Database Info

[Q] alcatel one touch 906 ROM

Hi to all. I just recently rooted my alcatel one touch 906. Is there a compatible ROM for my device. Here is my device info, for reference.:
Model: alcatel one touch 906
Processor: Qualcomm msm7227
RAM: 512
Android 2.2.1
Build: fsr.1.3.6.0_t10.16
Thanks in advance. I hope you can help me..

thread updating..anyone?? thanks..

My Alcatel T906 (Martini ?) dead after reset factory
I search on net and found firmware for this
http://www.mediafire.com/?1phq58wf0z0t19n
(Recommend using on Windows XP)
# INSTALL DRIVER
1. Remove battery and connect phone with PC
2. Insert battery
3. PC will detect and request for driver (follow guide in BRCM_PC_USB_Driver folder)
4. Change COM port to 4 (at this step I don't know why this device disappears quickly, so you must open device manager windows and change as quick as this device appear, but maybe this strange issue lead to bug that I will refer at the end of this)
# FLASH
1. Remove battery and connect phone with PC
2. Run download_froyo_1_3_6.bat
3. Insert battery
At the end, I saw error message as below screen, but finally it shows "Program Android New Image suceed"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But I remove battery and insert again and power on and wait for more than 10 min. but phone only show "Join our Android"
Can anyone help?

I tried the procedures above. It is working. Actually this one is to unbrick/ firmware flash your alcatel ot-906. Although I didnt get the error message mentioned above because i think the issue was the usb driver was not installed correctly. Here is what i did:
1.download the file ot-906.rar. save and extract the file.
2.install the broadcom usb located in your extracted file named BRCM_PC_USB_Driver.
3.make sure your phone battery is charged atleast 50%, or it wont flash.
4.connect your cable to pc, not yet to phone. remove your battery, then insert it back then plug the usb. your phone should be datected by your pc as usb to serial device.
5.now open the batch file named download_froyo_1_3_6.bat.it will begin the flashing process. wait untill it says finished or success.
6.unplug the phone.remove the battery, insert again. power the phone on. now just wait 5-10 mins before you phone completely boots up.it takes sometime to boot because your phone still configures the software.
Now your phone should work fine.

not able to flash alcatel ot 906 with this method
betamax08 said:
I tried the procedures above. It is working. Actually this one is to unbrick/ firmware flash your alcatel ot-906. Although I didnt get the error message mentioned above because i think the issue was the usb driver was not installed correctly. Here is what i did:
1.download the file ot-906.rar. save and extract the file.
2.install the broadcom usb located in your extracted file named BRCM_PC_USB_Driver.
3.make sure your phone battery is charged atleast 50%, or it wont flash.
4.connect your cable to pc, not yet to phone. remove your battery, then insert it back then plug the usb. your phone should be datected by your pc as usb to serial device.
5.now open the batch file named download_froyo_1_3_6.bat.it will begin the flashing process. wait untill it says finished or success.
6.unplug the phone.remove the battery, insert again. power the phone on. now just wait 5-10 mins before you phone completely boots up.it takes sometime to boot because your phone still configures the software.
Now your phone should work fine.
Click to expand...
Click to collapse
H!!!!! i not able to flash my alcatel ot906 with this method when i try to flash com port error show i already instaled usb driver when i checked in device manger h/s not show in ports it show in disc drive so plz help me how can i solve this porblem,.......my alcatel mobile stay on only logo .........

You have to change the com port (set to com port 4). sorry i forgot to mention that step in my post. after you insert usb cable to pc, make sure you can immediately access the device manager because the comport will hide itself after 2-4 secs. to do this, you shoul open the device manager before conncting the usb cable to your pc.

