Hi Guys,
can you help me out? I used flashify to flash the B324 recovery, so I thought, on my L09, but afterwards, I'm stuck in recovery mode. My phone says I should use Hisuite tool to recovery system. But of course, HiSuite says my phone is not connected.
I am getting the Error message: Func NO: 10 (FUNC_BOOT_RECOVERY) and Error NO: 2.
What can I do to get back to whatever version works?
dekraan said:
Hi Guys,
can you help me out? I used flashify to flash the B324 recovery, so I thought, on my L09, but afterwards, I'm stuck in recovery mode. My phone says I should use Hisuite tool to recovery system. But of course, HiSuite says my phone is not connected.
I am getting the Error message: Func NO: 10 (FUNC_BOOT_RECOVERY) and Error NO: 2.
What can I do to get back to whatever version works?
Click to expand...
Click to collapse
Hi guys,
never mind. If anyone else ever makes this stupid mistake, please do the following:
connect your phone to your pc,
hold volume down and then power untill you reach fastboot mode
open your CMD in the folder where your adb and recovery is located
type fastboot devices. If you see a long number, you are good to go
type fastboot flash recovery recovery.img (if you have the right one)
And all was well over here!
Hello, I think I´ve got a serious problem with my Huawei Ascend Mate 7.
When it attempts to boot up following error-message is displayed:
Rescue-mode
Attention, please update System again.
Func No: 9 (FUNC_BOOT_KERNEL)
Error NO : 2
When I want to enter the recovery with power button and volume up, there is also a error message as following:
Func No : 10 (FUNC_BOOT_RECOVERY)
Error No: 2
Even the force update 3 buttons method doesn't work either.
When I put the UPDATE.APP in the dload folder in the root of the SD-card and attempt to perform the update its stuck at the Huawei "power on" logo.
I also tried to flash different recovery and boot.imgs . I flashed every time the same error-message is displayed. Even i was not able to enter the recovery. (But fastboot recognition and executing commands like "flash" and so on works)
So I am out of ideas, every kind of help is appreciated.
Did you manage to solve it? I have that same problem
respberryjams said:
Hello, I think I´ve got a serious problem with my Huawei Ascend Mate 7.
When it attempts to boot up following error-message is displayed:
Rescue-mode
Attention, please update System again.
Func No: 9 (FUNC_BOOT_KERNEL)
Error NO : 2
When I want to enter the recovery with power button and volume up, there is also a error message as following:
Func No : 10 (FUNC_BOOT_RECOVERY)
Error No: 2
Even the force update 3 buttons method doesn't work either.
When I put the UPDATE.APP in the dload folder in the root of the SD-card and attempt to perform the update its stuck at the Huawei "power on" logo.
I also tried to flash different recovery and boot.imgs . I flashed every time the same error-message is displayed. Even i was not able to enter the recovery. (But fastboot recognition and executing commands like "flash" and so on works)
So I am out of ideas, every kind of help is appreciated.
Click to expand...
Click to collapse
Did you manage to solve it? I have that same problem
See this thread :-
https://forum.xda-developers.com/mate-7/help/error-func-no12-funcloadiom3-error-no1-t3283730
It may help.
Udiaz688 said:
Did you manage to solve it? I have that same problem
Click to expand...
Click to collapse
If you have access to boot loader then you have a chance to survive.
All you need is a pc or laptop and a tool SRK link below
https://www.androidfilehost.com/?fid=24572369242687273
Just download it and fallow the institutions
1st one is unlock the boot loader if it's locked and if already unlock then no need to do that
2nd is to install twrp recovery
If you done with that download a custom rom sir Ale is offering stable roms for Android 6.0 and 6.0.1
Download as you desire one thing that you have to flash same version of Android that was you have in yor mate 7 some twrp backups of different version of Android link below thanks to sir Chudy
https://forum.xda-developers.com/mate-7/general/huawei-mt7-l09-l10-stock-firmware-ota-t3275784
Fallow the institutions in post and you done...
