TMOTEC headunit ? - MTCD Android Head Units Q&A

I just bought a TMOTEC Android 5.1.1 headunit from the brand "TMOTEC"
Manufacturer Part Number: 9434766680151
Does anybody know that brand and model?

Modelname: A-MEDIA AUTO (1024x600S)
CPU: ARM [email protected] (x4)
Memory: 1024 MB
MCU Version: MTCD_ZYC_V2.05_1
Dec 19 2016
Android Version: 5.1.1
Kernel:
3.0.101+
[email protected] #39
Versionnumber:
rk3188-userdebug 20122016.10:02:02

Its a ZYC MTCD unit.

And what/Who is that? I cannot find ZYC anywhere...
AM I the only one with a ZYC unit....?
Sendt fra min ONE E1003 med Tapatalk

LMarr said:
And what/Who is that? I cannot find ZYC anywhere...
AM I the only one with a ZYC unit....?
Sendt fra min ONE E1003 med Tapatalk
Click to expand...
Click to collapse
Not heard of them before, but it doesnt really matter - its MTCD so the most of the hardware and the ROM is the same as any other MTCD.

typos1 said:
Not heard of them before, but it doesnt really matter - its MTCD so the most of the hardware and the ROM is the same as any other MTCD.
Click to expand...
Click to collapse
Does anyone know how to get into recovery mode with this tmotec head unit?

gtracz said:
Does anyone know how to get into recovery mode with this tmotec head unit?
Click to expand...
Click to collapse
I d guess hold down power and reset, release reset, release power, but ask in the MTC forums to check.

Maybe someone can help me!!! I have exactly the same unit as LMarr. I think that this TMOTEC s..it was upgraded to 5.1.1 and before was 4.4.4 because there's so many problems with it. For example, I cannot make volume louder or reverse, silence. There's some settings for KNOB MODE and whatever settings I choose, knob volume is not acting properly, meaning, if I turn right, to increase volume, and left,to decrease volume. Or if I try to change knob led colors, it keep showing the same color, blue. If I try to set wheel buttons, there's no chance, they are already preset. Please help.

whiteangel89 said:
Maybe someone can help me!!! I have exactly the same unit as LMarr. I think that this TMOTEC s..it was upgraded to 5.1.1 and before was 4.4.4 because there's so many problems with it. For example, I cannot make volume louder or reverse, silence. There's some settings for KNOB MODE and whatever settings I choose, knob volume is not acting properly, meaning, if I turn right, to increase volume, and left,to decrease volume. Or if I try to change knob led colors, it keep showing the same color, blue. If I try to set wheel buttons, there's no chance, they are already preset. Please help.
Click to expand...
Click to collapse
I cannot change the button LED colours...
I have no setting to do that...
Mine was born as a 5.1.1...
Who updated your unit from 4.4.4 to 5.1.1 ?

not all units support led color changing.. some have single colored leds specially those designed for specific car models..
If your car has Canbus, then you can not use the wheel study app.. your only bet to change the steering wheel controls is using MTCD-tools. search the forum
---------- Post added at 12:10 PM ---------- Previous post was at 12:09 PM ----------
if your unit had android 4.4 then my guess is it is an MTCB and not an MTCD.. haven't seen any MTCD with 4.4

Modelname: A-MEDIA AUTO (1024x600S)
CPU: ARM [email protected] (x4)
Memory: 1024 MB
MCU Version: MTCD_ZYC_V2.05_1
Dec 19 2016
Android Version: 5.1.1
Kernel:
3.0.101+
[email protected] #39
Versionnumber:
rk3188-userdebug 20122016.10:02:02
Click to expand...
Click to collapse
And what/Who is that? I cannot find ZYC anywhere...
AM I the only one with a ZYC unit....?
Click to expand...
Click to collapse
I have the exact same model in my passat. I have newest ROM from malaysk, ver. 11.5. It works fine. I didn't expected to be that good.
There is only one annoying thing. When I turn on ignition radio starts playing and is all good. After I start the car it loses the reception. I have to switch it off and on again manually by pressing power button. Then it comes back to normal and the radio is playing as it should. It happens only to radio, other music players working with no problem.
Does anybody have any idea what could be done to fix it?