Dead
My 906 dead after flash with this tutorial.
Step by step but dont turn on anymore.
If repeat the tutorial, stuck in getting image....

sharvan188 said:
H!!!!! i not able to flash my alcatel ot906 with this method when i try to flash com port error show i already instaled usb driver when i checked in device manger h/s not show in ports it show in disc drive so plz help me how can i solve this porblem,.......my alcatel mobile stay on only logo .........
Click to expand...
Click to collapse
I have the same problem, i can't succesfully install the USB driver in my windows XP, i have a code 10 error so my computer doesn't detect the request from my device (alcatel ot906Y) ... Help me please!
Thanks in advance!
PS: my phone is frozen in the logo since i install a wrong CWM, because i choose HTC H2 as model of my device and flash it. now i don't know how to do a hard reset .

i try this tutorial and now phone is dead, i can't even flash it with one touch alcatel original software updater

[GUIDE] Rooting Orange Pasadena Branded ALCATEL OT-918 (v2.3.6)

The guide is for the Alcatel OT-918 (No D, N, MIX), single sim, Orange Pasadena, from Romania with Gingerbread 2.3.6, it might work on other versions to, but I can't guarantee that.
Care should be taken, while the Orange Pasadena is a cheap phone, modifying your software might turn your device in an unusable brick.
Unfortunately the Android version of this phone can't be rooted with superoneclick or other simpler methods.
First of all You need the following tools from the attached file:
USB Drivers
SP_Flash_Tool_v3.1224.00
AlcatelScatterRetriever01 - optional
Universal recovery for Alcatel OT918 (2.3.5 and 2.3.6)
Superuser-3.0.7-efghi-signed.zip
http://dl.dropbox.com/u/74256292/Pasadena/Orange_Pasadena_OT918_root.zip
1. Turn off the phone, and connect it to the computer (Windows XP/7) with an USB cable, and install the attached drivers
2. Create a scatter file with AlcatelScatterRetriever01,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(alternatively you can skip this step and use the scatter file from the OT-918_Orange_Pasadena_Branded folder)
3. Run Flash tool and open the scatter file
4. Check only the recovery file from the OT-918_Orange_Pasadena_Branded folder
Double check that all other checkboxes must be unchecked!
5. Click on download
6. Connect the turned off phone to the computer, the progress bar should change its color and after a short while a small window with a green circle and ok should appear.
If it's not working remove USB cable, the battery, and reconnect the battery and then the USB cable and try again.
7. Remove the battery and the SD-card
8. Copy Superuser-3.0.7-efghi-signed.zip to the SD-card
9. Replace the SD-card and the battery
10. Start the phone with the Volume UP and Power combo (release first the power button)
11. You should be in the OT-918N recovery, and should install the file Superuser-3.0.7-efghi-signed.zip from the SD-card
12. Restart and enjoy your root-ed phone.
For UNROOT make a full wipe from recovery.
Repair information:
If you got an Orange Pasadena which would not boot or is in a bootloop, at step 4 select all the files from OT-918_Orange_Pasadena_Branded folder and go on with the guide.
At step 8 copy to the SD-card deepROM 2.3.6. from http://4pda.ru/forum/index.php?showtopic=323769&st=2320#entry16968462 ,
the file from http://disk.yandex.com/public/?hash=%2BFgTiMPQgqQjcFeH30tIoZnLBEVANGQz3%2BeBBWub5m0%3D ,
which is the only functional custom rom as far as I know for this model of the phone.
If someone needs a functional (but incomplete) stock image feel free to p.m. me.
Still searching for a full stock image, which will be posted here.
Thanks to qwe-, Linerty, elpopa, jman0, deep4512, breakk, @zoyB, cappa72, and all other who contributed to this guide.

Drivers
Hello,
At step "1: Turn off the phone, and connect it to the computer (Windows XP/7) with an USB cable, and install the attached drivers"
Witch one of the drivers should I install? I've tried everything, but the phone it is not recognized by the XP OS, and therefore the ASR.exe cannot generate the scattering file.
Please help, with more detailed procedure regarding the drivers.
Thank you,
Stro

It works, thank you!

Is there anyway to install another, more stable, Rom.
Maybe an original OT-918 ROM?
Thanks.

guys, i'm trying to reinstall an ot-918 device, with luck, but now the sim doesn't work (I have an network issue). what can I do?
also I've tried to follow this tutorial to add the IMEI back ('cause now is null), but without any luck (I don't have any "write imei" button). can someone help me out please?

