[ROM][MT7-L09/TL10] Latest Marshmallow Firmware Stock Odex Flashad via TWRP!!! - Ascend Mate 7 Android Development

Hi all.
Today i give you all my work. I create flashable zip pack for twrp.
This rom's based on stock B560 & B571 for MT7-L09/TL10 Oficiall.
What i added :
- Manual Call Eecorder
- Double Touch to wakeup
- Lte on in statusbar and setting
- Show Network Speed
- Show Other Ring
- Louder Headphones
- SuperSu v2.64 systemless
- Busybox v1.24.2 systemless
No more backup restore from twrp.
Now We can flash full rom using twrp 3.0.2.0
What we need:
1. Unlocked bootloader
2. Twrp 2.8.7.x or 3.0.2.0 ( recomended 3.0.2.0 because i use this to install this rom )
3. You must be on Android 6.0 ---> B522, B560 or B571 ( I use B571 )- USE CORRECTLY
4. Unrooted firmware
How install this rom:
1. Dowload rom from mega.nz
2. Copy to internal sdcard or extsdcard.
3. Backup you current firmware using twrp 3.0.2.0
4. Flash Stock Full Rom in stock recovery ( dload/update.app)
5. Do it wipe in stock recovery.
6. Flash Twrp 3.0.2.0
7. Flash MT7-LO9C432B571 Stock Odex by Chudy_85 ( it's take some time )
8. Double reboot after flash ( Root Install )
This rom wipe your cache and dalvic cache but no data
Rom MT7-L09
MT7-L09C432B571---> mega
MT7-L09C185B560 --->
MT7-TL10
MT7-TL10C432B560 ---> https://mega.nz/#!FJ5SUBoA!-yV4-8t-jQzB8zmQm2ANX3olxSc_Ae7KZdejiREAY2E
MT7-TL10C432B571 ---> https://mega.nz/#!JAhnTIwI!We3afWleBD8LN-2DWY1UVxC8X68zvHz2xFiVIr_Z0lM
MT7-TL10C185B560 --->
What be my next step???
My next step it's do it De-odex and porting kangvip setting if i can do it. Keep your fingers crossed for me :highfive:
Special Thank's for:
@Chainfire for his systemless root
@SuperR. for his kitchen
@osm0sis for his systemless busybox v1.24.2
@chudy_85 for my work here
If you like my work you can buy me �� ������.
List of person who buy me �� ������:
1. @The-Cronos x2
2 @zelvuc
3.
4.
.........
P.s All grants allotting not for the purposes of their own, but my son who is in need of rehabilitation due to cerebral palsy. Thank you on his behalf. If anyone needed proof that send pm on the page where my son is part of the foundation.

Sounds good. Good work, will try when ready.

hi
hi. Now I have a Huawei MT7-09. Firmware B328. Root is and recovery TWRP 3.0.2 for 5.1. Can I just install the recovery of your rom, or do I need any additional actions?

When i upload you must be on Android 6.0 and then flash my rom.
I have little problem with xposed and pre-installed app.
When I reapair this error I upload
send from ? if I help you you can buy me ?

Very interesting project... Wait for your release...

leonardus_magnus said:
Very interesting project... Wait for your release...
Click to expand...
Click to collapse
+1

Ok i finish now last test and if this be work correct i upload dotay but link added tomorrow

Very interesting!! I'll keep my eyes open, really want to see kangvip features implemented.

Link added to first post!!!!

Dear @chudy_85 thanks for your Work....i have some questions....
You wrote 'This rom based on stock B571 for MT7-L09 Oficiall.' and than 'You must be on Android 6.0 ---> B522, B560 or B571 ( I use B571 ) and the last question is: Double reboot after flash ( Root Install )...whats mean you with this?
Do you have some Screen Shots?

@Skorpi58 no need screen shot because this it's full stock. I create full Rom from official b571 for mt7-l09. This it's my idea because when share your twrp backup you added recovery log and then I see all information that as s/n device when backup be create.
If you rooting mm you now supersu after root when you reboot can 2 time reset device to include root
send from ? if I help you you can buy me ?

