Database Info

SystemLess Root for Marshmallow Android 6.0 Stock Rom(unrooted and locked bootloader)

The official update of the MOTO G3 2015 is available over the OTA.
So , the next question is that the unlocking bootloader and rooting process still the same or if anyone else has any problem with the process.
Also , there has been a lot of buzz about the SystemLess Root but no proper thread for MOTO g3 is available.
So , if someone can guide me through the entire process of SystemLess Root
And if the SystemLess Root works properly with marshmallow update.
I am on MOTO G3 2015 Marshmallow Android 6.0 (Indian OTA update)
System Version : 24.11.25.osprey_retasia_ds_2gb.retasia.en.o3.retin

The very first thing you have to do is to unlock your bootloader if you want root.

It's not possible for Moto G3 I think..

adsbhatial said:
The official update of the MOTO G3 2015 is available over the OTA.
So , the next question is that the unlocking bootloader and rooting process still the same or if anyone else has any problem with the process.
Also , there has been a lot of buzz about the SystemLess Root but no proper thread for MOTO g3 is available.
So , if someone can guide me through the entire process of SystemLess Root
And if the SystemLess Root works properly with marshmallow update.
I am on MOTO G3 2015 Marshmallow Android 6.0 (Indian OTA update)
System Version : 24.11.25.osprey_retasia_ds_2gb.retasia.en.o3.retin
Click to expand...
Click to collapse
i also have same problm plz help....

Its working great
1. Unlock bootloader
2. Flash twrp
3. Flash supersu 2.62 .zip
Sent from my MotoG3 using Tapatalk

I am having the problem with link2sd app whenever I tried to integrate any app into system and reboot my device it completely remove that app from the device ......why its happening

Yousvel said:
The very first thing you have to do is to unlock your bootloader if you want root.
Click to expand...
Click to collapse
Ok.. I know about the whole process of rooting the MOTO G3 is .
I am asking if the SystemLess Root is working on MOTO G3 Marshmallow Update
I have seen some posts where MOTO G3 users have used the SystemLess Root on Lollipop.

sbsharma said:
Its working great
1. Unlock bootloader
2. Flash twrp
3. Flash supersu 2.62 .zip
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Thanks for the Reply.
You weren't clear about whats working great.
Rooted MOTO G3 Marshmallow or SystemLess Root as It is also SuperSu v2.62

I told what you asked in bold letters.... systemless root (supersu 2.62)working great on marshmallow

sbsharma said:
Its working great
1. Unlock bootloader
2. Flash twrp
3. Flash supersu 2.62 .zip
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Please verify WITH LINKS the following information:
Model:
Android Version:
TWRP Version:
SuperSU version:
Need to put together a proper rooting procedure so that users don't get stuck on bootscreens.

Dom3616 said:
Please verify WITH LINKS the following information:
Model:
Android Version:
TWRP Version:
SuperSU version:
Need to put together a proper rooting procedure so that users don't get stuck on bootscreens.
Click to expand...
Click to collapse
Xt1550 2gb
Android 6.0
2.8.7.0 r5
supersu 2.62 flashable zip
All links are on xda search them
Sent from my MotoG3 using Tapatalk

sbsharma said:
I told what you asked in bold letters.... systemless root (supersu 2.62)working great on marshmallow
Click to expand...
Click to collapse
Thanks For the Reply.
I asked two questions and you replied only to one or to Both.
It confused me.
But Thanks for the HELP.

My xender app does not work after this system update can u plss tell me y???? And wt is the soln

Dom3616 said:
Need to put together a proper rooting procedure so that users don't get stuck on bootscreens.
Click to expand...
Click to collapse
Agree. And the procedures need to fill all the gaps of info that currently exist. For example, after unlocking bootloader, it would have been helpful to know that you need to reboot and let the system rebuild itself (which takes several minutes) before moving on to anything else such booting/flashing TWRP & rooting.

adsbhatial said:
The official update of the MOTO G3 2015 is available over the OTA.
So , the next question is that the unlocking bootloader and rooting process still the same or if anyone else has any problem with the process.
Also , there has been a lot of buzz about the SystemLess Root but no proper thread for MOTO g3 is available.
So , if someone can guide me through the entire process of SystemLess Root
And if the SystemLess Root works properly with marshmallow update.
I am on MOTO G3 2015 Marshmallow Android 6.0 (Indian OTA update)
System Version : 24.11.25.osprey_retasia_ds_2gb.retasia.en.o3.retin
Click to expand...
Click to collapse
First of all, Systemless Root is Available for MOTO G 3RD GEN.. Just Grab the zip.. No other zip will work except BETA-SuperSU-v2.62-3-20151211162651.zip..

