Hello . Thank you just for clicking here trying to help me .
Last night i tried to flash the new COS 13.0 . I wiped the system , data, cache partition ( without internal storage ) and then i flashed the zip . i booted the rom, then i tried to get root & xposed but that didn't worked and i wanted to restore the backup with my old ROM ( CM 13 Nightly ) . Surprise !! I got a ton of errors : " Unable to locate \firmware , persist, modem_st1 " and another ones . ok, just re flash the cm nightly and manually install all apps . I do that, then i see a LOOOT of lag on all thing i do . Just a simple swipe ..lag , try to call someone ..lag . text a message ...lag .
I go to the TWRP , trying to make a backup . I got those errors , i will make screenshots .
I searched the problem on google, i run ADB and write the make_ext4fs /dev/block/mmcblk0p15 command but that doesn't change everything .
I didn't lose my IMEI , I CAN MAKE & RECIEVE CALLS
Thanks if you can help me .
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Help please
What zip did you flash?
How did upgarade? with incremental?
Contain only changes. DOES NOT CONTAIN FULL ROM
You should not wipe system.
The most secure method is to fastboot latest cos img.
And upgrade from OTA
I flashed a zip from the OnePlus forum, the Untouched Version of the COS13. I cannot post links, sorry.
And it was not a incremental, was the full ROM. I manually wiped the system partition. Is my fault right?
I think the only solution is to backup all my data & completely return to stock via OnePlus Toolbox
Related
i am now using N8013
i flashed the HD 5.1 room and installed the Compatibility Pack for N8013
"http://forum.xda-developers.com/showthread.php?t=2119547&nocache=1"
Everything was great!!!!!
Except the pen....
No matter how hard i used it to touch the screen...
But the toolbar did come out when i detached the pen~~~
What's wrong.....Anyone can help me?? please~~~~
i'm waiting...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fs3232z said:
i am now using N8013
i flashed the HD 5.1 room and installed the Compatibility Pack for N8013
"http://forum.xda-developers.com/showthread.php?t=2119547&nocache=1"
Everything was great!!!!!
Except the pen....
No matter how hard i used it to touch the screen...
But the toolbar did come out when i detached the pen~~~
What's wrong.....Anyone can help me?? please~~~~
i'm waiting...
View attachment 1841460
Click to expand...
Click to collapse
then i flashed other Roms, but none of them worded...
anyone can help??i even can't downgrade it now....i can't find a official system can be used....
i love the S-pen very much~~~~
i want it back.....
Via recovery format system cache data preload sdcard .
Boot to download mode and flash stock 8013 rom .Or your saved original firmware or even your nandroid backup .
jje
JJEgan said:
Via recovery format system cache data preload sdcard .
Boot to download mode and flash stock 8013 rom .Or your saved original firmware or even your nandroid backup .
jje
Click to expand...
Click to collapse
i'm using twrp 2.4.4.0 recovery now, how to preload sdcard and boot to download?
i dont know how to do it because i can only find bootloader
is it what you'r talking about?
anyway, i tried, it just stuck in the beginning screen
help~~~~~
fs3232z said:
i'm using twrp 2.4.4.0 recovery now, how to preload sdcard and boot to download?
WHY ???? Stock rom is flashed via Odin .
BASICS .
http://forum.xda-developers.com/showthread.php?t=2080366
You would be better off reading and understanding the basics before messing with stuff you don't understand .
But your choice your brick .
jje
Click to expand...
Click to collapse
Hi, now I caused a pretty good problem on my phone. I have Zopo ZP980 32GB version .
I installed from Google Play app Root Explorer .
2 Watch this video and stop time to 00:49 . https://www.youtube.com/watch?v=RI08wNsanLY Everything I ticked there .
3 After a few seconds I started coming same error messages that can not run the application etc google.com, provider.......
4 Mobile I rebooted , but it dont start. It show me only logo Zopo and that is everything.
5 I can go to Recovery menu through Android Commander .
6 I have access to the internal storage only if I turn on the phone in recovery mode and then selecting the following line
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and then the MMC .
Otherwise not get to it or through Android Commander . Then I can via Android Commander write data , otherwise it shows me as an empty space . Than I cant write anything data to my phone.
7 Then I copy to phone Rom.zip, I also tried twrm .
8 I leave this recovery menu and then get into recovery via Android Commander , where I can find update.zip, than i try install it, but still it write me: installation aborted , something like it was impossible to write anything on the internal space or card.
9 I tried it throught ADB . All the commands I have written well , it loadet my upda.zip (ROM) file in my pc to 100 % and then when it should start installing on your phone again wrote only installation aborted .
10 Mobile have root and USB Debugging is turned on. And yes i did factory reset, wipe data and cache.
THANKS
Now I was trying update some img files, but it write me in Adnroid Commander, that i dont have root access.