Tomorrow I added more Marshmallows Rom for MT7-L09 and MT7-TL10
send from ? if I help you you can buy me ?

Hi chudy!
At the moment I'm on B561 v3 kangvip... Do I really need to flash stock B571? Can I simply wipe and flash you release?

You can try but you can lose swype and some pre-installed apps
send from ? if I help you you can buy me ?

Cant wait to have this ROM on my MT7 TL10 .
Really appreciate the double tap option and the screen recorder (very important for me)
Hope i can use xposed with this Rom so i can put the Greenify.
you are the boos! U deserve the beer !
Cheers from Italy

ok a little help i am already on B571............ what should i do ??

chudy_85 said:
You can try but you can lose swype and some pre-installed apps
send from ? if I help you you can buy me ?
Click to expand...
Click to collapse
Thanks for your reply. I'll think about it...
Ciao!

--__-- Reeyan --__-- said:
ok a little help i am already on B571............ what should i do ??
Click to expand...
Click to collapse
If you on B571 flash full rom B571 do it wipe data/cache in stock recovery then flash twrp and rom
send from ? if I help you you can buy me ?

The-Cronos said:
Cant wait to have this ROM on my MT7 TL10 .
Really appreciate the double tap option and the screen recorder (very important for me)
Hope i can use xposed with this Rom so i can put the Greenify.
you are the boos! U deserve the beer !
Cheers from Italy
Click to expand...
Click to collapse
Today I upload B560 for MT7-TL10
send from ? if I help you you can buy me ?

Should I wait for the B571? Hope you will upload it also. Thank you!
Sent from my Redmi Note 3 using XDA-Developers mobile app

Related

About TWRP Nandroid backups.

Hi guys!
Is it possible to move from MM to LP or from LP to MM by restoring from a TWRP Nandroid backup? Can one of the expert members please answer this? If that's possible then, that makes life so much easier for all of us. All we need a collection of clean TWRP Nandroid backups for all versions and a TWRP recovery that is compatible with MM, LP and KK.
I'm asking this because I tried to update my L09 B331 to B5113 using the normal method (update.zip...) but it stops in the recovery mode at %5 and gives me a failed to update message!
Anyone have a solution? or an answer?
Thanks!
Zkertssyria said:
Hi guys!
Is it possible to move from MM to LP or from LP to MM by restoring from a TWRP Nandroid backup? Can one of the expert members please answer this? If that's possible then, that makes life so much easier for all of us. All we need a collection of clean TWRP Nandroid backups for all versions and a TWRP recovery that is compatible with MM, LP and KK.
I'm asking this because I tried to update my L09 B331 to B5113 using the normal method (update.zip...) but it stops in the recovery mode at %5 and gives me a failed to update message!
Anyone have a solution? or an answer?
Thanks!
Click to expand...
Click to collapse
Hi,
I met this problem :
1/ i copy update file of B513 (i'm on B331) (1.22gb) to dload in sdcard through PC
2/ i reboot and start update BUT I FORGOT TO UNPLUG the usb cord
3/ It stuck at 5%
4/ about 30mn, i force poweroff
5/ I unplug USB cord from PC then start to update again, then it updated normally
6/ Update to B522 with same method
If you want to root:
1/ install TWRP for MM with recovery mate7 mobopx v2.1 translate by chudy_85.exe
2/ With Supersu 2.64 pro in SDcard, Flash it Becarefill, if flash with other supersu version you'll get issues (i got issues with Supersu 2.64 BETA)
Hope it'll help
Regards
pocketsmith said:
If you want to root:
1/ install TWRP for MM with recovery mate7 mobopx v2.1 translate by chudy_85.exe
2/ With Supersu 2.64 pro in SDcard, Flash it Becarefill, if flash with other supersu version you'll get issues (i got issues with Supersu 2.64 BETA)
Hope it'll help
Regards
Click to expand...
Click to collapse
I managed to root it with an older supersu version because the 2.64 pro link somewhere here didn't work. Can you share the download link that worked for you?
If you want to use TWRP to flash between nandroids, it must be created from the same version of TWRP. This is a PIA but makes it possible.
Stock LP and MM will have different stock recovery and you need stock recovery for a stock ROM flash. This means a lot of ADB use to keep changing recovery to get all the backups in TWRP. There's no shortcuts to doing it properly.
I used SuperSU-v2.46 on my TL10 with LP B331. Not sure if it works with MM so it's your risk.
Tazmaniiac said:
I managed to root it with an older supersu version because the 2.64 pro link somewhere here didn't work. Can you share the download link that worked for you?
Click to expand...
Click to collapse
look here
http://forum.xda-developers.com/mate-7/general/twrp-root-marshmallow-511-t3303749/page6#post66546853
regards

