Hello, everyone
I need your help
I was trying to rebrand my BLL-L22 (which was working fine) to BLN-AL20C00
(To upgrade to Oreo)
so since Bootloader unlocking isn't working anymore , I followed this Thread :
[GUIDE]Unbrick honor6X. (No boot. No fastboot. No Recovery. No bootloader code)
the process was easy and clear
but something is messing I guess
I reach the point where my phone phone start working as factory mode
I restart to fastboot and flash the OEM by this code :
Code:
fastboot flash oeminfo BLN-AL20C00
and it's done successfully
then I restart the phone
then I put the UPDATE.APP (of this version: BLN-AL20C00B172) in dload folder
and do the normal dload method , but it doesn't work (says: please insert otg/sd card or check app files in 2 mins)
I think this is because the firmware is differnt from the factory mode system
...
I tried many things like installing TWRP , trying to flash the Update.app contents by fastboot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and still nothing works
..................
I even installed my original oeminfo (BLL-L22C636)
and trying to flash all my firware versions : B150 , B360 , B391 , B396
and alllllll didn't work
...................
so I need to undersatnd why my phone doesn't accept any normal dload files and what can I do ???
I'm even begining to suspect that HL2BLNTMBD001051 isn't compatible with my phone !
but if you are sure that it is the right one , tell me what can I do after reaching the factory mode stage
because my phone doesn't accept dloading anything
look at the photo attached
this is when I try to install the Update.app contents by fastboot
(after I restart from this stage , the phone do bootloop , so I start over and try something else)
Related
New version of tutorial: http://forum.xda-developers.com/showthread.php?t=2288124
[ROM & ROOT]
Here we are going to install a mix of two ROMs in order to make the phone usable again..
You need to download these files;
SP Flash Tool;
http://www57.zippyshare.com/v/6833714/file.html
e1901;
http://www.4shared.com/file/9bsP-vQV/
e1920 (this should be original system, but when you install just this,
some red triangle appears and system will not continiue to load, so just do it like I will show you in this tutorial);
http://pan.baidu.com/share/link?shareid=506476&uk=4178083362
Then, first you need to flash entire e1901 ROM to your phone, using flash tool..
After that you will need to flash only first six parts of e1920 ROM, it is shown in Pic0;
Pic0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also then download this; http://www47.zippyshare.com/v/70264800/file.html
Flash that recovery.img alone without any other part of ROM (that is Clockworkmod Recovery PORT)..
Now download this file; http://www47.zippyshare.com/v/52522093/file.html
That is ROOT for your phone, you need to put that file on your SD card and then put battery in your cellphone, pres Volume UP and Power Button together, that will send you to CWM recovery, from there install that file from your SD card, and restart your phone..
If it forces you to CWMR, just flash again the first six parts of e1920 ROM, and when you start your phone it should work fine..
But now You will have to SET your IMEI number becouse this is factory ROM, I am actually not sure how to do that, becouse I did not need that ( ..I have my CWM backups from before.. ..) ..so on that one you are on your own, but yes now you have ROOTed working phone again so it should not be that difficult to pull that off..
[UNBRICK]
Now I will post some pictures on how to unbrick your phone in case you get it hard bricked by trying out some other ROMs..
You will need to conect KCOLO and GND(or any other ground surfice on the phone), connect your phone with USB and start flashing the ROMs (like it is explained earlyer), pictures showing how to connect your phone and create a "jumper" are Pic1 and Pic2;
Pic1
Pic2
This will make your phone usable again.. and it is very stable.. maybe later I will try to make even better ROM, but for now this is it..
Special thanx to Mr. Dirk from ColonelZAP who helped me with unbricking the phone!!!
If this little tutorial helpd you just remember to hit THANX button.
*** UPDATE ***
Okay here is the way to enter you imei number;
http://www.youtube.com/watch?v=BW5lSVeMC4g
It will work for sure!
Hi,
I never saw this problem
My phone is unlocked (since a year more or less) and I can't install TWRP nor CWM. I tried many tutorials such as all the root methods listed on XDA for this smartphone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any idea would be really appreciated!
Thanks
There might be a problem with your drivers. You can try uninstalling and reinstalling them. Also, try using fastboot commands manually
Sent from my Mate
unlock again
Thank you. I'd like not to have to relock it as it's already done and rooted. Could you please tell me what drivers to install? I tested many of them (https://i.imgur.com/wBgsezr.png) but it seems I don't have the right ones then.
I'm using Win7 64bits.
Thanks again!
Use adbdriveinstaler and when it's install you can push recovery to add folder and try this command
cd C:/adb
Fastboot flash recovery recovery.img
Change name your twrp or cwm to recovery
Send frome globe
Okay. Here we go
ADB driver installed (https://i.imgur.com/PWrZoHH.png)
Went to flash and... still not allowed.
And in fastboot/rescue mode on my phone it's written PHONE Unlocked.
WTF
BTW, is there any other way to upgrade the phone? Cause every time I go to the software update in the menu i'm told it's up-to-date, but it's not... Android 4.4.2 & EMUI 3.0.
I read about a "local update" but can't find out how to update from the SDcard, I only have OTA.
Bud64 said:
Okay. Here we go
ADB driver installed (https://i.imgur.com/PWrZoHH.png)
Went to flash and... still not allowed.
And in fastboot/rescue mode on my phone it's written PHONE Unlocked.
WTF
BTW, is there any other way to upgrade the phone? Cause every time I go to the software update in the menu i'm told it's up-to-date, but it's not... Android 4.4.2 & EMUI 3.0.
