Database Info

What is "Error! Func NO:12 (FUNC_LOAD_IOM3) Error NO:1"

Any advice would be nice.
This is the error message that I get when my phone automatically boots to "RESCUE MODE"
Error!
Func NO:12 (FUNC_LOAD_IOM3)
Error NO:1"
I can boot to fast boot and it automatically boots to RESCUE MODE. I can not boot to recovery, just goes straight to RESCUE MODE. I can do the 3 button manual upgrade method but all it does is boot to the logo screen for about 15 seconds then goes right to the RESCUE MODE. It does not make any indication during the 3 button method when the logo screen is up that it is doing anything. I have the firmware on my SD card in the slot. Its on the root of SD card in a folder named " dload" . I've used this method before to restore it so I know how to do the procedure. But this is the first time I get this error and the first time it doesn't perform the upgrade. I've been at this trying and researching everything for about 6 .months now. No answer. I've email Huawei customer service. No answer. I've pushed thru fast boot the recoveries (CM, and stock ) still can't boot to recovery. Every time I fast boot flash recovery it says "successful ". But can't boot to it. I can fast boot boot.IMG , system.img , etc. But still can't get it to do anything.
But like I said I do have FASTBOOT and RESCUE MODE . any help would be greatly appreciated. Please.

Really nobody has any advice. No one has solved this problem yet

So I guess I'm the only one experiencing this. Riiigghhhttt

Have you tried factory reset?

Press very long to volume up and the power button at same time and after you see the logo press only volume up

mattwheat said:
Any advice would be nice.
This is the error message that I get when my phone automatically boots to "RESCUE MODE"
Error!
Func NO:12 (FUNC_LOAD_IOM3)
Error NO:1"
I can boot to fast boot and it automatically boots to RESCUE MODE. I can not boot to recovery, just goes straight to RESCUE MODE. I can do the 3 button manual upgrade method but all it does is boot to the logo screen for about 15 seconds then goes right to the RESCUE MODE. It does not make any indication during the 3 button method when the logo screen is up that it is doing anything. I have the firmware on my SD card in the slot. Its on the root of SD card in a folder named " dload" . I've used this method before to restore it so I know how to do the procedure. But this is the first time I get this error and the first time it doesn't perform the upgrade. I've been at this trying and researching everything for about 6 .months now. No answer. I've email Huawei customer service. No answer. I've pushed thru fast boot the recoveries (CM, and stock ) still can't boot to recovery. Every time I fast boot flash recovery it says "successful ". But can't boot to it. I can fast boot boot.IMG , system.img , etc. But still can't get it to do anything.
But like I said I do have FASTBOOT and RESCUE MODE . any help would be greatly appreciated. Please.
Click to expand...
Click to collapse
Same problem here. Please help!

I am in the same case, fasboot recognized by my pc but not the adb and Windows doesn't find the good driver.
Envoyé de mon V919 Air DualOS en utilisant Tapatalk

Connect your phone to pc. press vol down and power buttons
Huawei Mate 7 TL10 Android 7.0 Nutella Cihazımdan Tapatalk Kullanılarak Gönderildi

I have a mate 7 tl09, and I have always try this.
I can do in fastboot, but by the way my phone is not detected in adb!
Envoyé de mon Y5 en utilisant Tapatalk

Yes I've done the power + volume buttons. I've tried the manual update method , i can get into fast boot but nothing will flash but recoveries and a couple of the partitions. But it does me no good to flash recoveries stock or custom because no matter what combination of volume buttons and power button I do it either sends me right back to the "Rescue Mode" or " fastboot".I can NOT boot normally NOR can I boot into any recovery. I can NOT flash any system.IMG or data partitions. It errors out soon after I start to flash.

Any luck? I am now getting the same error after trying to flash some extracted .img files through fastboot.

Same problem here with my Mate-7...

Has anyone figured out a solution for this problem? Any ideas? Any thoughts on what exactly I should "fastboot flash" or "fastboot update" to this device ? It won't let me do either one with the full "update" package or a full ROM. I can "fastboot flash" a system.IMG and boot.IMG and recovery.IMG. but still won't boot to anything but "rescue mode" or "fastboot mode". Tried all the different combinations of the update 3 button method. With sdcard half way in, all the way in, with ketchup, standing on my head. But nothing works. It sits on the Huawei boot logo screen for 15 seconds like its trying but then right back to " rescue mode".

