menadge to transfer to european rom from chinese al-00. It whoul hepl meny of forum members.
djx24 said:
This is solved and I'm successfully running a FRD-AL00 with the FRD-L09C432B120 (EMUI 4.1 + Android 6.0). It's a painful process and I only recommend it to advanced users since you can brick your phone. I almost bricked mine.
Click to expand...
Click to collapse
Hey , Why ???
I changed from AL10 to L19C432 an have the same problem. By pictures and videos my phone reboots.
but not always. can someone help me? thanks
mawe5 said:
I changed from AL10 to L19C432 an have the same problem. By pictures and videos my phone reboots.
but not always. can someone help me? thanks
Click to expand...
Click to collapse
I also have the same mistakes. Help please ...
For now a moment there is no solution for those issues - the only way is to change back to AL00.
Before you do, please install HiSuite, this tool installs all necessary drivers as well.
1) Unlock bootloader and install TWRP: https://forum.xda-developers.com/honor-8/how-to/guide-unlock-bootloader-tested-root-t3443946
2) ROOT: Download SuperSU and flash it using TWRP
2.1) Power off, press volume up + power on
2.2) After TWRP loads, click on Install, select SuperSU zip file you just downloaded and flash it
2.3) Reboot
3) Debrand: https://www.youtube.com/watch?v=JZVsIKtdgV4&t=307s
3.1) This video shows how to debrand P9 but it works on Honor 8 (AL00, AL10, AL09 and AL19)
4) Flash new ROM
4.1) More info about ROMs: https://forum.xda-developers.com/honor-8/how-to/frd-al-00-04-09-10-14-19-differences-t3452924
4.2) ALXX ROM download: https://forum.xda-developers.com/ho...rk-tool-huawei-bootloader-root-t3470823/page3
4.2) LXX ROM download: https://www.androidsage.com/2016/12...rshmallow-emui-5-0-4-1-stock-firmware-update/
Hope this helps but please note FRD-L09 ROM running on FRD-AL00 phone is unstable.
Please let me know if you have any other questions.
---------- Post added at 11:42 PM ---------- Previous post was at 11:39 PM ----------
qsqa said:
For now a moment there is no solution for those issues - the only way is to change back to AL00.
Click to expand...
Click to collapse
Do you know if is there any hardware difference between AL00 and L09? What is the reason phone gets so unstable when you debrand to L09 and flash EU ROM?
i have honor 8 FRD-AL00C00B377 , i need unlock bootloader, but no have option in developer ( OEM UNLOCK ) , in CMD the code , adb unlock bootloader ( my code ) no work , FAIL
i need change my chines version for internacional, is possible ???
aureliomilitao said:
i have honor 8 FRD-AL00C00B377 , i need unlock bootloader, but no have option in developer ( OEM UNLOCK ) , in CMD the code , adb unlock bootloader ( my code ) no work , FAIL
i need change my chines version for internacional, is possible ???
Click to expand...
Click to collapse
adb reboot bootloader
fastboot oem unlock xxxxxxxxxxxxxxxx
I think my command is right.
Need to get a OEM TWRP backup of MHA-L29C636 AUS/Asia model. I have offline dload of rom, data, vendor files which I will share if this works. Will mean can debrand via these files only by bootloader unlock ,Twrp flash, fastboot flash back std recoverey and dload.
If someone can upload OEM partition TWRP backup for this model. Thanks ahead
Sent from my MHA-L09 using Tapatalk
Here https://www.mediafire.com/download/szws87sk7rrkqr6
Thanks to @eddmecha
https://forum.xda-developers.com/ma...products-vendo-bootloop-t3534594/post70977833
Flashed this OEM and somehow locked my boot loader.. Only goes into erecovery currently away from my PC so bricked until home tbc
Sent from my iPad using Tapatalk
DanXbix said:
Flashed this OEM and somehow locked my boot loader.. Only goes into erecovery currently away from my PC so bricked until home tbc
Click to expand...
Click to collapse
What you where trying to achieve?
There is an offline update for c636 in this thread post number 3 https://forum.xda-developers.com/mate-9/help/help-wiped-products-vendo-bootloop-t3534594/page8
You need sd card and copy the dload folder to ur sd,press 3 buttons,power+ vol up+ vol down till the update start.
