[Completed] [HELP] Samsung Galaxy S4 SGH-I337 (AT&T) wont boot - XDA Assist

Hello XDA people.
My mom has a Samsung S4 (I337) and (according to her) suddenly died (supposedly it turned off and she tried charging it for a while but it wont turn on). After some trying to turn on the phone I got it to say "System software not authorized by AT&T has been found on you phone" and then it turned off again and it wont turn on anymore. Recovery mode wasn't accessible but download mode was. So I downloaded the stock 4.4.2 android rom for the I337 and flashed it with ODIN to the phone, and I got success in odin but the phone got stuck trying to enter recovery mode with the blue message "Recovery booting" (and since then that happens everytime I try to go into recovery). Phone won't boot, it gets stuck at Samsung S4 logo and I still can go into download mode.
If I try to reflash that ROM Odin will fail.
This is the message:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_ATT_I337UCUFNB1_I337ATTFNB1_505595_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> aboot.mbn
<ID:0/009> NAND Write Start!!
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there anything I can do?
Thanks!

Hi !
Here is a great index with useful links for your device , have a look
https://forum.xda-developers.com/showthread.php?t=2616221
Good luck

Related

Galaxy S6 sm g920t - boots with sounds but no picture (all black screen fixes no fix)

hey everyone i have my Galaxy s6 from t mobile rooted and one day i went to power it on and it shows pictures for the Galaxy S6 screen but no picture comes up after the Tmobile Sounds boot screen. I have attempted all black screen fixes i can find as well as TWRP recovery and i cant seem to get the correct file? or something always goes wrong in odin when i try to install the stock firmware. not sure what else to try if anyone has any ideas or needs more information please let me know. thank you.
After It fails my download screen on phone says SW REV. CHECK FAIL. DEVICE:3, BINARY:2
***ODIN LOG***
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920TUVU2COF6_G920TTMB2COF6_G920TUVU2COF6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Odin Failed to flash Samsung Galaxy S6 SM-G920W8

I have majorly screwed up. I rooted my Samsung Galaxy s6 without any problems, it worked out fine. Today I wanted to go back to stock so I could upgrade to 6.0.1....Now I am screwed.
I unrooted my phone through the SuperSU app, which probably wasn't the best idea. It rebooted but stuck at the Samsung Galaxy S6 screen and wouldn't proceed.
I then went online to SamMobile and found the stock firmware for my phone. Halfway through, Odin crashed, wirst off with some sort of Write Error...I left it for 10 minutes or so, nothing else happened.
I rebooted my phone, it kept going into that same screen and wouldn't let me proceed.
I tried flashing again, now I have an error saying "No PIT partition detected"
Rebooted my phone once more, I now have a screen says "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software"
I tried again, that the info below is my latest result in which it states that some NAND Write operation has failed....
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920W8VLU3BOJ7_G920W8OYA3BOJ7_G920W8VLU3BOJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!

Odin firmware flashing always fails

I have a Galaxy note 10.1 running kitkat 4.4.2 (GT-N8000)
Yesterday i was browsing the internet when suddenly the device decided to shut down and went on a restart boot loop where it would show the "Samsung galaxy note 10.1" screen for a while and then reboot and re-show the same screen
i have tried entering recovery mode but the tablet keeps restarting without end the only thing i can access is download mode
So recently i tried flashing using Odin but when ever i try to flash any file it shows this error
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried flashing a stock recovery so i can try and wipe the current data
I have tried to download multiple stock roms from jelly bean to kitkat which all ended up failing
I have tried flashing the tablet with a "Repair rom" which contains the BL AP CSC and Modem files
i think that if i can still access the download mode that there is some hope to recover?
Any solutions?
Thanks in advance.
If i posted this in the wrong section forgive me i have just started out