From what I've read on the Chinese forums, back to Huawei for new main board. Huawei programmers suck.

mattwheat said:
Has anyone figured out a solution for this problem? Any ideas? Any thoughts on what exactly I should "fastboot flash" or "fastboot update" to this device ? It won't let me do either one with the full "update" package or a full ROM. I can "fastboot flash" a system.IMG and boot.IMG and recovery.IMG. but still won't boot to anything but "rescue mode" or "fastboot mode". Tried all the different combinations of the update 3 button method. With sdcard half way in, all the way in, with ketchup, standing on my head. But nothing works. It sits on the Huawei boot logo screen for 15 seconds like its trying but then right back to " rescue mode".
Click to expand...
Click to collapse
Hi, you can fix it. İ explain,
1. Download this and extract https://mega.nz/#!BhgTyCZb!oUvS6UDhcsp54xCy5x8kvldPgBC43XHH5yGSWRdQF3w
2. Download it and extract your last rom on your phone running.
https://mega.nz/#!g9oV3QAL!cJpqYOfvxDCaO3tQq15hPHyl1rpuZPpX9yKMdQGSYfo
3. Connect your phone to pc with usb cable. And press vol - and power buttons.
4. Your phone will open fastboot menu. And flash the rom your last runnig rom on your phone. (Go to first link)
İf you dont fix it, i can help you
Huawei Mate 7 TL10 Cihazimdan Yollamişam

Does this work on TL09?

fooshack said:
Does this work on TL09?
Click to expand...
Click to collapse
Remember your last update. İt must work. İ get back my phone a number of times
Huawei Mate 7 TL10 Cihazimdan Yollamişam

I'm sorry but I don't understand what you are saying. It obviously doesn't work, nothing works but fastboot/rescue mode.
Maybe you can show the steps with screen shots or someone can translate you native language to English...I don't understand a lot of what you are saying.
I really appreciate your help.
Thank you.

fooshack said:
I'm sorry but I don't understand what you are saying. It obviously doesn't work, nothing works but fastboot/rescue mode.
Maybe you can show the steps with screen shots or someone can translate you native language to English...I don't understand a lot of what you are saying.
I really appreciate your help.
Thank you.
Click to expand...
Click to collapse
First of all, extract update.app your last firmware on your phone. Then download it.
https://mega.nz/#!BhgTyCZb!oUvS6UDhcsp54xCy5x8kvldPgBC43XHH5yGSWRdQF3w
This software is running fastboot/resuce menu. And it will write the rom on your phone.
Required for writting rom in your update.app, you extract update.app and copy System.img, Boot.img, Cust.img, Userdata.img, Cache.img.
You understand, i am foreign person. Sorry my bad english
İf you want to look for using programme page.
http://turkpda.com/konu/huawei-ascend-mate-7-rom-yuekleyici.954/
Huawei Mate 7 TL10 Cihazimdan Yollamişam

didn't work

Flashed wrong recovery, phone in rescue mode!

Hi Guys,
can you help me out? I used flashify to flash the B324 recovery, so I thought, on my L09, but afterwards, I'm stuck in recovery mode. My phone says I should use Hisuite tool to recovery system. But of course, HiSuite says my phone is not connected.
I am getting the Error message: Func NO: 10 (FUNC_BOOT_RECOVERY) and Error NO: 2.
What can I do to get back to whatever version works?

dekraan said:
Hi Guys,
can you help me out? I used flashify to flash the B324 recovery, so I thought, on my L09, but afterwards, I'm stuck in recovery mode. My phone says I should use Hisuite tool to recovery system. But of course, HiSuite says my phone is not connected.
I am getting the Error message: Func NO: 10 (FUNC_BOOT_RECOVERY) and Error NO: 2.
What can I do to get back to whatever version works?
Click to expand...
Click to collapse
Hi guys,
never mind. If anyone else ever makes this stupid mistake, please do the following:
connect your phone to your pc,
hold volume down and then power untill you reach fastboot mode
open your CMD in the folder where your adb and recovery is located
type fastboot devices. If you see a long number, you are good to go
type fastboot flash recovery recovery.img (if you have the right one)
And all was well over here!