[Q] Boot issue with AMOI N820

Hi! This is my first post here on xda-developers.com .
Last year I bought a rooted AMOI N820 with a CMWR custom recovery (modified by the seller).
It worked very well until I've decided to upgrade it from Android 4.0.4 to 4.2.2.
I've made a backup with MTK Droid Root & Tools v2.4.8.
I've copied the official ROM ( http://www.needrom.com/mobile/n820-official-4-2-update/ ) into the SD card and I've installed it using the CMW custom recovery.
It worked. Android 4.2.2 was installed (only CN and EN languages, but I don't mind) but it lacked gapps and lost the root permissions and the CMW custom recovery.
I found out a way to root it (probably - I've tried lots of programs - with framaroot ) and tried to install the Google Play Store with a downloaded apk file in different ways, but I encountered "Unfortunately Google services framework has stopped" error.
I couldn't install gapps from a zip file through a CMW recovery because the recovery was accidentally deleted when I've updated the software, so I tried this method ( http://www.youtube.com/watch?v=xU8ioasayAg ): on Root Explorer I've copied the folders cointained into the system folder of the zip file ( http://goo.im/gapps/gapps-jb-20130812-signed.zip linked in this post http://forum.xda-developers.com/showthread.php?t=2405292 ) into the folder system of my phone.
Here the problems began: now when I turn on the phone I can see the "startup" image and then it tries to reboot into the recovery mode, which is missing, so I face a lying android with a red alert signal on it.
If I connect the phone to the computer, Windows makes the "plugged in" sound and after a few second also the "plugged off" sound. If I connect it while on USBDeview I can see for a few seconds the "MT65xx Preloader". Also the MTK Droid Root & Tools shows it only for a glance, when the startup image of the phone shows up.
I'm really afraid of having to trash it because of having followed the wrong advice. Is there any way to fix my problem?
Could I use SP Flash Tool? Could anyone explain me the way step by step?
I'm looking for an answer! Help me, please!
Thanks.

Can't anyone really help me?

naimcoki said:
Hi! This is my first post here on xda-developers.com .
Last year I bought a rooted AMOI N820 with a CMWR custom recovery (modified by the seller).
It worked very well until I've decided to upgrade it from Android 4.0.4 to 4.2.2.
I've made a backup with MTK Droid Root & Tools v2.4.8.
I've copied the official ROM ( http://www.needrom.com/mobile/n820-official-4-2-update/ ) into the SD card and I've installed it using the CMW custom recovery.
It worked. Android 4.2.2 was installed (only CN and EN languages, but I don't mind) but it lacked gapps and lost the root permissions and the CMW custom recovery.
I found out a way to root it (probably - I've tried lots of programs - with framaroot ) and tried to install the Google Play Store with a downloaded apk file in different ways, but I encountered "Unfortunately Google services framework has stopped" error.
I couldn't install gapps from a zip file through a CMW recovery because the recovery was accidentally deleted when I've updated the software, so I tried this method ( http://www.youtube.com/watch?v=xU8ioasayAg ): on Root Explorer I've copied the folders cointained into the system folder of the zip file ( http://goo.im/gapps/gapps-jb-20130812-signed.zip linked in this post http://forum.xda-developers.com/showthread.php?t=2405292 ) into the folder system of my phone.
Here the problems began: now when I turn on the phone I can see the "startup" image and then it tries to reboot into the recovery mode, which is missing, so I face a lying android with a red alert signal on it.
If I connect the phone to the computer, Windows makes the "plugged in" sound and after a few second also the "plugged off" sound. If I connect it while on USBDeview I can see for a few seconds the "MT65xx Preloader". Also the MTK Droid Root & Tools shows it only for a glance, when the startup image of the phone shows up.
I'm really afraid of having to trash it because of having followed the wrong advice. Is there any way to fix my problem?
Could I use SP Flash Tool? Could anyone explain me the way step by step?
I'm looking for an answer! Help me, please!
Thanks.
Click to expand...
Click to collapse
install vcom drivers in pc and flash stock rom in sp tools, it will solve

