Database Info

urgent,really realy urgent

first of alla i wanna say that im really so glad having activated my acount here,n it took me 3 days to have an acoubt here.im here after having tried all the ways to solve my one inn a million htc cruise problems.
first problem:
wen i transfer a programme to my device the programme shows in an unknown format,a small while image with a small widows flag in it,n wen i try to run it,a msg shows saying :no application is associated to ..(the name of the file i run)...run the application first n then open this file throgh it.
second dilema:
i tried to unlock my phone so i cud use my sim card,i did all the steps n used the polaris programme.after finishing the operation a msg appeared to tell me that im already sim unlocked,but wen i insert my SIM it still tells me to write a code,SO IT IS NOT WORKING.
third problem:
the camera is not working,wen i run the camera a msg appears saying:
A PROBLEM HAS OCCURED WHILE OPENING THE SHORTCUT OR WHILE LUKING FOR THE FILE DEVICE.
pleassssssssssssssssssssssssssssse i want to solve all my problems,
so is there any help
some pictures to tell wat happened
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.monsterup.com/upload/1239623230975.jpg

Dude its asking for your Sim pin and not Network lock Code....
Every New or old sim usually has a 4 digit code.. which can be changed n disabled from phone. you phone is sim unlocked which means .. u can use any service provider sim in it. but u need to know ur sim code... if you have lost it..then u can go the ur service provider and say that u have lost ur sim and they will give you a new sim with same no. and then you can use that..
hope this helps..

Guide: A50 (Garminfone). How to reset to 10 tries to enter unlock code

I bought a ebay Garminfone (it's my second) and it came with 1 attempt left to enter the code. I've ordered the code, but I wanted better odds than 1 try.
Hold D-Pad left while powering on. Hold D-Pad LEFT until the next line appears:
"Wipe userdata" appears on the screen. It can take a few minutes to run its course.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It wipes EVERYTHING off the phone. Just be warned.
I did a Master Clear when it restarted, just for good measure. I have no idea if I needed to or not. I had a T-Mo SIM card (unregistered) to be able to access the Master Clear section. It may work without doing the Master Clear.
But it does reset the counter to 10 tries!
This process may even work on a HARD LOCKED phone that shows 0 attempts left, but I have not had cause to try that. This method wipes everything on the phone and restores it with the hidden/secure recovery image. Hard Lock seems to be a software issue, which can probably be changed with this method.
After I did this, I changed the .update file to the Canadian one for Videotron. The 10 tries stuck!
I am just waiting for my unlock code to give it a try.
I think it's pretty safe to buy used phones that claim not to read the SIM card etc now. Updating the old 1.6 version to 2.1 fixes that. D-Pad left + power fixes almost everything else.
This process should be able to recover from anything except if you've screwed up the bootloader or the hidden recovery image.

this method does not work on my hardlock phone, i try to update but no sucess, it hang up after rebooting in the first line until i remove battery pls any one know solution to this

segun4u said:
this method does not work on my hardlock phone, i try to update but no sucess, it hang up after rebooting in the first line until i remove battery pls any one know solution to this
Click to expand...
Click to collapse
pls someone help me here, i have code to unlock but phone is hardlock,