Phone stuck and wont boot

Hi, I recently fixed my note edge by installing 4.4 kitkat. A few days later I realized it was really slow and so I plugged it in and tried to flash marshmallow stock. This didn't work and now my phone goes automatically to download mode and every time I try to re-flash it it either insta fails or says aboot fused 2 binary 1. Also, I think i got twrp installed because it passed on odin but if I try to boot recovery it Says "Could not do normal boot and ddi: mmc_read failed". Thanks for the help!
https://forum.xda-developers.com/note-4-tmobile/general/ddi-mmcread-failed-boot-error-fix-t3434335
Bordo_Bereli51 said:
https://forum.xda-developers.com/note-4-tmobile/general/ddi-mmcread-failed-boot-error-fix-t3434335
Click to expand...
Click to collapse
Thanks for the link but the files included in the guide are listed for the note 4 so how do I use that in note edge thanks for help
UPDATE
I have got phone into download/ odin mode but still need help as my flash fails in odin\
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
Same thing...
Here's my odin log.
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008>
<ID:0/008> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
P.s I have the AT&T model.
UPDATE
<ID:0/008> Added!!
<ID:0/008> Removed!!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N915AUCS2DQD1_CL8932341_QB13132575_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N915AUCS2DQD1_CL8932341_QB13132575_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N915AUCS2DQD1_CL8932341_QB13132575_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_N915AATT2DQD1_CL8932341_QB13132575_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> sbl1.mbn
<ID:0/008> rpm.mbn
<ID:0/008> tz.mbn
<ID:0/008> sdi.mbn
<ID:0/008> NON-HLOS.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img.ext4
<ID:0/008> FAIL! (Write)
<OSM> All threads completed. (succeed 0 / failed 1)
It failed half way through on the phone it says
"ODIN : flash write failure"
1) ODIN 3.09
2) Get N915A 5.0.1 Modem
3) Get N915A 6.0.1 Firmware Stock (the AP file)
4) Get N915A 6.0.1 Modem
1)Place phone in DOWNLOAD MODE (volume down + home + power button)
2) Open ODIN 3.09
3) Place file N915A 5.0.1 Modem in CP
4) Place file N915A 6.0.1 Firmware.tar in AP box
5) Once ODIN is finished flashing the files power off your phone and go back into DOWNLOAD MODE, dont boot.
6) Place file N915A 6.0.1 Modem in CP box
7) Once the file is flashed your phone will be mmc error free and you will have a 100% working phone again.
thejug786 said:
Hi, I recently fixed my note edge by installing 4.4 kitkat. A few days later I realized it was really slow and so I plugged it in and tried to flash marshmallow stock. This didn't work and now my phone goes automatically to download mode and every time I try to re-flash it it either insta fails or says aboot fused 2 binary 1. Also, I think i got twrp installed because it passed on odin but if I try to boot recovery it Says "Could not do normal boot and ddi: mmc_read failed". Thanks for the help!
Click to expand...
Click to collapse
Tell me, how could you return to 4.4.4? I also have n915a on marshmallow, but I would like to return to kitkate. Tell me how you did it ??
"A few days later I realized it was really slow" tells us maybe that this is a emmc failure problem
https://www.sammobile.com/forum/showthread.php?t=30686
In this forum, this guy has the same problem like you. He tried different attempts. Even though he flashed succesfully and booted up, his phone was very slow and had freezing problem. A while later he got again the "Could not do normal boot and ddi: mmc_read failed" problem.

S8+ -- ODIN error during root process

Hi
Have S8+ -- SM-G995F
Attempting to root my S8+ --
Using odin version 3.12
Together with this file: CF-Auto-Root-dream2lte-dream2ltexx-smg955f.tar.md5
Following steps from this site: wccftech.com/how-to-root-galaxy-s8-plus/
This is the Log form Odin:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Nothing has happened for an hour. Phone still connected.
In a mild state of panic.
Any help much appreciated. Is there a graceful way out?
Thanks and cheers
Chexote said:
Hi
Have S8+ -- SM-G995F
Attempting to root my S8+ --
Using odin version 3.12
Together with this file: CF-Auto-Root-dream2lte-dream2ltexx-smg955f.tar.md5
Following steps from this site: wccftech.com/how-to-root-galaxy-s8-plus/
This is the Log form Odin:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> recovery.img
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Nothing has happened for an hour. Phone still connected.
In a mild state of panic.
Any help much appreciated. Is there a graceful way out?
Thanks and cheers
Click to expand...
Click to collapse
Go over to the S8+ sampawnd thread it's now locked but I'm sure there's something there that would help you in your situation. A lot of nonsense in there it's going to take some sifting through the junk but I'm sure you'll find your answer. Good luck...
Update .. solved
Problem solved. Disconnected phone from computer. Did a soft reboot power+volume down for about 20secs. Phone rebooted ok. Works ok.
Chexote said:
Problem solved. Disconnected phone from computer. Did a soft reboot power+volume down for about 20secs. Phone rebooted ok. Works ok.
Click to expand...
Click to collapse
Good glad your back in business..

Categories

Resources