Database Info

[Q] alcatel one touch 906 ROM

Hi to all. I just recently rooted my alcatel one touch 906. Is there a compatible ROM for my device. Here is my device info, for reference.:
Model: alcatel one touch 906
Processor: Qualcomm msm7227
RAM: 512
Android 2.2.1
Build: fsr.1.3.6.0_t10.16
Thanks in advance. I hope you can help me..

thread updating..anyone?? thanks..

My Alcatel T906 (Martini ?) dead after reset factory
I search on net and found firmware for this
http://www.mediafire.com/?1phq58wf0z0t19n
(Recommend using on Windows XP)
# INSTALL DRIVER
1. Remove battery and connect phone with PC
2. Insert battery
3. PC will detect and request for driver (follow guide in BRCM_PC_USB_Driver folder)
4. Change COM port to 4 (at this step I don't know why this device disappears quickly, so you must open device manager windows and change as quick as this device appear, but maybe this strange issue lead to bug that I will refer at the end of this)
# FLASH
1. Remove battery and connect phone with PC
2. Run download_froyo_1_3_6.bat
3. Insert battery
At the end, I saw error message as below screen, but finally it shows "Program Android New Image suceed"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
But I remove battery and insert again and power on and wait for more than 10 min. but phone only show "Join our Android"
Can anyone help?

I tried the procedures above. It is working. Actually this one is to unbrick/ firmware flash your alcatel ot-906. Although I didnt get the error message mentioned above because i think the issue was the usb driver was not installed correctly. Here is what i did:
1.download the file ot-906.rar. save and extract the file.
2.install the broadcom usb located in your extracted file named BRCM_PC_USB_Driver.
3.make sure your phone battery is charged atleast 50%, or it wont flash.
4.connect your cable to pc, not yet to phone. remove your battery, then insert it back then plug the usb. your phone should be datected by your pc as usb to serial device.
5.now open the batch file named download_froyo_1_3_6.bat.it will begin the flashing process. wait untill it says finished or success.
6.unplug the phone.remove the battery, insert again. power the phone on. now just wait 5-10 mins before you phone completely boots up.it takes sometime to boot because your phone still configures the software.
Now your phone should work fine.

not able to flash alcatel ot 906 with this method
betamax08 said:
I tried the procedures above. It is working. Actually this one is to unbrick/ firmware flash your alcatel ot-906. Although I didnt get the error message mentioned above because i think the issue was the usb driver was not installed correctly. Here is what i did:
1.download the file ot-906.rar. save and extract the file.
2.install the broadcom usb located in your extracted file named BRCM_PC_USB_Driver.
3.make sure your phone battery is charged atleast 50%, or it wont flash.
4.connect your cable to pc, not yet to phone. remove your battery, then insert it back then plug the usb. your phone should be datected by your pc as usb to serial device.
5.now open the batch file named download_froyo_1_3_6.bat.it will begin the flashing process. wait untill it says finished or success.
6.unplug the phone.remove the battery, insert again. power the phone on. now just wait 5-10 mins before you phone completely boots up.it takes sometime to boot because your phone still configures the software.
Now your phone should work fine.
Click to expand...
Click to collapse
H!!!!! i not able to flash my alcatel ot906 with this method when i try to flash com port error show i already instaled usb driver when i checked in device manger h/s not show in ports it show in disc drive so plz help me how can i solve this porblem,.......my alcatel mobile stay on only logo .........

You have to change the com port (set to com port 4). sorry i forgot to mention that step in my post. after you insert usb cable to pc, make sure you can immediately access the device manager because the comport will hide itself after 2-4 secs. to do this, you shoul open the device manager before conncting the usb cable to your pc.