I hope I'll work! I'll let you know! Thanks!
UPDATE
I've followed this guide ( http://forum.xda-developers.com/showthread.php?t=1982587 ).
I've extracted the zip file ( http://www.needrom.com/mobile/n820-official-4-2-update/ ) and this is its content
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've opened Flash_tool.exe) and clicked on the "Scatter-loading" button. In the extracted folder I've selected "scatter.txt", but I encoutered "Error: Initializing scatter file failed. Please check the name of the scatter file wich you load is legal."
In some forum I've found the advice to rename it "MT6577_Android_scatter_emmc.txt". I've tried this way but it noticed "Incorrect scatter file format". I've searched for this error and I've found that this could be due to chinese letters in the folder title, but there were not at all.
Is it a flashable ROM? (Are there flashable or unflashable ROMs?) It is possible to obtain a flashable version from it?
The content of the backup made with MTK Droid Root & Tools v2.4.8 is
and contains a file named "MT6577_Android_scatter_emmc.txt". If I load it I obtain an issue window containing " [...] Fail to load rom file: DSP_BL. [...] Fail to load rom file: PRELOADER. [...] " . If I ignore it the list I see this window
Then I stopped because I'm afraid of making other mistakes. Can anybody help me?

[Q] Help, I think I brick my THL T11

Hello everyone.
Sorry
Here is my situation:
THL T11 has 3 actual button, power, volume up and volume down.
I have THL T11 with MT6592 use it since early July.
Last month my thl earphone behaving weird by using it, the phone speaker is making sound too. Both are making sounds.
I try to use it on my laptop (win7 home premium x64 ram 4GB) but my earphone working fine, only in the phone it's behaving weird.
Last week when I dismount my sd card and mount it again, my music list is empty, but you can still play it via file manager.
After trying rescan media and many other softwares like that I'm hopeless so I thought maybe rooting it will fix it.
So I rooted the device with Rootgenius because when using Framaroot it is failed.
But still, it didnt fix it, I get root though.
Then I thought maybe flashing the phone is the only way.
So I go into recovery mode by holding volume up + power, and then choose factory reset and then choose yes, and then boom!!!
MY PHONE CANNOT BOOT, JUST DISPLAYING THL LOGO AT FIRST AND THEN BLACK SCREEN.
What the hell wrong, I want to factory reset yet it only brick my own phone -..-
So after searching in forum basicly I tried:
Instal adb driver
Pdanet 4150
MtkDroidTools v2.5.3
SP Flash tool v3 and v5
download the original THL T11 rom
usb driver
but to no avail.
It doesn't work at all.
Basicly if you want using spflashtool you must go in usb debugging mode, how can I even do that, my phone doesn't even boot.
Tried installing adb pda driver different version for mt6592 still when I connect the phone it does seem connected, cause it make voice of connected usb but still no sign in device manager on my laptop
I use mtk droid root & tools v2.5.3 , in (root backup recovery tab) I choose recovery from boot.img that i backed up before
status
Free space: system- failed:; C:\ 36319M
Connect to devie
error totalbytesperchunk not found. set default page/spare=2048/64
unknown rom structure backup not possible
attetion! recovery doesn't suit this phone
unkown rom structure, backup not possible
-boot kernel version=3.4.339
it is created C:\Users\blablabla\THL T11 boot patched 140911-075746.img
it is created C:\Users\blablabla\THL T11 recovery patched 140911-075746.img
error: recovery doesn't match by the size
task is complete
Still everything is not working, any solutions?
Don't tell me to instal adb driver, I already tried many drivers still no sign in Device Manager on my laptop
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

This is the answer
Afer that all you have to do is flash your phone

[Completed] Mstar S700 bricked+port COM conflict???