Related

Replacement for XposedMTC

Hi,
I upgraded from an old MTCB unit to a new MTCD (KGL/PX5). I found out that XposedMTC is no longer working. Is there a replacement for it? The functions/hacks I miss are these:
1) Automatically dim the screen based on sunset/sunrise time
2) Hide volume OSD in notification area
3) Override mode switch (only switch between my own player, radio, DVD and GPS)
Also I would like to know what are the available options for adjusting the volume according to speed.
Btw. I'm using Malaysk ROM.
3) and 4) : graser's xposed module
Enviado desde mi SM-G950F mediante Tapatalk
javlada said:
Also I would like to know what are the available options for adjusting the volume according to speed.
Btw. I'm using Malaysk ROM.
Click to expand...
Click to collapse
Worked for me
https://forum.xda-developers.com/an...release-mtcdautovolume-adjust-volume-t3630636

PX5 Witson 5588 for peugeot 407 auto daylight problem

I have a problem with my auto daylight, my old navigation system was Rneg and all work fine. When start engine auto daylight in on but when install new Witson auto daylight stop work, i must start it manuali on setting via Witson unit. I have menu auto daylight runigh light when touch it, light is on but button still unactive.
I have the same problem, any solution?
Any solution yet?
gratnak said:
Any solution yet?
Click to expand...
Click to collapse
Is it an MTCD/E
Yeah, nah?
It seem I have some update. I order diffent canbus PSA-rz-15 and switch protocol from menu to PSA Raize. With the New decoder I CAN turn on the DRL. But i lost info from Climate section. So this mean That the command are written inside the Canbus, and they are wrongly placed to BSI on car.