"Please update system again, Func no : 8 (hifi image), Error no : 1 (security verify failed)"
Sometimes it says
ERROR MODE:
PLEASE update system again:
FUNC NO: 11 (recovery image)
ERROR NO: 2 (load failed)
Is it possible to fix this?
I was in trying to update Oreo beta version from bln nougat and something failed while updating on screen at 50% and now I got these errors... I'm able to flash recovery_ramdisk via fastboot but I still get those errors.
Please, anybody help?
evjgl said:
"Please update system again, Func no : 8 (hifi image), Error no : 1 (security verify failed)"
Sometimes it says
ERROR MODE:
PLEASE update system again:
FUNC NO: 11 (recovery image)
ERROR NO: 2 (load failed)
Is it possible to fix this?
I was in trying to update Oreo beta version from bln nougat and something failed while updating on screen at 50% and now I got these errors... I'm able to flash recovery_ramdisk via fastboot but I still get those errors.
Please, anybody help?
Click to expand...
Click to collapse
I can enter recovery via volume up and down with power button...pressing them all together. But the partitions don't seem to exist. I can't wipe nor install update zips. Help ? PLEASE
evjgl said:
"Please update system again, Func no : 8 (hifi image), Error no : 1 (security verify failed)"
Sometimes it says
ERROR MODE:
PLEASE update system again:
FUNC NO: 11 (recovery image)
ERROR NO: 2 (load failed)
Is it possible to fix this?
I was in trying to update Oreo beta version from bln nougat and something failed while updating on screen at 50% and now I got these errors... I'm able to flash recovery_ramdisk via fastboot but I still get those errors.
Please, anybody help?
Click to expand...
Click to collapse
Tell me your model no and bootloader is lock or unlock
siddhrsh said:
Tell me your model no and bootloader is lock or unlock
Click to expand...
Click to collapse
I was BLN-L22C675B340 then rebranded to CHINESE version and then tried to restore the oeminfo to And I'm back to BLN-L22C675B340. Unlocked . I can't access to TWRP recovery now, idk what happened
I also tired flashing TWRP through recovery_ramdisk
And it didn't work. I used the command fastboot flash recovery_ramdisk BLN_twrp.img and it doesn't lead me to recovery either. I'm stuck at those errors and only able to enter fastboot. Please help ?
evjgl said:
And it didn't work. I used the command fastboot flash recovery_ramdisk BLN_twrp.img and it doesn't lead me to recovery either. I'm stuck at those errors and only able to enter fastboot. Please help
Click to expand...
Click to collapse
Use oreo update.app and extract recovery from it then flash it then use sdcard download b360 package and bln-l22 update.app and use dload method it will boot but lock the bootloader so flash 3.56gb package first
There are many different recovery images in it
I have three for recovery. Recovery_ramdis.img recovery_vendor.img and recovery_vbmeta.img
Also recovery2 images which one should I use?
BLN-L22C675B340 update zip (update app package) doesn't work? Why b360? I'll Google and download it right away then
It's stuck there
I flashed the Oreo recovery and used sd update method with the folder close and the update.app from BLN-L22C675B340 but that's all I get. I can't boot into the recovery...only plugging the USB + volume up&down button and power on...but instead of emui update, it shows something like and USB cable...if I stick the USB cable it gets stuck in 5% and does nothing...if I remove it and install it says software install failed
Still not working
siddhrsh said:
Use oreo update.app and extract recovery from it then flash it then use sdcard download b360 package and bln-l22 update.app and use dload method it will boot but lock the bootloader so flash 3.56gb package first
Click to expand...
Click to collapse
It goes to error mode
FUNC NO: 11 (RECOVERY IMAGE)
ERROR NO: 2 (LOAD FAILED)
Thank you anyways. I think it is definitely bricked
evjgl said:
It goes to error mode
FUNC NO: 11 (RECOVERY IMAGE)
ERROR NO: 2 (LOAD FAILED)
Thank you anyways. I think it is definitely bricked
Click to expand...
