hi all. plz help me about Zte q802cdma. while i upgrading lollipop update,i took an error at the setup and device not start. volume+ with power button : comes device logo to the screen.and dissappear in 3 seconds. volume- with power button: comes device logo to the screen but not load anything and logo appears forever.
volume+ and volume- with power button (if connected to pc) : device manager finds a device called name QHSUSB_BULK and i setup device drivers. it recognized name is Qualcomm HS-USB QDLoader 9008 (com6). i tried a lot of way to unbrick but no result. i read alot of topics, i applied so many unbrick solutions but i have failed. because i cant find appropriate topic about my device. i tried another similar device’s topics. sorry my bad english. can someone help me about this device?
also my friend has same device with running android os. maybe it can be useful to unbrick my device.
sheva728 said:
hi all. plz help me about Zte q802cdma. while i upgrading lollipop update,i took an error at the setup and device not start. volume+ with power button : comes device logo to the screen.and dissappear in 3 seconds. volume- with power button: comes device logo to the screen but not load anything and logo appears forever.
volume+ and volume- with power button (if connected to pc) : device manager finds a device called name QHSUSB_BULK and i setup device drivers. it recognized name is Qualcomm HS-USB QDLoader 9008 (com6). i tried a lot of way to unbrick but no result. i read alot of topics, i applied so many unbrick solutions but i have failed. because i cant find appropriate topic about my device. i tried another similar device’s topics. sorry my bad english. can someone help me about this device?
also my friend has same device with running android os. maybe it can be useful to unbrick my device.
Click to expand...
Click to collapse
Greetings!
Thank you for using XDA Assist.
Please consider posting your question here:
http://forum.xda-developers.com/showthread.php?t=2259645
That is a friendly help thread where you're sure to find expert advice.
Good luck!
Related
Hi all
3 days ago I got my Umi eMax mini and after just one day it wouldn't boot. It can enter emergency download mode (edm), but no recovery or fastboot. It was running default rom and only some apps and settings were changed on the phone.
When I enter edm the computer registers as a Qualcomm HS-USB QDLoader 9008 and I can see it in QFil and alike, but not with ADB and Fastboot.
Does anyone have any ideas as how to flash something like TWRP/CWM or just default rom so I can get the phone working again?
If you need any more info I'll do my best to get it.
Thanks in advance...
Thank you for using XDA Assist!
I got this answer from @joel.maxuel where he answered a similar question (from you maybe?) in this thread.
Some devices (Like Samsung), don't have an accessible fastboot - putting preference on download mode instead. But I haven't seen any bad consequences of trying to access fastboot when it's inaccessible.
I would suggest going to this thread to ask (can copy and paste), your device experts can be found there:
> Android Development and Hacking > Android General > UMI EMAX MINI 64bit Octa Core FHD 4G Smartphone
Hope this helps, and good luck!
I have a bricked ( I am not sure) max908 model phone. The phone was bricked because I have tried a rom of Lenovo which was for MT6572 chip as mine. When power button is pressed it only show start logo of Lenovo and nothing happened.
Then I have used spflush tool and custom rom which are available for max908 on internet and it shows some error like BROM ERROR.
And when power button is pressed it shows only the logo of Maximus.I don't know what should I do. Please help me.:crying::crying::crying:
Hello,
Welcome to XDA.
Try posting your question in the link below.
http://forum.xda-developers.com/android/help
The experts there may be able to help. Good luck.
my lg exceed 2 is bricked by installing twrp.. no power, no recovery, no download mode.. i finally got computer to see phone as qualcomm hs-usb QDLoader 9008 (com4). i also got software QFIL to see phone in Download Mode but cant seem to to get it to repair and ESF Professional Qualcomm NV Tools to see phone in Online Mode but can not repair im not fimilar with these two software's so that might be a reason.. With QFIL i have problem with Programmer Hex saraha but does see phone in Download Mode. With QualComm NV Tools it detects phone in OnLine Mode and Mobile Model ID as "FFA/SURF 7630 (NAND)" and SPC is rejected by phone.. i can change phone modes with Qualcomm NV tools if that can help.. LGFlashTool and BoardDiag 3.99 does not see phone.. can someone please help me its going on a month bricked and phone still has service.. i did root phone with kingroot before installing twrp which bricked my phone. Also phone does disconnect and reconnect to pc every so often..
Hello and thank you for using XDA Assist,
please ask you question in our Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards
Trafalgar Square
XDA Assist
Hello,
I was using Samsung Galaxy S3 SCH-I535 and tried to install a custom recovery named "LOCKWORKMOD" and unfortunately I failed.
Recovery mode was not working and displaying error that found on device is from another source and system can not start. (DAMAGED RECOVERY!)
Secondly, I used EZ-UNLOKER to my boot-loader but things went from worse to worst for me. After choosing , the never turned on after turning it off. I CAME TO KNOW IT IS HARD BRICKED.
Samsung GalaXy S3 SCH-I535 VERIZON.
: 4.4.2 KitKat
No charging.
Not turning on.
When is connected to PC via USB it shows new device detected named, RELINK HS-USB QDLoader 9008 (COM1).
I want to re-flash my with correct files to get it back to life but for doing this I need help.
1. Flash tool and procedure.
2. Required files for flash.
Please help me regarding this issue.
Hi HassanMujtaba000
Thank you for using XDA Assist
We were able to determine that you have already posted your issue here. It would be convenient that you give some time for our experts to analyse and answer you. Therefore, I will be closing this request here.
If you feel that it's taking too much, you may create a new thread at the below forum addressing our experts there.
Verizon Galaxy S III Q&A, Help & Troubleshooting
Thankful for your understanding.
Nice regards and good luck.
THREAD CLOSED
.
HassanMujtaba000 said:
Hello,
I was using Samsung Galaxy S3 SCH-I535 and tried to install a custom recovery named "LOCKWORKMOD" and unfortunately I failed.
Recovery mode was not working and displaying error that found on device is from another source and system can not start. (DAMAGED RECOVERY!)
Secondly, I used EZ-UNLOKER to my boot-loader but things went from worse to worst for me. After choosing , the never turned on after turning it off. I CAME TO KNOW IT IS HARD BRICKED.
Samsung GalaXy S3 SCH-I535 VERIZON.
: 4.4.2 KitKat
No charging.
Not turning on.
When is connected to PC via USB it shows new device detected named, RELINK HS-USB QDLoader 9008 (COM1).
I want to re-flash my with correct files to get it back to life but for doing this I need help.
1. Flash tool and procedure.
2. Required files for flash.
Please help me regarding this issue.
Click to expand...
Click to collapse
Hi All,
I tried to flash my LYF Flame 1 via QFIL, I don't know why, but for any reason I got an error to complete the flashing.
I think I bricked my phone.
Now my phone is not responding anymore.
No charging, no power-up, nothing......
Only, when I connect the phone with laptop, i got qualcomm hs-usb diagnostics 900e driver.
and QFIL Error : Download Fail:Switch To EDL FailFailed to Switch to Emergency Download mode
Please help me to unbrick my phone.
Thanks
Hi there and welcome to assist,
Unfortunately there is nothing about your question/device on XDA forum. Try a Google search first.
Good luck