Dasaita android 10.0 quirks

Hey all, so I wanna pick y’all’s brain.
Specifics: 2013 Honda Accord Sport sedan 6spd manual with the 2.4L
Head unit: Dasaita Android 10.0 head unit
So first off this thing was very plug and play and got pretty good reviews but it does have its quirks and funny enough it’s none with my iPhone. The quirks are with my car.
1.Both trip odometers reset after every key cycle. Same with the fuel mileage.
2. I can no longer turn off the green fuel mileage backlight on the cluster. It’s always active with driving.
3. The upper factory Honda screen still works with fuel mileage, and back up camera but will not display the clock.
4. My phone call/hang up buttons on my steering wheel no longer work. Not a huge deal as I have Siri.
If anyone has any insight to these issues and can point me in the right direction, whether it be a different canbus, or a specific setting in the head unit itself. Thanks in advance.
On #4 you need to remap in the SWC app.
can't help with the rest but sounds like canbus issues. I'm amazed it's interfering with all those builtin functions and displays in your car. I'd contact the seller, doesn't sound right.
gottahavit said:
On #4 you need to remap in the SWC app.
can't help with the rest but sounds like canbus issues. I'm amazed it's interfering with all those builtin functions and displays in your car. I'd contact the seller, doesn't sound right.
Click to expand...
Click to collapse
The SWC app? Sorry I’m a little new to android as I’ve been an iPhone/Apple guy since smart phones came to be. I agree that it’s a canbus issue. I bought the unit off Amazon and have tried the dasaita customer service but responses have been slow. It may be worth a call to Amazon anyway.
Oarlord said:
The SWC app? Sorry I’m a little new to android as I’ve been an iPhone/Apple guy since smart phones came to be. I agree that it’s a canbus issue. I bought the unit off Amazon and have tried the dasaita customer service but responses have been slow. It may be worth a call to Amazon anyway.
Click to expand...
Click to collapse
Amazon won't help unless you want to return it.
Did you get a canbus specific for your car? if it's interfering that much you may want to just disconnect the canbus and see what it does.
The SWC(Steering Wheel Control) App is a pre-installed app on most of these units that lets you remap your SWC to functions in the unit. Usually the icon looks like a Steering wheel. you go in hold a SWC button then pick an action on the screen.
For setting the steering wheel controls, I have posted a tutorial:
How to reassign steering wheel keys - instructional
This post is not asking how to assign steering wheel keys, it is intended to be an instructional post to maybe help some of you who have found that you cannot change your steering wheel key assignments using the WheelKey Study app on your MTCD/E...
forum.xda-developers.com
Regarding the other issues, I would suggest completely disconnecting the head unit and see if you still have the other issues with your car. There's a few other suggestions I can offer to you if indeed you do not observe the issues you describe.
Please access factory settings (Settings.... Car... Factory settings... password: 126.... Select Canbus option at the top of the screen. Please take a picture of that screen and post picture or post the settings you see on that screen.
Going to ask moderator to move this thread to MTCD Android Head Units Q&A as your head unit is MTCD and there are others in that forum that might be able to offer additional assistance.
Do you have the can bus box assigned to the correct vehicle?
Go into your factory settings and make sure that the box is actually set for YOUR vehicle. There should be a couple of different software versions from different authors you can try. I have a Jeep and there are 3 different software versions for my jeep, and only one of them actually works properly.
The Canbus settings *should* have been configured correctly by Dasaita if the head unit they purchased was not a universal system but specific to their Honda. Although it is possible the settings could have been fiddled with after installation which may have introduced the anomalies they described. That's likely why @jlbooth suggested disconnecting the head unit to see if the anomalies stop and things work as normal.
It is probably not such a good idea to blindly try every possible Honda configuration or possibly them trying the Jeep configuration on their Honda.
Oarlord said:
Hey all, so I wanna pick y’all’s brain.
Specifics: 2013 Honda Accord Sport sedan 6spd manual with the 2.4L
Head unit: Dasaita Android 10.0 head unit
So first off this thing was very plug and play and got pretty good reviews but it does have its quirks and funny enough it’s none with my iPhone. The quirks are with my car.
1.Both trip odometers reset after every key cycle. Same with the fuel mileage.
2. I can no longer turn off the green fuel mileage backlight on the cluster. It’s always active with driving.
3. The upper factory Honda screen still works with fuel mileage, and back up camera but will not display the clock.
4. My phone call/hang up buttons on my steering wheel no longer work. Not a huge deal as I have Siri.
If anyone has any insight to these issues and can point me in the right direction, whether it be a different canbus, or a specific setting in the head unit itself. Thanks in advance.
Click to expand...
Click to collapse
What did the seller suggest when contacted for support.