Click to collapse
No
Reboot to bootloader by holding volume down and plug usb
Then use the update.app(from oreo package) and extract using Huawei extrector if there is error while checking file turn off in extractor settings then extract recovery from it and flash stock recovery then ise dload method b360 i have also got this error i have solved it now
Or
1.Download team mt multi tool then tick on emui 8 on top right corner
2.go to unbrick section and launch Huawei extractor
3.extract update.app from update.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3196/g1699/v137893/f2/full/update.zip
4.open update.app and extract recovery
5.go to recovery section in multi tool and flash it
6.use dload method
siddhrsh said:
No
Reboot to bootloader by holding volume down and plug usb
Then use the update.app(from oreo package) and extract using Huawei extrector if there is error while checking file turn off in extractor settings then extract recovery from it and flash stock recovery then ise dload method b360 i have also got this error i have solved it now
Or
1.Download team mt multi tool then tick on emui 8 on top right corner
2.go to unbrick section and launch Huawei extractor
3.extract update.app from update.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3196/g1699/v137893/f2/full/update.zip
4.open update.app and extract recovery
5.go to recovery section in multi tool and flash it
6.use dload method
Click to expand...
Click to collapse
Thank you. I still get the error Recovery image, load failed
Sometimes says HiFi image error.
evjgl said:
Thank you. I still get the error Recovery image, load failed
Sometimes says HiFi image error.
Click to expand...
Click to collapse
Download twrp from this
https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
Extract zip and try recovery from recovery folder
siddhrsh said:
Download twrp from this
https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
Extract zip and try recovery from recovery folder
Click to expand...
Click to collapse
TWRP from hwota8 works. But I can't install anything and make the system works. Only TWRP works
evjgl said:
TWRP from hwota8 works. But I can't install anything and make the system works. Only TWRP works
Click to expand...
Click to collapse
Wipe all partition and then try thishttps://forum.xda-developers.com/honor-6x/how-to/guide-procedure-to-install-update-t3793407
It sort of worked
It flashed them all. The only thing that was kinda weird is that it said that there was no recovery.img found in the external sd card. Then... I rebooted and it's stuck with the honor bootanimation
Thank you
evjgl said:
It flashed them all. The only thing that was kinda weird is that it said that there was no recovery.img found in the external sd card. Then... I rebooted and it's stuck with the honor bootanimation
Click to expand...
Click to collapse
All I did was the obvious that I had forgotten. I wiped again everything to factory reset and it's finally working. Thank you so much for your time and help again, dude. I'm not touching my phone's system until the official update to Oreo is launched LOL. Have a great rest of the day
evjgl said:
All I did was the obvious that I had forgotten. I wiped again everything to factory reset and it's finally working. Thank you so much for your time and help again, dude. I'm not touching my phone's system until the official update to Oreo is launched LOL. Have a great rest of the day
Click to expand...
Click to collapse
Hit like button
Update:
I've got my phone back thanks to this post! https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
--------------------------------------[/B]-----------------------------------------------------------------------------------------------------------------------------------------------
I successfully upgraded my NXT-L29 to Oreo, using the files in this post: https://forum.xda-developers.com/mate-8/general/discussion-oreo-huawei-mate-8-t3785320
(Only difference: used another TWRP version - twrp-3.1.1-1-next.img - since the one in this post didn’t work).
Though my phone worked, it was unrooted again and I tried to solve it by flashing TWRP again. It didn’t work, so I tried flashing TWRP-3.1.0-EMUI-5.0.img. Here’s where everything went wrong.
I get:
ERROR MODE, Please update system again!"
Error! Func: NO: 11 (recovery image)
Error NO: 2 (load failed!)
Here’s what I still can do:
- Get into Fastboot – Bootloader and FRP both Unlocked
- Use ADB
- Get into eRovery
- Get into EMUI update
- Flash TWRP, SYSTEM.img and BOOT.img
What I can’t do:
- Access my phone – get or one of the two yellow messages or Error Mode or Fastboot
- Connect to HiSuite
- Acces Wipe Partion, Factory Settings
- Boot into TWRP
- Flash any Recovery (partition: (length) error, or Cannot load Recovery). No matter what command I try. Fastboot flash recovery_ramdisk RECOVERY.img doesn’t work either.