Troubles getting root with Marshmallow B571

Hello guys,
I'm trying to get root acces on my mt7-l09 for 2 days and i can't figure it out !
it ran lollipop crypted. SO I downloaded Android 6 firmware for l09 on this page (have to select smartphones and mate 7 l09 standard to see it ) :
http://consumer.huawei.com/my/support/downloads/index.htm?keyword=mt7
Then I flash it (manually with huawei extract update and fastboot). I flashed the recovery twrp-2-8-7-0-mate7-android-5-1-t3156779
And with I tryed to flash supersu, differents version. the lastest I could find on google , the 2.64 and maybe one more. One worked but my system was broken, I could not go to my settings at all! when I tapped the button it just do nothing. even if I tryed to acces with long press on wifi speed dial or else.
Then I followeds this thread : http://forum.xda-developers.com/mate-7/general/huawei-ascend-mate-7-bootloader-t3421392
Actually I tryd with other firmware but can't remeber which but each time I got stuck on huawei logo with android bellow. Except once when it broke my system.
I probably missed something, if someone could take a look...
I'm not far if you need more informations !
Thanks you !
Hi, you need to use the supersu 2.64 version found attached to this comment just flash this as you normally would flash supersu from recovery
TheLolageMann said:
Hi, you need to use the supersu 2.64 version found attached to this comment just flash this as you normally would flash supersu from recovery
Click to expand...
Click to collapse
You are my hero!
Thanks you so much!

[Question] I need Help Please ...can i format data from terminal in TWRP ?

