Hello,
My problem is that my UMI Super lcd is glitching due to LCD Replacement and I'm trying to flash an updated version that allegedly fix the problem.
I have the ROM and I have the SP Flash Tool but I can not make the SP Flash Tool to start flashing the ROM to the phone I already try a bunch of drivers for the phone (MTK6755) and I get a warning messagem pluging the phone and then it seems conected but the flashing never start I already try Disable Driver Signature Enforcement but I get the same problem over and over again. SP FLash Tool don't even give me an error.
(Printscreen of my Device Managment when phone is booting) https://s24.postimg.org/eid6fk5o5/Sem_T_tulo.jpg
Hope you can help me best regards,
skinvic23
Hi there and welcome to assist,
Here is all you need for your device:
Umi Super Guide [Firmwares, ROMs, Kernel, Root, Recovery] New OTA v3.02_20161121
You'll have to create an account to post in the main forums if you have any other questions.
Good luck
Related
Hi All ,
I have a xolo q1010i which was running on few custom roms previously before I managed to get the flash stock rom from (brieftutorials.com/how-to-unbrick-xolo-q1010i-by-installing-stock-rom/[/url])
Now I used the SP flash tool to unbrick it and install the stock rom, it worked fine until i found that the IMEI was lost.
Still i managed to insert imei using uncle tools and everything was fine.
this is where the problem starts:
I got an update OTA for KitKat and once I updated it the phone was stuck in a loop
So i connected sp flash tool and ran the 4.2.2 stock rom, but suddenly half way I got an error messasge and that was the end.
I have a black screen device on which nothing works, no logo , no charging light, no power + volume up, no power+volume up+down etc .
Not even lights,
Windows says an unidentified device detected and SP flash tool does'nt work.
Have no clue what to do , Is this the end ? or do I have to try the USB Jig / send it for Jtag repair ?
All comments & Ideas appreciated.
Thanks in advance
_____________
Hola,
I managed to resurrect my mobile, I tried Jtag to bypass the preloader by researching a lot ( thanks to my all posts china mobile website) then used SP tools to flash the stock rom ( thanks to Kalaishere XDA )
Finally its working on Jellybean.
I will soon update it and also fix the tiny issue with no imei number
Issue resolved, thread closed, thanks.
Its been more than a month that I have been researching to rectify my Phone's flash.
I download several tools like fastboot, adb etc (these two by the way disappears in a flip of second as I open them). My phone is hard bricked but By luck Its detectable under COM ports in device manager.
I have SP Flash Tool (Old and new version, both encounters the same problem during Flash process). when I flash it says "BROM ERROR: S_DL_PMT_ERR_NO_SPACE(5069)" which I think is a problem of eMMC. By research, I found either eMMC is corrupted or damaged or there is a partition overlap in there.
Also, formatting by means of SP Flash Tool, can't help it.
When I run a memory test in SP Flash Tool, it fails to complete eMMC Pattern Test.
Please, Help me out to bring my phone back to life!
Thank you.
Hi,
You've asked in the correct section: http://forum.xda-developers.com/showthread.php?p=64169513&postcount=35
so I'll close this thread.
I flashed my Okitel U7 pro with sp flash tool without rooting it and after the phone wont boot but any time i conect it to the computer it give me the recogniting sound and then it doesnt recognize it any more and it keeps give this sound continusly.
Help..........
UJYW said:
I flashed my Okitel U7 pro with sp flash tool without rooting it and after the phone wont boot but any time i conect it to the computer it give me the recogniting sound and then it doesnt recognize it any more and it keeps give this sound continusly.
Help..........
Click to expand...
Click to collapse
Greetings and welcome to assist. What did you flash with sp flash tool ? You may need to reinstall your stock rom again
Good Luck
Sawdoctor
Hello smart people !
Please someone can help me, please?
I have an Acer T06 that I am using just like a paperweight
I have installed the wrong twrp because the link was wrong: https://forum.xda-developers.com/android/help/help-how-to-root-acer-liquid-zest-3g-t3420325
After this, the touchscreen is no more working. Mouse and keyboard are no detected.
In some micro-points the touch works, but just in some moment.
Pressing and swiping repeatedly with the palm of my hand, I am even able to unlock the screen, sometimes.
Now I have the right twrp installed and I am working in adb via a modified twrp that supports adb.
- I did a test with SP flash tool --> Error: nand flash was not detected. Error: UFS was not detected.
- Factory kit test gives me this error: firmware detected failed, ctp firmware version (provide by ctp vendor): b1.
The following values are read from the tablet!!
ctp firmware version: a1
ctp driver: Himax852xes_himaxctp.
I have formatted all and reinstalled all with sp flash tool and SP MDT tool, but the touchscreen still does not work.
I have formatted all and re-installed via TWRP: the same.
I can not install apps into phone because I can not use the touchscreen.
In some micro-points the touch works, but only in some moments.
Pressing and swiping repeatedly with the palm of my hand, I am even able to unlock the screen, sometimes.
I have asked almost everywere, but nobody is able to solve this problem.
Please, there is someone able to help me, please?
Otherwise I have to resign to throw the almost new phone in the trash.
I thank you in advance to anyone will try to help me
Greetings!
MasterSheea said:
Hello smart people !
Please someone can help me, please?
I have an Acer T06 that I am using just like a paperweight
I have installed the wrong twrp because the link was wrong: https://forum.xda-developers.com/android/help/help-how-to-root-acer-liquid-zest-3g-t3420325
After this, the touchscreen is no more working. Mouse and keyboard are no detected.
In some micro-points the touch works, but just in some moment.
Pressing and swiping repeatedly with the palm of my hand, I am even able to unlock the screen, sometimes.
Now I have the right twrp installed and I am working in adb via a modified twrp that supports adb.
- I did a test with SP flash tool --> Error: nand flash was not detected. Error: UFS was not detected.
- Factory kit test gives me this error: firmware detected failed, ctp firmware version (provide by ctp vendor): b1.
The following values are read from the tablet!!
ctp firmware version: a1
ctp driver: Himax852xes_himaxctp.
I have formatted all and reinstalled all with sp flash tool and SP MDT tool, but the touchscreen still does not work.
I have formatted all and re-installed via TWRP: the same.
I can not install apps into phone because I can not use the touchscreen.
In some micro-points the touch works, but only in some moments.
Pressing and swiping repeatedly with the palm of my hand, I am even able to unlock the screen, sometimes.
I have asked almost everywere, but nobody is able to solve this problem.
Please, there is someone able to help me, please?
Otherwise I have to resign to throw the almost new phone in the trash.
I thank you in advance to anyone will try to help me
Greetings!
Click to expand...
Click to collapse
Greetings and welcome to assist. Unfortunately assist is for guiding new members around the boards only, you need to ask your question here
https://forum.xda-developers.com/android/help
All I can suggest is downloading the latest firmware for your device from the manufacturer and installing that with fastboot
Thanks for understanding
Sawdoctor
I already installed the mtk driver and the sp flash tool and i also have the stock rom of my phone but the problem is, my pc can't detect my dead phone. I already searched for solution here and youtube and followed the procedures but nothing happened. Same problem. Hope you can help me guys. Thanks!
pls my tecno phone i format it with sp flash and is not coming up again pls i need your help