[Discussion] Need Help in Unbricking redmi note 3 Snapdragon

Here is the short story. I followed the unofficial method of unlocking bootloader. I did that and managed to install twrp then i flashed CM14. However, it proved to be not working (Stuck at CM Logo). I also noticed that in TWRP it has an error which is E: Failed to mount /persist. So yeah, i revert back to MIUI and relock it. I managed to reflash to 7.1.8.0 global beta but the problem is there are so many bugs like No wifi detected and no sim data making it unusable to do any internet plus brightness isn't working.
So, this is the true problem came. I followed Raaj52's instruction and want to flash the latest Fastboot rom Developer (which is 6.7.29 global) but i got stuck with Unspecified error when i follow Raaj's instruction. When i do miflash and flash in EDL mode, it got stuck with Not enough storage is available to continue. Please help me, i have redmi phone just and want to use it again.
In addition, can someone please explain to me about:
1. Why E: Failed to mount /persist in TWRP happens?
2. Why Wifi cant detect any hotspot and sim card has no service at all?
3. Why do i have Unspecified error when flashing in Fastboot mode?
4. Why do i have Not storage is available to continue error in EDL mode?
Thank you and hope someone can help me.
PS: I use Miflash 20151028, Anz Folder, Unlocked Bootloader folder and Fastboot_edl folder as well as fastboot ROM downloaded. I also post similar thread in http://en.miui.com/forum.php?mod=viewthread&tid=433772&page=1&extra=#pid8058468 in hoping that someone can help me.
P.S: The Device codename is Kenzo (Xiaomi Redmi Note 3 Pro Snapdragon Version) and here is the picture needed for you guys to help me figuring this out.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hardbricked - System destroyed!

Hello!
I was disappointed about some missing features in MIUI ( unable to unlock by bluetooth by not Xiaomi devices, no reliable notification LED,.. ) so I decided to flash Android P ( I know, it´s beta, but it´s AOSP ) by using the Xiaomi Flash Tool. I left the button at 'clean and lock', because I don´t wanted to go back in the near future - and this was a big mistake! The tool shown after flashing 'successful', but since then the Mix2s shows 'system destroyed - push power button to switch off' on booting. I get access by fastboot, but the bootloader is now locked....
I´ve tried to get access by deepflash, but the problem is, that if I connect it to USB the phone switches on and shows the mentined message - again and again. I´m not able to switch it off, to get the connection by qualcomm drivers to USB. I tried to push and hold the power button very long, push all buttons together and so on...
Has anyone an advice or can tell me about testpoints of the Mix2s ( if it has? )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When in edl mode, only nop and sig tags can be recevied before authentication.
Thanks!

In this thread, some users speak about test points. There is a photo of it
http://en.miui.com/thread-3123002-1-1.html
Edit: Method for Mi Mix 2, maybe this can help you...
http://en.miui.com/thread-1351514-1-1.html

You should send it to customer servt

You can try to contact xiaomi support, they can grant you access to unlock the bootloader without adding an account... However, there were only one or two guys in miui forum who were successful with that, for all the others xiaomi said they can't allow it

What happens when you try to unlock your bootloader? And why cant you unlock it again?

Enter Fastboot and unlock your bootloader again by using xiaomi mi bootloader unlocking tool.

same problem when i've flashed the beta, i had to unlock the bootloader again and the phone boots

[HELP !] Unbrick honor6X BLL-L22

Hello, everyone
I need your help
I was trying to rebrand my BLL-L22 (which was working fine) to BLN-AL20C00
(To upgrade to Oreo)
so since Bootloader unlocking isn't working anymore , I followed this Thread :
[GUIDE]Unbrick honor6X. (No boot. No fastboot. No Recovery. No bootloader code)
the process was easy and clear
but something is messing I guess
I reach the point where my phone phone start working as factory mode
I restart to fastboot and flash the OEM by this code :
Code:
fastboot flash oeminfo BLN-AL20C00
and it's done successfully
then I restart the phone
then I put the UPDATE.APP (of this version: BLN-AL20C00B172) in dload folder
and do the normal dload method , but it doesn't work (says: please insert otg/sd card or check app files in 2 mins)
I think this is because the firmware is differnt from the factory mode system
...
I tried many things like installing TWRP , trying to flash the Update.app contents by fastboot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and still nothing works
..................
I even installed my original oeminfo (BLL-L22C636)
and trying to flash all my firware versions : B150 , B360 , B391 , B396
and alllllll didn't work
...................
so I need to undersatnd why my phone doesn't accept any normal dload files and what can I do ???
I'm even begining to suspect that HL2BLNTMBD001051 isn't compatible with my phone !
but if you are sure that it is the right one , tell me what can I do after reaching the factory mode stage
because my phone doesn't accept dloading anything
​

look at the photo attached
this is when I try to install the Update.app contents by fastboot
(after I restart from this stage , the phone do bootloop , so I start over and try something else)