Rooting moto g3 marshmallow
Can Anyone Provide me twrp recovery and systemless supersu for moto g3 marshmallow?

Has anyone had success installing superSu 2.76 systemless? I ask for this because I'm trying to install unoficial systemless xposed and it will only install systemless if supersu 2.76 is also flashed systemless (not updated via supersu app)
I managed, besides 2.62 beta, to get systemless root with CF-autoroot (2.74)

Persechini said:
Has anyone had success installing superSu 2.76 systemless? I ask for this because I'm trying to install unoficial systemless xposed and it will only install systemless if supersu 2.76 is also flashed systemless (not updated via supersu app)
I managed, besides 2.62 beta, to get systemless root with CF-autoroot (2.74)
Click to expand...
Click to collapse
So you didnt have to flash 2.62 ??? You just used the CF-AUTOROOT app to root ??

gregferns said:
So you didnt have to flash 2.62 ??? You just used the CF-AUTOROOT app to root ??
Click to expand...
Click to collapse
never, Never, NEVER EVER use a one-click root on the Moto G 3rd gen, it can and will brick it... we have seen tons of examples of it happening on Marshmallow. The rooting process has been refined and simplified and works on all stock Marshmallow ROMs...
1) Unlock bootloader
2) Boot TWRP and do a full backup and store it in a safe place (Seriously, do this... When you need it you will thank me)
2a) Flash TWRP (optional, but recommended)
3) Start TWRP by either fastboot or on the phone if you flashed it
4) Go to Advanced - Terminal
5) Enter `echo SYSTEMLESS=true>>/data/.supersu` press Enter and exit back to home
6) Flash latest stable or beta SuperSU zip
7) Reboot and enjoy root!

acejavelin said:
never, Never, NEVER EVER use a one-click root on the Moto G 3rd gen, it can and will brick it... we have seen tons of examples of it happening on Marshmallow. The rooting process has been refined and simplified and works on all stock Marshmallow ROMs...
1) Unlock bootloader
2) Boot TWRP and do a full backup and store it in a safe place (Seriously, do this... When you need it you will thank me)
2a) Flash TWRP (optional, but recommended)
3) Start TWRP by either fastboot or on the phone if you flashed it
4) Go to Advanced - Terminal
5) Enter `echo SYSTEMLESS=true>>/data/.supersu` press Enter and exit back to home
6) Flash latest stable or beta SuperSU zip
7) Reboot and enjoy root!
Click to expand...
Click to collapse
I never do auto rooting... I always follow the guides for any phone.... I was just enquiring of him if he had done it that way ????
As to your 2nd point I had done a TWRP of my stock rom for the merlin,,, and then like a dumbass i had kept it on my sd card (64gb ) which suddenly decided to die on me.... so i lost that...
Anyway,, when i try to put back my MOTO GTE to stock, i will flash the firmware and then try the systemless root,,, have never done that before..
thanks for the stepby step guide..
cheers
Greg

SUPERSU link for OPO COS 13 ( 6.0.1) ? help

Hello Friends,
I have tried to root my OPO running on cos 13 through TWRP. Unfortunately the rooting failed and the phone failed to start, It hangs in "cyanogen mod ready " boot animation screen. some how I have managed to flash the phone to stock OS and again updated it to COS 13.
Now I would like to root the phone , Please someone provide me the right SUPERSU link !
so that I can use it through TWRP.
P.S: The bootloader is already Unlocked.
Thanks in advance :good:

I'm dealing with the same problem, and I've had to flash the system partition back to 5.1.1 and then upgrade to 6.0.1 3 times. Each time I try installing different versions of SuperSU It hangs. Apparently you aren't supposed to install it, and enable root from the developer options, but I don't have any such option.