Hello everyone,
My S700 can't be powered on and it will not charge :crying: i think SP can detected my S700 yet but the device manager loop between "MediaTek USB port (COM14)" and "MediaTek Preloader USB VCOM (Android) (COM12)"... and me i'm crying !!! PLEASE HELP ME whta i will do ???
I understand that my last solution is to flash yet from the manufactor ROM... so to lost my work :'( but before i need to be sure that this troubles about my port COM 12 and 14 will make not more troubles ???
I hope you will understand better my troubles from this details :
*1/ I download the new S700 ROM from the manufactor website so i installed the drivers and flash it whith SP_MDT_exe_v3.1504-A2015.03.18-v06-customer => success! The 20150624_c218v13_jbl_a228_hd_3m_mstar ROM working well and during 2 weeks i install all my applications, contacts, ...
*2/ I try to transfer my sms from my old phone (Iocean X7hd) to my new S700 with Helium. It recognize my X7 and save my sms but it not working with the S700 (i opened a ticket to Helium) so i installed ALL MTK+ADB drivers found in this file www.adrive.com/public/fSxNQP/All MTK USB Driverv.9.2.PDanet.Adb 2015.zip => never working ! I remember about a conflict driver message...
*3/ I use MOBILedit ENTERPRISE_7_8_3_6076 to make a backup => it recognize my S700 and make a partial backup because my S700 is not rooted
*4/ I download the files from www.needrom.com/download/mstar-s700 about to root for version 20150624_c218v13_jbl_a228_hd_3m_mstar uploaded by fpiva4a : https://drive.google.com/file/d/0B358CZ0vWBWpcWZfV3A4bDFEaTg/view
*5/ I follow the tuto from forum.xda-developers.com/android/general/mstar-s700-review-5-5-hd-touch-id-t3132431/page3 so i open SPFT v5.1528, choose the download agent+scatter file from the fpiva4a's files :
- On the main screen choose firmware upgrade from the drop down menu
- Pull out the battery and connect your phone to your PC, let the SPFT and the phone initiate a 'handshake' => there is nothing (i don't remeber if at this step the device manager loop already...)
- Unplug your phone from the USB cable. Click on the download button on the main screen. Now put your battery back into the phone and plug in the phone to your pc using the usb cable=> the SP Flah Tool start and see a progress bar but i have this error :
" BROM ERROR : S_FTHND_FILE_IS_NOT_LOADED_YET (5007)
There is file not loaded yet!!
[HINT]:
1. Please check if the DA path is correct.
2. Please check if all the ROM files exist.
3. Please check if the scatter file description is sync with the exist ROM files"
*6/ I click on help+ok, close SP and unplugg my S700 => i can't be powered on !!!
*7/ I plug the USB cable and i heard sound to mount it and after loop to unmount => i thought about a conflict (step */2) so from the device manager i try to unistall the "MediaTek USB port" and "MediaTek Preloader USB VCOM (Android)" what loop. Also i uninstall from the Control Panel W7 all the drivers installed by step */2
*8/ I try several times the *5/ but always like */6 my S700 not power on
*9/ I use USBdeview and try to uninstall my port => the green line always loop between this 2 lines
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and i open the SP_MDT_exe_v3.1504-A2015.03.18-v06-customer from step *1/ => the scan is well and find my S700 on the port COM12
thanks for your help and sorry for this big post but i wanted to follow all the details even if i read all your link i don't find a specific reply about my trouble

Fail test
Several helpers said me to resolve my mistake when i want to try new recovery+root to reflash with the manufactor ROM. So i come back to the step 1, I download the new S700 ROM from the factory website and flash it with SP Flash tool => by SP__MDT_exe_v3.1504-A2015.03.18-v06 or SPFT v5.1528 it was same : success DL but my S700 doesn't restart.... :'(
Instead of firmware upgrade i test also Format All+Download but my S700 doesn't restart :'( So now i don't know what i can do ??? pleassse

pee_why said:
Several helpers said me to resolve my mistake when i want to try new recovery+root to reflash with the manufactor ROM. So i come back to the step 1, I download the new S700 ROM from the factory website and flash it with SP Flash tool => by SP__MDT_exe_v3.1504-A2015.03.18-v06 or SPFT v5.1528 it was same : success DL but my S700 doesn't restart.... :'(
Instead of firmware upgrade i test also Format All+Download but my S700 doesn't restart :'( So now i don't know what i can do ??? pleassse
Click to expand...
Click to collapse
Hi, thanks for using XDA Assist!
Please ask for further assistance here:
http://forum.xda-developers.com/general/help
You'll find expert advice there.
Good luck!
Thread closed.