Huawei P9 Brick( The easiest way to unbrick)

1. First Turn off your Device (If you can't then Drain The Battery)
2. HOLD Volume Down & Connect to USB ( Now your phone will boot to fastboot )
3. DOWNLOAD ADB & Fastboot on your Computer. Link - https://mega.nz/#F!sSZDmYiA!RnMmcG88-nvqQj7UNPrPZw
4. Extract your stock firmware via Huawei UPDATE.app Extractor Software (Recovery only)
If you're on Marshmallow Before then extract Marshmallow Firmware
If you're on Nougat Before then extract Nougat Firmware
Huawei UPDATE.app Extractor Software
Link - https://mega.nz/#F!JGh2QLYD!Z1OG8HtbWt1i4XvL6WOt3Q
Now Copy Recovery AND paste into ADB & Fastboot FOLDER
Now DOWNLOAD TWRP
If you're on Marshmallow Before than DOWNLOAD From this link
https://dl.twrp.me/eva/twrp-3.1.1-0-eva.img.html
If you're on Nougat Before than DOWNLOAD From this link
https://mega.nz/#!1HoVmDoa!9ifPg7yfEKfCRfbVI04Qvsbt49PAjA3MO72RoD4EPnc
Now Copy twrp AND paste into ADB & Fastboot FOLDER & Rename twrp
5. Open ADB & Fastboot FOLDER
6. HOLD Shift Key & Right Click on empty place of this FOLDER
7. Click on OPEN COMMAND WINDOW HERE
8. Type - fastboot oem unlock (UNLOCK KEY) --- Skip this step if your BOOTLOADER is UNLOCKED
Now press Enter Key
9. Type - fastboot flash recovery Recovery.img
Now press Enter Key
10. Type - fastboot flash recovery twrp.img
Now press Enter Key
11. Now HOLD Volume Up & Power Button AND Release Volume Up Button when you see Huawei Logo & Just HOLD Vol Up
12. Now flash custom rom
If you're on Marshmallow Before than DOWNLOAD From this link
https://www.androidfilehost.com/?fid=457095661767122613
If you're on Nougat Before than DOWNLOAD From this link
https://www.androidfilehost.com/?fid=889764386195922724
13. Now DOWNLOAD Stock firmware (If you ALREADY DOWLOAD it then skip this step)
14. Extract Your Firmware Copy dload FOLDER & Paste into root Directory of your Memory CARD
15. Go to twrp - wipe - swipe to factory
16. Turn off your phone
17. HOLD Volume Up & Down also Power Button until your Device boot to DOWNLOAD MODE
Now your stock firmware will be installED
Enjoy you unbrick your Huawei P9
Hit the thanks :good: button if you Happy to My Work
Note — If you didn't to use Huawei UPDATE.app extractor Software then check this link
If you didn't now how to flash a custom rom then you should learn it before flashing

Hi,
I was on B386 before (Nougat)
Flashing RR-N-v5.8.4 gives this error:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
Updater process ended with ERROR 7
Any idea ?
Thanks !
PS : This error also prevents me to install B390, B383, B182. Only B360 can be installed from TWRP.

XavierP56 said:
Hi,
I was on B386 before (Nougat)
Flashing RR-N-v5.8.4 gives this error:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
Updater process ended with ERROR 7
Any idea ?
Thanks !
PS : This error also prevents me to install B390, B383, B182. Only B360 can be installed from TWRP.
Click to expand...
Click to collapse
Try to install Lineage 14.1

problem
my p9 i do the things as you saying but it when it goes on fastboot stack on screen your devise is booting now...wont open and at adb says waiting for devise nothing else what to do ?

To get into fastboot mode you keep the phone plugged into computer and hold power and volume down until you get to the white fastboot screen.
There is no need to wait for the battery to drain as you can just force shut down a phone using power + volume down holding.

Huawei p9 EVA-L09
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.

Follow my guide, post #7! Leave feedback and a thanks!
https://forum.xda-developers.com/showpost.php?p=74169408

phone is booting but screen doesnt turn on
the phone is booting and dload method is working but the issue is the screen is just blank after huawei logo but is not in loop as it is not booting continuosly its blank forever

nothing helps
Hi
I came here because i tried to install miui on my P9 via trwp , somehow it wasnt mountable and after searching the internet i found the solution was to change the filetype.
Sadly i forgot that this would delete my backup, which happened and the miui still wasnt mountable.
I tried your method but after a few miliseconds of the forced update it gets an error and stops.
Or lets say i tried your method while being in trwp recovery mode because otherwise no devices are being detected by adb tool.
i tried to install a p9 stock rom but i cant even mount that one, somehow nothing works.
I seriously dont know what to do anymore.