Question Android upgrade Gps problems need help please

Hi guys I'm new on here, i do apologise if i have posted on the wrong area , i have a Chinese 10.1 inch android SPRD head unit with android 10 installed. I have fallen out with the guy i bought it off as there was a lot of miss advertisements on advert which did not match when i got the unit.
However thats another story and wont get into it, what i want to know and if anyone can help me i will really appreciate it as iv tried everything and getting no where. So here are my problems :-
1, Upgrading android 10 to android 11.. there seems to be no menu that has the upgrade option, so how can i upgrade to android 11 or twelve? And How do i upgrade mcu version?
2, im having problems with GPS when car is on i loose gps signal to like half of one bar.. when car/ignition is turned off GPS comes alive and get good signal and catches satellites.. what does this happen? Whats the solution?
3, i cant change the icons on home screen, cant change/add on tool bar, no bluetooth button to turn on and off on bar on top of screen.. but blue tooth is there works fine when connecting phone and bluetooth icon shows on top bar when connected..
4, the android version seems very limited on this unit, even in developer settings there dont seem to be many adjustments options to turn on or off.. i have a meter display shows cars rom gauge and speedometer its all im KM and there is no options anywhere to change this..
5, system does not shut down when car ignition goes off, i have to manually shut it down, even tho in settings its set to shut down when acc off! Any suggestions?
I have attached pictures of GPS ignition off and one of ignition on.. also all the build software info pictures too..
Any help would be appreciated
1. There's is no upgrade to Android 11 or 12.
These FYT 7862 units only go as high as Android 10. That may change in the future (maybe not) but any that you see say Android 11 or 12 it is fake (like mine, fake Android 11).
2. Are you using a GPS receiver that you got with the head unit or are you using your cars original GPS sensor? Where is it placed? Need more info to answer this
3. I don't know what home screen launcher is installed on your unit so cannot answer. Some launchers cannot change the icons, some can. A photo of the home launcher might help.
j0hn83 said:
1. There's is no upgrade to Android 11 or 12.
These FYT 7862 units only go as high as Android 10. That may change in the future (maybe not) but any that you see say Android 11 or 12 it is fake (like mine, fake Android 11).
2. Are you using a GPS receiver that you got with the head unit or are you using your cars original GPS sensor? Where is it placed? Need more info to answer this
3. I don't know what home screen launcher is installed on your unit so cannot answer. Some launchers cannot change the icons, some can. A photo of the home launcher might help.
Click to expand...
Click to collapse
1, thank you for clarifying
2, cars gps is connected as well as the external gps sensor. As it it dual system (can access cars original system as well as switch to android) cars gps on the car system works fine. The android gps is acting starnge, currently it is behind the dash right behind the head unit mounted on a metal plate top of antenna facing north…
3, i will up load picture shortly of my launcher screen
Thabk you
j0hn83 said:
1. There's is no upgrade to Android 11 or 12.
These FYT 7862 units only go as high as Android 10. That may change in the future (maybe not) but any that you see say Android 11 or 12 it is fake (like mine, fake Android 11).
2. Are you using a GPS receiver that you got with the head unit or are you using your cars original GPS sensor? Where is it placed? Need more info to answer this
3. I don't know what home screen launcher is installed on your unit so cannot answer. Some launchers cannot change the icons, some can. A photo of the home launcher might help.
Click to expand...
Click to collapse
Thats my current launcher john
Update :- problem solved i moved the gps antenna and stuck it behind the head lining restarted system and voila its working now. I had it behind the dash and on top of dash but looks like too much interference for it to work there.

RGB controller compatible with android auto aka google driving assistant

Good morning! new member here so please excuse if i make any misteps...
I recently got RGB lights for my 2020 Regal. I got the app installed on my phone and everything is/was great.
Then i realized the app wasn't available on android auto. Which surprised me since the product was specifically made for a car so i guess i kinda assumed i would be able to control the lights from the dash.
Does anyone know of any LED RBG light apps that work with android auto, or are their any geniouses here that could upgrade an existing app to be compatible with AA?
Thank you,
matt
Zatarah said:
Good morning! new member here so please excuse if i make any misteps...
I recently got RGB lights for my 2020 Regal. I got the app installed on my phone and everything is/was great.
Then i realized the app wasn't available on android auto. Which surprised me since the product was specifically made for a car so i guess i kinda assumed i would be able to control the lights from the dash.
Does anyone know of any LED RBG light apps that work with android auto, or are their any geniouses here that could upgrade an existing app to be compatible with AA?
Thank you,
matt
Click to expand...
Click to collapse
Is unit an MTCD device? Post Android system information including MCU version
lights are: XK Glow Underglow + interior LED Accent Light Kits
"New Style 8x24" Tubes XKchrome Car S
KS-Car Standard"
my phone is a tmobile note 20 ultra
One UI version 5.1 & Android version 13
I assume MCU has something to do with the car. i don't know how to find that.
Thank you for your time and assistance!!

Categories

Resources