srink.007 said:
Hello Friends,
I have tried to root my OPO running on cos 13 through TWRP. Unfortunately the rooting failed and the phone failed to start, It hangs in "cyanogen mod ready " boot animation screen. some how I have managed to flash the phone to stock OS and again updated it to COS 13.
Now I would like to root the phone , Please someone provide me the right SUPERSU link !
so that I can use it through TWRP.
P.S: The bootloader is already Unlocked.
Thanks in advance :good:
Click to expand...
Click to collapse
squigley said:
I'm dealing with the same problem, and I've had to flash the system partition back to 5.1.1 and then upgrade to 6.0.1 3 times. Each time I try installing different versions of SuperSU It hangs. Apparently you aren't supposed to install it, and enable root from the developer options, but I don't have any such option.
Click to expand...
Click to collapse
You need to flash the beta sytemless SU, downloads are at the bottom of this post. Latest is BETA-SuperSU-v2.67-20160121175247.zip - http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3

Ok, so I found a Beta version of SuperSU 2.7.1, and it seems to have worked. It was a different install process, saying it detected a "systemless root" or something, and it needed to patch the boot image. After that I appear to have root access again..
https://download.chainfire.eu/932/SuperSU/BETA-SuperSU-v2.71-20160331103524.zip
Edit: Whoops, guess I should have refreshed the page before posting.. What you said is correct Ken.

Thank you
kenboyles72 said:
You need to flash the beta sytemless SU, downloads are at the bottom of this post. Latest is BETA-SuperSU-v2.67-20160121175247.zip - http://forum.xda-developers.com/showpost.php?p=64161125&postcount=3
Click to expand...
Click to collapse
thanks a lot

DONE
http://imgur.com/hh3qkdxGuys Finally I have done it. Yes the phone is rooted now
1. Flash Stock COS 12
2.Update Stock COS 13 using stock recovery
3. Installed SUPERSU (chainfire) from Play Store
3. Install TWRP
4. Create NANDROID BACKUP (optional , I have created since I doubted the rooting process on cos 13)
5. Installed Latest STABLE SUPERSU ( V 2.65 as of now) {my last attempt with beta 2.71 failed }
6. Done
http://imgur.com/hh3qkdx

How to root 6.0.1

Everything is in the title how to root an updated to marshmallow 6045i.
Thanks

wiwild said:
Everything is in the title how to root an updated to marshmallow 6045i.
Thanks
Click to expand...
Click to collapse
Just flash this Supersu
https://download.chainfire.eu/751/SuperSU/
other versions not works

Alek Dev said:
Just flash this Supersu
https://download.chainfire.eu/751/SuperSU/
other versions not works
Click to expand...
Click to collapse
So just to clarify, I have a 6045I factory global unlocked from Amazon, It has never been rooted, bootloader unlocked, nothing. So would I place on SD and apply update through stock recovery, or is there a different method? Really just want root for adaway and xposed. TWRP would be nice, but not necessary. Just don't want a new paperweight. Thanks!

Can i install twrp to flash thid or stock is fine?

You can try windroid toolkit v3.1.
First u have to unlock bootloader then to flash recovery and supersu .
For me it is not recognising my phone hope u will get success.
If try then pls share ur experience.

yash_rathore25 said:
You can try windroid toolkit v3.1.
First u have to unlock bootloader then to flash recovery and supersu .
For me it is not recognising my phone hope u will get success.
If try then pls share ur experience.
Click to expand...
Click to collapse
I downloaded twice, and twice got security that windroid 3.1 has trojan, and was quarantined!?!

dongarritas said:
I downloaded twice, and twice got security that windroid 3.1 has trojan, and was quarantined!?!
Click to expand...
Click to collapse
For me it got downloaded but showing device either offline or unauthorized

I'd run a full virus /malware scan.... I use 360 Security on mobile devices and PC's. It, along with SUPERAntiSpyware has served me well.
Sent from my LG-H631 using Tapatalk

Just install the TWRP 3.0 in android development (it has instructions in the thread) and then you can flash the supersu mentioned.