Try this...
Try to flash downgrade firmware...
Rollback Instructions
Step 1. Download the appropriate rollback firmware
Step 2. Copy the extracted dload folder to the external storage of your phone (micro sd card).
Step 4. Disconnect the USB cable and turn your phone off.
Step 5. Now hold Volume up + Volume down + Power buttons until the installation screen appears.
Step 6. When the phone restarts after completing the installation, your firmware version should now be “B300”.
Step 7. Try to find oldest marshmallow firmware and flash it using same way...

I want to android 6.0 as twrp. How ? Pls

That is only for unlocked bootloader??

Link in Step 12 for Nougat s broken

JaayTee said:
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Click to expand...
Click to collapse
Same problem plzzzzzzzzzz help!!!!

I can't access anything but "your device is booting now" screen - after this phone automaticly shuts down
pls help!!!

Trying to follow the guide but cannot even get to fastboot mode.
Trying to follow the guide but cannot even get to fastboot mode.
With phone off and pressing down-vol and power, it gets straight to:
Func NO: 11 (recovery image) Error NO: 2 (load failed!)
Am i doing something wrong? Help appreciated.
Cheers

Bricked p9
Blak Rider said:
Same problem plzzzzzzzzzz help!!!!
Click to expand...
Click to collapse
JaayTee said:
Hi there, i am having an issue when flashing RECOVERY or any .IMG into my phone... It is in fastboot mode And i am getting an error when flashing img file , Error : Command Not allowed ...... YES i know what ur going to say (Enable OEM unlock)or(Enable usb debugging in setting) But the problem is that I cannot boot into OS nor recovery, I am stuck on the (Your Device is unlocked and can't be trusted (1)Press power key to continue ECT..... Is there any way Beside Enabling OEM unlock method to fix this or enabling me to gain access to flash recovery or any img file without Command not allowed error ?Ive recently Installed this rom https://forum.xda-developers.com/p9/development/rom-ncs-rom-v1-1-08-16-2016-t3440269 idk if that is part of the Issue Would be Much appreciated for the help
Forgot to mention that doing the 3 buttom method to restore using DLOAD , I get stuck on the HUAWEI logo and doesnt seem to boot into the Updating state.
Click to expand...
Click to collapse
Hello
I have exactly the same problem.
OTA with dload doesnt work - dont load ota recovery,just huawei logo loop
fastboot recovery is booted, but when I try steps in main thread I getting Error : Command Not allowed even if I try unlock the bootloader.
Do have somebody solution for it? Every idea is good. I dont want to put this phone to the trash
Thank You

mdoom said:
Hello
I have exactly the same problem.
OTA with dload doesnt work - dont load ota recovery,just huawei logo loop
fastboot recovery is booted, but when I try steps in main thread I getting Error : Command Not allowed even if I try unlock the bootloader.
Do have somebody solution for it? Every idea is good. I dont want to put this phone to the trash
Thank You
Click to expand...
Click to collapse
In Fastboot, is it FRP locked and/or Bootloader locked?

zgfg said:
In Fastboot, is it FRP locked and/or Bootloader locked?
Click to expand...
Click to collapse
both are locked.
When i try to unlock bootloader,i getting the error message.
FRP lock is not possible to unlock becouse phone dont wont start.
any chance?

mdoom2 said:
both are locked.
When i try to unlock bootloader,i getting the error message.
FRP lock is not possible to unlock becouse phone dont wont start.
any chance?
Click to expand...
Click to collapse
That's the problem, when playing with ROMs you must take carw that you keep OEM Unlocked.
Maybe DC-Unlocker (paid) can help
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial

I tried upgrading to 8 beta version and now I got this

"Please update system again, Func no : 8 (hifi image), Error no : 1 (security verify failed)"
Sometimes it says
ERROR MODE:
PLEASE update system again:
FUNC NO: 11 (recovery image)
ERROR NO: 2 (load failed)
Is it possible to fix this?
I was in trying to update Oreo beta version from bln nougat and something failed while updating on screen at 50% and now I got these errors... I'm able to flash recovery_ramdisk via fastboot but I still get those errors.
Please, anybody help?