Yes I know thought I had on microsd already
Sent from my iPad using Tapatalk
But unsure if this will work via flashing only OEM partition as I currently only have L09C34B122 and do not get any updates as Optus Aus are extremely slow at releases. I am trying to getting around extremely over priced debrand of funkyhuawei
Sent from my iPad using Tapatalk
I'm trying to rebrand AL00C00 to L29C636 ,the update started,will let you know how it goes.
It seems successful,but need to flash hw_data.
Brb
I have both and hwdata so awesome that's a cheap way of rebranding
Sent from my iPad using Tapatalk
DanXbix said:
I have both and hwdata so awesome that's a cheap way of rebranding
Click to expand...
Click to collapse
Yep,but i couldn't find hw_data for b115 will try b136
Edit: it's working
Link b136 hw_data? Awesome won't be home until tomorrow will report mine.
We should create a guide for a free unbrand
Sent from my iPad using Tapatalk
So the steps are:
1-Unlock bootloader
2- install twrp
3- restore oeminfo for C636 http://www.mediafire.com/?szws87sk7rrkqr6
4- dload c636 offline firmware https://forum.xda-developers.com/ma...products-vendo-bootloop-t3534594/post70465883
5- unlock bootloader again
6-install twrp again
7- flash hw_data for c636b136 http://update.hicloud.com:8180/TDS/...f1/full/hw/spcseas/update_full_hw_spcseas.zip
8-dload c636 offline firmware again to have locked bootloader and get rid of the warning message lol
9 factory rest from settings.
10-use system update to get the latest firmware.
11 done
Here
Here too
gm007 does it work for MHA-L09C605B111 ???
It sure will
Sent from my MHA-L29 using Tapatalk
In twrp failed ! it shows me "could not find 'meta_inf/com/google/android/update-binary' in the zip file"... help?
If I do this and relock the bootloader, will I still be able to use android pay?
krackers44 said:
If I do this and relock the bootloader, will I still be able to use android pay?
Click to expand...
Click to collapse
That's a good question, would Android Pay work on devices who were unlocked, but are now re-locked again?
This Root has been tested on Hong Kong firmware version AQA2
-Enable developer options (Tap 7 times on build number)
-Enable OEM unlock
-Disable Samsung reactivation lock
-Download Crom services from galaxy app store, open it and unlock bootloader, You will loose waranty !!
-Download stock AQA2 rom just in case ... from this link >>> https://drive.google.com/file/d/0Bzwq8_00PhMUUnNFaWFtZXVnTVk/view?usp=sharing
-Download Odin latest version
-Download TWRP Recovery from this link >>> https://drive.google.com/file/d/0Bzwq8_00PhMUVTJ5ZkRaZGtlZDQ/view?usp=sharing
-Copy TWRP on sd card (NOT internal memory)
-Download SuperSU from this link >>> https://drive.google.com/file/d/0Bzwq8_00PhMUYzE5TkxDSVdlakU/view?usp=sharing
-Start phone in download mode (Switch off , then hold volume down + home button and power button) then press volume up to enter recovery mode
-Flash TWRP with Odin in PDA mode
-Enter in TWRP recovery at FIRST BOOT (important)
-TWRP will be in chinese, don’t tap on anything just swipe . Set language to english. Format data (wipe ) 2 times (important).
-Install su from sd card. Reboot.
DONE !!
Do this steps on your risc.
Source : Gfan.com&ministryofsolutions.com
Errors
Dalvik/ART Cache and Cache not working...
TWRP reboot China Language open.
Thanks....
SM-C9000 cihazımdan Tapatalk kullanılarak gönderildi
kikiri said:
Errors
Dalvik/ART Cache and Cache not working...
TWRP reboot China Language open.
Thanks....
SM-C9000 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Hi kikiri, do you find a issue ?
Hi Lykeul
Yes....
SM-C9000 cihazımdan Tapatalk kullanılarak gönderildi
kikiri said:
Hi Lykeul
Yes....
SM-C9000 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
So can you explain step by step the real process please ?
1: Reboot TWRP China Language opening.
2: Hard reset no.... or factory reset no...
3: Custom rom not install...
SM-C9000 cihazımdan Tapatalk kullanılarak gönderildi
criszz said:
-Enable OEM unlock
-Disable Samsung reactivation lock
Source : Gfan.com&ministryofsolutions.com
Click to expand...
Click to collapse
OEM unlock OK
Disable Samsung reactivation lock don't find ???
Where is it please
Is find my device.