Dead
My 906 dead after flash with this tutorial.
Step by step but dont turn on anymore.
If repeat the tutorial, stuck in getting image....

sharvan188 said:
H!!!!! i not able to flash my alcatel ot906 with this method when i try to flash com port error show i already instaled usb driver when i checked in device manger h/s not show in ports it show in disc drive so plz help me how can i solve this porblem,.......my alcatel mobile stay on only logo .........
Click to expand...
Click to collapse
I have the same problem, i can't succesfully install the USB driver in my windows XP, i have a code 10 error so my computer doesn't detect the request from my device (alcatel ot906Y) ... Help me please!
Thanks in advance!
PS: my phone is frozen in the logo since i install a wrong CWM, because i choose HTC H2 as model of my device and flash it. now i don't know how to do a hard reset .

i try this tutorial and now phone is dead, i can't even flash it with one touch alcatel original software updater

[hot]micromax a110 flashing tutorial working

i m not responcible for any damages
do at your own risk
read all twice before flashing
til date i have flashed more then 10 times by this method
Make sure that you read everything carefully and know what you are doing.
Don't blame me for any damage that may occur on your phone.
-----------------------------------------------------------------------------------------
-do not disconnect mobile while flashing bettery must be more then 50%
-pc/laptop must not stop while flashing
-close other progames running in your pc/laptop for better speed-discoonect net
-images given here for learning purpose for better understanding of all steps
-you can practice till step 3 before all steps
-there is tutorial inside downloaded file by micromax do not use it(stictly -they given image for firmware upgread and you have to click download button)
---------------------------------------------------------------------------
What's needed:
1)USB data cable
its there with your chrgere right!!!
2)MediaTek USB VCOM drivers
-go to settings-developer option - click on usb debuging mode ok
-now connect your mobile with your pc/laptop and driver containg drive created open it and install your desire 32 bit or 64 bit driver(run as admin)
---restart your pc with phone connected
---to check is your driver instal or not go to usb teether option and apply it. if internet surfing is possible then you are ready to go---(must check)
3)SP Flash Tool and flashing files
-- is provided with in download file
-- 2 rar files
----make new folder and extract both files in new folder
--so threre is two folder one for sp flash tool and one containing all flashing files (warning =do not rename this folder)
--------------------------------------------------------------------------------------------------------------------
1)open spflsh tool
First of all open SP Flash Tool, then click Scatter-loading button to load the correct scatter file
(here it is named MT6577_Android_scatter_emmc.txtfind in download file)
all files will be loded
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2)choose Option-USB Model,click USB Model,
Choose Option- DownLoad All-Speed-High speed click High Speed
3)now connect your fone with micro usb data cable (do not connect to pc now just only fone side connect)
Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
now fone is turn off with data cable coonect with fone side only
4) now do some speedy work
press download and connect immediatly to pc (same usb port when you use while instaling the driver)
The process will start and a red progress bar will appear.
After the red progress bar is complete(for 1 sec)
there will appear a purple progress bar(for1 sec
.
and thene yellow bar(for1 min to 5 min)
When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
5)You can now safely disconnect your phone and turn it on. The process ends here
remove your mobile and start it will take 2 min to first boot
enjoy!!!!!!!!
-----------------------------------------------
download links
---------------------------------
what's new in updated stock v2:
Auto rotation sensor bit improved
- internal memory now increased to 1.58 ,rest is internal card 1.12 gb
- now u can install apps in external memory card default.
battery improve.
true colour.
GPS fix.
better performance.
now install pass on memory card.
and lots more finding.
updated smooth scrolling.
--------------------------------
in downloaded file you will get sp flash tool and flashing files
make new folder and extract all 2 rar files in new folder
----------------------------------
stock rom version 2 links resume
stock rom version 2 mirror links resume
--------------------------------

reserved

i have flashed many times and found no need to remove battery just make sure all drivers are installed in pc even in mobile off mode also. then when u click upgrade firmware simply switch off ur mobile u feel the vibration after 5 sec of switch then simply connect it to usb cable thats all.