evjgl said:
"Please update system again, Func no : 8 (hifi image), Error no : 1 (security verify failed)"
Sometimes it says
ERROR MODE:
PLEASE update system again:
FUNC NO: 11 (recovery image)
ERROR NO: 2 (load failed)
Is it possible to fix this?
I was in trying to update Oreo beta version from bln nougat and something failed while updating on screen at 50% and now I got these errors... I'm able to flash recovery_ramdisk via fastboot but I still get those errors.
Please, anybody help?
Click to expand...
Click to collapse
I can enter recovery via volume up and down with power button...pressing them all together. But the partitions don't seem to exist. I can't wipe nor install update zips. Help ? PLEASE

evjgl said:
"Please update system again, Func no : 8 (hifi image), Error no : 1 (security verify failed)"
Sometimes it says
ERROR MODE:
PLEASE update system again:
FUNC NO: 11 (recovery image)
ERROR NO: 2 (load failed)
Is it possible to fix this?
I was in trying to update Oreo beta version from bln nougat and something failed while updating on screen at 50% and now I got these errors... I'm able to flash recovery_ramdisk via fastboot but I still get those errors.
Please, anybody help?
Click to expand...
Click to collapse
Tell me your model no and bootloader is lock or unlock

siddhrsh said:
Tell me your model no and bootloader is lock or unlock
Click to expand...
Click to collapse
I was BLN-L22C675B340 then rebranded to CHINESE version and then tried to restore the oeminfo to And I'm back to BLN-L22C675B340. Unlocked . I can't access to TWRP recovery now, idk what happened

I also tired flashing TWRP through recovery_ramdisk
And it didn't work. I used the command fastboot flash recovery_ramdisk BLN_twrp.img and it doesn't lead me to recovery either. I'm stuck at those errors and only able to enter fastboot. Please help ?

evjgl said:
And it didn't work. I used the command fastboot flash recovery_ramdisk BLN_twrp.img and it doesn't lead me to recovery either. I'm stuck at those errors and only able to enter fastboot. Please help
Click to expand...
Click to collapse
Use oreo update.app and extract recovery from it then flash it then use sdcard download b360 package and bln-l22 update.app and use dload method it will boot but lock the bootloader so flash 3.56gb package first

There are many different recovery images in it
I have three for recovery. Recovery_ramdis.img recovery_vendor.img and recovery_vbmeta.img
Also recovery2 images which one should I use?

BLN-L22C675B340 update zip (update app package) doesn't work? Why b360? I'll Google and download it right away then

It's stuck there
I flashed the Oreo recovery and used sd update method with the folder close and the update.app from BLN-L22C675B340 but that's all I get. I can't boot into the recovery...only plugging the USB + volume up&down button and power on...but instead of emui update, it shows something like and USB cable...if I stick the USB cable it gets stuck in 5% and does nothing...if I remove it and install it says software install failed

Still not working
siddhrsh said:
Use oreo update.app and extract recovery from it then flash it then use sdcard download b360 package and bln-l22 update.app and use dload method it will boot but lock the bootloader so flash 3.56gb package first
Click to expand...
Click to collapse
It goes to error mode
FUNC NO: 11 (RECOVERY IMAGE)
ERROR NO: 2 (LOAD FAILED)
Thank you anyways. I think it is definitely bricked

evjgl said:
It goes to error mode
FUNC NO: 11 (RECOVERY IMAGE)
ERROR NO: 2 (LOAD FAILED)
Thank you anyways. I think it is definitely bricked
Click to expand...
Click to collapse
No
Reboot to bootloader by holding volume down and plug usb
Then use the update.app(from oreo package) and extract using Huawei extrector if there is error while checking file turn off in extractor settings then extract recovery from it and flash stock recovery then ise dload method b360 i have also got this error i have solved it now
Or
1.Download team mt multi tool then tick on emui 8 on top right corner
2.go to unbrick section and launch Huawei extractor
3.extract update.app from update.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3196/g1699/v137893/f2/full/update.zip
4.open update.app and extract recovery
5.go to recovery section in multi tool and flash it
6.use dload method