- Find a RAMDISK.img in the Update.app. Flashing the SYSTEM, CUST and BOOT.img won’t do the trick with rebooting volume up + volume down + power. EMUI update states: Software install failed!
- Use eRovery. Recovery fails every time after 7%
- Find the current Build Number, since there’s no way of getting passed the two yellow messages or Error Mode or Fastboot
I’ve been up till 5 in the morning, trying to solve this without success. Think I’ve tried a 100 commands and methods. Is there anyone who has a solution? I’m really desperate by now.
HQuinn said:
I successfully upgraded my NXT-L29 to Oreo, using the files in this post: https://forum.xda-developers.com/mate-8/general/discussion-oreo-huawei-mate-8-t3785320
(Only difference: used another TWRP version - twrp-3.1.1-1-next.img - since the one in this post didn’t work).
Though my phone worked, it was unrooted again and I tried to solve it by flashing TWRP again. It didn’t work, so I tried flashing TWRP-3.1.0-EMUI-5.0.img. Here’s where everything went wrong.
I get:
ERROR MODE, Please update system again!"
Error! Func: NO: 11 (recovery image)
Error NO: 2 (load failed!)
Here’s what I still can do:
- Get into Fastboot – Bootloader and FRP both Unlocked
- Use ADB
- Get into eRovery
- Get into EMUI update
- Flash TWRP, SYSTEM.img and BOOT.img
What I can’t do:
- Access my phone – get or one of the two yellow messages or Error Mode or Fastboot
- Connect to HiSuite
- Acces Wipe Partion, Factory Settings
- Boot into TWRP
- Flash any Recovery (partition: (length) error, or Cannot load Recovery). No matter what command I try. Fastboot flash recovery_ramdisk RECOVERY.img doesn’t work either.
- Find a RAMDISK.img in the Update.app. Flashing the SYSTEM, CUST and BOOT.img won’t do the trick with rebooting volume up + volume down + power. EMUI update states: Software install failed!
- Use eRovery. Recovery fails every time after 7%
- Find the current Build Number, since there’s no way of getting passed the two yellow messages or Error Mode or Fastboot
I’ve been up till 5 in the morning, trying to solve this without success. Think I’ve tried a 100 commands and methods. Is there anyone who has a solution? I’m really desperate by now.
Click to expand...
Click to collapse
Hi.
According to your post, you flashed TWRP-3.1.0-EMUI-5.0.img then got the problems .
Did you try to flash stock recovery by adb?
You can find it in original ROM files
afromoh said:
Hi.
According to your post, you flashed TWRP-3.1.0-EMUI-5.0.img then got the problems .
Did you try to flash stock recovery by adb?
You can find it in original ROM files
Click to expand...
Click to collapse
Yes, I've tried that about a million times. Everything worked, except flashing the (stock) recovery.
I'm really sorry for my late reply. I've been very ill. Luckily the problem is solved and I've got my phone back. Thanks to Georgian51 who suggested this post: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279.
That did the trick! Thanks for your reply
I initially had installed oxygenOS 12, then rollbacked to oxygenOS 11 without ADB, using the system update method. Then I unlocked the bootloader and enabled USB debugging. Then rebooted into fastboot mode and according to the guide here, I used the command "fastboot update aospa-sapphire-2-oneplus8-alpha-20220118-image.zip" to try to flash Paranoid Android in my phone...and here's where the problem occurs: it gets stuck at "<waiting for device>" till I reboot the phone into fastboot again and when I do it throws the error: "fastboot: error: Failed to boot into userspace fastboot; one or more components might be unbootable." (I have also attached the error message in this post), and ultimately my phone gets bricked. I am able to unbrick it into OxygenOS again but this error keeps happening again when I tried it for the second time. Please help.