Error on Sp tool
I am getting this error I dont know what to do please help.
Please refer to the screen shot

deadmantfa said:
I am getting this error I dont know what to do please help.
Please refer to the screen shot
Click to expand...
Click to collapse
drivers not installed properly. install them again.

deadmantfa said:
I am getting this error I dont know what to do please help.
Please refer to the screen shot
Click to expand...
Click to collapse
Your vcom drivers not installed properly.....
Sent from my Micromax A110 using xda premium

mmx a110
Dibbyo123 said:
Your vcom drivers not installed properly.....
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
dead on sp tool error 4010 after red line no preloader driver plzz help me

Let's take everything over to this thread: http://forum.xda-developers.com/showthread.php?t=2167244

iBerry Auxus Linea L1 Root/Guide

How to Root iBerry Auxus Linea L1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I Have Found Many Users Searching For Root For Auxus Linea Li Root
Today I am going to provide you the process for rooting the phone. After rooting you can do a lot more in it. You can install custom ROMs, you can update the phone firmware, you can remove pre-installed application from the same, etc. Adding custom rom is the best thing you can do on it. So let’s move ahead with rooting. Remember that it is a one way proceed. That means once rooted you won’t restore things back. Also you will lose the phone warranty.​
Requirements:
Rooting means simply messing with phone permission. Sometime if you go with wrong stuff your phone will brick or wont boot. At that point resorting factory settings will only work. It is good if you can backup your phone first. And then only went ahead with the process.
Charge the device to maximum. Never attempt to root or make any changes if the battery is low. This can cause serious issue.
You have to update your system with latest usb drivers that will help your windows pc to communicate with the mobile phone. Install that.
Go in the settings and tap on developer options. There you can find usb debugging. Turn that thing on.
Download SP FLASH TOOL and keep it in a folder on your desktop.
Download the original iBerry Auxus Linea L1 USB Drivers and install them.
Download the Boot Recovery & Scatter files for iBerry Auxus Linea L1.
The last thing you will need is MTK Droid Root 2.5.3 root tool.
Rooting Process:
1.Extract the content of Sp Flash zip file in a folder. There will be a flash tool.
2.Extract the content of boot recovery and scatter in the same folder.
3.Run the sp flash took in the admin mode. In that you have to click on scatter loading. Choose the scatter file. This file will be available in the boot recovery folder.
4.The next thing you have to do is select the boot image file. You can do that by clicking on the left side of the Flash Tool.(just Click check box & click in blank space next to bootimg. and select Linea-L1_140626__boot_patched_140719-173447.img only)
5.Once done just check once again that the files are properly selected.
6.Now you have to extract the content of drivers that you had downloaded. Switch off your phone and connect it to your pc. Your pc will ask for the drivers. You have to provide the folder location.
7.When you are done with driver installation disconnect the phone and remove the phone battery.
8.Connect the phone just like that in switch off mode. After few seconds insert the battery back and then connect the phone to pc. Now in sp flash tool click on the download button.(FOR DRIVER HELP http://http://forum.xda-developers.com/showthread.php?t=2180436)
9.Flashing will start and you will get a completed process at the end.
10.After that you have to run the droid root software. For that first turn on your phone and from settings enable usb debugging. If you are unable to find the same then go in about and tap on build 5 times to turn on developer options.
Just connect the phone and then going Droid Root software. There you can find Backup recovery tab. Click on that and then click on super su. This will install super su user on the phone. You can then update the app from Google Play store.
U can ask a question if any of my wording is not understandable.
SP Flash Tool 3.1352.01 (5.1352.01).rar

Thanks
Nice :good: but is there any OS mod available? Looking forward for that

charancherry said:
Nice :good: but is there any OS mod available? Looking forward for that
Click to expand...
Click to collapse
May b in some days .

