I already installed the mtk driver and the sp flash tool and i also have the stock rom of my phone but the problem is, my pc can't detect my dead phone. I already searched for solution here and youtube and followed the procedures but nothing happened. Same problem. Hope you can help me guys. Thanks!
pls my tecno phone i format it with sp flash and is not coming up again pls i need your help
Related
Hi All ,
I have a xolo q1010i which was running on few custom roms previously before I managed to get the flash stock rom from (brieftutorials.com/how-to-unbrick-xolo-q1010i-by-installing-stock-rom/[/url])
Now I used the SP flash tool to unbrick it and install the stock rom, it worked fine until i found that the IMEI was lost.
Still i managed to insert imei using uncle tools and everything was fine.
this is where the problem starts:
I got an update OTA for KitKat and once I updated it the phone was stuck in a loop
So i connected sp flash tool and ran the 4.2.2 stock rom, but suddenly half way I got an error messasge and that was the end.
I have a black screen device on which nothing works, no logo , no charging light, no power + volume up, no power+volume up+down etc .
Not even lights,
Windows says an unidentified device detected and SP flash tool does'nt work.
Have no clue what to do , Is this the end ? or do I have to try the USB Jig / send it for Jtag repair ?
All comments & Ideas appreciated.
Thanks in advance
_____________
Hola,
I managed to resurrect my mobile, I tried Jtag to bypass the preloader by researching a lot ( thanks to my all posts china mobile website) then used SP tools to flash the stock rom ( thanks to Kalaishere XDA )
Finally its working on Jellybean.
I will soon update it and also fix the tiny issue with no imei number
Issue resolved, thread closed, thanks.
Hello, i need help. i format my alcatel pop c7 with sp format tools. now is dead.
i try install the stock rom and the pc not recognized the smartphone. i cant do anything.
someone help me? please , i already installed the drivers and nothing
solved. i try other sp flash tools
Great that you solved your problem.
i flashed my lenovo a319 with the firmware rom but since it wont badge at all. it wont even start.my pc can recognise the mtk port but when i m trying again to flash i have this brome error. i tried to use the one click unbrick without success.
can you please tell me if there is anything to do?
thank you
alexandros
Hi xda,
So I had a soft bricked Micromax Canvas a290 which boot looped and couldnt access recovery. I flashed it with a stock ROM. Now the phone is hard bricked, and I'm thinking probably because the rom I downloaded had issues. I looked up another stock rom from xdafirmware, and am trying to follow a tutorial on youtube on flashing a hard bricked device.
The issue I have here is this:
The tutorial says the phone is supposed to connect and disconnect every 7-8 seconds (evident by the sound windows makes when usb device is connected and disconnected).
The thing is, when I connect my device windows makes the connected sound, but the device doesnt disonnect. SP flash tool cant flash my phone. I have tried any and every button combination, but they dont seem to help.
I am an tech enthusiast myself, and I have flashed a lot of mtk soft bricked devices before, but I am totally stumped here.
Can anyone help?? Any ideas whats happening? Any help is greatly appreciated. Thank you.
Tiks_Baralous said:
Hi xda,
So I had a soft bricked Micromax Canvas a290 which boot looped and couldnt access recovery. I flashed it with a stock ROM. Now the phone is hard bricked, and I'm thinking probably because the rom I downloaded had issues. I looked up another stock rom from xdafirmware, and am trying to follow a tutorial on youtube on flashing a hard bricked device.
The issue I have here is this:
The tutorial says the phone is supposed to connect and disconnect every 7-8 seconds (evident by the sound windows makes when usb device is connected and disconnected).
The thing is, when I connect my device windows makes the connected sound, but the device doesnt disonnect. SP flash tool cant flash my phone. I have tried any and every button combination, but they dont seem to help.
I am an tech enthusiast myself, and I have flashed a lot of mtk soft bricked devices before, but I am totally stumped here.
Can anyone help?? Any ideas whats happening? Any help is greatly appreciated. Thank you.
Click to expand...
Click to collapse
Greetings and welcome to assist. I can find very little information for your device apart from this thread which may help, can you connect to the device just using fastboot ?
https://forum.xda-developers.com/android/general/tutorial-micromax-canvas-knight-a290-t2872896
Good Luck
Sawdoctor
Hello guys can any body help me please i have into a big trouble after flashing weko fever rom on my Qmobile Z10.
First i flashed weko fever rom using SP flasher Tool but after flashing when i switched on my mobile it is not recognize my both sims and also Imies fields got empty. So i decided to root it but after using many tools i was unable to root my cel. So i decided to revert back to it's original stock rom so i download and refleshed using SP flasher Tool but after flashed stock rom my cel was hard bricked and unable to switched on now but when i connect USB cable only red light on and also recognized from PC. I tried lot of method from XDA website but unable to recover my cell phone back to it's orignal stat. So i decided to post here plz any Developer help me plz to recover my cell phone back to it's running state.
Plz plz plz............
Thanks in advance.
m.haseebhaider said:
Hello guys can any body help me please i have into a big trouble after flashing weko fever rom on my Qmobile Z10.
First i flashed weko fever rom using SP flasher Tool but after flashing when i switched on my mobile it is not recognize my both sims and also Imies fields got empty. So i decided to root it but after using many tools i was unable to root my cel. So i decided to revert back to it's original stock rom so i download and refleshed using SP flasher Tool but after flashed stock rom my cel was hard bricked and unable to switched on now but when i connect USB cable only red light on and also recognized from PC. I tried lot of method from XDA website but unable to recover my cell phone back to it's orignal stat. So i decided to post here plz any Developer help me plz to recover my cell phone back to it's running state.
Plz plz plz............
Thanks in advance.
Click to expand...
Click to collapse
Your problem sloved or still stuck??