I deleted everything from my sd card, but nothing change.
Hello,
I flashed the latest MIUI fastboot dev rom (V6 Lollipop 5.0.2) (aries_images_5.4.24_5.0_cn_05157b373b) on my Xiaomi Mi2s on Friday. However, as I found out later, this ROM is somewhat special, because it merges internal storage and partition for the installed apps together. I didn't know it then and wanted to return back to the previous rom, so with the use of MiFlash, I tried to flash one of the earlier V6 L5 fastboot roms, but this error occured:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Meantime, my Mi2s fell to the floor from approximately 40 cm, but nothing happened, no obvious hardware damage or functional issues so far.
The issues that started after flashing the fastboot rom are following:
- it is not possible to flash any of the previous MIUI fastboot roms via MiFlash and with the use of "flash all" script, except for the latest rom (aries_images_5.4.24_5.0_cn_05157b373b), othwerwise the same error 0x80004005 occurs
- I can flash any of the previous fastboot roms with the use of "flash except storage" or "flash except data storage", but if I do so, there is no free space in the internal storage as demonstrated below (the partition remains merged), thus I cannot update the system with multilanguage MIUI
- the only rom I am able to use and successfully flash is that latest fastboot one (aries_images_5.4.24_5.0_cn_05157b373b), that allows me to copy the multilanguage MIUI rom to my internal storage and flash it via updater up
- however, I cannot flash this particular rom from the MiRecovery as an update.zip file ("Failed" error)
- "Wipe SD Card" in MiRecovery is not functioning as well ("Failed" error)
- the info about the capacity of internal storage indexed in my MIUI system are off too (image below)
It is clear something went wrong. There is something with the storage partition and I don't know how to solve it. Is there any way or anything I could try to return the system to its previous functioning state, please?
Thank you in advance for your answer and guidance.
hello all
after rooting my galaxy s8+ (G955FD) i found weird thing in my ( settings ) section
all castigator's items are out and the menu got extended too much ,,, is that normal ??? i don't think so
please find attach screenshot for more details
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yup it looks weird lol
fortesquieu said:
Yup it looks weird lol
Click to expand...
Click to collapse
how can i fix it ?
Probably bad flash/ota. Happened too me as well. I had to reset to stock and reflash via Odin. Make full backup of your device, then try to get back to stock.
amon87 said:
Probably bad flash/ota. Happened too me as well. I had to reset to stock and reflash via Odin. Make full backup of your device, then try to get back to stock.
Click to expand...
Click to collapse
can you please describe little bit more ...
you mean i could wipe data with twrp recovery mode ?
or should use odin to install the same firmware again or what ?
What? No. Didn't say anywhere to root. Get to bootloader, use odin and flash original samsung system.
How to make full backup of the device if u arent rooted??
Don't root and fiddle around if you don't know what your doing. Or at least get enough information about what your doing before doing it.
this happened to me after flashing stock FW with odin and then flashing custom recovery without first letting the phone to boot.
After flashing CSC, the phone needs to go to revocery and finish the flashing process (copy CSC files to system). If you flash custom rom, it might not be able to flash the zip and therefore you have no CSC and get weird settings.
I was able to flash the zip with custom recovery by remounting system as read-write first.
Hello, everyone
I need your help
I was trying to rebrand my BLL-L22 (which was working fine) to BLN-AL20C00
(To upgrade to Oreo)
so since Bootloader unlocking isn't working anymore , I followed this Thread :
[GUIDE]Unbrick honor6X. (No boot. No fastboot. No Recovery. No bootloader code)
the process was easy and clear
but something is messing I guess
I reach the point where my phone phone start working as factory mode
I restart to fastboot and flash the OEM by this code :
Code:
fastboot flash oeminfo BLN-AL20C00
and it's done successfully
then I restart the phone
then I put the UPDATE.APP (of this version: BLN-AL20C00B172) in dload folder
and do the normal dload method , but it doesn't work (says: please insert otg/sd card or check app files in 2 mins)
I think this is because the firmware is differnt from the factory mode system
...
I tried many things like installing TWRP , trying to flash the Update.app contents by fastboot :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and still nothing works
..................
I even installed my original oeminfo (BLL-L22C636)
and trying to flash all my firware versions : B150 , B360 , B391 , B396
and alllllll didn't work
...................
so I need to undersatnd why my phone doesn't accept any normal dload files and what can I do ???
I'm even begining to suspect that HL2BLNTMBD001051 isn't compatible with my phone !
but if you are sure that it is the right one , tell me what can I do after reaching the factory mode stage
because my phone doesn't accept dloading anything
look at the photo attached
this is when I try to install the Update.app contents by fastboot
(after I restart from this stage , the phone do bootloop , so I start over and try something else)