i cant make factory reset or wip any thing to flash my rom
is there any way to format from termnal in twrp or another any way
my phone bricked now and i can log int fastboot and TWRP only
please help me and very thank you any way to any one try to help me aslo help other
i search in XDA and cant found solution so i created this thread and for me and for any one need help like me
thank you all
https://youtu.be/M7yHloINh9w
ali_vip60 said:
i cant make factory reset or wip any thing to flash my rom
is there any way to format from termnal in twrp or another any way
my phone bricked now and i can log int fastboot and TWRP only
please help me and very thank you any way to any one try to help me aslo help other
i search in XDA and cant found solution so i created this thread and for me and for any one need help like me
thank you all
Click to expand...
Click to collapse
If you go to twrp then reboot to bootloader? Will it go to fastboot?
dexz said:
If you go to twrp then reboot to bootloader? Will it go to fastboot?
Click to expand...
Click to collapse
yes sure when reboot to bootloader it go to fastboot and thank for replay no one replay and there is more developer
and i think they are busy but ......i solved that problem now by lock bootloader then it told me lock and format factory yes
after this i go TWRP and i can wipe can advance wipe easy ....... now i have another problem
when i flashed any rom with emui 4.0 or 4.1 or custom rom like twisted phone stop on logo huawei and not working
and if i flashed nougat b520 or b530 it show me like this video
https://www.youtube.com/watch?v=fSkasVODNLk
what this problem and i flash 2 file zip ????
ali_vip60 said:
if i flashed nougat b520 or b530 it show me like this video
what this problem and i flash 2 file zip ????
Click to expand...
Click to collapse
Based on the video. Try to install update_data.zip again.
Can you tell me what's the steps you did to install Nougat? (From start)
ali_vip60 said:
now i have another problem
when i flashed any rom with emui 4.0 or 4.1 or custom rom like twisted phone stop on logo huawei and not working
Click to expand...
Click to collapse
Flashed any rom means by dload?
On twisted rom. Did your factory reset it after you flash it?
dexz said:
Based on the video. Try to install update_data.zip again.
Can you tell me what's the steps you did to install Nougat? (From start)
Flashed any rom means by dload?
yes any rom with emui4.0 or 4.1 yess by dload
On twisted rom. Did your factory reset it after you flash it?
Click to expand...
Click to collapse
yes i factory reset and advance wip all thing then install zip file for twisted after finish phone stay on logo huawei as i install any rom with emui 4.0 and 4.1
install nougat
fastboot flash twrp 3.2 for twisted rom cus 3.3 not flashed
then opwn twrp factory reset then wip all thing
after this install 2 file zip and when finish phone open and look like video
flash twrp 3.0.3 and go twrp and flash updat.zip again then open phone
same prorblem like video
ali_vip60 said:
yes i factory reset and advance wip all thing then install zip file for twisted after finish phone stay on logo huawei as i install any rom with emui 4.0 and 4.1
install nougat
fastboot flash twrp 3.2 for twisted rom cus 3.3 not flashed
then opwn twrp factory reset then wip all thing