famewolf said:
Just install the TWRP 3.0 in android development (it has instructions in the thread) and then you can flash the supersu mentioned.
Click to expand...
Click to collapse
Bro,
They also on locked bootloader with no fastboot commands working like me.

yash_rathore25 said:
Bro,
They also on locked bootloader with no fastboot commands working like me.
Click to expand...
Click to collapse
Well the obvious choices are:
1) Use mobile Q to restore to 5.0.2...unlock bootloader, install twrp....upgrade to marshmallow using the modified update.zip that doesn't wipe recovery and finally root using the file mentioned.
or
2) Live with it as it is until someone figures out how to restore fastboot which will probably still require downgrading.

famewolf said:
Well the obvious choices are:
1) Use mobile Q to restore to 5.0.2...unlock bootloader, install twrp....upgrade to marshmallow using the modified update.zip that doesn't wipe recovery and finally root using the file mentioned.
or
2) Live with it as it is until someone figures out how to restore fastboot which will probably still require downgrading.
Click to expand...
Click to collapse
I am waiting some days otherwise i will downgrade
BTW my device is recognized in fastboot but commands not working. It means fastboot is working but commands have been changed

dongarritas said:
So just to clarify, I have a 6045I factory global unlocked from Amazon, It has never been rooted, bootloader unlocked, nothing. So would I place on SD and apply update through stock recovery, or is there a different method? Really just want root for adaway and xposed. TWRP would be nice, but not necessary. Just don't want a new paperweight. Thanks!
Click to expand...
Click to collapse
The root install it with TWRP !

Alek Dev said:
The root install it with TWRP !
Click to expand...
Click to collapse
That's the problem. This phone is totally stock with nothing done but the update. I literally charged it, turned it on and 20 minutes later 6.0.1 was nagging for install, which I did. There is now the OEM unlock switch in developing options, but I don't know where to start, or flash.
Sent from my LG-H631 using Tapatalk

dongarritas said:
That's the problem. This phone is totally stock with nothing done but the update. I literally charged it, turned it on and 20 minutes later 6.0.1 was nagging for install, which I did. There is now the OEM unlock switch in developing options, but I don't know where to start, or flash.
Sent from my LG-H631 using Tapatalk
Click to expand...
Click to collapse
You must go back to 5.0 to install and then update it because in 6.0.1 update Removes Fastboot commands so you can't install it twrp....

I have a problem with rooting 6039Y on rom 6.0.1 by persona78. Stock rom 5.0.2 and root working fine. When i flash via TWRP after the update to MM i get this message:
-Cheking patch status
---Already patched, attempting to find stock backup
---Stock restore failed, attempting ramdisk restore
---Ramdisk restore failed, aborting
This solution - echo SYSTEMLESS=true >> /data/.supersu - not working.
Phone was simlock removed via furiousgold, maybe this is a problem?

Alcatel one touch idol 3 (5.5) 6045Y
i have this model Alcatel one touch idol 3 (5.5) 6045Y
full unlocked with unlocked bootloader and sim free (single sim model) with 6.0.1 from alcatel not updated to 6.0.1 already i got with 6.0.1 from alcatel (i know you will say "but that phone has 5.0 and updated to 6.0.1 trough a phone update online" But it is not updated ,phone came directly from factory and how i can root this device if there is any help.

Still no solution to rooting stock MM 6045I?

Hope this helps someone
I know this thread is dead, but replying so people can find the information easier.
I used this guide to flash twrp then used twrp to root on stock 6045O 6.0.1.

[ROOT] [GUIDE] Root Moto G4 (Plus) with SuperSU on Android 7.0 (NPJ25.93-14)