Hi Bro,
Nice to see this, But when i am doing... After clicking the download button nothing is happening. One full night i kept with connected. nothing is working fine...
Kindly help me....
Thanks & Regards

prasadskht said:
Hi Bro,
Nice to see this, But when i am doing... After clicking the download button nothing is happening. One full night i kept with connected. nothing is working fine...
Kindly help me....
Thanks & Regards
Click to expand...
Click to collapse
Switch off your phone and connect it to your pc. Your pc will ask for the drivers. You have to provide the folder location.Install Driver First And follow the procedure above mention .

manish dubey said:
Switch off your phone and connect it to your pc. Your pc will ask for the drivers. You have to provide the folder location.Install Driver First And follow the procedure above mention .
Click to expand...
Click to collapse
Thanks Bro,
Now i am able to do flash and followed the same steps. After i installed "Titanium back" when i tried to open it saying "Sorry, I could not acquire root privileges............................."
Kindly help me ...

Cutom rom for my Auxus linea L1
i am not getting any custom rom for this phone any side
are you working anything for this
i will be waiting for your reply

Yes I am waiting for any dev to make custom recovery for it ..

Stock ROMS for HUAWEI Ascend Y511-U30

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update: Use this link http://huaweidevices.ru/category/huawei-ascend-y511-u30 if you're facing any problem downloading the ZIP from the given link(s) below.
Ascend Y511-Huawei U30 V100R001C328 B120 Arabic
http://huaweidevices.ru/5huaweiromo...wei_Ascend_Y511-U30_V100R001C328B120_Arab.rar
Ascend Y511-Huawei U30 V100R001C328 B118 Iran
http://huaweidevices.ru/5huaweiromo...WEI_Ascend_Y511-U30_V100R001C328B118_Iran.rar
Ascend Y511-Huawei U30 V100R001C308 B108 Russia
http://huaweidevices.ru/5huaweiromo...i_Ascend_Y511-U30_V100R001C308B108_Russia.rar
SosukeAizen as​
Don't forget to press thanks button if I helped ya

How to check your build no.?
Go to System Settings -> About Phone and scroll down till you see your build number. Match the appropriate build number given up and download your desired ROM.

Reserved x2

Reserved x3

How to install via stock recovery
My phone is dead and stuck at boot logo, I have access to stock recovery and tried factory reset but its not working only option is to side load stock firmware, please provide solution.

Troubleshoot
imviren said:
My phone is dead and stuck at boot logo, I have access to stock recovery and tried factory reset but its not working only option is to side load stock firmware, please provide solution.
Click to expand...
Click to collapse
Installing the ROM from stock recovery will not help ya! Follow the instructions given below to troubleshoot your device.
You must have Windows XP SP3 or Windows 7 SP1 (32/64 bit) to perform.​(Windows 8, 8.1 & 10 any editions of them ain't gonna work)​
1.) Download, extract/install these:
Y511-U30 drivers
http://bit.ly/2d2UhbF
SP Flash Tool
http://bit.ly/2cY42Ju
Note: If you're using Windows XP SP3 and facing any problem in regarding of Flash Tool's execution. Download and Install all the latest hotfixes of .NetFramework. This will fix the problem and is the only solution of it unless use Windows 7 SP1!
Additional MTK Drivers (Optional)
http://bit.ly/2czNgOr
USB VCOM Drivers (Drivers for MTK Bootloader etc)
http://bit.ly/2czNgOr
2.) Execute SP Flash tool
Load the Scatter-File from the Stock ROM zip's in the SP Flash Tool
3.) Remove the battery of your phone and then re-insert it. Connect the phone with the USB Cable. Hold down the power button. Wait for the Windows to detect it. Windows will detect your phone and will install some drivers like USB VCom etc. After that SP Flash tool will detect your phone.
4.) Click the "DOWNLOAD BUTTON" in the SP Flash tool. If you've followed all the steps correctly it'll start flashing your phone. Wait for the flasher to completely flash your device after that it will show a "Green Check Box" window in result of a successful flash of your phone.
Don't forget to click the :good: button :laugh:​