after this install 2 file zip and when finish phone open and look like video
flash twrp 3.0.3 and go twrp and flash updat.zip again then open phone
same prorblem like video
Click to expand...
Click to collapse
So you wanted to go Nougat or Twisted? If you want to go for Nougat. I suggest you use TWRP 3.0.2 (Nougat).
1. Reboot to TWRP
2. Format data
3. Advance Wipe (Dalvik, Cache, Data & System)
4. Reboot to Recovery (Optional)
5. Install update_data.zip (Do not reboot)
6. Install update.zip (Do not reboot)
7. If you want to root your phone. You can install at this step.
8. Install TWRP 3.0.2-Nougat (You need to install this again because update.zip will replace it with stock recovery)
9. Reboot to System.
10. Wait for few minutes (5-10mins)
That's all.
dexz said:
So you wanted to go Nougat or Twisted? If you want to go for Nougat. I suggest you use TWRP 3.0.2 (Nougat).
1. Reboot to TWRP
2. Format data
3. Advance Wipe (Dalvik, Cache, Data & System)
4. Reboot to Recovery (Optional)
5. Install update_data.zip (Do not reboot)
6. Install update.zip (Do not reboot)
7. If you want to root your phone. You can install at this step.
8. Install TWRP 3.0.2-Nougat (You need to install this again because update.zip will replace it with stock recovery)
9. Reboot to System.
10. Wait for few minutes (5-10mins)
That's all.
Click to expand...
Click to collapse
Exactly this what i do and i get like video can you get me link for c185 nougat maybe i have wrong ver for nougat but iam sure i have my ver for nxt l29 c185 b520 an b560
ali_vip60 said:
Exactly this what i do and i get like video can you get me link for c185 nougat maybe i have wrong ver for nougat but iam sure i have my ver for nxt l29 c185 b520 an b560
Click to expand...
Click to collapse
Don't worry. I'm just wanted to be sure you did the right way. Your original region is L29C185?
What you can do next is to downgrade it to B180(EMUI4) first via dload and check your build number if is NXT-L29C185B180. Search the thread on downgrade method using rollback update.app (EMUI5 to EMUI4)
Tell me the result later.
dexz said:
Don't worry. I'm just wanted to be sure you did the right way. Your original region is L29C185?
What you can do next is to downgrade it to B180(EMUI4) first via dload and check your build number if is NXT-L29C185B180. Search the thread on downgrade method using rollback update.app (EMUI5 to EMUI4)
Tell me the result later.
Click to expand...
Click to collapse
yes my orignal region is l29c185
i can flash b180 by dload but iam scared from flashing and when finish phono stay in logo huawei
tell me what i must do please
ali_vip60 said:
yes my orignal region is l29c185
i can flash b180 by dload but iam scared from flashing and when finish phono stay in logo huawei
tell me what i must do please
Click to expand...
Click to collapse
You need to rollback first.
HUAWEI Mate8 Rollback Package (NXT-L29, from EMUI5.0+Android7.0 rollback to EMUI4.0)
https://forum.xda-developers.com/mate-8/general/huawei-mate8-rollback-package-nxt-l29-t3498256
Then only you can downgrade to B180. Once you have dload B180. Do factory reset (Press Volume Up + Power). You'll be fine.
If your build number is NXT-L29C185B180 after installing B180 then redo the steps of installing Nougat. Just follow my previous steps.