Here are the steps to root the Moto G4 (Plus) on Android 7.0 with SuperSU.
1. Unlock your bootloader with the Code you can receive from Motorola. Further instructions: unlocking bootloader. You have to create a Motorola account first.
2. Flash TWRP 3.0.2.0 through bootloader. Download and how-to-flash: twrp athene
3. Backup partitons in TWRP (especially the boot-partition)
4. Flash Kernel ElementalX through TWRP. Download and further information: ElementalX
5. Wipe Cache and ART-Cache through TWRP (don't know if necessary but doesn't harm)
6. Flash SuperSU v2.79 SR3 through TWRP. Download SR3-SuperSU-v2.79-SR3-20170114223742.zip: SuperSUv2.79SR3.
SuperSU v2.79 SR3 (or newer) will flash as systemless by default on Motorola devices running Android 6+. Older versions of SuperSU won't do that without creating a config file .supersu in /data containing the line
Code:
SYSTEMLESS=true
So the best is to make sure you don't use an older version of SuperSU than 2.79 SR3!
That's it and it works. SuperSU.apk is going to be installed in step 6.
Successfully tested with XT1642, XT1622 (eta82), XT1643 (Adarsh balu), XT1644 (WTF?), XT1641 (EkisDeMX).

It's the same old guide man. Please see before posting if similar threads exist. XDA is getting confusing for the common non-techie person anyways.

Works perfect on Moto g4 (XT1622) :good:

I've tried to install SuperSU before and it didn't work on my device XT1640. I've got a bootloop and had to flash stock ROM (now I'm using another supersu). Does it really work now? Cuz I don't want to get a bootloop again and lose all my data.

Dex5er said:
I've tried to install SuperSU before and it didn't work on my device XT1640. I've got a bootloop and had to flash stock ROM (now I'm using another supersu). Does it really work now? Cuz I don't want to get a bootloop again and lose all my data.
Click to expand...
Click to collapse
You have to use SuperSU v2.79 SR3. If you use any older version, it won't install systemless and causes bootloops.
Which version of SuperSU did you flash?
And you have to flash ElementalX kernel before installing SuperSU. Otherwise you will get bootloop too.

tywinlannister7 said:
It's the same old guide man. Please see before posting if similar threads exist. XDA is getting confusing for the common non-techie person anyways.
Click to expand...
Click to collapse
Didn't find any thread which describes the method rooting with SuperSU in the first post and as its topic.
In some threads (with other topics like how to root with phh's SuperUser) there is in the discussion mentioned this method with SuperSU but nobody will ever find these posts...

disguisedview said:
You have to use SuperSU v2.79 SR3. If you use any older version, it won't install systemless and causes bootloops.
Which version of SuperSU did you flash?
And you have to flash ElementalX kernel before installing SuperSU. Otherwise you will get bootloop too.
Click to expand...
Click to collapse
I've installed ElementalX Kernel first then I installed SuperSU and I've got a bootloop. I used SuperSU v2.62 and got a bootloop, then I tried with SuperSU v2.74 and also got a bootloop.

Dex5er said:
I've installed ElementalX Kernel first then I installed SuperSU and I've got a bootloop. I used SuperSU v2.62 and got a bootloop, then I tried with SuperSU v2.74 and also got a bootloop.
Click to expand...
Click to collapse
Ok, seems to be the reason. You have to use version 2.79 SR3 or newer if available.
Otherwise it won't work without further modification...

disguisedview said:
Ok, seems to be the reason. You have to use version 2.79 SR3 or newer if available.
Otherwise it won't work without further modification...
Click to expand...
Click to collapse
Alright, is there any problem if I unroot my device with this supersu and root again with the SuperSU that you said, will I get any problem? Do I have to reinstall ElementalX Kernel and twrp again?

Dex5er said:
Alright, is there any problem if I unroot my device with this supersu and root again with the SuperSU that you said, will I get any problem? Do I have to reinstall ElementalX Kernel and twrp again?
Click to expand...
Click to collapse
I don't know. If you have backup of your partitions then flash your original system and boot partition and start from beginning (ElementalX and then SuperSU 2.79 SR3).
If you don't have backups then download (here on xda or somewhere else) stock firmware and flash system und boot partition.

I am currently using the resurrection remix ROM on my moto g4 plus....and my turbo charging is not working...is there anything that I can do to fix this

Asish.pradhan said:
I am currently using the resurrection remix ROM on my moto g4 plus....and my turbo charging is not working...is there anything that I can do to fix this
Click to expand...
Click to collapse
Is it really not working? Or it just doesn't show the popup "TurboPower connected"?

does it work on XT1643 Indian variant ?
---------- Post added at 04:44 PM ---------- Previous post was at 04:40 PM ----------
Asish.pradhan said:
I am currently using the resurrection remix ROM on my moto g4 plus....and my turbo charging is not working...is there anything that I can do to fix this
Click to expand...
Click to collapse
Turbo Power worked fine in my device when using the Ressuruction Rom. Probably restarting the device would solve the issue.