I rootet 2 devices c9000 with this
I can read Chinese and follow the instructions in gfan http://bbs.gfan.com/android-8411113-1-1.html (basically the same as the first post here). And installed twrp on my Hong Kong version AQA2 without problem.
I also odin the the China rom (QA6), follow the same instructions for QA6 twrp, and installed the only custom rom (QA6) over there. It unlocks a lot more features (I need split windows for ALL apps), and 4 ways power menu.
I can't post the link here as it includes some softwares that shouldn't allowed. But it shouldn't be hard to find.
Hi, i also have Aurora rom v1 but i didnt installed. Is compatibile with c9 hk version? Have chinese aps inside? Languages? Is stable? Thank you.
Can anyone please root SM-C900F (Indian version)?
criszz said:
Hi, i also have Aurora rom v1 but i didnt installed. Is compatibile with c9 hk version? Have chinese aps inside? Languages? Is stable? Thank you.
Click to expand...
Click to collapse
Yes, completely compatible and I am using it in HK and China (but have to flash stock China rom or bootloader first with odin or wifi not working). Some Chinese apps but can be uninstall or manually remove using root explorer (under /system/app or /system/priv-app. Google is not enable by default, but U can enable it very easily by using the supplied config tool)
Very stable for me so far. I need custom room to enable split windows for all apps.
Sorry guys for asking again, can we use this process to root c9 indian version?
You can try, make sure you have original rom to flash back if not working
mragankberi said:
Sorry guys for asking again, can we use this process to root c9 indian version?
Click to expand...
Click to collapse
i tried to root my phone sm-c900f using all links here & on google.
Odin said PASS.
But the phone will not boot into twrp..
It says booting into recovery and quickly flashes some text in red and another line in yellow and boots into the phone.
Not sure what it says and I am not sure how to capture that text..
Pariki said:
i tried to root my phone sm-c900f using all links here & on google.
Odin said PASS.
But the phone will not boot into twrp..
It says booting into recovery and quickly flashes some text in red and another line in yellow and boots into the phone.
Not sure what it says and I am not sure how to capture that text..
Click to expand...
Click to collapse
So after flashing TWRP with Odin, are you not able to login into TWRP recovery mode? Could you please confirm if you have saved TWRP file in the SD card?
Yes, I m not able to login into Twrp.
Phone boots to android only.
It's giving an error when entering the twrp but I cannot capture it..
mragankberi said:
So after flashing TWRP with Odin, are you not able to login into TWRP recovery mode? Could you please confirm if you have saved TWRP file in the SD card?
Click to expand...
Click to collapse
No root/custom roms development for this phone.
Eagerly waiting for a Dev to start working on this...
eagerly waiting for C9 pro indian version root
What is specific on this aurora rom?
Hello ..
In this topic I will explain a simplified, how to be the latest version and the latest system update.
••••••••
Here many found updates his phone but you get or find problems such as loss of some basic applications or not working Bluetooth and other problems.
^^^^^
Through this experiential explanation your phone will be updated to the latest version with simple steps without any problems.
~~~~~
Requirements
Twrp
Unlocked bootloder
~~~~~~~~
| Make a backup by hisuite to save and retrieve your files if you want
«Download the system file or update + update_data full through Firmware finder
«Now move files to SD
- Open to Twrb and Wipe System and cache and data
- install update then do not run restart set up update data
- Restart the system.
(No problems encountered, system is fast, I have not lost any apps, version number is correct in settings)
0 • The way you are at Android M or N 0 •
... used Google translate ...
http://imgur.com/a/DrtEh
http://imgur.com/a/lU8Fy
Thx for the info :good:
@albelushi7 @rafitcu
Hi guys, just one question please
How is battery life on b390 - better than in b386?
Tecalote said:
@[email protected]
Hi guys, just one question please
How is battery life on b390 - better than in b386?
Click to expand...
Click to collapse
Well nothing noticeable for me, but certainly no problems with battery life. I still easily get through a day with single full charge, without enabling any power saver modes.
Tecalote said:
@albelushi7 @rafitcu
Hi guys, just one question please
How is battery life on b390 - better than in b386?
Click to expand...
Click to collapse
Same answer @rafitcu .
The battery is pretty good and no noticeable difference between 390, 386 For me ?.
Tecalote said:
@rafitcu
Hi guys, just one question please
How is battery life on b390 - better than in b386?
Click to expand...