Smart Ultra 6 - ROM 6.0.1. with ROOT

Hi i decided to post here the way to get the latest update ( 6.0.1 ) for VSU6 with ROOT.
First you need to be root and to have Custom recovery on your VSU6.
Then download the vsu6.zip, inside you'll find the stock ROM modded by me and SU.zip.
Reboot on your recovery, install the ROM its going to take a while so be calm and wait when finishes DO NOT REBOOT.
Install SU.
Now you can REBOOT your phone normally AGAIN ITS GOING TO TAKE A WHILE TO START but there you have it Smart Ultra 6 with root.
https://mega.nz/#!kYYWAQZY!HQCa5pLwSc19tkn4bt-UgqaU_rFg3-sgY0tUwUmYO0U
https://forum.xda-developers.com/showpost.php?p=71787674&postcount=117 first cm13
hello
i have 995N with 6..0.1 stock and i need root. pls share how to root
thanks
samukaPedro said:
Hi i decided to post here the way to get the latest update ( 6.0.1 ) for VSU6 with ROOT.
First you need to be root and to have Custom recovery on your VSU6.
Then download the vsu6.zip, inside you'll find the stock ROM modded by me and SU.zip.
Reboot on your recovery, install the ROM its going to take a while so be calm and wait when finishes DO NOT REBOOT.
Install SU.
Now you can REBOOT your phone normally AGAIN ITS GOING TO TAKE A WHILE TO START but there you have it Smart Ultra 6 with root.
https://mega.nz/#!kYYWAQZY!HQCa5pLwSc19tkn4bt-UgqaU_rFg3-sgY0tUwUmYO0U
Click to expand...
Click to collapse
And if I have a 5.1.1 (ES02b version) with root, how update? I can update with SD?
samukaPedro said:
Hi i decided to post here the way to get the latest update ( 6.0.1 ) for VSU6 with ROOT.
First you need to be root and to have Custom recovery on your VSU6.
Then download the vsu6.zip, inside you'll find the stock ROM modded by me and SU.zip.
Reboot on your recovery, install the ROM its going to take a while so be calm and wait when finishes DO NOT REBOOT.
Install SU.
Now you can REBOOT your phone normally AGAIN ITS GOING TO TAKE A WHILE TO START but there you have it Smart Ultra 6 with root.
https://mega.nz/#!kYYWAQZY!HQCa5pLwSc19tkn4bt-UgqaU_rFg3-sgY0tUwUmYO0U
Click to expand...
Click to collapse
Hi can u give me another link this link some how i can not download
mps5566 said:
Hi can u give me another link this link some how i can not download
Click to expand...
Click to collapse
Hi! For the moment i dont have other link im working maybe later i can give you another keep trying this one its working: https://mega.nz/#!kYYWAQZY!HQCa5pLwSc19tkn4bt-UgqaU_rFg3-sgY0tUwUmYO0U
Thank you!
samukaPedro said:
Hi! For the moment i dont have other link im working maybe later i can give you another keep trying this one its working: https://mega.nz/#!kYYWAQZY!HQCa5pLwSc19tkn4bt-UgqaU_rFg3-sgY0tUwUmYO0U
Thank you!
Click to expand...
Click to collapse
Thanks for quick reply but some how i can not download this link very strange
i have vodafone smart ultra 6 after flash twrp recovery always stay on recovery i think if i flash ur rom it should fix my phone.
Can I use Odin?
İnstall qfill program
https://mega.nz/#!FZkRSKIA!p2Y9x0JSSDy9lGj0uFHn-lW14DyuxHh4DocBhxqVHf8
and install twrp for qfil
https://mega.nz/#!5B1CCDwA!X7daokxhM1XpiZoSebq5f-wwau4byED60ExCp8tDFG4
and instal su for twrp
https://mega.nz/#!oU8CTCTQ!naklNI7kaoiZz_JaZVcECBx9gFjyjpb4IsTkjffh2VM
and reboot phone...
Need help to downgrade the ultra six to 5.1.1 to root it currently 601
nomad16 said:
İnstall qfill program
https://mega.nz/#!FZkRSKIA!p2Y9x0JSSDy9lGj0uFHn-lW14DyuxHh4DocBhxqVHf8
and install twrp for qfil
https://mega.nz/#!5B1CCDwA!X7daokxhM1XpiZoSebq5f-wwau4byED60ExCp8tDFG4
and instal su for twrp
https://mega.nz/#!oU8CTCTQ!naklNI7kaoiZz_JaZVcECBx9gFjyjpb4IsTkjffh2VM
and reboot phone...
Click to expand...
Click to collapse
Does this work to root stock 6.0.1 directly?
no one can provide an active link please?