I checked the power input using ampere..its working fine..thnks every1

disguisedview said:
Here are the steps to root the Moto G4 (Plus) on Android 7.0 with SuperSU.
1. Unlock your bootloader with the Code you can receive from Motorola. Further instructions: unlocking bootloader. You have to create a Motorola account first.
2. Flash TWRP 3.0.2.0 through bootloader. Download and how-to-flash: twrp athene
3. Backup partitons in TWRP (especially the boot-partition)
4. Flash Kernel ElementalX through TWRP. Download and further information: ElementalX
5. Wipe Cache and ART-Cache through TWRP (don't know if necessary but doesn't harm)
6. Flash SuperSU v2.79 SR3 through TWRP. Download SR3-SuperSU-v2.79-SR3-20170114223742.zip: SuperSUv2.79SR3.
SuperSU v2.79 SR3 (or newer) will flash as systemless by default on Motorola devices running Android 6+. Older versions of SuperSU won't do that without creating a config file .supersu in /data containing the line
Code:
SYSTEMLESS=true
So the best is to make sure you don't use an older version of SuperSU than 2.79 SR3!
That's it and it works. SuperSU.apk is going to be installed in step 6.
Successfully tested with XT1642, XT1622 (eta82).
Click to expand...
Click to collapse
Does it work with XT1643 Indian variant ? Please do let me know .

arpith.pr said:
Here are the steps to root the Moto G4 (Plus) on Android 7.0 with SuperSU.
1. Unlock your bootloader with the Code you can receive from Motorola. Further instructions: unlocking bootloader. You have to create a Motorola account first.
2. Flash TWRP 3.0.2.0 through bootloader. Download and how-to-flash: twrp athene
3. Backup partitons in TWRP (especially the boot-partition)
4. Flash Kernel ElementalX through TWRP. Download and further information: ElementalX
5. Wipe Cache and ART-Cache through TWRP (don't know if necessary but doesn't harm)
6. Flash SuperSU v2.79 SR3 through TWRP. Download SR3-SuperSU-v2.79-SR3-20170114223742.zip: SuperSUv2.79SR3.
SuperSU v2.79 SR3 (or newer) will flash as systemless by default on Motorola devices running Android 6+. Older versions of SuperSU won't do that without creating a config file .supersu in /data containing the line
Does it work with XT1643 Indian variant ? Please do let me know .
Click to expand...
Click to collapse
Nobody confirmed it yet in this thread.
I could it only test with 1642.
But normally i would say it should also work on 1643 variant.

arpith.pr said:
Does it work with XT1643 Indian variant ? Please do let me know .
Click to expand...
Click to collapse
Yes it does work. It is the only way to root stock N on any of the models.

tywinlannister7 said:
Yes it does work. It is the only way to root stock N on any of the models.
Click to expand...
Click to collapse
Thanks

Working on XT1643....
Im making a video on how to do this to make it easier .... For others like me to understand

I can just Reboot to custom recovery, root and then still use my stock recovery?

Root S7/ S7 Edge & Unroot Easy (Updated: 02/09/2020)