siddhrsh said:
No
Reboot to bootloader by holding volume down and plug usb
Then use the update.app(from oreo package) and extract using Huawei extrector if there is error while checking file turn off in extractor settings then extract recovery from it and flash stock recovery then ise dload method b360 i have also got this error i have solved it now
Or
1.Download team mt multi tool then tick on emui 8 on top right corner
2.go to unbrick section and launch Huawei extractor
3.extract update.app from update.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3196/g1699/v137893/f2/full/update.zip
4.open update.app and extract recovery
5.go to recovery section in multi tool and flash it
6.use dload method
Click to expand...
Click to collapse
Thank you. I still get the error Recovery image, load failed
Sometimes says HiFi image error.

evjgl said:
Thank you. I still get the error Recovery image, load failed
Sometimes says HiFi image error.
Click to expand...
Click to collapse
Download twrp from this
https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
Extract zip and try recovery from recovery folder

siddhrsh said:
Download twrp from this
https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
Extract zip and try recovery from recovery folder
Click to expand...
Click to collapse
TWRP from hwota8 works. But I can't install anything and make the system works. Only TWRP works

evjgl said:
TWRP from hwota8 works. But I can't install anything and make the system works. Only TWRP works
Click to expand...
Click to collapse
Wipe all partition and then try thishttps://forum.xda-developers.com/honor-6x/how-to/guide-procedure-to-install-update-t3793407

It sort of worked
It flashed them all. The only thing that was kinda weird is that it said that there was no recovery.img found in the external sd card. Then... I rebooted and it's stuck with the honor bootanimation

Thank you
evjgl said:
It flashed them all. The only thing that was kinda weird is that it said that there was no recovery.img found in the external sd card. Then... I rebooted and it's stuck with the honor bootanimation
Click to expand...
Click to collapse
All I did was the obvious that I had forgotten. I wiped again everything to factory reset and it's finally working. Thank you so much for your time and help again, dude. I'm not touching my phone's system until the official update to Oreo is launched LOL. Have a great rest of the day

evjgl said:
All I did was the obvious that I had forgotten. I wiped again everything to factory reset and it's finally working. Thank you so much for your time and help again, dude. I'm not touching my phone's system until the official update to Oreo is launched LOL. Have a great rest of the day
Click to expand...
Click to collapse
Hit like button

Bricked Honor 8 FRD-L04

I will provide as much information as possible.
The last time my phone was working, it was had build number FRD-L04C567B402.
I wanted to install the Oreo update, so I unlocked my bootloader and install TWRP for honor 8. Everything was working at this point.
I attempted to update my phone using the rom L04C567B560 and the methods provided in the thread below (HuRUpdater method)
https://forum.xda-developers.com/honor-8/how-to/guide-how-to-install-oreo-update-t3825078
It was when I attempted to install oreo my phone bricked. When I turned it on, it would attempt to boot multiple times, and then go into recovery mode.
I used the dload method to try to reflash stock rom. The installation would stop and 5% then give an error. This method failed.
I used the Huawei Extractor and multi Tool to flash a stock rom. I got the error "the size or path does not match the file system markup." This method failed.
I used adb and bootloader to flash boot.img and recovery.img directly on the device. I got the error "FAILED (remote: partition length get error)". This method failed.
After some browsing I found the following thread and attempted to used it.
https://forum.xda-developers.com/honor-8/how-to/guide-comprehensive-method-to-unbrick-t3632998
I completed up to step 8, and that package installed. Notice how the guide mentions the phone is still bricked.
After that update.app got installed, the phone went into a endless boot loop.
Now when device bootloops to this default screen
ERROR Mode
Func NO: 8 (hifi image)
Error NO: 1(security verify failed)
When I press vol+ and power, I see on my device
ERROR Mode
Func NO: 8 (hifi image)
Error NO: 1(security verify failed)
When I press vol+, vol- and power, I see on my device
Func NO : 11 (recovery image)
Error NO : 2 (load failed!)
I can still enter fastboot mode, but erecovery is no longer available. TWRP is also not available.
When I attempt to flash anything (recovery.img, system.img, boot.img) in fastboot mode. I get the error "FAILED (remote: partition length get error)".
Currently unsure what to do next. Any suggestions?