Update method without problems to any version [explain]

Hello ..
In this topic I will explain a simplified, how to be the latest version and the latest system update.
••••••••
Here many found updates his phone but you get or find problems such as loss of some basic applications or not working Bluetooth and other problems.
^^^^^
Through this experiential explanation your phone will be updated to the latest version with simple steps without any problems.
~~~~~
Requirements
Twrp
Unlocked bootloder
~~~~~~~~
| Make a backup by hisuite to save and retrieve your files if you want
«Download the system file or update + update_data full through Firmware finder
«Now move files to SD
- Open to Twrb and Wipe System and cache and data
- install update then do not run restart set up update data
- Restart the system.
(No problems encountered, system is fast, I have not lost any apps, version number is correct in settings)
0 • The way you are at Android M or N 0 •
... used Google translate ...
http://imgur.com/a/DrtEh
http://imgur.com/a/lU8Fy
Thx for the info :good:
@albelushi7 @rafitcu
Hi guys, just one question please
How is battery life on b390 - better than in b386?
Tecalote said:
@[email protected]
Hi guys, just one question please
How is battery life on b390 - better than in b386?
Click to expand...
Click to collapse
Well nothing noticeable for me, but certainly no problems with battery life. I still easily get through a day with single full charge, without enabling any power saver modes.
Tecalote said:
@albelushi7 @rafitcu
Hi guys, just one question please
How is battery life on b390 - better than in b386?
Click to expand...
Click to collapse
Same answer @rafitcu .
The battery is pretty good and no noticeable difference between 390, 386 For me ?.
Tecalote said:
@rafitcu
Hi guys, just one question please
How is battery life on b390 - better than in b386?
Click to expand...
Click to collapse
I am in the b387, I have not installed the b 390, basically because in the EVA-L09 you can not. My response to op was sarcasm
Hi,
See here: https://forum.xda-developers.com/p9/help/upgrade-to-b390-c432-t3662783
It fails in TWRP when I try to flash update.zip (B182, B383, B390). I have an assert.
Any ideas on how to fix this ?
Thanks !
XavierP56 said:
Hi,
See here: https://forum.xda-developers.com/p9/help/upgrade-to-b390-c432-t3662783
It fails in TWRP when I try to flash update.zip (B182, B383, B390). I have an assert.
Any ideas on how to fix this ?
Thanks !
Click to expand...
Click to collapse
Download M.M , from Huawei website .
Install use method 3 Buttons ..
After that, follow the explanation above.
Hi,
Can you provide me with more details ? What do you mean by Download M.M, from Huawei Website ?
Do you mean download the B136 firmware or the RollBack package like here : http://www.carbontesla.com/2016/11/downgrade-rollback-huawei-p9-nougat-to-marshmallow-europe/
So:
1/ Using fastboot, reinstall recovery from B386 instead of TWRP
12 Rollback package using the +/- button method (dload folder in sdcard)
2/ Reinstall TWRP
3/ Explanation above : Flash B390 using TWRP.
Is that right ? Thanks !
Arrghhh... Took the Huawei Rollback package, using 3 button : Now in C900B300.
But I can NOT install using 3 button method either B136 (MM) or B390 (MM). Update fails. Same error with TWRP.
Only B386 can install.
Neither can B136, B182, B383, B390 whatever method (3 buttons, TWRP 3.1.1-OpenKirin)
What's wrong with my phone ????
Anyone knows Best way to change from L09C432 to L19C636?
My phone was L19C20 and i unbrand it to european L09C432
And now i want to revert to L19C636 (asia)
Sent from my EVA-L09 using XDA-Developers Legacy app
XavierP56 said:
Hi,
Can you provide me with more details ? What do you mean by Download M.M, from Huawei Website ?
Do you mean download the B136 firmware or the RollBack package like here : http://www.carbontesla.com/2016/11/downgrade-rollback-huawei-p9-nougat-to-marshmallow-europe/
So:
1/ Using fastboot, reinstall recovery from B386 instead of TWRP
12 Rollback package using the +/- button method (dload folder in sdcard)
2/ Reinstall TWRP
3/ Explanation above : Flash B390 using TWRP.
Is that right ? Thanks !
Click to expand...
Click to collapse
No ,the rollback Do not work at all times, and I mean download Android marshmallow 6 look here http://consumer.huawei.com/np/support/downloads/detail/index.htm?id=93652&key4=P9 because this update work by 3 Buttons I have tried a lot and this is the only one that works
without problems and then follow the explanation above
Don't forget install stock recovery using fastboot .
XavierP56 said:
Arrghhh... Took the Huawei Rollback package, using 3 button : Now in C900B300.
But I can NOT install using 3 button method either B136 (MM) or B390 (MM). Update fails. Same error with TWRP.
Only B386 can install.
Neither can B136, B182, B383, B390 whatever method (3 buttons, TWRP 3.1.1-OpenKirin)
What's wrong with my phone ????
Click to expand...
Click to collapse
-Install stock recovery
- install this update http://consumer.huawei.com/np/support/downloads/detail/index.htm?id=93652&key4=P9
- install TWRP and Follow the explanation or the way above.
Hi,
Done that. But when I flash a rom (whatever method), I have an error. Corrupted phone I think...
XavierP56 said:
Hi,
Done that. But when I flash a rom (whatever method), I have an error. Corrupted phone I think...
Click to expand...
Click to collapse
Install stock recovery and download http://consumer.huawei.com/np/support/downloads/detail/index.htm?id=93652&key4=P9
Create a file dload in SD card and move file Update.app in dload .
Use method 3 Buttons To install.
After that if you need update to nougat Use the method you explained.
Good day, I have a Huawei P9 light, I hard reset it now, I set the language , the terms of use and when get to connect to a network(wifi required) it doesn't give a keyboard to type the password only Google voice and that doesn't work,can one help
[email protected] said:
Good day, I have a Huawei P9 light, I hard reset it now, I set the language , the terms of use and when get to connect to a network(wifi required) it doesn't give a keyboard to type the password only Google voice and that doesn't work,can one help
Click to expand...
Click to collapse
This is forum for P9, not for P9 Lite - different phone, hardware, firmwares

Categories

Resources