Link not working. Please update the link

Dead Phone Huawei Ascend Y511-U30
Goodevening xda developer. Please help me fix my huawei ascend y511-u30. Because it is a year of not turning my phone. I've got so many research in any website. But the problem is my phone huawei y511-u30 is not working in any flashsable software. And aslo my problem is error about "Nand flash and Ufs error.
Please xda to fix my phone. My huawei ascend y511-u30 it is a dual IMEI aslo.
Here it is the First IMEI:864532028317425
Second IMEI:864532028513163.
Please more help to me. So i can revive my dead phone.
I hope more thanks to xda.

[Completed] Acer Liquid E3 (E380) Duo - Unusable as all applications keep crashing

Hi
I'm having a problem with my Acer Liquid E3 Duo (E380); after unlocking my 2 SIM cards and having successfully unlocked my phone I'm getting error messages saying that application xxx stopped working. The only thing I can do is acknowledged the message and then next error for the next application is appearing.
I've no clue if it can be repaired; I tried the recovery mode but without success.
I tried to flash the original ROM (downloaded from ACER) but I've issues.
I will try to explain what I've done.
OS used Windows 10
I downloaded the original KiKat zip (ROM) file from Acer
I downloaded / installed the VCOM drivers
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I downloaded SP Flash Tool v5.1628.00
I powered off the phone (cannot remove the battery)
Connected the phone with USB cable
Started SP Flash Tool
Selected the original scatter file which was provided by Acer (zip)
Click on Download
Got error 8417
Found another scatter file MT6589_Android_scatter_emmc; I copied it in the same directory that the original
Tried again to open the scatter and it worked (was loaded)
Is it normal that 'only' BOOTIMG is selected ???
Plugged the USB cable with a power-off phone
Click on download; nothing happened
Remove USB cable; re-inserted the USB cable download went to 100%
and finally got the error >> PMT Changed for the ROM; it must be downloaded <<<
I formatted the phone successfully; re-downloaded the ROM and got the same PMT error message
Surprisingly the phone is still working as it was prior all my attempts. So no real damage but as stated it is unusable due to all apps crashing.
Thanks in advance for your support

Me063 said:
Hi
I'm having a problem with my Acer Liquid E3 Duo (E380); after unlocking my 2 SIM cards and having successfully unlocked my phone I'm getting error messages saying that application xxx stopped working. The only thing I can do is acknowledged the message and then next error for the next application is appearing.
I've no clue if it can be repaired; I tried the recovery mode but without success.
I tried to flash the original ROM (downloaded from ACER) but I've issues.
I will try to explain what I've done.
OS used Windows 10
I downloaded the original KiKat zip (ROM) file from Acer
I downloaded / installed the VCOM drivers
I downloaded SP Flash Tool v5.1628.00
I powered off the phone (cannot remove the battery)
Connected the phone with USB cable
Started SP Flash Tool
Selected the original scatter file which was provided by Acer (zip)
Click on Download
Got error 8417
Found another scatter file MT6589_Android_scatter_emmc; I copied it in the same directory that the original
Tried again to open the scatter and it worked (was loaded)
Is it normal that 'only' BOOTIMG is selected ???
Plugged the USB cable with a power-off phone
Click on download; nothing happened
Remove USB cable; re-inserted the USB cable download went to 100%
and finally got the error >> PMT Changed for the ROM; it must be downloaded <<<
I formatted the phone successfully; re-downloaded the ROM and got the same PMT error message
Surprisingly the phone is still working as it was prior all my attempts. So no real damage but as stated it is unusable due to all apps crashing.
Thanks in advance for your support
Click to expand...
Click to collapse
Greetings and welcome to xda. I'm not familiar with your device but I have found this thread here
http://forum.xda-developers.com/showthread.php?t=2711667
That has firmware you can try and lots of useful information. Hopefully the experts there can help you better
Good Luck
Sawdoctor