I read about a "local update" but can't find out how to update from the SDcard, I only have OTA.
Click to expand...
Click to collapse
In your screen you have locked bootloader. Unlock againg
Send frome globe
Okay, I sent an email to Huawei, I'll get back in a few days.
Hello . Thank you just for clicking here trying to help me .
Last night i tried to flash the new COS 13.0 . I wiped the system , data, cache partition ( without internal storage ) and then i flashed the zip . i booted the rom, then i tried to get root & xposed but that didn't worked and i wanted to restore the backup with my old ROM ( CM 13 Nightly ) . Surprise !! I got a ton of errors : " Unable to locate \firmware , persist, modem_st1 " and another ones . ok, just re flash the cm nightly and manually install all apps . I do that, then i see a LOOOT of lag on all thing i do . Just a simple swipe ..lag , try to call someone ..lag . text a message ...lag .
I go to the TWRP , trying to make a backup . I got those errors , i will make screenshots .
I searched the problem on google, i run ADB and write the make_ext4fs /dev/block/mmcblk0p15 command but that doesn't change everything .
I didn't lose my IMEI , I CAN MAKE & RECIEVE CALLS
Thanks if you can help me .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Help please
What zip did you flash?
How did upgarade? with incremental?
Contain only changes. DOES NOT CONTAIN FULL ROM
You should not wipe system.
The most secure method is to fastboot latest cos img.
And upgrade from OTA
I flashed a zip from the OnePlus forum, the Untouched Version of the COS13. I cannot post links, sorry.
And it was not a incremental, was the full ROM. I manually wiped the system partition. Is my fault right?
I think the only solution is to backup all my data & completely return to stock via OnePlus Toolbox
Hi guys,
So i got a bricked su6, i turn on the phone, android logo appears and it turns off byitself after few seconds. Cant go to recovery mode aswell, and when i connect to pc i got 6 partitions (as shown in screenshots), and there's a driver called qhsusb_bulk :S
How can i solve it? Please help me!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Someone?
://forum.xda-developers.com/general/help/vodafone-smart-ultra-6-t3143952/post75088617#post75088617
Vodafone_Smart_Turbo_7_VFD500 - RR 7.1 ROM + TWRP 3.0.2 + SP Flash Tool + VFD500_ROM
Hi!
I get a Vodafone_Smart_Turbo_7_VFD500, mt6735m board platform phone bricked and was very dificult to find a working rom, there are a few that boot but after locking the phone screen goes mad...
I fixed a RR rom, still not perfect but is better.
One kwon issue is charging with phone off, screen stays white and on...
I Let here a link with:
SP_Flash_Tool_v5.1916_Win
SP_USB_Win7_Drivers ( Copy to Desktop and execute the shortcut)
Vodafone_Smart_Turbo_7_VFD500_MT6735M_V2.39.1_21122016_6.0 ROM to flash with SP Tool
open_gapps-arm-7.1-nano-20191029.zip
RR-N-v5.8.5-PIXI4_5_4G.zip (Fixed) Rom
TWRP3.0.2-0_VDF500.img Recovey (Use SP Tool with MT6735M_Android_scatter.txt from Vodafone ROM to flash it)
To use SP tool, first install the drivers then open SP tool, search for MT6735M_Android_scatter.txt file. To install full Vodafone ROM click in Download only and select Format All + Download then Download key above and plug USB, to install TWRP unselect all and only select recovery and click in location field, search for TWRP, click in download from above and plug USB ( If faild with error you need to flash all Vodafone ROM first).
After all this, use TWRP to flash RR Rom then Gapps.
Mega.nz Link
I hope this helps you to!!!
Hello everybody
I have a problem, my mobile is blocked. In theory I had this rom Huawei Mate 10 Lite (RNE-L21) RNE-L21C432B133.
I have the bootloader unlocked and I have tried with the DC-Phoenix program to revive it with update.app but when it manages to load all the files it restarts in Erecovery and only allows updating by wifi, shutting down and restarting. If I try to update it tells me that there is an error in the network (I have tried several). And when I restart it is blocked at the beginning trying to load the boot.
I think the version I had was Android 7 and I am trying to install a higher version.
Firmware : RNE-L21C432B133
Device name: RNE-L21
Oeminfo: hw/eu
Let's see if someone could help me.
I can't enter through adb because I didn't have debugging mode activated ... just fastboot.
I also can't unlock the fpr locked
biker_boys said:
In theory I had this rom Huawei Mate 10 Lite (RNE-L21) RNE-L21C432B133.
Click to expand...
Click to collapse
Hello,
just to be sure - in fastboot mode run commands:
fastboot oem get-build-number
fastboot oem get-product-model
fastboot getvar vendorcountry
- If it's okay, download Service ROM
- Unzip tar.gz package , copy the entire dload folder (without unpacking it!) to the root directory of the SD Card .
- Turn off your phone, then use 3 button combo to enter update mode.
This process will erase all your data and will your bootloader again!
(bootloader): RNE-L21C432B133
(bootloader) FBLOCK024848826059a8ee
(bootloader) RNE-L21
The directory on the SD card does not work for me.This is what is shown by pressing the 3 buttons...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
biker_boys said:
bootloader) FBLOCK024848826059a8ee
Click to expand...
Click to collapse
Sorry, I can't help you...
-Alf- said:
Sorry, I can't help you...
Click to expand...
Click to collapse
Thanks don't worry I was reading on the forum that I may have to reinstall the Board Software_general_Android software