This is an updated root and unroot method for the s7/s7 edge.
I updated the zip file with the latest eng boot
Uploaded the latest stock files
Credit: https://forum.xda-developers.com/verizon-s7-edge/how-to/root-s7-s7edge-oreo-nougat-t3819616
Use V10 Odin Files this will allow you to root the s7/s7 sdge on the latest firmware. (02/09/2020)
Directions:
This works for Oreo And Nougat Roms
As always there is a chance of bricking your phone
1. Download and extract S7_Oreo_Nougat_Adb_Advanced_Root.zip
2. Reboot your phone to download mode
3. Inside the S7_Oreo_Nougat_Adb_Advanced_Root folder you will find an Odin_Firmware folder. Use Odin and flash the Eng Boot Image for your
phone
4. Once phone is rebooted and connected to computer click on the cmd-here.exe and type root.bat in the command window and hit enter
5. Follow directions on the command window
6. You can only use system root on Oreo
7. Once root is done and root bat closes leave your phone alone for a few minutes it may reboot a couple of times
8. Sprint Users This should work for you as well just let me know if your phone reboots with eng boot.img installed like it did on nougat while try too run the root.bat. I may need to change some things
9. With this system root do not update su binary if in anyway you get something asking you to update binaries ignore it. You can also disable notifications about updating binaries. This will not affect su app
10. Don't flash any superuser zips in recovery that are not made by me
S7 Oreo Nougat Adb Advanced Root V13: https://archive.org/download/s7oreo...Nougat_Adb_Advanced_Root_V13 (02-08-2020).zip
Return to stock:
Open odin
Reboot in download mode
Apply files
Plus in device
Flash to device
VZW-G935VVRUACSH1: https://archive.org/download/vzwg935vvruacsh120191014133427/VZW-G935VVRUACSH1-20191014133427.zip

Thank you. Followed the straight forward steps and got mine done perfectly on v10_BL. I even flashed stock and did it again just to be sure. I very much appreciate your work.

1) will this work on G935TUVSACSI1
2) how to install magisk plz reply

abdullahpk33 said:
1) will this work on G935TUVSACSI1
2) how to install magisk plz reply
Click to expand...
Click to collapse
Works on latest firmware
No bootloader unlock so no magisk

How do I return to stock with the changes that I have while rooted on S7 flat model? Sorry for nooby question

thank you so after trying for 1yr i got root on 935t ...
Can we install custom recovery/twrp???
And plz anyone know how to install xposed framework

i tried on G935P sprint , everything went like u said, but after cm closed and phone rebooted, and i went to open supersu (ur app) said root undetected !!!
i choosed supersu app (not system root ) ! any help
edit: i run root bat again, but this time choosed (system root orio while i am on nougat lol) and i choosed only root no tweak (before chosed on demand) + didnt choose finger fix..
but i feel the device little slow, any help ?

Somehow I am on version 11 of bootloader.....

Does it delete all my files? Oo
Also after flashing eng boot my phone is stuck at endless reboot
stuck at bootloader

abdullahpk33 said:
thank you so after trying for 1yr i got root on 935t ...
Can we install custom recovery/twrp???
And plz anyone know how to install xposed framework
Click to expand...
Click to collapse
To install Xposed, just download the Xposed installer 3.15 apk and install from the app. Reboot.

Will this work on SM-G935U
(Baseband: G935UUEU4BQD2) ???

will this work for Samsung Galaxy s7 edge SM-G935T Qualcomm Android 8.0 sir ?

Do you know??
Is there an unbranded firmware download available somewhere for this phone???

It did'nt work on my S7 edge SM-G935T T-mobile Qualcomm
I already used different cables, usb port, restart my laptop..
Anyone can help ? Will appreciate a lot!
it says on the phone [boot]fused 11 > binary 10

Good work man..
Can you explain how to unroot because my phone is little bit lagging and I can't flash stock firmware because after flashing the stock firmware my phone will stuck on Samsung logo..
Sorry for my bad English.. ?

None of the odin files worked for G930PVPSBCTA1
I'm on version G930PVPSBCTA1 and none of the odin files would flash. Fails immediately when flashing. Am I doing something wrong?

dont work on 930p v11 booloader

Well that sucks. I highly doubt we'll see a root method then at this point. Thanks for replying.

eng boot v11
hello,
I'm trying to root g935u and see every tread stuck on v11 bootloader.
Seems it may help: h_t_tps:// support.halabtech.com/index.php?a=downloads&b=file&id=234247
I have no access or knowledge to use that alone.

I get the same error message as you on a Verizon version
I get the same error message as you on a Verizon version
sinizter0202 said:
It did'nt work on my S7 edge SM-G935T T-mobile Qualcomm
I already used different cables, usb port, restart my laptop..
Anyone can help ? Will appreciate a lot!
it says on the phone [boot]fused 11 > binary 10
Click to expand...
Click to collapse