Click to collapse
I am in the b387, I have not installed the b 390, basically because in the EVA-L09 you can not. My response to op was sarcasm
Hi,
See here: https://forum.xda-developers.com/p9/help/upgrade-to-b390-c432-t3662783
It fails in TWRP when I try to flash update.zip (B182, B383, B390). I have an assert.
Any ideas on how to fix this ?
Thanks !
XavierP56 said:
Hi,
See here: https://forum.xda-developers.com/p9/help/upgrade-to-b390-c432-t3662783
It fails in TWRP when I try to flash update.zip (B182, B383, B390). I have an assert.
Any ideas on how to fix this ?
Thanks !
Click to expand...
Click to collapse
Download M.M , from Huawei website .
Install use method 3 Buttons ..
After that, follow the explanation above.
Hi,
Can you provide me with more details ? What do you mean by Download M.M, from Huawei Website ?
Do you mean download the B136 firmware or the RollBack package like here : http://www.carbontesla.com/2016/11/downgrade-rollback-huawei-p9-nougat-to-marshmallow-europe/
So:
1/ Using fastboot, reinstall recovery from B386 instead of TWRP
12 Rollback package using the +/- button method (dload folder in sdcard)
2/ Reinstall TWRP
3/ Explanation above : Flash B390 using TWRP.
Is that right ? Thanks !
Arrghhh... Took the Huawei Rollback package, using 3 button : Now in C900B300.
But I can NOT install using 3 button method either B136 (MM) or B390 (MM). Update fails. Same error with TWRP.
Only B386 can install.
Neither can B136, B182, B383, B390 whatever method (3 buttons, TWRP 3.1.1-OpenKirin)
What's wrong with my phone ????
Anyone knows Best way to change from L09C432 to L19C636?
My phone was L19C20 and i unbrand it to european L09C432
And now i want to revert to L19C636 (asia)
Sent from my EVA-L09 using XDA-Developers Legacy app
XavierP56 said:
Hi,
Can you provide me with more details ? What do you mean by Download M.M, from Huawei Website ?
Do you mean download the B136 firmware or the RollBack package like here : http://www.carbontesla.com/2016/11/downgrade-rollback-huawei-p9-nougat-to-marshmallow-europe/
So:
1/ Using fastboot, reinstall recovery from B386 instead of TWRP
12 Rollback package using the +/- button method (dload folder in sdcard)
2/ Reinstall TWRP
3/ Explanation above : Flash B390 using TWRP.
Is that right ? Thanks !
Click to expand...
Click to collapse
No ,the rollback Do not work at all times, and I mean download Android marshmallow 6 look here http://consumer.huawei.com/np/support/downloads/detail/index.htm?id=93652&key4=P9 because this update work by 3 Buttons I have tried a lot and this is the only one that works
without problems and then follow the explanation above
Don't forget install stock recovery using fastboot .
XavierP56 said:
Arrghhh... Took the Huawei Rollback package, using 3 button : Now in C900B300.
But I can NOT install using 3 button method either B136 (MM) or B390 (MM). Update fails. Same error with TWRP.
Only B386 can install.
Neither can B136, B182, B383, B390 whatever method (3 buttons, TWRP 3.1.1-OpenKirin)
What's wrong with my phone ????
Click to expand...
Click to collapse
-Install stock recovery
- install this update http://consumer.huawei.com/np/support/downloads/detail/index.htm?id=93652&key4=P9
- install TWRP and Follow the explanation or the way above.
Hi,
Done that. But when I flash a rom (whatever method), I have an error. Corrupted phone I think...
XavierP56 said:
Hi,
Done that. But when I flash a rom (whatever method), I have an error. Corrupted phone I think...
Click to expand...
Click to collapse
Install stock recovery and download http://consumer.huawei.com/np/support/downloads/detail/index.htm?id=93652&key4=P9
Create a file dload in SD card and move file Update.app in dload .
Use method 3 Buttons To install.
After that if you need update to nougat Use the method you explained.
Good day, I have a Huawei P9 light, I hard reset it now, I set the language , the terms of use and when get to connect to a network(wifi required) it doesn't give a keyboard to type the password only Google voice and that doesn't work,can one help
[email protected] said:
Good day, I have a Huawei P9 light, I hard reset it now, I set the language , the terms of use and when get to connect to a network(wifi required) it doesn't give a keyboard to type the password only Google voice and that doesn't work,can one help
Click to expand...
Click to collapse
This is forum for P9, not for P9 Lite - different phone, hardware, firmwares